Task in SCMA

Hello
How to create a new task in SCMA transaction code, ie Shedule Manager.
Regards.
Poornima.

Hi Sanjai,
Thanks for your quick response. I am ble to create the transport request and task without any problem.
My question was before CHaRM given options to register transport requests which created outside CHaRM I mean our regular way not through CHaRM. When I go to TASK Level (Schedule Manager), able to execute the options Register Transport Requests but when I check nothing happened. Even I switched the CTS Project, so that can include the project name in the transport request and then I ran that options and again nothing.
So if anybody has done this, please help me on this.
Thanks
Ava

Similar Messages

Schedule Manager - Use of Selection Variable

Hi all,
My Question is "What is the use of Selection Variable settings in Schedule Manager screen?"
I am not asking about defining selection variable in the variants to pick up values from TVARV table. My question is how I can make use of the Selection Variable(Extras->Settings->Selection Variable) in the Schedule Manager screen.
The variable value column is ready for input in the Schedule Manager screen, is it possible to set the variant to pick up this value for the tasks in SCMA?
Any help would be greatly appreciated.
Thanks,
Prabha

Hi Prabha,
After you have finished maintaining your variant, you would have to click on the "Attributes" button just below the title and maintain the description for your variant. Save this entry and press the back green arrow. Your save button would now be activated and you can save your settings now.
I hope this helps.
Do not forget to award the point please.
Regards,
Jacob

SCMA(Schedule Manager) - Monitoring Flow task

Hi,
Anyone has experience with SCMA. If so, can you please guide me in resolving the following issues.
1)In monitor, Flow task status is green but the underlying two steps have no status. I see Schedule Job and Start Job for each step with no status.
Why SCMA does not update the status of start job(or Schedule job)?
2)Since the flow definition is assigned to 'Customer' appplication, no work list is possible.
if so, shouldnt the monitor display the details of corresponding job(from SM37) in the flow task details. I havenot seen any demo yet with worklist so I do not what does it provide in monitor.
3)Is there an implementation guide for customer applications providing worklist?
I sincerely appreciate reply for any of the above questions.
thanks,
venu

bumping up.

SCMA Schedule Manager Email

Hi,
This is more of an FI-CA question but there doesn't seem to be a specific forum for FI-CA so I'll apologise in advance.
I am having a problem with SCMA flow definitions. On each task of the flow there is an option to send email to someone if the job has errored. I have spent some time on this and have not been able to get it to work. Has anyone got this working and, if so, how?
Regards,
Dion

Work fine for me. See SAP note 332149 for basic settings for the workflow.

Schedule Manager SCMA

Dear All,
Is there any way to schedule the sub task after completion of a task automatically in schedule manager SCMA??as we execute the step one by one, so once the job is comepleted it should automatically trigger the step assign to that task.
How flow definition works?

Hi All
So far I know tasks doesn´t have this feature, but there are workflows where you can set it.
Try to create a workflow. It work for example for some transaction that have some steps to be executed. Eg. CKMLCP.
Regards.

Customizing authorization in task list

I have some issue to configure the task list (tx SCMA) because the system landscape is maintained by two different administrator teams ( one for dev and qualification system and another for the production )
Iu2019d like to have two different view on the same task list : one have access to all system and the other one with the production system only
Is it possible ?

It looks like the fields Project Manager and Approver Manager are Person type fields. These fields are not listed in List validation column settings. An alternative for you is to override SharePoint JavaScript function "PreSaveAction". You can
use JavaScript code to comapre the values in these two fields and perform validation.
Blog | SharePoint Learnings CodePlex Tools |
Export Version History To Excel |
Autocomplete Lookup Field

SCMA create transport request: Suggested request owner is wrong

Hi,
When we try to create a transport request via SCMA the suggested request owner is not the user executing the create request itself but the user who created the project some time ago. Eventhough this user can be changed this leads to wrongly assigned transport requests.
Since project creation number of users have been added to the project in solar_project_admin but they are not taken into account.
We already did try creating a new task list for the project but that did not work.
Any ideas how to solve this?
thanks
Tom

Hi Tom,
Normally it is done via action Create Transport Request in the SDHF/SDMI document.
There are certain advantages of it.....for e.g..u can create a task if u want to have mulitple changes and can assign multiple developers
Try this it will solve ur problem
Regards
Prakhar

