Task activities not getting generated properly in BPEL

I am using the Jdev 11g TP3 (from OTN). Installation went through fine. However I observed a interesting issue with HumanTask/BPEL and I was wondering if someone faced similar such problems before, if so, how to rectify the issue. Here is the description of the issue:
1. Created a Empty SOA composite project
2. Dragged and dropped BPEL Process in the component palette. Designed a Asynchronous process.
3. Dragged and dropped a HumanTask. Did not expose as an composite. Designed a single approver workflow. In the project schema, choose the schema from BPEL input.
4. Wired BPEL to HumanTAsk
5. In the BPEL flow, I dragged the HumanTask to the flow. Everything appears to be correct. I clicked on "Ok" after associating with BPEL variable.
Now when I examine the BPEL flow, a scope before the BPEL switch is empty. There are no BPEL activities generated. This is a very simple case of BPEL and HumanTask and I am not sure as to why the tasks not getting generated properly in BPEL flow.
Has anyone experienced this issue or any ideas as to why this could happen?

After going through the exercise several times, I finally found out the reason as to why the BPEL activities are not getting generated. In the Human task form for the title, since it is a fixed string in my case I put something like the one given below:
Title : "APPROVE ORDER"
When you have fixed string within double quotes it does not generate BPEL activities correctly. You can try and u will see the problem.
My real question is should not throw proper error message when you try to drag and drop the HumanTask to BPEL flow.

Similar Messages

Nohup.log files are not getting generated correctly

hai,
im a weblogic administrator. Here is my problem in weblogic. My partner has complained that nohup.logs are not getting generated properly. Like for every 5 mins a new nohup .log file is getting generated. But almost 4 to 5 logs are of 0 size and after that the 6 log file is very hug ( around MB). And the status of the managed servers is in FAILED state. When i checked the nohup logs, i can see "E297: Write Error In Swap File" and also the below error. But when i checked the disk space it is only 30 % full. Please suggest me something that can help me in this. Why is this behavior in the nohup.logs? have anyone faced anythign like this? Please help me.
But after the recycle everything is fine. But i want to know what went wrong and why it got recovered after the recycle.
<Feb 11, 2010 7:43:59 AM CST> <Error> <HTTP> <BEA-101246> <Error occurred while flushing HTTP log file for the Web server: wl38_managed1
java.io.IOException: Disk quota exceeded.
java.io.IOException: Disk quota exceeded
at java.io.FileOutputStream.writeBytes([BII)V(FileOutputStream.java:???)
at java.io.FileOutputStream.write(FileOutputStream.java:260)
at com.wily.introscope.agent.probe.io.ManagedFileOutputStream.write(ManagedFileOutputStream.java:423)
at weblogic.utils.io.DoubleBufferedOutputStream.flushBuffer(DoubleBufferedOutputStream.java:58)
at weblogic.utils.io.DoubleBufferedOutputStream.flush(DoubleBufferedOutputStream.java:157)
at weblogic.servlet.logging.LogManagerHttp$FlushLogStreamTrigger.trigger(LogManagerHttp.java:522)
at weblogic.time.common.internal.ScheduledTrigger.run(ScheduledTrigger.java:243)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:229)
at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:223)
at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:50)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

according to error message, your partition size have not enough disk space from where you are running nohup command. check with df -kh.

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

Email Notification is approved but BPM Task is not getting completed

Hi,
   A transaction is submitted, the approver gets a email notification. The Human task is Actionable.
   So in the email, approver can see Approve / Reject links. On clicking the links it generates a email response and it is sent to the server also.
   But the task is not getting approved.
   Do we need to check any settings in the server or task?
   Thanks for your help.
   Chacko

..

Urgent!! PL/SQL web service can not get output param in BPEL

OC4J 10.1.2 generate PL/SQL web service can not get output param can not get output param in BPEL when call a pl/sql webservice.
wsdl as follow:
<types>
<schema targetNamespace="http://db.func.getqf/COMMON.xsd" xmlns:tns="http://db.func.getqf/COMMON.xsd" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<complexType name="db_func_getqf_COMMONUser_getqf_Out">
<all>
<element name="pnqfysOut" type="xsd:decimal"/>
<element name="pnzqfOut" type="xsd:decimal"/>
</all>
</complexType>
</schema>
</types>
<message name="getqfOutput">
<part name="return" type="xsd1:db_func_getqf_COMMONUser_getqf_Out"/>
</message>

