Tascam US600 (not found) on mac os 10.8.5

bonjour
j'ai un problem avec ma carte de son sur MacBook pro os 10.8.5
j'ai installé les drivers disponible sur le site internet après avoir lire le manuel dans le disque fournie avec la carte audio US600
redémarrage j'ai branché la carte est le contrôle panel m'affiche (not found) merci de me répondre le plus vite possible.

Was the outside source the link at the bottom of this page? If so, that did not work for me.
http://https://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html #

Similar Messages

DocumentBuilderFactoryImpl not found Printing Mac OS X

OS - Mac OS X 10.3.6
Java - 1.4.1_01
I'm attempting to print a report generated by Jasper Reports in a Java Application. I select the print button in the frame, and the print dialog for Mac OS X appears. I select "Print" and the following exception appears in the console ...
Exception in thread "Thread-1" javax.xml.parsers.FactoryConfigurationError:
Provider org.apache.xerces.jaxp.DocumentBuilderFactoryImpl not found
        at javax.xml.parsers.DocumentBuilderFactory.newInstance(DocumentBuilderFactory.java:99)
        at net.sf.jasperreports.engine.util.JRStyledTextParser.<init>(JRStyledTextParser.java:145)
        at net.sf.jasperreports.engine.export.JRGraphics2DExporter.<init>(JRGraphics2DExporter.java:152)
        at net.sf.jasperreports.engine.print.JRPrinterAWT.print(JRPrinterAWT.java:263)
JavaAWT: Assertion failure: Java exception thrown
JavaAWT: File src/macosx/native/apple/awt/util/AWTException.m; Line 40
JavaAWT: Assertion failure: _javaException
JavaAWT: File src/macosx/native/apple/awt/util/AWTException.m; Line 48I discovered the following in the API about the FactoryConfigurationError which is seen in the stack trace..
public class FactoryConfigurationError extends Error
Thrown when a problem with configuration with the Parser Factories exists. This error will typically be thrown when the class of a parser factory specified in the system properties cannot be found or instantiated.
I have included the following in the Classpath in my Manifest:
jasperreports-0.6.2.jar itext-1.01.jar commons-logging-1.0.2.jar commons-beanutils-1.5.jar commons-digester-1.3.jar commons-collections-2.1.jar xerces.jar
And I had been using the following System property for the parser...
System.setProperty("org.xml.sax.driver", "org.apache.xerces.parsers.SAXParser");I have discovered though that Mac OS X JRE version 1.4.1 (bundled within the operating system itself) contains the Crimson implementation of JAXP 1.2. As indicated in this thread:
http://forum.java.sun.com/thread.jspa?forumID=34&messageID=2031200&threadID=448102
This may be what is causing my problem. Although the xerces jar is on the classpath, it may be that the Crimson is being used or should be used instead(?) So I tried setting the parser to use the Crimson Driver with no success..
System.setProperty("org.xml.sax.driver", "org.apache.crimson.parser.XMLReaderImpl");Also unsuccessfully I tried explicitly setting the System property for the DocumentBuilderFactory as suggested here:
http://developer.apple.com/documentation/WebObjects/XML_Serialization/Transformation/chapter_5_section_4.html
System.setProperty("javax.xml.parsers.DocumentBuilderFactory",
"org.apache.crimson.jaxp.DocumentBuilderFactoryImpl");But the same exception as previously posted is thrown.
I have no troubles printing reports in the same manner on Windows or Linux. Usuing the same Manifest, classpath, jar files etc..I have only seen the error on Mac OS X. Any help would be appreciated. Thanks so much.

I agree with your observation: removing xerces.jar from the classpath fixes the printing problem, but the XML parsing speed is something like 4-5 times slower (1.4.2_05, 10.3.7, PowerBook 1.5GHz, 1Gb) with the default XML parser than using Apache DOMParser explicitely... my application can print, but the rest of the XML manipulations is terribly slower. Great! : (
--j

[AIR] File Not Found in MAC OS but Works in Windows

Hi All
I have an htmlFolder in my "src" which contains html files. What I do is, that at runtime i render the html File in <mx:HTML id="htmlView"> using the following code.
htmlView.location = "app:/htmlFolder/sub-folder/fileName.html";
Problem ->
This works fine in windows, but does not work in MAC OS. Probably because windows uses folder structure, not sure about MAC OS, but i guess it installs as a single file containing sub-folders hidden from user. Does anyone knows a solution to it?
Thanks and Regards,
Ahmed.

Thanks Atif and Barna Biro... thats what I am already doing
var file:File = new File(File.applicationDirectory.nativePath + "htmlFolder/sub-folder/fileName.html");
htmlView.location = file.nativePath;
and have also tried the following, as mentioned by Atif
var file:File = File.applicationDirectory.resolvePath("htmlFolder/sub-folder/fileName.html");
htmlView.location = file.nativePath;
but what I have noticed is that it actually finds out the file.. because there is another file, a db file, which does not need to be rendered on html, is picked u perfectly, is updated, and everything can be done to it.
So the problem is rendering of HTML
in mac............... how do we render local html files ??? Why local.. because i was able to open up youtube.com

BootCache.playlist not found my mac, won't start up

After installing BootCamp, my mac would get stuck on the grey bootscreen. After booting into verbose mode, I discovered that the bootcache.playlist was missing. I tried manually generating it in single usermode, but was given the error no blocks found. What can I do?

