Task and Subtasks

Hi,
We have requirement like we want to split hours merntioned at task level to below level sutasks. User defines some 100 hrs at tasks and another user split that task in subtasks to distribute those 100 hrs. Now here if I use With summary option in project type, system is not allowing to split Task in subtasks since hours are already mainatained for the task.
Without summary option I am not getting summarization of hours at task level.
How to resolve this ... is there any way, by which we can all allow subtask creation even though hours are mentioned at task level with 'with summary option' or any other way to achieve the requirement.
Thanks
Pramod

Hi,
I guess the best would be to secure in your process that no hours can be input at a father node level, to avoid any misunderstanding and side-effects.
If you really want to keep that possibility, you could enhance standard method to allow the subtask creation thanks to enhancement framework, but then you will have to answer the question: which will be the master for the workload calculation?
In your sample case: would the 100hrs be erased by the subtask aggregation? Or?
Matthias

Similar Messages

What is a summary task and how do I create it?

In the cPro customizing (spro), there is a dropdown called "Task Hierarchy" in the detail settings for a project type. It has three different values
- None
- Without Summary Tasks
- With Summary Tasks
Does anybody know what the difference between the second and third option is?
How does a summary task look like, and how do I define with task is a summary task and which is not?

Hi,
from the online documentation:
Summary Task: A task in cProjects in which certain data from the subtasks is displayed in an aggregated form (for example, confirmed times and required qualifications). However, you cannot enter these values in the summary task.
You can only use summary tasks in bottom-up scheduling.
You specify in Customizing whether you want to use task hierarchies with or without summary tasks.
Hierarchies with Summary Tasks
Once you create a subtask for a task, this task becomes a summary task. Some activities can only be carried out for tasks that are not summary tasks. These include:
·        Confirming time
·        Entering qualifications
·        Assigning project roles
·        Planning work
·        Assigning cost and revenue rates
Some of the information from the subtasks is aggregated in the summary task.
Hierarchies Without Summary Tasks
You can perform all activities at any level of the task hierarchy. There are no summary tasks.
Kind regards,
   Florian

To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

Oracle EBusiness suite professions tasks and duties

Hello everybody
I inquire about something regarding Oracle EBusiness suite professions tasks and duties. I've tasked by my manager with writing a report lists the main tasks and key responsibilities for each of the following technical professions within Oracle E Business Environment:
1)-Apps DBA.
2)-Apps Technical Consultant (Apps Developer)
3)-Apps Business Consultant.
I've contacted Oracle Support recently via opening SR .But, They informed me that they don’t provide such information and therefore, they suggest me weather to contact Oracle Consulting to post here.
I would appreciate your help.
Sami

I don't see how you'd be able to integrate OAM with EBS unless you have the oSSO (assuming of course that you're not on the bleeding edge, per 975182.1).
We are running the same configuration and have setup the redirects in OAM policy. We setup specific context roots for each application, then use OAM policy to redirect. (for example, http://iwa-server/ebs redirects to https://ebs-server)
Unique authorization rule for each redirect, then a unique "policy" on the "Policies" tab for each redirect. Each Policy maps to the respective Authorization Rule.

My Mac is running INCREDIBLY slow, Kernel-task and LR, PS, PSE, etc. are not functioning well.

