Task Categories Issue

Hello All,
I am new to BlackBerry. I have a BB Bold (9000). I synced the Bold with my Outlook tasks using the Desktop Manager (first with version 4.6, then 4.7). I had assigned categories to my Tasks in Outlook (for example, Work, Home, Personal, etc.). When I did the sync with my device, the categories carried over. However, when I tell the Bold to filter by category, it lets me pick the category by which I want to filter. However, it doesn't actually filter the tasks. The screen will have the category name at the top, but it lists ALL the tasks, not just the ones in the category.
Any suggestions?
Thanks,
Adam

Here are the steps:
1. Open Tasks
2. Press Menu Key
3. Select Filter from menu. This gives me a list of categories by which I can filter
4. Select the desired category by clicking on the relevant check box
5. This puts me back at the task list screen. The filter category name is displayed under the Find field and above the Add Task field. However, the task list contains ALL the tasks, not just the filter category tasks. When I open one of these non-filter tasks, the category name is at it should be (meaning, it does NOT take on the name of the filter category), confirming the fact that it should NOT be in the current filtered list.
Thanks,
Adam

Similar Messages

MailforExchange and task categories

Hi,
I'm pretty disappointed by the fact that MailforExchange does not seem to support Exchange categories for tasks. Checking the web showed that I'm not the only person who experiences this issue and feels about it this way.
At this moment my task list in Outlook is nearly 200 items long. This is manageable via multiple categories, similar to the GTD setup. My tasks are synced to my E71 but without categories. It's just not possible to keep track of my tasks in any usefull way as scrolling down 200 tasks every time is really not an option. The lack of this functionality really limits the usefulness of my E71.
So two questions:
1. Am I missing some vital thing which solves this issue?
2. If not, is there any way to get any attention of the development team of MfE to possibly get this on the nest feauture list?
TIA!

I have similar problems with the tasks handling, any ideas on how to work them around?
Task Categories: I have the same problem, and although I only have near 50 tasks, having them without categories really makes them complicated to work with. Any way to work it around?
Alarm and "Go To": As well, is there any way to get directly to the task after having it remind you with the alarm? Some of my tasks are to remember a list of steps or quick questions which I need to update when reminded.
Quick button to task list: is there any shortcut in order to get to the tasks list, such as it is to get to the calendar? I have been a palm user for years, and have learned to appreciate this feature, interestingly Nokia doesn't have it.
Any ideas on how to fulfill this small issues?
thanks,
daniel nanton

Help - isync doesn`t sync ical-calender task´s to palm task-categories

I am using isync 2.4 and the latest palm-software with a Palm TX.
When I sync ical to the palm, the task will not sync to tasks with a specific category (e.g. @call) at the palm?
Does ical not support categories at palm?
Any solution or hint for that problem would be highly appreciated!

This issue is one of the many long-standing shortcomings of the iSync conduit, and isn't likely to ever be addressed.
You should instead take a look at the Missing Sync for Palm OS which addresses almost all such issues. With an advanced [post Palm OS 5.4] device, it is a virtual necessity.

KM Scheduler Task Cache issue

We have created couple of custom schedulers in Enterprise Portal. These schedulers are worked fine in our QA and DEV environment. But when we move the same transport to Production the scheduleru2019s tasks are not showing up in KM scheduler list. But after restarting J2EE couple of times it's showing up in KM scheduler task. This is the behavior we are seeing whenever we move the scheduler to production.
Here are the some technical details about the scheduler,
We have created one Portal Development component and 10 Scheduler Tasks under this component. All the tasks are not created in a single release. Initially when we develop we used to have 2 scheduler tasks under this component, when we move this transport to production we didn't faced any issue. Even after adding 4 to 5 scheduler task we didn't had any issues. After adding more than 6 to 7 whenever we add one we are getting the same issue.
Question: 1 - Is there any limit to for adding Scheduler task in one Portal Component?
This time we have restarted our server more than 5 times but scheduler not showed up. We ask our manger to logon to the portal server who never navigated to KM screen, we ask her to navigate and she did. For her schedulers are showed up. After she navigated to the KM screen everybody is able to see the scheduler. This is not the first time it happens like this, the same situation happen for the previous release also. In previous release we ask our Technical Architect to login to see KM schedulers. After his login everybody is able to see the schedulers.
After doing all these is what I obverse is, it seems KM scheduler has some server level cache for the user and it's giving old screen whenever we are trying to login and see. After the transport, the cache is not getting updated with the new version.
We guess it might be something we need to do with cache.
Is there any idea why the system is behaving like this.