Autumnsky910 wrote:
What can I do?
reinstall the OS

Airport Time capsule not found on mac when using AirPort Utility

I just purchased an AirPort Time Capsule to back up my files from my Mac. I have been able to set up the wireless portion, but when trying to access the backup portion through TimeMachine I cannot select my base. I am able to see it on my iPhone, but not on Mac. I have updated everything. Is this a known problem with the transition to Yosemite? Any suggestions?

Dead spot on.. Yosemite is pain plus..
I recommend you start over in your TC setup..
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.

"disc burner or software not found" on Mac OSX fixed by repair permissions!

This was a hard thread for me to find so I am posting an answer as a topic...
For any Mac OSX users having this issue, do a repair permissions using disk utility and it should allow you to burn CDs again.
Whew.

You may need to replace the PRAM battery. Anytime it is over 4 years old, it can make the optical drive act up.

Tascam US-122 MK II not working with Mac Mini

This seems to be a common issue for many people for many years, but I have not found anyone with this exact problem...:
I am using the Tascam US-122 MK II audio interface with my Mac Mini (latest model). I have connected everything correctly, have installed the correct drive (first from the provided disk, then when that didnt work, from the web).
The device is powered and seems to be working. I can see in System Preferences that the mini picks up the signal coming from the US-122 ( a guitar ).
I have then attempted to use it with GarageBand. I have set the input to pick up the US-122. But there is no sound. Garageband registers no input at all, there is no sound at all, and there is also no out sound from the phones on the device. Having checked with Tascam, the problem doesnt seem to lie with the device.
Has anyone had a similar problem? Could it be that I have to reboot in 32 bit? I don't see why this should be the case.... Thanks!

Thanks. This doesnt seem to have helped, but has made me notice something.
In Audio MIDI Set Up under Audio Devices, I am not able to select the US-122 MKII for sound input: that field is not highlighted. I can only select for sound output, which is of no use...! I have absolutely no idea why, even though it recognises the device, it will not allow me to select it for sound input. Any ideas? Thanks again.

"File not found" error when I try to render an animated menu (on mac) Encore CS4

I'm making a dvd with at least 2 animated menus. It means that I have a 1 movie in the background of each menu. Over my background, I have 3 thumbnail buttons which contain a small piece of movie animated movie too. When I try to to view my menus, in order to see the animation in the background and in the thumbnails I need to render the animation through File - Render - Motion menus.
The problem is that it works for the first menu but then when I continue my navigation to the second menu that has animation in background and thumbnails too, if I choose Render Motion menus,after 3/4 of the rendering it says "file not found" even if all the files are well in place in their folders.
Does anyone would have an idea of how to resolve this stupid problem that prevents me to burn my project on a DVD since the same errors will appear during the burning process (I use a mac with Encore CS4). Is it a bug? What are the solutions? Thanks for answering.
Steven.

SteveDVD,
The use of the .WMV was because that was part of the Library .EM template. I would not anticipate problems with other formats, so long as they are supported and the same for all of your Menus in the Project.
If you have done several Motion Menu Renderings, you might want to clear Encore's Media Cache, just in case it is still referencing previous Render files.
And yes, the re-Importation should yield the same result as Linking/re-Linking.
Unfortunately, I do not have CS4, so I can't test this for you. There do seem to be a few real Bugs in the various CS4 programs, and maybe this is one?
That "File Not Found" rings a bell in my feeble brain. Seems that there was a post on that, but I do not remember it being related to Motion Menus. Maybe search will yield something of use.
Good luck,
Hunt

FireFox isn't working right on my Mac. Sometimes it won't load at all( says server not found) and sometimes pics and video won't load. If I switch to IE or safari it works fine.

I just got a Mac ( I have always had a pc) and I loaded the most update version of Firefox on it. Many times during the day I will go to a website and it will get a "Server not found" message. I can't refresh the page and fix it, but if I go to IE or Safari the webpage shows up fine. It's not just the webpage cause it is never the same one and it can happen to any site. Also when using Firefox there are many times when I go to a page and not all the pics load or if there is a video on the page the video doesn't load. Again if I then go to IE or safari everything is there and works fine. I have uninstalled and reinstalled FireFox and nothing changed. I cleared my cache, cookie, history and still nothing. I love firefox so this is really frustrating. Any help please.

