Task automatic  expiration and renewal

All,
How can I achieve a requirement for human task which expires after certain time and automatically renewal after certain time.
I verified in Expiration and Escalation Policy of '.task' file but I can either select Expire after or Renew after option not both.
Anybody has any idea ?
Regards,
Praveen

I have/had the 200 message plan that was auto renew monthly.  What they fail to tell you is that there is a maximum limit.  I had 8,900 message units from months of renewals and little usage. I thought nothing of it as long as I kept the account active with the monthly renewal.  First, AT&T texted that they would be doing an autorenewal, as usual, then a few days later I found that the renewal was unsuccessful.  I called as directed by the text to find out why.  Well, renweing would have put me over the 9,000 maximum limit and so their solution was to inactivte my message account, and all of my 8,900 units were taken away due to the inactivation. I argued for 50 minutes to a representative about how ridiculous this was and how AT&T essentially stole about $200 from me by taking away those units. I am still waiting to see how they resolve this issue.  In addition, I found out that there is also a limit of $500 that you may have on a Go Phone account.  If you go over that $500 limit, then the account will not extend, and thereby be inactivated and you lose your account. This is nonsense.  It is my money that I give and they take.  What business is it of theirs how I spend my money or if I use the phone service or features I pay for. It just makes no sense.  I hope that someone from AT&T sees this and responds.  I am kdp123

Similar Messages

  • Always Access Denied when choosing Automatically Enrol and Retrieve Certificates from MMC

    I am using 2008 R2 Certificate Services to issue certs across multiple forests (although don't let that muddy the waters).
    I have a need to issue certificates for use with s/ldap, so I have duplicated the Kerberos cert and removed all Intended Purposes other than Server Authentication and configured appropriate security to allow Domain Controllers/Domain Admins to enrol. 
    The certificate also requires CA Manager Approval.
    Everything looks good - I am able to enrol for the cert via the MMC, the request goes into pending, and I am then able to issue the cert.  However, when I go back into the MMC on the Server that requested the cert and choose All Tasks | Automatically
    Enrol and Retrieve Certificates, I choose the pending cert and then get Access Denied.
    On the issuing Server, I get an Event 21 in the App Log:
    Active Directory Certificate Services could not process request 8466 due to an error: Access is denied. 0x80070005 (WIN32: 5).  The request was for CN=server.domain.com.
    On the Server that requested the cert, I get an Event 9:
    Certificate enrollment for Local system was denied by servername\Issuing CA when retrieving the pending request for a SecureLDAPCertificate certificate with request ID 8466.
    The strange thing is, if I follow this procedure but using the certsrv website, it works fine and I can install the certificate.
    What am I missing?  Or is this one of those random quirks of AD CS?
    Any help is appreciated.

    Hi,
    Thanks for posting in Microsoft TechNet forums.
    According to the error messages you provided, this can be a permission issue.
    The method of Autoenrollment for a certificate depends on an Active Directory. Considering using Certsrv website was successful, the problem can be that the requester does not have enough permission to access the certificate template in Active Directory
    To autoenroll a certificate template, a user or computer must belong to a security group that is assigned the read,enroll,and autoenroll permissions.
    Only groups that are assigned these permissions are enabled for autoenrollment.
    Could you please answer the following questions for us so that we can troubleshoot the issue more effectively?
    Are the issuing CA server and the requesting CA in the same forest/domain?
    regards
    Ted

  • Automatic Creation and Confirmation of Warehouse Task in EWM 5.1

    Hello,
    We want an automatic creation and confirmation of the warehouse task in EWM 5.1 on the based of a delivery type and warehouse number.
    The scenario goes in this way... As soon as the inbound delivery is created/replicated in EWM, the creation and confimartion of warehouse request, warehouse task and warehouse order (all the transactions) should be called automatically. And the goods receipt should be posted.
    Can someone throw more light on the customizing/BADI/enhancements etc required??
    Thanks and Regards..

