Task and resource management without HU and SU

Hi experts,
I know that it is possible to use TRM with SU and without HU.
Is it possibile to use TRM without HU and SU?
Thanks in advance
Regards
M.

Hi,
Welcome you post on the SAP Business One Integration Technology forum. However, this may not be the proper forum for you. This forum is dedicated to SAP Business One. Please close your thread and post on a proper forum.
Thanks,
Gordon

Similar Messages

Activate the TRM (Task and Resource Management)

Could you tell me where to activate the TRM (Task and Resource Management) in WM?

Hi Stefanie,
First, you create the TRM site in:
SPRO>Logistics Execution>Task and Resource Management>Master Data>General Settings for TRM
You can assign your TRM site to you warehouse number here:
SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Assign Site
And you can also activate/deactivate the interface WM-TRM for some Source Storage Types / Destination Storage Types / Movement Type:
SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Control WMS-TRM Interface for Transfer Orders
Then, you continue with the rest of TRM customizing work.
Hope this will be helpful for you.

TRM (Task and resource management) extractor

Hi people!!
I would like to know, if is there some
TRM extractor for sap bw, or what could be
the procces to load TRM information in BW.
Regards!

Hi Stefanie,
First, you create the TRM site in:
SPRO>Logistics Execution>Task and Resource Management>Master Data>General Settings for TRM
You can assign your TRM site to you warehouse number here:
SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Assign Site
And you can also activate/deactivate the interface WM-TRM for some Source Storage Types / Destination Storage Types / Movement Type:
SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Control WMS-TRM Interface for Transfer Orders
Then, you continue with the rest of TRM customizing work.
Hope this will be helpful for you.

Sap wm task and resource management configuration

Hello Experts,
Can somebody give me configuration steps of "Task and Resource Mangement", Its urgent.
Thanks in anticipation.
Regards,
Hari.

Hi Hari Krishna,
I am also in need of the configuration steps of "Task and Resource Management", Will plz arrange.
Thanks in advance
Sai Krishna

Project Management and Resource Management Reporting Views

I am wondering if anyone would have and is willing to share some documentation they may have put together around reporting views related to Project Management and Resource Management modules. We are installing the projects suite and I have never done custom reporting out of these modules and would be interested in feedback or documentation anyone may have related to these or any offer of assistance or direction in designing the reporting views.
Thank you in advance!
Matt

hello Tony,
What I can say. Maybe you should use SAP PPM as a operational Project Management tool and integrate it with WBS elements and projects in SAP PS. Probably it will be the best solution for you.
The second way is to use a second project structure for project management as you wrote, with different number of this project. So you will have 2 structures one for actual posting of costs and the second for rest management needs and statistical posting of costs. Probably you will need CO substitution for posting of costs to post costs on these 2 structures.
There will be many other conditions to get right solution but I think this 2 ways are possible.
Adam

Hi, I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mail are not receiving. Mail queue showing Connection refused error. Please help me

I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mails are not receiving. Mail queue showing Connection refused error. Please help me
Thanks
GIRI

Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

Task and resource management - Task confirmation from supervisor

Hello,
we are implementing TRM. We would to like give to th supervisor the possibility to confirm task using monitor. This can be useful in case of downtime of mobile devices.
Currently it's possibile to confirm from the alert monitor only the tasks with status force confirmation (status = 7). In this case from a WM pont of view the picking is already cofirmed and through monitor it's possibile to confirm the task and so the putaway from WM point view
So we need to develop a functionality that confirm task indipendently from the TRM status and WM status..
I found the function LTSK_TASK_CONFIRM but it seems that doesn't work.
Have you any suggestions for the functionality or sample code to launch the function module LTSK_TASK_CONFIRM?
i think it's very strange that SAP hasn't developed a method in order to confirm a task and then TO without using mobile device.
Regards,
Andrea

Hi Andrea,
Why don't you just use tcode LP00? You will log on to your device/resource element as if you are logging on to a scanner. This tcode then simulates the scanner screens on your SAP terminal and you can confirm all tasks as per correct scanning functionality.
Cheers,
Hein

