Task and resource management - Task confirmation from supervisor

Hello,
we are implementing TRM. We would to like give to th supervisor the possibility to confirm task using monitor. This can be useful in case of downtime of mobile devices.
Currently it's possibile to confirm from the alert monitor only the tasks with status force confirmation (status = 7). In this case from a WM pont of view the picking is already cofirmed and through monitor it's possibile to confirm the task and so the putaway from WM point view
So we need to develop a functionality that confirm task indipendently from the TRM status and WM status..
I found the function LTSK_TASK_CONFIRM but it seems that doesn't work.
Have you any suggestions for the functionality or sample code to launch the function module LTSK_TASK_CONFIRM?
i think it's very strange that SAP hasn't developed a method in order to confirm a task and then TO without using mobile device.
Regards,
Andrea

Hi Andrea,
Why don't you just use tcode LP00? You will log on to your device/resource element as if you are logging on to a scanner. This tcode then simulates the scanner screens on your SAP terminal and you can confirm all tasks as per correct scanning functionality.
Cheers,
Hein

Similar Messages

  • Sap wm task and resource management configuration

    Hello Experts,
    Can somebody give me configuration steps of "Task and Resource Mangement", Its urgent.
    Thanks in anticipation.
    Regards,
    Hari.

    Hi Hari Krishna,
    I am also in need of the configuration steps of "Task and Resource Management", Will plz arrange.
    Thanks in advance
    Sai Krishna

  • Activate the TRM (Task and Resource Management)

    Could you tell me where to activate the TRM (Task and Resource Management) in WM?

    Hi Stefanie,
    First, you create the TRM site in:
    SPRO>Logistics Execution>Task and Resource Management>Master Data>General Settings for TRM
    You can assign your TRM site to you warehouse number here:
    SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Assign Site
    And you can also activate/deactivate the interface WM-TRM for some Source Storage Types / Destination Storage Types / Movement Type:
    SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Control WMS-TRM Interface for Transfer Orders
    Then, you continue with the rest of TRM customizing work.
    Hope this will be helpful for you.

  • TRM (Task and resource management) extractor

    Hi people!!
    I would like to know, if is there some
    TRM extractor for sap bw, or what could be
    the procces to load TRM information in BW.
    Regards!

    Hi Stefanie,
    First, you create the TRM site in:
    SPRO>Logistics Execution>Task and Resource Management>Master Data>General Settings for TRM
    You can assign your TRM site to you warehouse number here:
    SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Assign Site
    And you can also activate/deactivate the interface WM-TRM for some Source Storage Types / Destination Storage Types / Movement Type:
    SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Control WMS-TRM Interface for Transfer Orders
    Then, you continue with the rest of TRM customizing work.
    Hope this will be helpful for you.

  • Task and Resource Management (TRM) - Replenishment/picking process

    Hello everybody,
    i need your help. We are implementing TRM module and we are facing issues with replenishment/picking process. We have storage location not HU Managed and wee have the necessity to create task bundle for picking/replenishment process.
    Every times TRM make a bundle, it seems that force to execute a pick&pack
    Regarding picking process when TRM creates a bundle it forces to specifiy a destination HU that will be inserted in the delivery as handling unit. So in this case we have no problem.
    But in the replenishment process we haven't a delivery and so the standard avoid the insertion of HU.
    The questions is:
    1) Is possibile to have bundle without pick and pack? .
    Thank you very much for your attention.
    Regards,
    Andrea

    Hi James,
    we haven't pick HU. I think that pick HU is only possibile for storage location HU managed. Our replenishment process foresees:
    1) Make a bundle of picking from different source bins until
    2) Make a bundle of putatway to different destination bins
    So in we are facing two main problems that are driving us crazy:
    1) The bundle in TRM works only in the pick and pack scenario. So in our warehouse replenishment (LP22) it doesn't work. A solution could be to make a cluster of task but  it's not possibile to managed it in a system guided way. Maybe we have solved this problem by forcing HU numbers in the standard fields even if don't exist at IM or WM level. It's a dirty solution, i know.
    2) Other problem is to manage a pick and drop. Operator could executed the picking bundle and then leave the mixed pallet in a drop-off point. Next an other operator has to scan the serial number of mixed pallet and put each material to a different bin.
    Stantdard system can create only one task with the mixed pallet composed to the final destination while we have the necessity ti have n task.
    I don't know if it's clear and someone could helps us in order to implement the scenario described above.
    Other problems is that it seems impossible to develop custom functionalities in TRM because frequently the next step in the Logical transaction is harcoded in the standard code
    Bye Bye,
    Andrea