    Hi koen,
    I tried with the FM that you suggested...
    But somehow with the process type 'stock removal' gives an error...
    Is that that this FM will help to create a pick task for a particular outbound delivery--Tcode:/SCWM/TODLV_TO.
    how will this FM take the outbound delivery as an input?or it will be on the corresponding sales order number and item number as input?
    Being new EWM i require help on this..about how to go about creating the pick task for an outbound delivery which wil be equal to the warehouse request.
    Thanks in advance,
    Rashmi.

  • Hello, I have Acrobat XI Pro for which I pay by monthly subscription. Each month, for the past three months or so, at renewal time, I receive a note stating that my trial period has expired and I cannot open my Acrobat Files. I have telephoned three or fo

    Hello, I have Acrobat XI Pro for which I pay by monthly subscription. Each month, for the past three months or so, at renewal time, I receive a note stating that my trial period has expired and I cannot open my Acrobat Files. I have telephoned three or four times each time this happens and have been told that the matter has been resolved - it has not! At one time I had paid inadvertently for three account for Acrobat XI Pro running at the same time - I only need 1. I'm afraid that I may have just opened a second account by mistake in order to open my files. I repeat, I only require one account. Would you please advise and assure me that this matter has finally been resolved and that I will no longer receive these notifications each month..

    I don't work for Adobe but it seems to me you might be signing in to Acrobat with the wrong Adobe ID.
    Check the Adobe ID you use in Acrobat.
    Check this Adobe ID on Adobe's to make sure that it has an active subscription.

  • I have the program Adobe Photoshop Album Starter Edition 3.2 on my PC and some photos from a camera have transferred to it. It says the program has expired and cannot be renewed, how can I get my photos back?

    I have the program Adobe Photoshop Album Starter Edition 3.2 on my PC and some photos from a camera have transferred to it. It says the program has expired and cannot be renewed, I am unable to click on the photos. How do I get them back?

    Photoshop Album Starter Edition support withdrawal FAQ
    This will tell you where your photos are.

  • My card expired and I didn't renew my subscription...

    I had special pricing for education for only $20 a month. My card eventually expired and I never could find a way to change the card number. Now when I open the app, it says to renew, but sends me to a list of all of the packages they have. The $20 package I had is now $30 a month. Is there a way to renew my subscription at what I was already paying?

    Hi there
    We should be able to update the credit card details so that you can have the $19.99 pricing for the remainder of your 1 year commit.
    I'll arrange a call back to assist with this.
    Thanks
    Bev

  • How can I make sure my history doesn't expire and that I can transfer over places.sqlite?

    There's probably alot of questions on this subject asked already but I've gone over just about all of the possibly relevant ones that've been already asked and I still can't figure out what to do. I'm trying to move my complete history from an XP Firefox profile over to a Windows 7 profile on another computer. Do I just do it by copying the places.sqlite file within that XP profile over into my USB flash drive, then replacing the places.sqlite in the Winodws 7 profile with the one from the other one? And after the file's in the right profile will I be able to just view all the sites I viewed on the old computer on the new one's history dialog box? I only am transferring my XP history to my Windows 7 because I want to look at stuff several months back and it keeps expiring on me, even to the point of getting rid of a month of history a week or so ago. This brings me to my other point, I keep up fairly well with updating both of my Firefoxes but recently (and I think this was way, way after they updated the browser so the history isn't set to expire by days anymore) the history just isn't reliable anymore. My XP will not only expire older months of history faster and faster it seems, but individual websites at the end of each month will actually disappear as I view new ones, instead of it all staying in there and just expiring each old month as a whole. Also, random sites in every month scattered all over the list of URLs will just disappear, and random sites that I've only visited in the past couple days will insert themselves randomly into much older months of history, which makes it hard to figure out the URLs I've seen, this last one seems like a common problem from what I've read, and all of these problems seem to be slowly creeping into my Windows 7 as well when they were originally on only my XP. The thing is for a very long time my Windows 7 would keep every ounce of my history that I kept on it, unless of course I went through the Clear History process myself. Now it seems to be slowly deleting it and having all the other problems that I mentioned earlier. I've got 592 GB out of 931 GB that's free space on my Windows 7 that I want to transfer my XP history into, and my Control Panel System panel says I've got 8 gbs of RAM in total. If I need to get some other information on RAM mention how to do that if you could. So in total, how can I transfer my XP history over into my Windows 7 so I can view all the sites I viewed on my XP in my Windows 7 history panel, as well as view all the old expired and/or manually deleted history on my Windows 7, without worrying about whether it will expire itself while I'm viewing it and writing down the relevant URLs that I need to know about. If I can only keep all my history through installing an add-on, a link to a relevant legal add-on that'll work well on both operating systems would be appreciated. Thanks to all here. (:

