TAS not defaulted in sales order

This is a third-party order. In spro, i haved configured as following:
Order type "TA" + item cat Group "BANS" + Usage (blank) + High level (blank) =
DfItC "TAS", MItCa "TAN", MItCa "TANN", MtCa "TAW"
Questions:
1. TAN iso TAS was defaulted when sales order creation.
2. Question 1 remained the same, even i changed Usage, High level.
Pls help solve. Thx.
ps. the material is configurated as BANS.

>
cathy liang wrote:
> This is a third-party order. In spro, i haved configured as following:
> Order type "TA" + item cat Group "BANS" + Usage (blank) + High level (blank) =
> DfItC "TAS", MItCa "TAN", MItCa "TANN", MtCa "TAW"
>
> Questions:
> 1. TAN iso TAS was defaulted when sales order creation.
> 2. Question 1 remained the same, even i changed Usage, High level.
>
> Pls help solve. Thx.
>
> ps. the material is configurated as BANS.
HI Cathy,
Everything seems ok except your order type, you say you have configured Order Type "TA"
Is it a customized order type created by your project because i dont think TA is a standard order type.
If Order type TA is present make sure that You created Sales Order using Order Type as "TA".
May be you used some other order type while creating the sales order like OR.
Hope it helps
Regards
Abhishek

Similar Messages

  • Billing Block in Customer Master does not default into Sales Order (VA01)

    I put a billing block into the customer master but it is not defaulting the billing block when I create a new sales order for that customer.  Do you have any tips please for what could be wrong?

    Hi,
    The billing block you set in customer master or by XD05 is not meant for to flow in sales order(flow to va01).
    That is meant for block customer for sales/delivery/billing
    If you want this block default in va01 then you can set it for document type by VOV8
    Kapil

  • Not Updating Open Sales Orders Value for CreditManagement

    Hi Frendz,
    This is the first time am implementing creditmanagement in my system tested simple credit limit check working fine.
    Now testing Static and Dynamic(Automatic) it also working fine but Its not caliculating open sales orders value either static or dynamic while Creating s.o, settings made clicked on open s.o, i have already created sales orders value of 10th.
    EX:- customer balance is 2lacs, credit limit is 1lac while creating s.o it always showing balance 1lac only(Instead of 1lac10th) with open sales order value  is 10th.
    Let me know Where i have missd settings.
    Hari Prasad

    hello,
    it is maintained against the cr control area in ent structure.
    one needs to change there.
    r u in prd system or development?
    becoz if prd, then this change will effect a lot of ongoing docs.
    rgs,
    AK

  • Error when trying to create a delivery note from a sales order -  Internal error (-2010) occurred

    Hi
    I am trying to create a delivery note form a sales order in B1 V9 PL8 and I am getting the following error -
    Internal error (-2010) occurred
    The code has been working but we seem to be getting problems now
    Can anyone suggest anything please ?
    Copy of the code attached
    Thanks
    Andy

    Hi Andrew,
    Try replacing this line:
    odel.Lines.BaseLine = lineno - 1
    with this:
    odel.Lines.BaseLine = oorder.Lines.LineNum
    Beni.

  • Header condition type value not displayed in sales order output

    Hi gurus,
    I have observed a strange issue regarding a header condition in a sales order.
    we have a set up like following:
    1. If the Header condition XXXX is used in sales Order then this value should be printed on sales order output.
    2. If the Header condition mentioned in above point is not maintained in sales order it should print the total price of all line items.
    Though i have maintained the header condition value in Sales Order Header its not displayed in SO output.
    That is , I have a sales order and it has one HEADER condition type entered with 3500 USD.
    In fact this value is used for some business purpose and is being printed on the sales order output for a specific output type.
    But where as in a sales order this header condition value is not getting printed on the output though I am using same data as of the sales order which is having the header condition value printed on its output.
    According to business,we must have the header condition value printed on  sales Order output.
    Please suggest how to proceed.
    Thanks in advance.