Multiple instances of firefox in task manager but FF doesn't open

- Windows XP SP3 (up to date with all critical updates)
- FireFox 25.0.1 (Note: Originally I had version 31 but a few days ago that stopped working)
- Norton Security Suite (the comcast version) up to date
- I have IE6 and Chrome 37 as backup browsers (Note: when FF stopped working, IE8 had also stopped working - page would open, only one system process, but page would never load)
Ran the following scans:
- SUPERAntiSpyware Free Edition
- Malwarebytes Anti-Malware
- Ad-Aware Antivirus
- Spybot-S&D Start Center
Found a few non-critical yet potential infections (nothing too crazy)
Symptom persists as follows:
- fresh boot of computer
- open task manager (no instances of FF)
- open firefox - process appears in task manager and immediately goes to 50%
(nothing opens and nothing listed in Applications)
- open a second instance of firefox - 2nd process appears in task manager
(still nothing opens and neither instance appears in Applications
(the two instances continue to run at a cumulative 50% CPU usage - one might be 15% and the other running at 35% - or both running at 25% each)
- open a third instance of firefox
(still nothing opens, and all three instances show in task manager processes and cumulatively run at 50% - example:15 +15 + 20 or 10 + 15 + 25)
Troubleshooting:
restored a drive image from May 2014
- Note: Dec 2013 I had done a complete FRESH new install of Windows XP in prep for EOL and installed all updates, including SP3, so the image I chose from May was only 5 months old, but I chose that one because of some of the other programs I had installed that month and didn't want to go through that again
- Note #2: I have drive image run a monthly PQI backup of my C: drive and my R: drive) I have two hard drives 300G each whereas C: drive is OS only and R: drive is all my downloads, my documents, my photos, etc)
- after the image restored, I tried to open FF and IE8, neither app was problematic. FF auto updated from what version, I don't know, but it was on 31 when I realized the problem was BACK. Also ran some WIN critical updates, and IE8 stopped working too!
uninstalled IE8 (rolled back to IE6 and now IE works - but obviously I can not live with IE6 - I need to update that!) uninstalled FF31 (and deleted all temp and profile account folders) and installed a brand new copy of FF25 - whereas I immediately force stopped autoupdater and deleted the update files so I could remain on FF25.
Now FF25 will open only on the second instance of the process (the first will always go to 50% CPU, the second will open and run between 0 and 10 CPU, and only one application in Applications)
- I have learned that I can kill the 50% process using task manager or process explorer and total CPU usage will drop down to 0% - 10%
I can open many many tabs without any problems, and I can right click a link to open a new window and all is good, BUT if I use the desktop ICON, the quick launch ICON or the START > Programs > Icon, then the NEXT process will go to 50% and no second window will open
I have seen dozens of forums that have reported similar memory issues, but none have been resolved.
Can you help me? I don't want to upgrade IE6 to IE8 just yet, but I will not use it for anything but testing until I can upgrade. Note: besides being painfully slow, I have been switching to Chrome, but I have never enjoyed Chrome.... I am using FF right now to ask for help.
Any suggestions?

I have the "techie" answer for all of you. According to the tier 2 support at Norton Help Desk, the latest live update from Norton "utilizes Visual Studio 2012 which enables SSE2 instructions" and my processor can not handle that.
He said they are "working on a solution" and offered to reply back on Wednesday / Thursday this week if a solution could be found...

Closing an open task programatically

HI,
I have created a custom component in order to establish connection to BPM .
The flow is such that , the connection gets established and i need to fetch the tasks based on the workflowInstance and user ID specified.
I am able to fetch the tasks from which i extract the task state.
Need to close the state of an open task i.e need to update the state of the task to close. Not able to do it.
How do i achieve this?
This is the piece of code that is supposed to perform the functionality.
Please have a look and provide your inputs in order to achieve the needed.
Function Call:
this.updateTaskOutCome(task1, "CLOSE");
Function Defnition:
public int updateTaskOutCome(final task,
                                 final String outcome) {
        // variable to show success or failure
        int success = 0;
        // creating reference for TaskQueryService
        TaskQueryService taskQueryService = null;
        // creating reference for WorkflowContextType for admin context
        WorkflowContextType adminContext = null;
        // creating reference for WorkflowContextType for user context
        WorkflowContextType userContext = null;
        TaskService taskService = null;
        oracle.bpel.services.workflow.task.model.Task outcomeUpdatedTask =
            null;
        CredentialType adminCredentialtype = this.createAdminCredentialType();
        CredentialOnBehalfOfRequestType onBehalfRequestType =
            queryFactory.createCredentialOnBehalfOfRequestType();
        // calling getService method og BPMConnection
        //get taskQueryService Object from BPMConnection
        //taskService = getService("taskAction");
        //creating WorkflowContext for admin
        //setting admin context to onBehalfRequestType
        try {
            taskQueryService = (TaskQueryService)getService("taskQuery");
            adminContext = taskQueryService.authenticate(adminCredentialtype);
            onBehalfRequestType.setOnBehalfOfUser("username");// admin username given
            onBehalfRequestType.setWorkflowContext(adminContext);
            //creating WorkflowContext for user
           userContext= taskQueryService.authenticateOnBehalfOf(onBehalfRequestType);
            // getting BPM Client for performing user actions
            taskService = (TaskService)getService("taskAction");
            // creating UpdateTaskOutcomeType object and setting its property
            UpdateTaskOutcomeType updateTaskOutcomeType =
                taskActionFactory.createUpdateTaskOutcomeType();
//            //setting outcome
            updateTaskOutcomeType.setOutcome(outcome);
            //setting task
            updateTaskOutcomeType.setTask(task);
            // setting userContext
           updateTaskOutcomeType.setWorkflowContext(userContext);
            // calling webservice operation for performing user action
            //setting success variable
            outcomeUpdatedTask =
                    taskService.updateTaskOutcome(updateTaskOutcomeType);
        } catch (StaleObjectFaultMessage e) {
            Report.trace("mysectionstring",
                         "inside staleobject fault message catch block", null);
//        } catch (WorkflowErrorMessage e) {
//            TaskQueryServiceFaultType faultInfo = e.getFaultInfo();
        } catch (Exception e) {
            e.printStackTrace();
        if (outcomeUpdatedTask != null) {
            success = 1;
        return success;
Thanks in advance,
Bharath