    Hello Saethwyr99,
    ''Do I just do it by copying the places.sqlite file within that XP profile over into my USB flash drive, then replacing the places.sqlite in the Winodws 7 profile with the one from the other one?''
    you are correct : [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile#w_your-important-data-and-their-files Your important data and their files]
    ''Also, random sites in every month scattered all over the list of URLs will just disappear, and random sites that I've only visited in the past couple days will insert themselves randomly into much older months of history, which makes it hard to figure out the URLs I've seen, this last one seems like a common problem from what I've read, and all of these problems seem to be slowly creeping into my Windows 7 as well when they were originally on only my XP.''
    from Firefox 4 and above versions there is not a time limit for the history.
    Firefox determines automatically how many pages can be kept '''without affecting the performance.'''
    ''as well as view all the old expired and/or manually deleted history on my Windows 7''
    i think this in not possible
    ''If I can only keep all my history through installing an add-on, a link to a relevant legal add-on that'll work well on both operating systems would be appreciated.''
    check the next add-on : [https://addons.mozilla.org/en-us/firefox/addon/expire-history-by-days/ Expire history by days]
    thank you

  • Workflow Tasks NOT expiring!

    Hi guys,
    I've bumped lately with an issue building a workflow on SP2010, as you mostly already have figured out from the title, workflow tasks are NOT expiring.
    I've tried to take this on my own, but no more as I have to move on. Here's the details;
    -a custom workflow (attached to a custom list) that has start custom task as its first action.
    -due date for custom task is set in "select task process participants", Due Date for Task Process. and is set to run parallel (I have one participant for the task).
    -the custom task have only the "behavior of a single task" configured, all task workflow steps are there.
    When a Task is Pending fires well, and it ends with Pause for 2 minutes > then send email. then task due date reaches but
    When a Task Expires never kicks! tasks simply stays at status "Not Started"
    when I check the workflow history, it shows the last log "pausing completed", but I suspect the main issue is with the task processor, task isn't expiring and im not sure where to look.
    timer job service is working, I've checked timer jobs (workflow auto cleanup, workflow failover and bulk workflow task processing) and they're all running in timely fashion now.
    any thoughts?
    thanks
    If a reply helps you Vote As Helpful, if a reply solves your problem don't forget to Mark As Answer. Aabed Yassine.

    hi Victoria,
    running the above code in a PS1 file throws:
    The term 'http://portal.xx' is not recognized as the name of a cmdlet,
    function, script file, or operable program. Check the spelling of the name, or
    if a path was included, verify that the path is correct and try again.
    At C:\Users\spadmin\Desktop\Get-TimeZone.ps1:2 char:70
    + $site=new-object Microsoft.SharePoint.SPSite(portal.xx<<<< );
        + CategoryInfo          : ObjectNotFound: (portal.xx:String
       ) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    Get-SPServiceContext : Cannot bind argument to parameter 'Site' because it is n
    ull.
    At C:\Users\admin\Desktop\Get-TimeZone.ps1:3 char:39
    + $serviceContext = Get-SPServiceContext <<<<  $site;
        + CategoryInfo          : InvalidData: (:) [Get-SPServiceContext], Paramet
       erBindingValidationException
        + FullyQualifiedErrorId : ParameterArgumentValidationErrorNullNotAllowed,M
       icrosoft.SharePoint.PowerShell.SPCmdletGetServiceContext
    You cannot call a method on a null-valued expression.
    At C:\Users\admin\Desktop\Get-TimeZone.ps1:4 char:14
    + $site.Dispose <<<< ();
        + CategoryInfo          : InvalidOperation: (Dispose:String) [], RuntimeEx
       ception
        + FullyQualifiedErrorId : InvokeMethodOnNull
    New-Object : Exception calling ".ctor" with "0" argument(s): "Value cannot be n
    ull.
    Parameter name: serviceContext"
    At C:\Users\admin\Desktop\Get-TimeZone.ps1:5 char:18
    + $upm = new-object <<<<  Microsoft.Office.Server.UserProfiles.UserProfileManag
    er($serviceContext);
        + CategoryInfo          : InvalidOperation: (:) [New-Object], MethodInvoca
       tionException
        + FullyQualifiedErrorId : ConstructorInvokedThrowException,Microsoft.Power
       Shell.Commands.NewObjectCommand
    i'm not sure what are the variables in this code, I've change the site collection URL and domain\user. anything else I should edit?
    If a reply helps you Vote As Helpful, if a reply solves your problem Mark As Answer. Its made to make it helpful for others seeking help.