Hi,
I am facing similar issue. How did you resolve it?
Regards,
Apurva

Inspection with Task List Issue

Hi Gurus,
I have a situation where I am creating a "shell" Material. We are taking samples of Blood and just throwing them away. We don't need to have Inventory on them or costing. I just want to use the QM module to keep the inspection results/data.
I had my Materials team set up a Material with only the Basic Data 1&2 views and the QM view. I want to use Physical Samples to keep track of how many samples we inspect.
My issue is... I tried to Inspect with a Task List and it is "Greyed" out on the Material Master. It will not let me select it. I am using the inspection type 15 (Physical Sample).
Can someone PLEASE help me get this Task List check box not grey?
Thanks so much

This field should be defaulted in from configuration. Change the defaut vales for inspection type 15 in configuration.
I think someone, at some point, changed this config in your system as I believe this is delivered by SAP as defaulted for inspection type 15.
You might try using mass transation QA08 to set this for any materials you have already set up after changing the config.
FF

How to fix Task form issue which is not opening in browser?

Hi All,
When trying to open task form link which is in email, facing:
How to fix this issue? thanks in advance!

Paul,
My scenario is: Having a team site and a sub-site. In sub-site, created on list form associated with designer workflow which will assign approval task to a person who are not a member of this sub-site but member of team-site.
Before assign task, assign permission to that person using impersonation step like:
Add Approve to item in Current Item
Add Approve to item in Association: Task List
When click the task link which receive in email, that person facing above issue. After I add that person in sub-site site viewer group, then it working perfectly.
My question is, is it possible to give approve permission to task list by designer workflow to a person who are not a member of a sub-site?

Task Reassignment Issue in OIM9.

Guys,
When I am reassign a task to some user , its not triggering any email in my QA Env , but its working fine in Dev Env.
Also , I need to check user @time of reassignment , i have some criterion for reassignment. how do i deifne that criterion for user selection @time of reassignment.
Thanks.

Guys,
Need you help on above issue.
Thanks

Human Task expiration issue

Hi,
I have the following scenario.
Its a simple BPEL process with string input and string output with a call to Human Task.
the Human Task has the expiration duration of 5 mins.
I invoke the process from bpel console and as expected it waits for the human task to respond or expire. during this waiting time I happen to restart the soa server. The server was restarted before the expiration time but still the task did not expire.
Task still stays with the user assigned and the process is still waiting for the response from the task(which is already passed expire time).
I am using SOA Suite *10.1.3.4* with a patch set *7714967* applied on top of it.
I have tried to set the startup recovery also but no help.
If some body can give me the solution. that would be great.

I have tried with MLR Patch # 8372150, but no luck. I have found a similar thread on this forum who has the same issue.
quartz based workflow times are not initializing
If this might be the problem, how do we fix the following error message.
*<::> Unable to get the workflow timers during startup, this can happen if orabpel server is not started properly*