the wsdl which generate by OC4J is as follows:
<?xml version="1.0" ?>
- <definitions name="COMMON" targetNamespace="http://db.func.getqf/COMMON.wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://db.func.getqf/COMMON.wsdl" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd1="http://db.func.getqf/COMMON.xsd">
<documentation>WSDL for Service: COMMON, generated by Oracle WSDL toolkit (version: 1.1)</documentation>
- <types>
- <schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://db.func.getqf/COMMON.xsd" xmlns:tns="http://db.func.getqf/COMMON.xsd" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <complexType name="db_func_getqf_COMMONUser_getqf_Out">
- <all>
<element name="pnqfysOut" type="xsd:decimal" />
<element name="pnzqfOut" type="xsd:decimal" />
</all>
</complexType>
</schema>
</types>
- <message name="getqfOutput">
<part name="return" type="xsd1:db_func_getqf_COMMONUser_getqf_Out" />
</message>
- <message name="getqfInput">
<part name="param0" type="xsd:string" />
</message>
- <portType name="COMMONPortType">
- <operation name="getqf">
<input message="tns:getqfInput" />
<output message="tns:getqfOutput" />
</operation>
</portType>
- <binding name="COMMONBinding" type="tns:COMMONPortType">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc" />
- <operation name="getqf">
<soap:operation soapAction="urn:db-func-getqf-COMMON/getqf" />
- <input>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:db-func-getqf-COMMON" />
</input>
- <output>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:db-func-getqf-COMMON" />
</output>
</operation>
</binding>
- <service name="COMMON">
- <port name="COMMONPort" binding="tns:COMMONBinding">
<soap:address location="http://localhost:9700/plsqlgetqf/getqf" />
</port>
</service>
</definitions>

Early Watch Reports are not getting generated.

Hi Experts,
I'm new to Solution Manager.
We were getting EWA report regularly till last month in solution manager.
But for the past one month the reports are not getting generated and I'm getting the following error message.
Kindly help
The data for this session is overdue. Data has not yet been transferred from the associated satellite system.
Go to the Service Data Control Center (transaction SDCCN) in the satellite system and check why the data has not been sent.
Typical sources of errors are:
The RFC connection for the SAP Solution Manager system is not working.
The 'Task Processor' background job, which collects the session data, has been changed.
Problems arose while data was being collected (see the detail log for the task that collects the session data).
A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data.
Session number: 1000000000704
Thanks,
Shanahas

Hi,
The maintanance package is getting executed everyday. However, it is throwing some error.
I have checked the RFC connection and they are working fine.
Here with I'm attaching part of the log i got for the maintance package error.
Pls help
Maintenance Package completed
> Maximum number of retries reached ( 0003 )
Updating license data completed from destination SM_SOMCLNT100_BACK [Maintenance Package]
Error updating license data from destination SM_SOMCLNT100_BACK [Maintenance Package]
Retrieval of license data failed from destination SM_SOMCLNT100_BACK
> ( AGS_MK_GET_MAINT_KEYS )
> Function module for retrieval of license data not available on Solution Manager
Updating license data started from destination SM_SOMCLNT100_BACK [Maintenance Package]
Error refreshing service definitions from destination SM_SOMCLNT100_BACK
> Password logon no longer possible - too many failed attempts
> error reading function module interface BDL_DO_SESSION_REFRESH_NEW from SM_SOMCLNT100_BACK
> Re-entry after error
Refresh of service definitions started from destination SM_SOMCLNT100_BACK [Maintenance Package]
Refresh sessions from destination SM_SOMCLNT100_BACK finished [Maintenance Package]
> Sessions cannot be refreshed from destination SM_SOMCLNT100_BACK ( SOM , 0020312095 )
> Password logon no longer possible - too many failed attempts
> error reading function module interface DSWP_API_SESSIONLIST_GET from SM_SOMCLNT100_BACK
Refresh sessions from destination SM_SOMCLNT100_BACK started [Maintenance Package]
Refresh sessions from destination SDCC_OSS finished [Maintenance Package]
> Sessions are up to date
Refresh sessions from destination SDCC_OSS started [Maintenance Package]
> Not due, due every 7 day(s), last successful run 10.07.2011 21:20:24
Delete old session and log data :
Maintenance Package started
Thanks,
Shanahas