  • How may I automatically stop and start Mail services at a set time please

    Hi folks. I was wondering if anyone could tell me how to automatically stop and start Mail services (or any other services) at a set time please in Leopard Server? Is there a script someone has created which might help?
    Cheers, David ( a realy newbie when it comes to administering OS X server)

    launchd works through a series of XML documents that define tasks to run, either at launch, on a time schedule, in response to network events, etc.
    So you'll need to create two .plists - one to start the mail server and one to stop it. They should be saved in /Library/LaunchDaemons. I'd suggest something like:
    /Library/LaunchDaemons/local.postfix.stop.plist:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
    .com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
      <key>Label</key>
      <string>local.postfix.stop</string>
      <key>ProgramArguments</key>
      <array>
        <string>/usr/sbin/serveradmin</string>
        <string>stop</string>
        <string>mail</string>
      </array>
      <key>StartCalendarInterval</key>
      <dict>
        <key>Hour</key>
        <integer>1</integer>
        <key>Minute</key>
        <integer>00</integer>
      </dict>
    </dict>
    </plist>
    and /Library/LaunchDaemons/local.postfix.start.plist:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
    .com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
      <key>Label</key>
      <string>local.postfix.start</string>
      <key>ProgramArguments</key>
      <array>
        <string>/usr/sbin/serveradmin</string>
        <string>start</string>
        <string>mail</string>
      </array>
      <key>StartCalendarInterval</key>
      <dict>
        <key>Hour</key>
        <integer>4</integer>
        <key>Minute</key>
        <integer>00</integer>
      </dict>
    </dict>
    </plist>
    You'll need to either use launchctl load /Library/LaunchDaemons/local.postfix.stop (or start) to load the tasks, or reboot your server.
    I'm curious, though, as to why you want to do this. Mail is typically one of the services that people want to run 24/7 so they don't miss out on any emails (even though SMTP can tolerate this). Why do you want to shut yours down?

  • Aging BPEL PM to force workflow tasks to expire

    I need to be able to age the BPEL PM server in order to force tasks to expire in minutes/hours rather than the waiting 90 calendar day period. 1) Does BPEL PM use the system time as a reference? ie Could I age the server with a java time machine environment? 2)Can anyone point me to an "approved" method of aging workflows for system and end to end test purposes?
    Thanks,
    Kelaman

    You could cancel a outstanding workflow. This means you could write your own code in BPEL, that cancels the workflow depending on your rules. Cancelling can be down by accesing the HumanTask Enging with a different operation. See the WSDL of your HUmanTask which operation you could use.
    Cancellation is done based on the TaskID that is returned after human task is created.
    Marc

  • HT201336 Hi I have a certificate expired and was wondering how can I update it ?

    I have an apple Iphone certificate expired and I was wondering how do you renew it?

    No answers, just some questions...  (I'm not sure what you're asking.)
    Where did the certificate originate?  An Apple iPhone certificate?  For what?  For iOS development?  For VPN?  For accessing remote web services, on a server?    This is the OS X Server 10.6 forum; are you working with certificates with that operating system, or with certificates on an iPhone?
    If your OS X Server system has an expired certificate, you'll need to either purchase a new certificate, or generate a new self-signed certificate and load that via the Certificate Assistant and Server Admin tools.