Hi! Been trying to follow a thread about the Kernel-task and slow Mac performance. I did download EtreCheck and ran the report. I am a photographer using LR 4 and Chrome is my main browser. Both Chrome and LR (or PSE, or PS or Xee (a photo viewing app) make my computer run beyond ridiculously slow. I have so much work to do for clients and I get stopped in the middle of editing and cannot move forward because my beloved Mac is having issues. I did go through several old apps and the Application Support and Prefernces and deleted what I could of what I knew "what was what". I would appreciate any help in getting my Mac back on track. Thanks!
- Amy
Problem description:
My Mac is running incredibly sluggish. Chrome continues to lag, and the spinning ball is ridiculous when I am working in LR. I did the EtreCheck and the report is below. I JUST cleared out my LR catalogs and now have just two folders in the catalog from a current wedding I am working on. I will have to consider using separate catalogs for my other genres or even smaller catalogs and just make a catalog for each client. Thanks for looking this over! I am so frustrated.
Amy
EtreCheck version: 2.1.8 (121)
Report generated March 14, 2015 1:38:01 PM CDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Click the [Adware! - Remove] links for help removing adware.
Hardware Information: ℹ️
    iMac (21.5-inch, Mid 2010) (Technical Specifications)
    iMac - model: iMac11,2
    1 3.2 GHz Intel Core i3 CPU: 2-core
    4 GB RAM
        BANK 0/DIMM0
            Empty
        BANK 1/DIMM0
            Empty
        BANK 0/DIMM1
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM1
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: Unknown
Video Information: ℹ️
    ATI Radeon HD 5670 - VRAM: 512 MB
        iMac 1920 x 1080
System Software: ℹ️
    OS X 10.8.5 (12F2501) - Time since boot: 3:36:47
Disk Information: ℹ️
    WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
        disk0s1 (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 999.35 GB (177.87 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    OPTIARC DVD RW AD-5680H
USB Information: ℹ️
    Wacom Co.,Ltd. Bamboo Pad, wireless
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Internal Memory Card Reader
    Generic External         2 TB
        disk1s1 (disk1s1) <not mounted> : 210 MB
        Archive 2TB (disk1s2) /Volumes/Archive 2TB : 2.00 TB (47.65 GB free)
    Generic Mass Storage Device
    Apple, Inc. Keyboard Hub
        Apple Inc. Apple Keyboard
    Apple Inc. Built-in iSight
    Apple Computer, Inc. IR Receiver
Configuration files: ℹ️
    /etc/hosts - Count: 15
Gatekeeper: ℹ️
    Mac App Store and identified developers
Adware: ℹ️
    Conduit [Adware! - Remove]
    Geneio [Adware! - Remove]
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.wacom.kext.pentablet (5.3.3 - SDK 10.8) [Click for support]
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.coresymbolicationd.plist [Click for details]
    [failed]    com.apple.wdhelper.plist [Click for details]
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
    [failed]    com.conduit.loader.agent.plist [Adware! - Remove]
    [running]    com.genieoinnovation.macextension.plist [Adware! - Remove]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.wacom.pentablet.plist [Click for support]
Launch Daemons: ℹ️
    [not loaded]    .plist (hidden) [Click for support]
        /usr/local/libexec/TorchUpdater /usr/local/libexec/TorchUpdater --hello=torch
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.genieoinnovation.macextension.client.plist [Adware! - Remove]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [loaded]    com.skype.skypeinstaller.plist [Click for support]
    [running]    com.xrite.device.xrdd.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
    [loaded]    com.facebook.videochat.[redacted].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [loaded]    com.Installer.completer.download.plist [Click for support]
    [loaded]    com.Installer.completer.ltvbit.plist [Click for support]
    [loaded]    com.Installer.completer.update.plist [Click for support]
    [failed]    com.mediafire.express.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
    [not loaded]    jp.co.canon.Inkjet_Extended_Survey_Agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN (missing value)
    Microsoft AU Daemon    UNKNOWN (missing value)
    Canon IJ Network Scanner Selector2    Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
    GrowlHelperApp    UNKNOWN (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Google Drive    Application (/Applications/Google Drive.app)
    ColorMunkiDisplayTray    Application (/Library/Application Support/Colormunki/Display/Tools/ColorMunkiDisplayTray.app)
    Spotify    Application (/Applications/Spotify.app)
    apple-scc-20131227-135420    UNKNOWN (missing value)
    Google Chrome    Application Hidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
    WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
    QuickTime Plugin: Version: 7.7.1
    JavaAppletPlugin: Version: Java 7 Update 75 Check version
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
    WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
User internet Plug-ins: ℹ️
    RealPlayer Plugin: Version: Unknown
Safari Extensions: ℹ️
    TelevisionFanatic
    Readability
    Produtools_Manuals_21
3rd Party Preference Panes: ℹ️
    Java [Click for support]
    PenTablet [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: NO - Auto backup turned off
    Destinations:
        Everything - 2TB [Local]
        Total size: 0 B
        Total number of backups: 0
        Oldest backup: -
        Last backup: -
        Size of backup disk: Excellent
            Backup size 0 B > (Disk size 0 B X 3)
    /sbin excluded from backup!
    /usr excluded from backup!
    /System excluded from backup!
    /bin excluded from backup!
    /private excluded from backup!
    /Library excluded from backup!
    /Applications excluded from backup!
Top Processes by CPU: ℹ️
         2%    activitymonitord
         1%    WindowServer
         1%    Activity Monitor
         1%    Google Chrome
         0%    ColorMunkiDisplayTray
Top Processes by Memory: ℹ️
    210 MB    mds
    189 MB    Google Chrome
    90 MB    Google Drive
    90 MB    Google Chrome Helper
    86 MB    Microsoft Word
Virtual Memory Information: ℹ️
    1.52 GB    Free RAM
    1.65 GB    Active RAM
    480 MB    Inactive RAM
    644 MB    Wired RAM
    1.92 GB    Page-ins
    16.91 GB    Page-outs
Diagnostics Information: ℹ️
    Mar 14, 2015, 09:58:17 AM    Self test - passed
    Mar 14, 2015, 09:53:54 AM    /Library/Logs/DiagnosticReports/Google Drive_2015-03-14-095354_[redacted].crash
    Mar 11, 2015, 02:33:04 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Google Chrome_2015-03-11-143304_[redacted].crash
    Mar 14, 2015, 10:04:09 AM    /Library/Logs/DiagnosticReports/Spotify_2015-03-14-100409_[redacted].hang
    Mar 14, 2015, 08:28:48 AM    /Library/Logs/DiagnosticReports/PenTabletDriver_2015-03-14-082848_[redacted].cr ash
    Mar 12, 2015, 12:56:47 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/ColorMunkiDisplayTray_2015-03- 12-125647_[redacted].crash