  • Task and Resource Management

    HI SAP GURUS
    I have created a Transfer Order with 4 line items for 4 different materials. And I have created 4 tasks with reference to the same  TO in TRM Monitor. System is generated same group reference number for all tasks. Now how to assign this group reference number to a warehouse resource (worker) to create a task bundle?
    Thanks inadvance,
    Siva
    Edited by: siva.T on Aug 4, 2010 11:11 PM

    Hi Siva,
    Can you Resolve my Problem,
    While i am going to TRM Monitor to Create Task, There i am not getting any Inbound Delivery or Transfer Order.
    Can you tell me the answer...
    Thanks,
    Mukesh

  • Task and resource management wihout HU

    Hello everybody,
    i'm trying to customize the TRN module but i have a doubt...
    Is it possibile to use TRM without using HU? . I work in a storage location not HU managed.
    Thank you very much for your replies.
    Regards,
    A.

    Hi Andrea,
      Yes .. it is possible ..
      I am just learning TRM and I have just created a prototype without HU .. only with SU.
    Regards,
    Benito

  • Task and resource management without HU and SU

    Hi experts,
    I know that it is possible to use TRM with SU and without HU.
    Is it possibile to use TRM without HU and SU?
    Thanks in advance
    Regards
    M.

    Hi,
    Welcome you post on the SAP Business One Integration Technology forum. However, this may not be the proper forum for you. This forum is dedicated to SAP Business One. Please close your thread and post on a proper forum.
    Thanks,
    Gordon

  • Problem in Task and Ressource Management

    Hi Guruu2019s
    I am working on Task and Resource Management, configured the system as per the requirements for TRM, then created inbound deliveries and Transfer order for that deliveries the TO is not confirmed. But when I am executing the TRM Monitor and dragging thes site to inbound delivery number onto the transfer order, the TO do not exit in the TRM Monitor.
    Why itu2019s not coming any suggestion please.
    Thanks in Advance
    Regards,
    Sai

    Hi Sai,
    Please check the tabl entries in SE16 or similar
    1. Assigned the site to the WH number (T340DT-LOCAT)
    2. Activated TRM for the movement type/Storage types (T347A-KZINA)
    2. Turned two step confirmation on for source and destination storage types (T331_B-QUEIN  & T331_B-QUAUS)
    Can you see anything in LTRM TRM monitor (no selections = only enter site number) i.e. a delivery number or TO?
    If not please try:
    1 Transaction LTRCC
    2. Deleting the data delivery/TO and recreated it?
    If this does not help, I could take a look at you setup if you allow external access?
    Thanks James

  • Roles tasks and resources assignment

    Hi there.
    I'm working in CProjet and I need to complete role definition; I can define staf (STAFFING TAB) and assign task (TASK TAB).
    In TASK TAB I can create also association between role, task and resource; now, I seem that STAFFING TAB considers TASK TAB assignment, but instead no automatic workload distribution happen.
    It looks like no resources link exist between TAB...
    Any suggestion about?
    Thanks
    Luciano

    Hi,
    In Staffing tab there is required capacity and available capacity.
    Required capacity is given to role and that can be distributed in general tab if distribution activated to that role type.
    Available capacity will be associated with the resource and that is given during staffing.
    You can not distribute required capacity in staffing tab as it is taken from Role.
    Hope this will help you
    Regards,
    Karan Hon.