  • Good afternoon! I purchased a few months the basics of adobe photoshop package with the CC and Lightroom, but has expired, and was made the annual package. What can I do to solve this problem. I have two weddings being edited and now I can not finish the

    Good afternoon! I purchased a few months the basics of adobe photoshop package with the CC and Lightroom, but has expired, and was made the annual package. What can I do to solve this problem. I have two weddings being edited and now I can not finish the work. I thank you.

    Renew the subscription?

  • Automatic Invoice and PGI after salesorder(userexit_document_save)

    Hi All,
    Here my requirement....
    I need to do automatic Invoice and PGI for cash sales in Sales order.
    For this, I coded inside the userexit_save_document, in this userexit i'm getting the sales order number to create Invoice and delivery number to create PGI but the issue before this userexit the sales order and delivery are created but not yet committed. So, when I am trying to create pgi and invoice in this exit.... it says the document doesn't exit.
    Could anyone suggest me an methos to do that.
    fyi: in my current approach for PGI im executing the standard report 'WS_MONITOR_OUTB_DEL_GDSI' using submit by passing the delivery number .............output says 'document don't exist'
    for Invoice : I recorded the transaction 'VF01' and updating using bdc in funtion module, this function module is called from userexit_document_save using 'call function zffucn IN UPDATE TASK'..........this creates runtime error and shortdumb. when I looked in sm13 error says '00 671: ABAP/4 processor: POSTING_ILLEGAL_STATEMENT' , short text says 'Statement "CALL TRANSACTION" is not allowed in this form.'.
    is there any better way to do this???
    any suggestion will be appreciated
    Regards.

    Hi,
    I tried using perform ...ON COMMIT....
    Now i can clearly see that the sales order and delivery is created (message is displayed in the status bar)..
    when i debug the code.....this is executed at last i.e  but still it shows that 'Document xxx does not exist'. SO, I believe it is not yet committed to database.
    If I exit from that screen and enter into vf01 or standard report then it works...so its getting committed only getting out of that transaction ....i think there is some small change is missing...could anyone give suggestion.
    regards.
    Edited by: Shankar Raju Devadoss on Mar 17, 2011 11:07 PM

  • Expiration and Clean up thread - MDM connector - Visual administrator

    Hi Experts!
    I  need some suggestion from the Visual administrator - MDM connector.
    We have the default setting for maximum connections, clean up thread time and the expiration set.
    As of now, clean up thread value is 300 seconds. and Expiration value is set too. But we could see, as the days goes, the number of connections in the 'UsedManagedSessionsCount' is increasing. I feel the expiration is not working.
    Could you kindly suggest, how to ensure the expiration and clean up thread is working?
    Thanks,
    SK

    Hello,
    1) Connections are used quite a long time (this depends on how
    applications using the datasource is implemented, or how long it keeps
    the connections referenced). In this case the solution will be to:
      1.1) Increase the pool size: Maximum Connections Number. The optimal
    value for this as a rule of thumb is: the max connections with which the
    backend (Database) performs best divided to number of servers in the
    cluster.
      1.2) Increase the Maximum time to wait for connection - so the
    resource system of J2EE Engine will wait for freed connection longer
    before throwing the exception. However, from end user viepoint, this
    will lower the performance. But it's better than failure.
      1.3) Enable expiration - set Connection Lifetime to 300 (5 minutes) -
    this means that after it is returned to the pool if not referred again
    within 5 minutes it is destroyed. Also set the automatic cleanup thread
    interval to 180 (3 minutes) - each 3 minutes a thread will be run to
    detect idle connections.
    regards,
    John Feely

  • How to do automate provisioning and deprovisioning

    Hi,
    I am a student and doing the final year project in sunidm. can anyone tell me how to automate provisioning and deprovisioning in sunidm.
    thanks

    You need to identity all your possible actions that could occur for this object. Create, Enable, Disable, Revoke, What fields do you plan to update? Now write a connection code using an IT Resource for input paramters, and then code your actions. Create the process tasks for each, and attach your adapters, and map your variables.
    -Kevin

Maybe you are looking for