Any one facing similiar issue?
Could someone please provide some information.
Thanks,
Bharath

Report Generation task error

I'm using report generation VI's to generate my report (standard report). If I make an application at my development PC (LV 6.0.2 Win-NT 4.0 SP6; application builder 6) and start the EXE-file, there are no problems. I transfer the software (installer) to the target PC (Win-NT 4.0 SP6; run time engine 6.0.2) and start the print subroutine in my program. When I leave the application I have still the LV-Task in the Win-NT task list. I have to start the task manager to stop it. It happens only if I use the print subroutine ( with the report generation VI's) in my program. I made a test with the same subroutine but switched to html output, the task list is emty after leaving the program. Do you have any idea?

try re-compiling the report generation vi's (ctrl+alt+run button) then re-create your exe.

Problem description: My macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click- EtreCheck

My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
 MacBook Pro (13-inch, Early 2011) (Technical Specifications)
 MacBook Pro - model: MacBookPro8,1
 1 2.3 GHz Intel Core i5 CPU: 2-core
 16 GB RAM Upgradeable
 BANK 0/DIMM0
 8 GB DDR3 1333 MHz ok
 BANK 1/DIMM0
 8 GB DDR3 1333 MHz ok
 Bluetooth: Old - Handoff/Airdrop2 not supported
 Wireless: en1: 802.11 a/b/g/n
 Battery Health: Normal - Cycle count 250
Video Information: ℹ️
 Intel HD Graphics 3000 - VRAM: 512 MB
 Color LCD 1280 x 800
System Software: ℹ️
 OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
 Hitachi HTS545032B9A302 disk0 : (320,07 GB)
 EFI (disk0s1) <not mounted> : 210 MB
 Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
 Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
 Core Storage: disk0s2 319.21 GB Online
 MATSHITADVD-R UJ-898
USB Information: ℹ️
 Apple Inc. Apple Internal Keyboard / Trackpad
 Apple Inc. BRCM2070 Hub
 Apple Inc. Bluetooth USB Host Controller
 Apple Inc. FaceTime HD Camera (Built-in)
 Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
 Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
 Mac App Store and identified developers
Launch Agents: ℹ️
 [not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
 [loaded] com.oracle.java.Java-Updater.plist [Click for support]
 [running] com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
 [loaded] com.adobe.fpsaud.plist [Click for support]
 [loaded] com.adobe.SwitchBoard.plist [Click for support]
 [loaded] com.microsoft.office.licensing.helper.plist [Click for support]
 [loaded] com.oracle.java.Helper-Tool.plist [Click for support]
 [loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
 [running] com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
 [loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
 [loaded] com.adobe.ARM.[...].plist [Click for support]
 [loaded] com.google.keystone.agent.plist [Click for support]
 [running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
 iTunesHelper UNKNOWN Hidden (missing value)
 AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
 Stickies Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
 JavaAppletPlugin: Version: Java 8 Update 31 Check version
 FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
 Default Browser: Version: 600 - SDK 10.10
 AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
 AdobePDFViewer: Version: 10.1.13 [Click for support]
 Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
 QuickTime Plugin: Version: 7.7.3
 SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
 Google Earth Web Plug-in: Version: 7.1 [Click for support]
 Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
 iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
 npsf_cef: Version: sf 3.3.1.1 [Click for support]
 Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
 DivX HiQ
 DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
 Flash Player [Click for support]
 Java [Click for support]
 MacFUSE [Click for support]
 Perian [Click for support]
 Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
 Skip System Files: NO
 Auto backup: YES
 Volumes being backed up:
 Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
 Destinations:
 Time Machine Backups [Local]
 Total size: 999.86 GB
 Total number of backups: 60
 Oldest backup: 2012-07-15 01:16:54 +0000
 Last backup: 2015-03-29 19:28:06 +0000
 Size of backup disk: Excellent
 Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
 97% rapportd
 3% WindowServer
 1% mds
 0% fseventsd
 0% distnoted
Top Processes by Memory: ℹ️
 155 MB Safari
 120 MB Finder
 86 MB rapportd
 86 MB WindowServer
 69 MB mds_stores
Virtual Memory Information: ℹ️
 12.56 GB Free RAM
 2.53 GB Active RAM
 428 MB Inactive RAM
 1.66 GB Wired RAM
 1.04 GB Page-ins
 0 B Page-outs
Diagnostics Information: ℹ️
 Mar 31, 2015, 06:00:15 PM Self test - passed
 Mar 31, 2015, 01:13:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
 Mar 31, 2015, 01:05:42 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
 Mar 31, 2015, 12:24:33 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
 Mar 30, 2015, 05:45:38 PM /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
 Mar 30, 2015, 01:52:07 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
 Mar 29, 2015, 05:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
 Mar 29, 2015, 01:06:38 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
 Mar 29, 2015, 01:02:47 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
 Note: You will need an active Internet connection. I suggest using Ethernet
 if possible because it is three times faster than wireless.