Spool not getting generated in OO ALV report

Hi,
I developed a report in which we are giving output in same selection screen through OO ALV.
But,when we are scheduling that report in background,spool is not getting generated.
Waiting for your reply.
BR,
Praveen

Hi Aparna,
I tried NEW-PAGE PRINT ON.
I am pasting source code extract below:
   IMPORT DATA = ME->IT_FINAL2 FROM MEMORY ID SY-CPROG.
    FREE MEMORY ID SY-CPROG.
    CHECK ME->IT_FINAL2 IS NOT INITIAL.
    CHECK LO_DOCK IS INITIAL.
    CREATE OBJECT LO_DOCK
      EXPORTING
        REPID = SY-REPID
        DYNNR = SY-DYNNR
        RATIO = 70
        SIDE = CL_GUI_DOCKING_CONTAINER=>DOCK_AT_BOTTOM
        NAME = 'DOCK_CONT'.
    IF SY-SUBRC NE 0.
      MESSAGE 'Error in Docking Control' TYPE 'S'.
    ENDIF.
    IF LO_ALV IS INITIAL.
      TRY.
          LO_CONT ?= LO_DOCK.
          CALL METHOD CL_SALV_TABLE=>FACTORY
            EXPORTING
              LIST_DISPLAY   = IF_SALV_C_BOOL_SAP=>FALSE
              R_CONTAINER    = LO_CONT
              CONTAINER_NAME = 'DOCK_CONT'
            IMPORTING
              R_SALV_TABLE   = LO_ALV
            CHANGING
              T_TABLE        = ME->IT_FINAL2.
        CATCH CX_SALV_MSG.
      ENDTRY.
CLEAR LR_COLUMN.
      TRY.
          LR_COLUMNS = LO_ALV->GET_COLUMNS( ).
          LR_COLUMN = LR_COLUMNS->GET_COLUMN( 'KSCHL' ).
          LR_COLUMN->SET_LONG_TEXT( 'Cond.Type' ).
CATCH CX_SALV_NOT_FOUND.
      ENDTRY.
NEW-PAGE PRINT ON.
        LO_ALV->DISPLAY( ).
        NEW-PAGE PRINT OFF.
I am not getting spool list while executing it in background.
BR,
Praveen

Reg:tasks are not getting displayed in the uwl mss for particular user

hi all
Tasks are not getting updated in the MSS under tasks tab for particular user in EP.can any one please share their exp and knowledge on this how to reslove it.
Thanks in advance.
Deepika

Hi Sateesh,
This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
Kai

MC.9 - spool is not getting generated

Hi Experts,
When i execute MC.9 transaction in foreground i am able to view the report output. but when i execute it in background spool is not getting generated.
Please provide me any solution for this issue.
Thanks
Pallavi

Hi
I have checked list of versions in the 'select version' button. But my question is when i select 'execute in background', it is not generated spool. Is there any relation between spool and version. If there is, please explain me what it mean and how it relates.
As i am new to this module i wanted to know it, in brief detailed.
Thanks
Pallavi

Transportation lane KEY not getting generated in the table

Transportation lane KEY not getting generated in the table
Hi folks,
The issue is like this :
We have a weekly workorders upload program from legacy systems to SAP-APO. The legacy planners send a .CSV file containing material-wise workroders. A customised zee program picks these quantities & writes them in Prod.planned keyfigures in SNP planning book. This process is done for the manufacturing locations only.
Lately workorders for two particular material M1 & M2 had failed to get upload. It gives the error 'NO VALID SOURCE OF SUPPLY COULD BE FOUND' in its Job log. We did some debugging & found that for successful materials the TRPID is getting generated in the table /SAPAPO/V_TRPROD whereas this TRPID is missing for M1 & M2. Why this is happening is our main concern. We tried deleting the PPM & creating this again, assuming that the PPMID is the precursor for generating this TRPID, but this yielded no results.
____ for successful upload______________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY of successfully loaded workorder
Enter
This gives the following results
TRPID = TRPID KEY
LOCFR = LOCID KEY for manufacturing location
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for successfully loaded workorder
( This seems a self-lane, i.e both TO & FROM location are same)
____ for unsuccessful upload________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for unsuccessfully loaded workorder
Enter
This gives the following results
Error = No Table entries found for specified KEYS
We are perplexed why this TRPID is not getting generated for these two particular material M1 & M2?
We have deleted their PPM & re-created them to cross-check if the PPMID KEY is the trigger for generating the TRPID key. This didn't work!
Please let us know in case someone faced a similar issue.
Many Thanks.
Kumar
Edited by: Blue Lotus on Jun 9, 2011 2:44 PM

