Task Assignment to Ggroup - Group Members Not Getting Email

I have a process with an approval activity with initial user selection set to a group rather than a specific user. I want all selected users to receive an email notification that a new task awaits them. When I assign to a specific user, the custom email template is sent to the user. When I assign to a group, the group members don't get the task assignment email.
How do I change that so that group members will receive email notification of task assignment?
Thanks in advance!
Eric

One possible solution:
You can use our Group Lookup component to get a comma-separated list of the emails of the members of the group. Then, in the step before the User>assignTask step, send the group an email. The only problem is that you won't be able to embed a link directly to the task, because the task doesn't exist yet.
Doc: http://avoka.dnsalias.com/confluence/display/Public/Lookup+DSC
Download: http://www.avoka.com/avoka/escomponents.shtml
To work around this problem, you can use the technique outlined here:
http://blogs.avoka.com/2008/10/20/customize-user-task-escalation-after-assignment/
http://avoka.dnsalias.com/confluence/display/Public/Customize+User+Task+Escalation+After+A ssignment
If you need more assistance, contact info-at-avoka.com
Howard

Similar Messages

  • Wage group is not getting updated in confirmation.

    Hi
    When confirmation is done through idoc ( type Conf21) then wage group is not getting updated in confirmation table AFRU.
    When confirmation is done through co11n then it gets updated.
    How to get it updated when confirmation is done through idoc.

    Hi,
    In we02 Kindly check if the required field is correct mapped in the IDOC.
    Reg
    DSk

  • We are not getting email for any of the two new profiles in Production environment

    We are not getting email for any of the two new profiles.
    The new rules for sending e-mail work when using the initial profile.
    Only works for F9 and choose manually the profile is being sent.
    But siebel writes the log of both the \ BIN \ sent as if it had sent.
    operation:
    Standards (Policies) were created in the Activities (S_EVT_ACT) and Contacts table (S_CONTACT). When Standards (Policies) are reached trigger actions (Actions). These actions are linked to sending emails.

    The SMTP Adapter don't just "through away" messages. If your Tracked Service Instances shows that a message was sent through the Port, I am pretty sure that a mail was indeed sent. 
    -Are you using Static- or Dynamic Port?
    Can you try to set the Send Port in "Stopped" state, and then send a message to it. Examine the message suspended in BizTalk, and if everything looks ok, then start the Port again and check that the message has disappeared from both suspended and running
    instances in the Group Hub.
    If so, quickly check the mail box, make sure that no spam-filters etc. are messing up your test.
    Morten la Cour

  • Sharepoint 2013 document library incoming email without attachment not firing event and not getting email

    sharepoint document library incoming email without attachment not firing event and not getting email
    If email contains attachment it works. Is there any setting in document library that will allow emails and eventhandler to fire with out attachment?
    MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

    What is the purpose of email sent to document library if no attachment. What document library will do what that email if it cant find attachment to save and create a spdoc object. If you want to store email/communication body then opt for site mailbox
    app.
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Not Getting Email Notifications

    Hi
    I have configured ns_emails.xml as follows.
    <EmailAccounts xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"
    EmailMimeCharset=""
    NotificationMode="EMAIL">
    <EmailAccount>
    <Name>Default</Name>
    <GeneralSettings>
    <FromName>Oracle BPM</FromName>
    <FromAddress>valid email id</FromAddress>
    </GeneralSettings>
    <OutgoingServerSettings>
    <SMTPHost>AIA Server IP Address</SMTPHost>
    <SMTPPort>25</SMTPPort>
    </OutgoingServerSettings>
    </EmailAccount>
    </EmailAccounts>
    Also I have configured system-jazn-data.xml and user-properties.xml appropriately but still I'm not getting Email Notification.The error details are properly getting transported to Oracle WorkList Application but still the notification is not working. Kindly suggest a workaround and also the possible reasons for this.
    Best Regards,
    Chandu

    We are using Oracle AIA Exception Handling feature. In the BPEL process , we have catch branches defined. From the catch brances we are invoking AIAAsyncErrorHandlerBPELProcess.
    In case of an exception , the instance of AIAAsyncErrorHandlerBPELProcess and AIAReadJMSNotification is being created. We have configured ns_emails.xml and user_properties.xml as per the documentation.
    Kindly let us know the issue.

  • My apple ID has stolen i asked for rest but i could not get email rest on my email.

    my apple ID has stolen i asked for rest but i could not get email rest on my email.
    <Email Edited by Host>

    The Best Alternatives for Security Questions and Rescue Mail
        a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
        b. Call Apple Support in your country: Customer Service: Contact Apple support.
        c. Rescue email address and how to reset Apple ID security questions.