10.1.2. to 10.1.3 Human workflow task migration issue

Hi all,
I am currently looking at the possibility to migrate our 10.1.2 bpel processes, containing human workflow task, to 10.1.3.1.0 Everything seems to migrate smoothly except the human workflow functionality.
The initateTask invoke action returns the following error in the 10.1.3.1 console when I ran an 10.1.2. bpel process containing a human workflow task:
[2006/12/04 03:01:00]
"{http://schemas.oracle.com/bpel/extension}remoteFault" has been thrown.
- <remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
- <part name="code">
<code>
WSDLReadingError
</code>
</part>
- <part name="summary">
<summary>
Failed to read wsdl.
Failed to read wsdl at "http://xesoa1.iteye.local:8894/orabpel/default/TaskActionHandler/TaskManagerService.wsdl", because "Failed to read WSDL from http://xesoa1.iteye.local:8894/orabpel/default/TaskActionHandler/TaskManagerService.wsdl:WSDL not found".
Make sure wsdl is valid. You may need to start the OraBPEL server, or make sure the related bpel process is deployed correctly.
</summary>
</part>
</remoteFault>
I know that in 10.1.3 the human workflow mechanism is heavily changed and now is invoked by using other services (TaskService) than the services used (TaskActionHandler process)in 10.1.2. In 10.1.2 the TaskActionHandler was a separate build-in bpel process used for interaction between a bpel process and the human workflow. This process is not present in the 10.1.3.1 installation, so that is causing my error. Moreover, in 10.1.3 the interaction between a bpel process is and the human workflow is not done by invoking a separate bpel process (TaskActionHandler) but by invoking a java wsif service TaskService..(Correct me when I'm wrong or not complete)
My question now is how can I migrate my 10.1.2 human workflow task to 10.1.3.1 without manually rewrite the task scopes to 10.1.3...According to the fragment below copied from the JDeveloper 10.1.3.1 help files it should be possible. Maybe, there's is a way to deploy the needed processes manually?
Oracle BPEL Process Manager Workflow Services 10.1.2 and 10.1.3.1.0 Compatibility
For release 10.1.3.1.0, the workflow wizard has been replaced by a Human Task editor. This editor enables you to specify task settings such as task outcome, payload structure, task participants, assignment and routing policy, expiration and escalation policy, notification settings, and so on. You cannot use the Human Task editor to edit 10.1.2-based workflows. To use any new 10.1.3.1.0 functionality, the task scope of the workflow must be manually migrated to use the new workflow metadata. Note also that this is the last release in which you can deploy workflows designed with 10.1.2.
Kind regards,
Tom Hofte

Hi Clemens,
Thanks for your quick response. The Taskmanager and the Taskactionhandler are indeed not deployed so I will do that automatically.
Still one question/remark left:
You noticed that you still have to complete the tasks using the old worklist app. . So if i'm correct, you have to use the deprecated 10.1.2 worklist api or build-in worklist app. The 10.1.2 worklist app is not deployed in my 10.1.3 installation. However, 10.1.3 only contains the new worklist app. Is there also a way to deploy it manually?
Writing this down it al looks a bit clumsy to me. Is it not a better option to invest some time in migrating all tasks scopes manually to 10.1.3, because as far as I can see the human tasks are causing the main issues concerning migration? After this you have a 10.1.3 compliant system. I wonder what your opinion is on this issue.
Kind regards,
Tom

RSS Feed and Podcast Categories Issue

Hey everyone,
I'm having a lot of problems publishing my podcasts with iweb. I create them on Garageband and then send to iWeb where they're part of a larger site. Anyway, they were working at one stage, but now seem not to be at all.
I ran the RSS feed through fee validator and it's telling me the categories chosen are not longer valid itunes categories. I want them in video games, but there's no choice for this when I'm going through iWeb.
The issue is that I don't know how to get to the RSS feed to edit it. I only see the iWeb format, but I want the actual source code etc to go in and change that around if possible. Does anyone know how to do this?
Thanks in advance
Tracy

Hi,
Thanks for the help, that is much appreciated. Sadly I'm still having the same issue. The two old dead feeds are still on iTunes after weeks of me asking for them to be removed and also after me putting the block tag into the rss feed. My new one still hasn't shown up even though it was updated on Saturday... it's really a nightmare.
Can someone please please help.
Thanks
xx

Deferred Task Date - Issue

Hello,
I am attaching to deferred to a user object, for the date argument I am adding 2 hours to the current time. In the workflow trace I see the date argument is returning correctly i.e. adding 2 hours to the current time, but when I see the user object (from debug pages) it is adding additional 5 hours (including the 2hours) for the date argument.
It looks like by default it is adding additional 5 hours and not sure how to control this.
Did anybody come across a similar issue? I think it is not a code issue, some configuration settings I need to change and don't know where to change this.
Please share any ideas.
Thanks in advance.