Task and Resource Management (TRM) - Replenishment/picking process

Hello everybody,
i need your help. We are implementing TRM module and we are facing issues with replenishment/picking process. We have storage location not HU Managed and wee have the necessity to create task bundle for picking/replenishment process.
Every times TRM make a bundle, it seems that force to execute a pick&pack
Regarding picking process when TRM creates a bundle it forces to specifiy a destination HU that will be inserted in the delivery as handling unit. So in this case we have no problem.
But in the replenishment process we haven't a delivery and so the standard avoid the insertion of HU.
The questions is:
1) Is possibile to have bundle without pick and pack? .
Thank you very much for your attention.
Regards,
Andrea

Hi James,
we haven't pick HU. I think that pick HU is only possibile for storage location HU managed. Our replenishment process foresees:
1) Make a bundle of picking from different source bins until
2) Make a bundle of putatway to different destination bins
So in we are facing two main problems that are driving us crazy:
1) The bundle in TRM works only in the pick and pack scenario. So in our warehouse replenishment (LP22) it doesn't work. A solution could be to make a cluster of task but it's not possibile to managed it in a system guided way. Maybe we have solved this problem by forcing HU numbers in the standard fields even if don't exist at IM or WM level. It's a dirty solution, i know.
2) Other problem is to manage a pick and drop. Operator could executed the picking bundle and then leave the mixed pallet in a drop-off point. Next an other operator has to scan the serial number of mixed pallet and put each material to a different bin.
Stantdard system can create only one task with the mixed pallet composed to the final destination while we have the necessity ti have n task.
I don't know if it's clear and someone could helps us in order to implement the scenario described above.
Other problems is that it seems impossible to develop custom functionalities in TRM because frequently the next step in the Logical transaction is harcoded in the standard code
Bye Bye,
Andrea

Difference in Resource management between PPM and MRS

We have SAP CRM opportunities, PS Projects (no networks), No Plant Maint, No CS, Resources around 600, multi skill set tracking, global resource management pool, CATS timesheet.
is it necessary to install MRS for resource management or is PPM RM functionality sufficient?

Hi Salim,
within PPM Resource Management you can staff resources to roles of the project and assign these to tasks. You can have a staffing directly within the project or there is a cross-project view in the Resource Management role of PPM. In PPM there are different scenarios who is allowed to staff (e.g. project lead, resource manager, extended process using candidate manager).
The demand on the role level can be defined either as a block without distribution (e.g. 40 days between 01.01.2013 and 31.12.2013) or distributed on monthly or weekly level (e.g. 2 days in Jan, 2 days in Feb).
Since MRS is a dedicated Resource Management tool there are additional functions in MRS.
It depends on your process if you require these in your scenario or nor. These addtional features e.g. include amongst other
- Graphical Visualization of the resource demands and staffings (see screenshot below)
- planning down to a daily level
- more flexible definition of multiple responsible resource managers
- optimized for handling of huge number of resources/requests
So as I wrote earlier it will probably not be possible to say what you should use without knowing the detail requirements.
Regards, Andrea

Command Line and Resource Manager

When using the command line to compile a Robohelp project, is there a way to update the shared resources within the project before generation?
For example, say you have Project1 and it is using snippet1 in that project. However, snippet1 has been modified in the resource manager (just say, for argument's sake, that snippet1 is also used in Project2, and you modified the snippet there and synced it to the resource manager). When you do a regular command line compile, the snippet is not updated.
Is there a way to sync the snippets and images from the resource manager in the project before doing the command line compile (other than opening the project and syncing manually)? After all, if I have to open the project, there's no reason to command line compile since I'm already there and can just compile it from the project.
Thanks!

I don't think that is possible as, correct me if I am wrong, even within RoboHelp the images don't get updated automatically. It's something you have to do.
It's a good point though so I suggest submitting a feature request.
The more people who request a feature, the more likely it is to be actioned. Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Insance Caging and Resource Manager Plan

I want to test the instance caging feature of oracle 11g database on Solaris Sparc 64-bit O.S. I have configured two rac dbs on a server which has 2 processors.
Now, i want to use over-provisioning technique for that CPU_COUNT is already set as 2 on both the rac databases. Now my concern is, i want to see how much cpu every instance is using.
Kindly suggest me some guide line for this.
Thanks and regards,
Kazmi