Several problems exist.
1.
Back up your Mac prior to making any changes to its file system. Time Machine has not been configured properly To learn how to use Time Machine read Mac Basics: Time Machine backs up your Mac - Apple Support.
2.
You inadvertently installed adware. You do not need to download or install anything to fix it.
For a description of how this may have occurred, how to avoid it in the future, and for Apple's recommended actions read How to install adware. Apple's instructions are linked in the Recovery Procedure near the end of that document. Read and follow them carefully. Pay particular attention to the easily overlooked passages directing you to restart your Mac when required.
3.
That Mac's Hosts file appears to have been modified. Fixing a modified Hosts file requires specific instructions. Apple Support Communities contributor and EtreCheck author etresoft recently added a User Tip discussing that concern, and how to correct it: Fixing a hacked /etc/hosts file

Email Notifications for both UWL Tasks and Collaboration Tasks.

Hello,
I want to configure Email Notifications for both UWL Tasks and Collaboration Tasks.
Could any one please give me the configuration steps.
Thanks in Advance.
Regards,
Sridhar.

Hi sri,
Refer the following threads
https://www.sdn.sap.com/irj/scn/thread?threadID=147316
https://www.sdn.sap.com/irj/scn/thread?messageID=315715#315715
https://www.sdn.sap.com/irj/scn/thread?messageID=1170132#1170132
Regards,
P.Manivannan

Email Notifications for UWL Tasks and Collaboration Tasks

Hi,
I want to configure Email Notifications for both UWL Tasks and Collaboration Tasks.
I done with the all the Configurations suggested in the below link:
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/706d054d-da24-2b10-f18a-fc82faf6468e]
But Email Notifications are not reaching the users Lotus Mail ID. Could any one please suggest me that i am missing any Configurations.
Thanks in Advance.
Regards,
Sridhar.

Hi Sridhar,
I created a Wiki page with usefull links to troubleshoot problems with the Email connectivity from KM:
https://wiki.sdn.sap.com/wiki/x/g4KmAw
Please see if it helps,
Robert

ActiveSync Tasks and Calendar

I cannot seem to get ActiveSync(AS) to transfer all of my tasks and appoinments from my desktop to my Treo 750. And...if I mark a task as completed on my Treo, it doesn't mark it completed on my desktop. I have Active Sync 4.2 and Outlook 2000, therefore I can't install AS 4.5 unless I go to Outlook 2003 or above. Should I try this? Spend another $100 on an already $400 phone!! I have already....
Reinstalled AS
Hard & soft reset multiple times
Looked under my AS options as to which unit overides which. It doesn't give me any ability to change any settings in my tasks.
I am ready to go back to just having a plain phone and PDA!!
Post relates to: Treo 750 (AT&T)

I had the same problem. Here is what worked for me. Open the mail app and delete your exchange account (Settings > Delete Account). Then re-add your Exchange account. After this my Exchange contacts showed up again.

Format of files for calendar, tasks and address book to export/sync

My idea is to sync the files that are used by TB/Lightning, to manage my calendar, tasks and the address book.
My question is, in which files calendar, tasks, address book are saved and which format do these have?
Do I NEED to export each of them, before managing them with another software? (Icedove and possibly Android)

When you export your calendar, it is in an .ics file, both events and tasks. The ics file is a text file which can be edited. RFC-5545 defines the format.
When you export your address book, there are two formats: CSV is comma separated variables, and can be input to a spreadsheet. LDIF is also a text file and is better for importing into another computer.
As far as syncing, I'm not sure what you have in mind, but Google is one way to share that data between devices.