    Not sure if you are using costom smartform to print invoice, if yes then ask developer to debug and find the root cause and fix it.
    You might need to give him condition when it shuld be printed and when not.
    You can take reference of another output type for which it is printing

  • Unit Cost is not Populating in Sales Order Line Level for OPM Enabled Org

    Dear All,
    This is to inform you that Unit Cost is not populating in Sales Order Lines. Ideally it should pick from OPM financials, but whenever i am running Cost Update it is throwing error. We need to pull out Unit Cost for Sales Analysis Report. Please suggest on the same ASAP. What are the steps needs be followed to populate the Unit Cost. Please suggest.
    Thanks & Regards,
    Patrick

    Hi
    I think it will pick from PRICE list. Why don't to you try by keeping this item in the mentioned Price list.
    Regards
    Raj

  • Partner determination functions are not determine in sales order

    Dear Sap Gurus,
    I have made a new partner function (P2) and have been configure it in partner determination procedure, although i hv made new customer master for the same account group. All th partner function are showing in the customer master data but these are not determine in sales order, one error is coming...this partner procedure is not defined.......kindly give me advide how to resolve this problem.
    Regards
    Parul Deshwal

    Hi
    Have you assigned the Partner determination procedure to your sales document type?
    Also have you assigned the Partner function to your Partner determination procedure.
    Also do the same to the sales order item partner determination
    regards
    Prashanth

  • Condition type not coming in sales order

    Hi,
    we have a condition type Z026. The issue is that  it is not set in the order but the condition records exists. The pricing analysis shows that condition reocrd is missing but the fact is the condition record is there. The acess seq is Z026 and there are many tables in the acess sequence.
    The first table in the access seq is 906 and the condition record exists but still the system says that the condition record is not found using  cond preliminary step (header fields like customer/sales org/div). the cond record is maintained for  relevant sales org/dist channel/customer/material. cond preliminary step means that system first looks for the header fields but everything is there.
    The condition is active and the conditon is created on 21.7.10 with validitity from 21.7.10 to 31.1.2010 and the pricing date in sales order is 27.7.10. so everyhting is fine but yet the condition is not coming in sales order
    what could be the issue.
    regds

    Hi,
    Now try creating a sales order with 20.07.2010 as the pricing date. It will work. Create another order with 21.07.2010 and it will not work. If so, it is due to the validity date. When you give 21.07.2010 as validity date and there is already another record which was valid on that date, the gap of one day can happen and we have experienced this. There is even an OSS note explaining this concept, which makes sense business-wise.
    However you check the scenarios I have mentioned. If the behaviour is as I have mentioned, then you have to change the pricing date of your problamatic sales order to one day earlier, or move the validity date one day earlier.
    If the behaviour is different, pls lemme know

  • Customer not displyed in sales order

    Hi all,
    I'm facing problem with customer not displyed in sales order. While i'm creating sales order sold to party and ship to party fields both are grey mode ( fileds are not accepting any values). I set up partner detemination procedure for customer, sales header and item level. I don't know where i did wrong . Please solve my problem as early as possible.
    Thanks & regards
    Kesav

    Dear Kesav,
    Did you assign Partner procedure to sales document header??
    Please do this Go to SPRO>SD>Basic Functions>Partner Determination>Set Up Partner Determination-->Set Up Partner Determination for Sales Document Header
    Here select the Procedure and then click on Partner Determination Procedure Assignment and assign procedure to sales document type.
    Thanks,
    Raja

  • Tax condition(JVAT) of ship to party is not triggering in Sales order

    Hi,
    Tax condition(JVAT) of ship to party is not triggering in sales order...
    Scenario:
    Tax condition types:
    JCST- CST Payable
    JVAT- VAT Payable GJ
    Customer Tax classification for JVAT in OVK3:
    1-  VAT 4%
    A- VAT 0%
    B- VAT 2%
    Material Tax classification for JVAT in OVK4:
    0-Tax Exempt
    1-Full Tax
    In CMR for
    Sold to Party:1001(Mumbai), In Sales Area Data(Billing Tab),we have
    Country/Name/Tax category/Name/Tax Class./Descrption
    IN / INDIA / JCST  / CST Payable / 1 / CST 3%
    IN / INDIA / JVAT / VAT Pay GJ  / 1 / VAT 4%
    In CMR for
    Ship to Party:2001(Gujarat),In Sales Area Data(Billing Tab),we have
    Country/Name/Tax category/Name/Tax Class./Descrption
    IN / INDIA / JCST  / CST Payable / 1 / CST 3%
    IN / INDIA / JVAT / VAT Pay GJ  / A / VAT 0%
    Access Seq:   JLST
    Condition table : 368(Country/Region of Del Plant/Region/Tax class1-Cust/Tax Class1-Mat)
    Condition record maintained for JVAT as IN/GJ/GJ/1/1 as 4%
    Condition record maintained for JVAT as IN/GJ/GJ/A/1 as 0%
    Now the sale(Shipping to) is happening in Gujarat..
    In sales order
    I entered SP:1001 and SH: 2001
    When i check the pricing in sales order,condition type JVAT is triggering 4% which is not true as it as to pick 0%
    Kindly guide me where i went wrong...
    Regards
    Azeez.Mohd