  • Project Management and Resource Management Reporting Views

    I am wondering if anyone would have and is willing to share some documentation they may have put together around reporting views related to Project Management and Resource Management modules. We are installing the projects suite and I have never done custom reporting out of these modules and would be interested in feedback or documentation anyone may have related to these or any offer of assistance or direction in designing the reporting views.
    Thank you in advance!
    Matt

    hello Tony,
    What I can say. Maybe you should use SAP PPM as a operational Project Management tool and integrate it with WBS elements and projects in SAP PS. Probably it will be the best solution for you.
    The second way is to use a second project structure for project management as you wrote, with different number of this project. So you will have 2 structures one for actual posting of costs and the second for rest management needs and statistical posting of costs. Probably you will need CO substitution for posting of costs to post costs on these 2 structures.
    There will be many other conditions to get right solution but I think this 2 ways are possible.
    Adam

  • Call function module in backgrouns task and in update task

    Hi Gurus,Pls crear me on the " <b>Call function module in backgrouns task and in update task</b>".
    how it works and waht is the link with LUW  releated to these .
    also heard that commit work statement aslo linked with this.
    Pls clarfiy me with expalnation of code.

    Hi sridhar,
    the explanation already given is correct and good. Small add-on:
    All functions called during one LUW with addition IN UPDATE TASK are stored together with their actual parameters in a temporary memory area. The moment a COMMIT WORK is issued, the functions are released to be executed by a so-called update task which is running in the background. This explains why functions called in update task never return anything, no SY-SUBRC and no export or table parameters If a function called in update task raises an exception or runs into an error the calling user will get an express message informing about this. Also, all database updates done by this update process are rolled back to keep consistency.
    This proceeding helps to keep database tables consistent and allows the user to keep on doing his work before all database updates are complete. You may have seen messages like "material will be changed" after saving. If you open the same material immediately, you'll get a message "object locked by...<yourself>". This means the update task is still running.
    Regards,
    Clemens

  • Assigning Role to a Task and Resource to a Task

    Hello Friends,
    In cProjects, I go to the below tab Projects > Resources > Tasks.
    Here I do an assignment of Role to a Task and assignment of Resource to a Task.
    Could you please tell me as to where does this information gets stored.(ie which tables).
    And could you pleae tell me as to how do we differentiate between the Task, Roles and Resources in the internal table created.
    Because the internal table consists of Task Guid, Participant Guid and Entity Guid.
    Thanks,
    Salil

    I can tell you the table where the the role assignments get stored . It is
    DPR_ENTITY_LINK.

  • Difference between Due Date for All Tasks and Duration per task in an approval workflow

    Hello,
    I'm starting to read up and learn about approval workflows in Designer 2010.  I am confused by the fields "Due Date for all Tasks" and the "Duration per task".  I understand that the Due date for all Tasks is the date that all
    of the tasks in the workflow must be completed by.  And I understand that the duration means each task has x number of days to complete.
    But I dont know whey we need them both.  If I have the task duration set to two days and there are 3 tasks involved, then wouldn't the due date be 6 days from the start?  Why would I have a due date for all tasks that is completely different than
    the sum of the duration of days for each task? 
    Please help shed some light!

    Hi Michelle,
    Due date for all tasks, this setting specifies the date by which all tasks are due. It’s used for serial and parallel
    task.
    Duration per tasks, this setting specifies the date by which an individual
     task is due, it’s used for serial workflow participants.
    Note, when you create an approval workflow, select task process participants(approvers oob approval workflow), we can also
    select once at a time(serial) or all at once(parallel).
    For more information, see
    http://office.microsoft.com/en-us/sharepoint-server-help/use-an-approval-workflow-HA101793831.aspx
    Best Regards.
    Kelly Chen
    TechNet Community Support

  • Command Line and Resource Manager

    When using the command line to compile a Robohelp project, is there a way to update the shared resources within the project before generation?
    For example, say you have Project1 and it is using snippet1 in that project. However, snippet1 has been modified in the resource manager (just say, for argument's sake, that snippet1 is also used in Project2, and you modified the snippet there and synced it to the resource manager). When you do a regular command line compile, the snippet is not updated.
    Is there a way to sync the snippets and images from the resource manager in the project before doing the command line compile (other than opening the project and syncing manually)? After all, if I have to open the project, there's no reason to command line compile since I'm already there and can just compile it from the project.
    Thanks!

    I don't think that is possible as, correct me if I am wrong, even within RoboHelp the images don't get updated automatically. It's something you have to do.
    It's a good point though so I suggest submitting a feature request.
    The more people who request a feature, the more likely it is to be actioned. Please follow this link.
    http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

Maybe you are looking for