Did you ever fix this, because I am having the same problem

I have a mac book air, and i bought a LG portable cd drive, which is suppose to burn cds. but they software cd that was included with the lg cd/dvd writer doesnt load. and i want to burn a cd from itunes but it says " burning software is not found"??

so i bought a mac book air, and i had to buy the LG portable cd drive... which is supposed to burn cds? the lg cd/dvd writer came with a cd but it wont load onto my computer when i plug the usb cord in. all i want to do is burn a cd from itunes but it says " burning software not found" but the LG cd drive says it will burn cds?? im confused please help!

You dont need ANY CD/DVD burning software on your Mac
Just plug in your LG DVD/CD player and follow the below instructions
http://support.apple.com/kb/HT1152

Mac Client Certificate not found

Hey all, i'm trying to install the ConfigMgr client on a mac system. The site is 2012 SP1 RTM however since there is no release yet of the mac client i'm using the mac client install from the SP1 beta install folder (Suggested by Microsoft)
I followed the instructions on how to install clients on mac computer from technet. Everything from the install and the enrollment seems to complete fine no errors. After the enrollment when I open System Preferences > Configuration Manager it says "Certificate
not found" If i check the ccmclient log file on the mac it shows the following errors
Failed to Parse MgmtAuthority ServerList
Failed to get server list
Failed to GetProperty Mode from Configuration Provider : 80070490
Requested certificates not available in store
Certificate not found in store. Bailing out!
Failed to validate certificate
The certificate shows up under system in the keychain, the only strange thing is it shows for name the user who enrolled in the certificate. I figured it should have showed the system name. The root ca is also there. Any help would be appreciated, thanks

Okay so figured this out, and i'll post in case this happens to someone else. The certificate will always show under the keychain with a name of whoever the user was that did the enrollment. So if you used Joe Smith, then the certificate will be called
Joe Smith. In my case the account I used to enroll had a active directory display name of two words such as "Joe Smith" Because of this space in between, configuration manager client kept listing the certificate as "Joe". I was then realized that indeed just
like the error said the certificate could not be found because its looking for Joe and the the certificate says Joe Smith. The fix was instead do the enrollment with a normal account with no spacing in the name. This may be a bug or Microsoft may not recommend
creating AD accounts with display names with spaces.

I am getting a 404 not found message on my mac before the web page closes down

I am getting a 404 not found message on my mac before the web page closes down. How do I fix this?

Is it an internal or external web page? Does this occur on all web pages? If not, post the URL of one that 404s.

My mac is the OS X 10.8.3. I tried to update the latest Adobe flash player and kept getting 'Actionlist not found.' I have uninstalled, enabled and disabled plug-ins and am still unable to download the update and now have no flashplayer at all. Help!

My mac is the OS X 10.8.3. I tried to update the latest Adobe flash player and kept getting 'Actionlist not found.' I have uninstalled, enabled and disabled plug-ins and am still unable to download the update and now have no flashplayer at all. Help!
PS I'm still new to Macs so the more broken down the better.

Adobe Flash Player 11.8.800.42 is the most recent version from Adobe. It is a pre-release version. I am using it without any noticeable problems.
The current stable version is Download 11.7.700.169.

Files not found after migration to new Mac

Hi,
On my old Mac, under Snow Leopard, my installation was complete and everything worked fine.
Then, when I bought a new Mac (with Mountain Lion installed) I had to use Migration Assistant to restore my Time Machine Backup, which included my Logic Pro installation.
Now when I try to use Logic Pro I often get these "Audio file ... not found!" messages (see example).
How can I fix this?
Many thanks!

Thanks for the link! Instead of un-installing and re-installing everything, I noticed that in GarageBand (which I normally don't use) there was an update/additional download available. After doing it I noticed that this had fixed nearly all missing-audio-file-problems in Logic Pro: when checking for missing instruments by creating a new instruments project everything was complete again on 2 of our 4 Macs (pre 2012 models) -- on the other 2 Macs (late 2012 models) only the following 3 ( ! ) files are missing:
/Library/Application Support/GarageBand/Instrument Library/Sampler/Sampler Files/...
.../Seventies Kit/DC Tit Hat 08.aif
      (of EXS24 Instrument "Seventies Kit.exs")
.../Liverpool Bass/IL Btl Bass bomb 08.aif
      (of EXS24 Instrument "Liverpool Bass.exs")
.../Steinway Grand Piano/Steinway Pedal V1/Stw ped v1 024.AIF
      (of EXS24 Instrument "Steinway Piano.exs")
So we copied the 3 missing files into the same directories on the 2 newer Macs, but it seems Logic doesn't "see" them and therefore still says that they are missing:
How can I help Logic to find these files?

Hi i exported a photo form mac book pro to an external hard disk then i can not found it did i lose my photo

hi, I exported photo from my mac to external hard disk an now I did not found the photo in the HD did I lost it and if it possible how can I retain it back . thank you for your help.

If you know the name of the photo, search for it using the name. If you don't and have Time Machine or other backup, locate the photo and you should be able to get the name.
Ciao.

Tascam US600 (not found) on mac os 10.8.5

Similar Messages

Maybe you are looking for