After Importing Tasks and Memos | Let's Move them from Remember to Calendar? More Extra Steps

After grabbing all your Tasks and Memos from BB OS 7.1, all the entries go unfiled into the Remember App. This is nice, but not nice. Anyone writing code to export these to the Calendar App or within Remember to 'move' them to the Calendar App? Does this make any sense to be left to redo these tasks and memos that invariably and potentially become Calendar worthy in terms of absolute reminders in advance of the due date?
It would seem logical, that say, for example, that if your old memos become potential Tasks, both the tasks and memos in Remember are somewhat treated the same. So now to export them possibly into the Calendar app? What am I missing here?
What would be the work around here temporarily until code is written to take all of your imported tasks and memos from, say, OS 7.1, now inside the Remember App, and send them OPTIONALLY to the Calendar? Nothing I can see at the moment...
Sometimes Memos turn into Tasks, which then could lead to Due Dates/Appointments/Do-To's in the Calendar App IF so chosen. But there isn't a strong blood relationship between Remember and Calendar. If there is, someone advise.
Relationship: Remember<>Calendar (In other words, strengthening the gap between Remember and Calendar.
When you've a SLEW of old Tasks and Memos coming from the previous OS's...wow...
In my Old Bold 9930 I had over a thousand valid memos, and over 2,300 regular tasks, segmented. Now joyously and unfortunately in the Remember App, WHAT A "TASK" TO FILE THEM WITHOUT ANY EXPORT to the Calendar or for the new Calendar to receive them with open arms and bifurcate them accordingly. (Splitting the main into two parts yet having the bond between the apps as close as possible)...
Sad that the old Tasks in BB OS 7.1 now imported into the Remember App has to be copied and pasted into the Calendar App for the Reminder and Re-occurrences, etc. Am I missing something? What a daunting task for power copy/paste people on a full qwerty to a touch keyboard.
Fervently experimenting with QNX Developers on this one. Need a cognitive, logical thought structure here to make this alleged "smooth" transition from one baton to the next baton (OS 7.1 to BB 10 in this area). Dropping the baton won't win the race against the competition here...

Well, what I've done is just the opposite as far as Calendar to Remember as the Calendar has the "Share" function base. With an extra step or two and of a 'cleaning house' from the import from the old OS7.1, I've brought all my tasks and memos into the calendar and brought them back into their respective folder(s) inside of Remember.
You see, because the Remember app is so vast or initially treated as vast, if one is fast enought to power copy/paste while cleaning house, take all your memos, tasks, etc into the Calendar and sync Remember with the Calendar manually via the due date/time function in Calendar, then you've a precusor reminder due date in Remember, which then leads to your day's events in Calendar.
For me I've not doubled up on the amount of tasks and memos, but provided myself as a power BB user the ability to work around and strengthen the relationship between the two apps. If the due date is accurate on the Remember app (if chosen), you do get reminded that particular day, and on that particular day you can then revew the day's notes/memos from within the Calendar app, clean the task/memo house as you move along, and sit back until the code is written just for the reversal of what protocol I've taken here. Either way, you avoid third party apps, your passion for BlackBerry remains, and your productivity is elevated with BlackBerry 10.
A lot of people don't realize how powerful QNX is as I am working with QNX developers now with feedback within the ebb & flow of the code. Give less than three years through BlackBerry Evangelism, Philanthropic aspirations and more, and BlackBerry will take back a strong segmented market space and enhance the quality of lives for those who are loyal and believe in BlackBerry as a lifestyle. All BlackBerry, all of the time.

Synchronize multiple tasks and multiple boards with X-series USB devices

Hi all,
I am trying to figure out how to synchronize multiple tasks across multiple X-series USB boards (6353, to be precise).
I have to run a digital output task AND an analog output task on each board. All four tasks (the DO and AO on Board 1, and the DO and AO on Board 2) must be synchronized.
I know how to synchronize multiple tasks on a single board. I've been doing that for years. That works fine.
I know how to synchronize a single task across multiple boards (say, a DO task across 2 different boards). That works fine too.
For the life of me, I can't figure out how to marry the two. Everything I've seen, all of the examples, etc. assume you want to do one or the other, or that you have a RTSI cable available. Are there any examples out there that synchronize multiple tasks across multiple USB boards?
I tried exporting the AO clock signal from my master AO task to PFI12, and then using the signal on PFI12 to as the clock source for the remaining tasks (Dev1/PFI12 physically connected to Dev2/PFI12, and Dev1/PFI12 set as the clock source for Dev1's DO task).
I have also tried setting Dev1/aoSampClock as the source for Dev1's DO task.
Under both configurations, I invariably get error -89137 when I try to start the tasks -- required resources (PFI12) in use by Dev1/do/SampClock. I understand what the error is telling me. What I don't understand is why I'm receiving this error when I don't have any of my tasks configured to use the DO Sample Clock. It seems as though it is not possible to export a clock signal to a PFI line and simultaneously run a clocked digital task, even if the clock source for that task is specified as something other than the DO Sample Clock?
So, my question is, is it possible to do what I want to do? And if so, how do I do it? How do I configure a common clock source across multiple tasks running on multiple USB boards?
Hoping for insight from those wiser than I...
Diane
Solved!
Go to Solution.