Hi kazmi,
Oracle Enterprise Manager 11g introduces more flexible alternatives to server partitioning to support resource management. Instance caging allows you to limit CPU count per instance and enables resource management that has more consistent support across operating systems compared to resource managers available in many operating systems. It also has lower administration overhead than traditional virtualization techniques.
Best regards,
Rafi.
http://rafioracledba.blogspot.com/

RAC and Resource Manager

I want to assign different plans to each node in a RAC.
Is this possible?
Thanks

Yes; you can create more services which map to different sets of instances in your RAC.
So instead of a 1:1 mapping between services and databases, you create multiple services on the one (RAC) database. Then assign different resource plans to those services.
See
http://www.oracle.com/pls/db102/ranked?word=resource+manager&partno=b14197
for an overview of the topics in the RAC documentation.
Cheers,
Colin

Sys_group and resource manager

Hello.
How much CPU % and at which level should I allocate to SYS_GROUP consumer group?
1. Should I allocate 100% CPU to SYS_GROUP at level 1 and distribute CPU at level 2 to users
2. Should I not mention SYS_GROUP in resource plan?

In setting up a resource manager plan it is very important that you set the system DBA's in the highest priority group for situations where it is needed the most. If your database started to get hung due to extensive queries and you as the DBA want to go in and diagnose or monitor the database then you wouldn't want your diagnostic queries to wait for CPU allocation. If you are not in the higher group and all the machine resources are busy then even login to the database could take a lot of time yet alone trying to diagnose or kill any query.
It is also important that if you set these accounts to the top most group then you should write very efficient SQL's to monitor your database (if you aren't using any standard product such as Enterprise Manager). Otherwise such could cause impact on the business queries.
Now the question regarding how much to assign them - it all depends on your business requirements. You have to design your own resource management as per the business objectives. In some situations people configure them as follows:
Level 1 - CPU 100% other directives UNLIMITED. Consumers SYS, SYSTEM, any other SYSDBA accounts and accounts like SYSMAN, DBSNMP
Level 2 - CPU 100% other directives either UNLIMITED or CONSTRAINEd. Consumers all other accounts in the database.
Or you can further split the users between Level 2 till last available level.
IF you don't mention the SYS_GROUP in your plan it will be categorized by Oracle as OTHER_GROUPS and will be given the least priority.
Edited by: syedleo on 12/07/2009 21:32

How to install window 7 or 8 in laptop without os..... and boot manager is missing and cd or dvd also in cd drive..????

Dear Sir Please Help me .....
I have Lenovo Laptop
I3 3rd generation, 2 GB RAM, 500 GB HDD, Integrated Graphic card.
this laptop have OS Window 7 and also is my mistake to format it....
then I install again but my system installation disk is 5 GB Only this again my mistake because in partion time I can 5 part
C - 5 GB
D - 146 GB
E - 200 Gb
and so on ...
But now I can't install in c because its only 5 Gb and I try to install other drive but system denied..
my laptop is without OS and also I can't install New OS in my laptop.....and also error is bootmanager is missing ........

Hi，
I think you can start your computer and long press F8 or other keys (depends on the PC model) to enter the BIOS, set the boot option, make the PC boot from CD\ROM Drive, then customize the installation, resize the partition, you can refer
to this video.
How to install and partition Windows 7
http://www.youtube.com/watch?v=PsveMWRdNxo
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Quality and WorkForce Management ACD data and some problems

I installed the Quality / Adv Quality Mgt. and than i installed workforce management services. I have access panels each service no problem. But, I constantly getting the following mail from WFO and I do not know how to solve
WFM2001
Message:
The Capture Service is failing to capture ACD data.
Action: Contact technical support.
Other problem; I can't see anything about my agents, teams or etc. when i open WFO web management page or Quality Manager Administration.
For example on WFO web management page, left pane, Agents menu, i can't see my CXX agents.
Last one, i need to WFO and Qualit Management Recording using documentation (how to use both programs ?)
Thx....

Hi
Documentation is here : http://www.cisco.com/en/US/products/ps8293/tsd_products_support_series_home.html
It would appear you haven't set up the SQL connection as directed in chapter 3 of the install guide.
Aaron

Task and resource management without HU and SU

Similar Messages

Maybe you are looking for