    Hi Friends.
    I found the solution...
    Its customization mistake..
    Solution:
    When we have 'n' tax categories then we should have 'n' condition tables..
    I have 2 tax categories: JCST and JVAT but i have only one condition table 368 which is wrong.. i should have 2 condition tables.. so i created another con. table 468 and assigned to access aeq JLST.
    then when i create cond. record , we have to select the appropriate table then it will fetch accordingly.. in sales order..
    with regards

  • Subinventories not listed in Sales  Order Line

    Hi Gurus,
    Need your help for the below issue.
    I enabled Subinventory field (through Folder>Show Filed) in the Sales Order line. But, when I click the LOV there were no subinvnentories listed. The inventory org is listed correctly. I tried with different OUs and also inventory orgs, but no use. I had created Storage subinventories only. The subinventory has stock on the item I entered in the sales order line.
    Any feedback on this would be highly appreciated.
    Thanks in advance.
    Prasad Dhanakodi

    Hi,
    Doc ID: Note:737575.1 (Metalink)
    Sub-Inventory Entered On Logistics Line Does Not Populate in Sales Orders
    Hope this doc might give you some help.
    Thanks,
    Gaurav

  • Condition type value not update in sales order

    Hello Guru's
    As per the  sales order in VA01 the condition type value i.e surcharge value is not updating in sales order.
    But I have maintain the condition record(Surcharge)also and in Condition technique I have checked every thing is correct .
    please find below I have attached the Screen short .
    Please give me solution Asap.

    Hi Sukdev,
    Have you checked the respective pricing procedure for From and To reference step maintained against the condition type ZSUR?
    Regards,
    T.R.S.Praveen

  • VL10C double delivery notes for one sales order

    Dear all,
    Currently we encountered an very strange issue in our SAP.  we found that via VL10C, SAP create two duplicated ourbound delivery notes for one sales order, which resulted in a double items and amount in the billing document. These two deliveries notes are complete the same, which were created with 7 sec interval via VL10C. Check in the sales order, we can see delivery Qty was double against order Qty for all the items.
    does anyone have a clue on this issue? your effort and feedback will be most applicated!
    Thanks & Best Regards,
    Kyo NG

    Hi,
    I forgot this possible cause. Check Note 61148 - VL04 VL02 AME807 AME815: Insert to table VETVG and related notes, specially Note 931297 - VL10x, VL10HU - Duplicate entries displayed in STO.
    Regards,
    Eduardo

  • VAT/CST NOT COMMING IN SALES ORDER

    Hi Expert,
    Before updation of excise duty my Vat/cst is coming and working well, but after mainitin chapter id or excise duty my VAT/CST condition is not comming in sale order, Vat codition is JIN7 & CST JIN8. but we Analyse pricing procedure in sales order its not show. here taxprocedure is TAXINJ is ok. conditin type utxj is also maintaind by tax code.
    Regards,
    S.Rahman

    Make Sure Tax Conditions are properly maintained in the combination of Tax Procedure (TAXINJ) and Tax Code as well as check your settings in the pricing procedure you have maintained for these condition types.
    Regards,
    Ashutosh

  • Billing Plan Start Date not copied to Sales order from Service Contract

    Hi
    We are developing a process of Creation of Service Contract and then a order confirmation.
    Now based on the Order Confirmation will bill based on the Bill Plan.
    The Bill plan start date in contract header is not flowing to Sales Order header while creating with reference.
    Then navigating to Header Billing plan and if we input the date the billing plan dates are displayed.
    We checked the copy control settings and seems like the date is not copied.Is this a standard behaviour.
    If so then do we have any work arounds to achieve the same. Because the contract start date can change before confirmation.
    So business wants a sales order confirmation to be created after contract creation and bill periodically as per the Sales order instead of contract.

    Hi,
    Appreciate ur quick response. But instead of FKDAT i need the FPLA-BEDAT to be flowed to Billing Plan.Right now iam entering the following date manually at header.Instead if it copies from Contract header then manual entry could be neglected.
    Is it possible with the same routine to code with the above mentioned FPLA-BEDAT.

Maybe you are looking for