Update: I decided to try using a counter as the source clock. One cannot use counter 0 to accomplish this, but it does appear to work with counter 1.
I'll take what I can get. Fortunately I have two spare counters. (Yes, I'm running counter tasks too -- 6 of them -- but they don't have to be synchronized.)
I have to add both digital and analog input tasks as well -- all synchronous with each other, but not with the output tasks since they'll be running at different sample rates. I hope I'm able to use a counter as the source clock for those as well.
My head aches.

Difference between Due Date for All Tasks and Duration per task in an approval workflow

Hello,
I'm starting to read up and learn about approval workflows in Designer 2010. I am confused by the fields "Due Date for all Tasks" and the "Duration per task". I understand that the Due date for all Tasks is the date that all
of the tasks in the workflow must be completed by. And I understand that the duration means each task has x number of days to complete.
But I dont know whey we need them both. If I have the task duration set to two days and there are 3 tasks involved, then wouldn't the due date be 6 days from the start? Why would I have a due date for all tasks that is completely different than
the sum of the duration of days for each task?
Please help shed some light!

Hi Michelle,
Due date for all tasks, this setting specifies the date by which all tasks are due. It’s used for serial and parallel
task.
Duration per tasks, this setting specifies the date by which an individual
task is due, it’s used for serial workflow participants.
Note, when you create an approval workflow, select task process participants(approvers oob approval workflow), we can also
select once at a time(serial) or all at once(parallel).
For more information, see
http://office.microsoft.com/en-us/sharepoint-server-help/use-an-approval-workflow-HA101793831.aspx
Best Regards.
Kelly Chen
TechNet Community Support

How to retrieve a due date from a human task and create a report in BAM with it

Hi.
I'm working with a BPM process, the requirement is that I have a human task and a working hours limit to complete it. For this purpose I created a calendar in the bpm workspace and I've associated it to a role that executes that human task. Now I need to know how can I pass it into a data_object in BAM in order to create a Dashboard that lets me know whether a human task was completed just in time.
I'm using Oracle SOA Suite 11.1.1.7.0
Thank you.

There's a correction to the code. For whatever reason doing it that way still sets it as a "remind me when" parameter. Use the following code instead:
tell application "System Events" to set FrontAppName to name of first process where frontmost is true
if FrontAppName is "Reminders" then
          tell application "Reminders"
                    set duedate to (current date) + (2 * days)
make new reminder with properties {name:"New Reminder", due date:duedate}
          end tell
else
          display dialog "failed to make new reminder!"
end if

Binding between Task and method dissappears

The binding between task and method is dissappearing .
I tried creating a new task altogether but still not working
kindly help
Edited by: kittu reddy on May 6, 2008 3:19 PM

I have Zmethod and i have done binding between the task and the method and
Task and workflow..
Binding between Task and work flow doesnt seem to Disappear
but the binding between Task and the method kept on disappearing
I have a Zmethod to Bus2091(delagated to Zbus2091)
with an import parameter and an export parameter
and now when creating the task and assigning the method the container elements of method are transferred to Task
and next i wen to binding eeditor and generated automatic binding:
From task to method
and method to task
with out errors and now on clicked green tick mark of the binding editor and saved the Task and now on checking back the binding editor
i find the binding disppearead

Mail for Exchange, new task and calendar entries

Dear All,
I am having a wonderful time with a brand new E71 plus the latest version of Mail for Exchange (2.09.158 as per the info screen on the device). It syncs fine with a Exchange 2003 server in that contacts, tasks and calendar entries (it is not supposed to sync mail as well) are properly downloaded and changes made on the phone are replicated back to the server on the next sync. The fun starts when I create a new task or calendar entry on the phone: Those are not created on the server at all. Another problem is deleting a task on the phone that was created on the server. For some reason the deletion does not show up on the server as well and the task remains there until deleted via Outlook. Has anybody seen this kind of behaviour? I cannot debug anything on the server, since it is a hosted solution from an ISP. Neither can I sniff the network traffic, since that is SSL encrypted. Any tips and/or work arounds are greatly appreciated.
Best regards,

bump.
still the same even with the latest version.

Task and Subtasks

Similar Messages

Maybe you are looking for