  • Advising record (ADV - HSBC form) in DME file could not get email address

    Dear all,
    I have problems with DME file that Advising record could not get email that is maintained in vendor master data.
    Standard communication methods in vendor master data must be Emails.
    We use exit module to get this email for below fields:
    Email chnl se. flag
    Email address
    T-code DMEE -> Advising record
    (Attributes tab: Mapping procedures is Exit module.
    Source tab: value was entered for Exit function)
    We test once and got the expected result: email shown on DME file, in advising record.
    However, as I rechecked recently, we have no email shown (though Constant value 'ADV' shown).
    The form is active by the way.
    I do not know if I miss anything in configuration.
    Please advise.
    Thank you very much.
    Rgds,
    Linh

    Hello Linh,
    Did you manage to resolve this. I'm facing the same problem, not able to get the email address.
    Can you please provide the function module you used.
    Thanks,
    Srini

  • Can not get email after updating to 8.1.1! Deleted account and now cannot add as will not verify due to Apple something timeout messages? Any one else having problems?

    Can not get email after updating to 8.1.1! Deleted account and now cannot add as will not verify due to Apple something timeout messages? Any one else having problems?

    Hi tania184,
    Have you contacted your email provider to make sure there are no problems on their end? If they say their email servers are working properly, check the outgoing and incoming mail servers entries on your iPhone to make sure both are entered correctly. Enter the outgoing mail server even if the account setup indicates that is optional.

  • I am not getting emails - it says this iphone cannot be used because the apple mobile device is not started

    I am NOt getting email it says this iphone cannot be used because the Apple Mobile Device is not started

    This should help ya out -> How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Not Getting Emails - BIS Problems

    Hello there,
    I've had my 8330 (service provider: Bell Canada) since the Spring and yesterday I recieved a message saying:
    "SUBJECT: Action Required: Validate Password
    Validate the password for (myemail) in the BlackBerry Internet Service! Email messages from (my email) are not being delivered to your BlackBerry device. To resume receiving email messages from this email address, validate the password for (my email) in the BlackBerry Internet Service:
    1. Open your BlackBerry Internet Service account by completing one of the following actions
         * On the Home screen, click the Setup icon and click Email Accounts or Email Settings
         * Using a browser on your computer, visit the BlackBerry Internet Service Web Site
    2. Go to the Email Accounts page
    3. Edit (my email)
    4. Type password
    5. Click Save"
    I went through the Setup icon on my phone and went to Email Accounts. It says my email is invalid but there's a "Validate" button. I click that and it asks for my email password. I type it in and click enter and it says that my email is now validated. But I'm still not getting emails to my phone. I have no idea what could have prompted this, and I really don't know how to fix it!
    Can someone please help me? I'm so confused!

    Evergreen,
    On your BlackBerry device, go to:
    1. Options > Advanced > Host Routing Table > Menu > Register.
    2. Resend your service books from your carrier BIS site:
    From your handheld device:   http://www.blackberry.com/btsc/KB15402
    Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
    From your desktop PC:  http://www.blackberry.com/btsc/KB02830
    North American Carriers - scroll down to select your carrier
    WorldWide Carriers - Find your carrier on the list
    3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I am in Europe right now traveling and I can not get emails it's said can not connet to server

    I am in Europe right now traveling and I can not get emails it's said can not connet to server It's a iCloud problem? What do I do

    If you're sure you want to pay for this (it may be expensive!), go to Settings > Network and turn on Data Roaming.

  • User Group is not receiving email Sharepoint 2013 & Nintex workflow

    Hi I created circular workflow using nintex and sharepoint 2013 , now problem occur that User group did not receive email notification through web portal , sending individual email address working fine but user group is not receiving
    any email, not a single group is working now , to clear we used same workflow since last two years and all group received email earlier but now we are facing this issue since last 3 weeks. to resolve this we create new test groups and test but enable
    to send.
    looking for support to resolve this issue
    Regards

    This actually sounds like a problem that should be discussed on the Nintex forums, can you try over there?
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

  • Not getting email on MAcBook Pro, but receiving on iPhone. Getting message "Warning Recent errors logged" It repeatedly states "The Header From: address postoffice is not authorised - please go to control add PHP" But I only have 1 email address.

    I am suddenly not getting email on my MacBook Pro, but am receiving e-mail on my iPhone. I'm getting message "Warning Recent errors logged" It repeatedly states "The Header From: address <postoffice> is not authorised - please go to control add PHP" But I only have 1 email address. I'm afraid to add anything on since I don't even know what this other e-mail address is. What should I do? And would this definitely be the cause of my not receiving e-mail?