Yes, the deferred tasks show a time in comparison with the GMT. So, I think your code is correct, it just shows the different time in the user object, but actually it is the addition of 2 hours to it (considering GMT).
e.g. If you are in India, it shows 6 hours latter time in the user object than the current.
Your local time - 2011-04-08T00:00:00.000Z
Time in debug pages - 2011-04-08T06:00:00.000Z
When you add 2 hours to this, it shows 2011-04-08T08:00:00.000Z in Debug, BUT in fact it is 2011-04-08T02:00:00.000Z
Thanks

Human task callbacks issue

I ran into some problem using callbacks in human task. For example: onTaskupdated, I invoke a WS call, the human task just ignore that as if there is no callback; however, when I shift the invoke to another branch such as onsubtaskupdate, the callback is ignored on subtaskupdate but ontaskupdate works normally. -.-!

I have tried with MLR Patch # 8372150, but no luck. I have found a similar thread on this forum who has the same issue.
quartz based workflow times are not initializing
If this might be the problem, how do we fix the following error message.
*<::> Unable to get the workflow timers during startup, this can happen if orabpel server is not started properly*

EHP4 - Task Statuses issue

Dear Experts,
We have a situation after the EHP4 upgrade,
we were able to configure Restatement & status reporting.
But when we imported the Transport requests in another environments,
We have issue with the task statuses.
Like all the statues of the tasks in consolidation monitor changed to Initial stage.
please help us understanding this. Is it expected or is it an issue.
Do we have any remedy. can we get back the earlier statuses.
We have a Go live on this upgrade. plz help us in this situation.
Thanks
Kamal
Edited by: kamal kishore on Nov 12, 2009 2:39 PM

Hi,
After the upgrade we checked the status monitor & we found all the historical status of tasks were made to initialised status.
As per SAP while regenerating the data basis system created new table for status rather than the old table (not sure why)
Hence all the old period task status were made to initialised status.
SAP made a fix in the system & we could solve the issue.
Thanks
Kamal

Gmail categories issue in Mail.app

Hi,
I notice a problem with Gmail in Mavericks 10.9.1. Mail does not seem to be compatible with the new Inbox categories (Promotions, updates, social, ...). If I remove such a mail from my inbox with iOS 7, the mail stays in my inbox in Mavericks.
When checking on the Gmail website, it seems the affected mail has one of the new categories assigned to it. So, Mavericks assumes it is still in the inbox.
I have tried disabling the feature in Gmail, but mails still keeping on being assigned these labels.
Come to think of it: maybe it's rather an iOS issue, as the mail is not properly archived.
Anybody an idea on workarounds or how to disable this Gmail feature?

*I figured it out!*
Simple fix, here is what you do - open Mail v4.2 > Preferences
Select your Gmail account with this weird problem (I say select, cause in my situation I have multiple Gmail account setup but was having trouble with 1).
Then goto > Advanced tab
and then just type "/" (forward slash) - and then wait for a minute, it should fix it and allow to receive all the ghosts messages again - which apparently were visible under my online (web based) gmail.com's account also on my iPhone. You might see double messages, don't freak out like I did - Quit Mail v4.2 and restart that should go away as well, like in my case. Strange? Definitely
Anyways, hope this helps!

Task sequence issue[OS Deployment]

Hi All,
we have created a test environment for OS deployment. we are using SCCM 2012 SP1. Dp is installed on same server. SCCM site server OS is windows 2008 R2. we have captured the image using MDT tool. We have problem that whenever we do a deployment we
get below issues.
1. OS installed on next available logical drive(in my case it's D:\)
2. when we create a task sequeste using task sequence veriable(http://sccmfaq.wordpress.com/2013/02/14/sccm-2012-sp1-install-windows-7-to-drive-letter-c/
) it gives us error "There is not enough space on the disk. (Error: 80070070; Source: Windows) ApplyOperatingSystem"
3. When we create a task sequence and provide dive name for "Apply operating system", it works fine on a system which has two partition(c & D) but which has one drive( only C) gives error("There is not enough space on the disk. (Error:
80070070; Source: Windows) ApplyOperatingSystem" ) as mentioned in 2.
Any help will be highly appreciated.
Rakesh Kumar

Thanks for the suggestion but that did not help me either.
To brief more about the scenario,
I have captured the image using MDT and deploying the image via SCCM 2012 Sp1.
I also found that the same image when deployed via MDT wipes the second parition (D:\ drive). IS this is the root cause of my problem. Is there any way i can customise and handle it within TS.
Regards, Shweta Karalkar

Task Categories Issue

Similar Messages

Maybe you are looking for