Yes Anand.
We deleted the PPM & created it again, which didn't work.
Later on we deleted the product itself from APO & re-CIFed it from R3 & then re-created the PPM.
The PPMID which was missing earlier is now getting created! However no luck with the TRPID.
Why this TRPID is not getting generated in our only concern
Regards
Kumar

The html select box option is not getting displayed properly in IE11

The html select box option is not getting displayed properly in IE11
I have developed a website that has a select box drop down. The select box drop down is getting displayed properly in IE9. But in IE11, if I am selecting any option apart from the first one, the whole select box option is getting moved up in the page.
In IE11, if option 2 is selected, then the select options is getting moved up. But in IE9, if option 2 is selected, then the select options is getting displayed properly.
Please let me know the fix so that the select options are displayed in the same manner as in IE9.
Sorry but I am unable to upload images as this site is throwing some error

Hi Kevin Shen,
Thanks for post.
I tried above code in ie 11(version 11.0.9600.17633).
But it is not working. If you select option 2, and open select box then it open on the select box.
It should open below the select box.
Code for above:-
<select>
<option>1</option>
<option>2</option>
<option>3</option>
</select>
Sorry I could not attach screen shot. We have normal select box with three options. If we select option 2, it is showing option list on the select box. It is coming below the select box in ie 10 and other browse like chrome.
So what we should do, so that all options will come below the select box?
Thanks,
Yogesh Toke

Catalog id is not getting displayed properly in Foreign Language (French)

Hi All,
I have created a web service id for the external catalog and I have assigned the same to one of the user. The name of the web service id is getting displayed properly in the shopping cart creation screen when the language is English. But when we are changing the user language to Foreign language (French), the name is not getting displayed properly.
Could you please advise me if there any settings needs to be done in the parameters of the specific web service id. Thanks in advance for your help.

Hi,
Go to External Web Services and the select the web service ID. Then click on GOTO >Translation and select the language and enter the description of the web service as to be disaplyed while users log in French against the language.
Thanks,
Anshu

UWL : New tasks are not getting populated in the UWL

Hi Experts,
I<b> configured my uwl to my backend system , the completed tasks are getting populated in the UWL but the New tasks and in progress tasks are not getting populated in the UWL.(some thing strange).</b>
When i am trying to configure the universal worklist system ,its givin me a caution message as <b>System SHDCLNT012 does not support optimized delta pull</b> . where SHDCLNT012 is the system alias name.
Is this the problem for not populating the new tasks in the UWL?
Please provide me the solution..
Thanks & Regards,
Sateesh

Hi Sateesh,
This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
Kai

Proposals are not getting generated for BOM items in MD50

Hi Gurus,
I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
MRP type is PD in both materials.
When i run a MRP thru' MD50 after getting customer order.
it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
Please let me know the solution.
Thanx in advance
Regards,
Nagraj Vasmate

try to use strategy 20

TDS reversal entry is not getting generated at time of F-54

Dear All,
I have made down payment request through F-47 transaction code and down payment made by Transaction code u2013F110 (instead of F-48) and TDS is deducted at this point. There after I made invoice through MIRO / F-43 in which TDS is again deducted for whole invoice amount. I have cleared down payment through T.code F-54. But at this time TDS reversal entry is not getting generated and only customer account is credited and debited.
So in short TDS is getting deducted at time down payment and at time of Invoice for their respective full value.
Note: For TDS type on payment I have selected u201CCentral Invoice PROPu201D and we are not using business place and section code. Please help me.
Appreciate all expertsu2019 help ASAP.
Thanks ,
Manas kumar

Hai Manas,
If ur not using business place how can u get remitance chalana thats why first u can configure the business plance. I think ur already posted some entries its correct? In this case u will run this t.code business place update the previous entries i.e., J1INPP this is very useful to u
Regards
Madhu I

Task activities not getting generated properly in BPEL

Similar Messages

Maybe you are looking for