    I pressed check again and here is what appeared:
    CONNECTED Apr 04 19:03:02.511 [kCFStreamSocketSecurityLevelNone]  -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
    CONNECTED Apr 04 19:03:02.513 [kCFStreamSocketSecurityLevelNone]  -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
    CONNECTED Apr 04 19:03:02.526 [kCFStreamSocketSecurityLevelNone]  -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
    READ Apr 04 19:03:02.556 [kCFStreamSocketSecurityLevelNone]  -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
    +OK <[email protected]>
    READ Apr 04 19:03:02.563 [kCFStreamSocketSecurityLevelNone]  -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
    220 mail.hostingplatform.com ESMTP
    WROTE Apr 04 19:03:02.566 [kCFStreamSocketSecurityLevelNone]  -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
    CAPA
    CONNECTED Apr 04 19:03:02.568 [kCFStreamSocketSecurityLevelNone]  -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
    READ Apr 04 19:03:02.572 [kCFStreamSocketSecurityLevelNone]  -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
    220 mail.hostingplatform.com ESMTP
    WROTE Apr 04 19:03:02.585 [kCFStreamSocketSecurityLevelNone]  -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
    EHLO 192.168.1.4
    WROTE Apr 04 19:03:02.592 [kCFStreamSocketSecurityLevelNone]  -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
    EHLO 192.168.1.4
    READ Apr 04 19:03:02.610 [kCFStreamSocketSecurityLevelNone]  -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
    -ERR authorization first
    WROTE Apr 04 19:03:02.628 [kCFStreamSocketSecurityLevelNone]  -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
    USER [email protected]
    READ Apr 04 19:03:02.630 [kCFStreamSocketSecurityLevelNone]  -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
    250-mail.hostingplatform.com
    250-STARTTLS
    250-PIPELINING
    250-8BITMIME
    250-SIZE 65000000
    250 AUTH LOGIN PLAIN CRAM-MD5
    READ Apr 04 19:03:02.639 [kCFStreamSocketSecurityLevelNone]  -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
    250-mail.hostingplatform.com
    250-STARTTLS
    250-PIPELINING
    250-8BITMIME
    250-SIZE 65000000
    250 AUTH LOGIN PLAIN CRAM-MD5
    WROTE Apr 04 19:03:02.648 [kCFStreamSocketSecurityLevelNone]  -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
    AUTH PLAIN  (*** 44 bytes hidden ***)
    WROTE Apr 04 19:03:02.667 [kCFStreamSocketSecurityLevelNone]  -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
    AUTH PLAIN
    READ Apr 04 19:03:02.670 [kCFStreamSocketSecurityLevelNone]  -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
    220 mail.authsmtp.com ESMTP Sendmail 8.14.2/8.14.2/; Fri, 5 Apr 2013 00:03:02 +0100 (BST)
    READ Apr 04 19:03:02.671 [kCFStreamSocketSecurityLevelNone]  -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
    +OK
    WROTE Apr 04 19:03:02.691 [kCFStreamSocketSecurityLevelNone]  -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
    PASS ************
    WROTE Apr 04 19:03:02.698 [kCFStreamSocketSecurityLevelNone]  -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
    EHLO 192.168.1.4
    READ Apr 04 19:03:02.704 [kCFStreamSocketSecurityLevelNone]  -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
    235 ok, go ahead (#2.0.0)
    READ Apr 04 19:03:02.712 [kCFStreamSocketSecurityLevelNone]  -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
    334
    WROTE Apr 04 19:03:02.734 [kCFStreamSocketSecurityLevelNone]  -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
    QUIT
    WROTE Apr 04 19:03:02.756 [kCFStreamSocketSecurityLevelNone]  -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
    QUIT
    READ Apr 04 19:03:02.759 [kCFStreamSocketSecurityLevelNone]  -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
    +OK
    WROTE Apr 04 19:03:02.776 [kCFStreamSocketSecurityLevelNone]  -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
    QUIT
    READ Apr 04 19:03:02.799 [kCFStreamSocketSecurityLevelNone]  -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
    250-mail.authsmtp.com Hello pool-72-93-40-57.bstnma.east.verizon.net [72.93.40.57], pleased to meet you
    250-ENHANCEDSTATUSCODES
    250-PIPELINING
    250-8BITMIME
    250-SIZE 52428800
    250-AUTH CRAM-MD5 DIGEST-MD5 LOGIN PLAIN
    250-STARTTLS
    250 HELP
    WROTE Apr 04 19:03:02.808 [kCFStreamSocketSecurityLevelNone]  -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
    AUTH PLAIN ********************
    READ Apr 04 19:03:02.822 [kCFStreamSocketSecurityLevelNone]  -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
    +OK
    READ Apr 04 19:03:02.907 [kCFStreamSocketSecurityLevelNone]  -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
    235 2.0.0 OK Authenticated
    WROTE Apr 04 19:03:02.917 [kCFStreamSocketSecurityLevelNone]  -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
    QUIT

  • Not getting emails that are sent from outlook cliant

    i am not getting emails pushed or sent to my i phone 4s or ipad when they are sent from an outlook cliant base email they show on the server but not on the phone all other web emails work is there a fillter some were ?

    yes they will
    this is a feature of using IMAP email (iCloud, Google etc)

  • Not getting emails, emails i send dont show as sent

    hello
    i juss did the 2.0.2 upgrade for iphone.
    i have a password lock on the phone
    i am not seeing emails as sent when i send them, i am not getting emails.
    i just did a test email and sent it to myself, the email arrived on my laptop but not on iphone. i have my mail seetting set so that the emails are NOT removed from server for a week, so i dont know why i would not get or be able to send ees from the iphone.
    my mail seetings for new data are
    push - off
    fetch - every 15 mins
    i hvae a wifi signal at my house
    thanks,

    I have the same issue, apple support said to change my yahoo password but that did not work, this after I restored it 3 times restarted quit mail deleted account info 3 times Im at a loss

Maybe you are looking for