Mark waiting and cancelled tasks completed

Hi All,
is there sql somewhere that can mark certain tasks that are in waiting and canceled status to Completed?
Thanx.
Fred

I would suggest using the APIs to update the status or use the manuallyComplete API instead.
-Kevin

How can I display a SP 2010 out of the box workflow's task assignees via powershell?

There are days where one of the 250+ workflows at the site has attempted to send email to someone no longer at the company.
I would like to find a way to go through the farm and display all the list URLs that have workflows, and the mail addresses associated to the workflows.
This way I can track down the workflows that need to be updated to remove the missing users.
I have started a bit of script to do this. In my script, I just had a site collection - I figured that if I can get that to work, then surely wrapping another loop for the rest of the farm won't be bad.
However, for some reason, I am not seeing the output that I expected to show the mail addresses.
I am hoping a different set of eyes might see what I am missing. It was my understanding that the AssociationData property was XML that contained information about the assignees for tasks, the carbon copy list, etc.
Maybe I misunderstood something that I read?
$outLoc = "d:\temp\wfdata.txt"
$web = Get-SPWeb -Identity "http://myfarm/sites/it/"
foreach ($list in $web.Lists)
$associationColl=$list.WorkflowAssociations
foreach ($association in $associationColl)
$association.AssociationData | Out-File $outLoc
$web.Dispose()
I want to thank you for the helpful tips that so often appear on this list. They help me when I am reading over old threads to figure out what to do. I am hoping that tips on this thread will likewise be helpful.

Hi,
With
SPWorkflowAssociation.AssociationData property, we can get the assignees’ information. Your script can
be able to retrieve a XML format data which contains the user name we need:
So the next step would be getting the user name by parsing the XML data we got.
The two links below will show how to parse XML with PowerShell:
http://stackoverflow.com/questions/18032147/parsing-xml-using-powershell
http://blogs.technet.com/b/heyscriptingguy/archive/2012/03/26/use-powershell-to-parse-an-xml-file-and-sort-the-data.aspx
With the user name, we can get the
Email property of an user with the scripts as the link below provided:
http://davidlozzi.com/2012/03/07/using-powershell-to-access-sharepoint-sites/
Best regards
Patrick Liang
TechNet Community Support

How to use one dynamic connection managers for multiple parallel data flow tasks

hi there:
I have 6 databases residing on the same server. What I want to do is call a store procedure with identical name on each database dbo schema and transport results to a centralized place. The key is to have those SPs run in parallel instead
of in sequence as each SP may take around 10 mins to finish.
The simplest way is to create 6 OLE DB connection managers and create 6 DFT tasks. However, I do not want to maintain 6 OLE DB connection managers as there is a chance to have more connection managers.
What I did so far is to create a OLD DB connection manager and use expression to set up connectionString properties so that it will get populated by variables at run time. It is fine when running all SPs in a Foreach Loop Container. However, it takes
around 60 mins to finish.
When I try to run it in parallel ( basically created 6 DFTs but use only one Dynamic Connection Manager), the connection string gets confused therefore all DFT tasks failed.
Does anyone here have some experience on this topic?
Thanks
hui
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

Yes, basically, on the connectionString property of ONE OLEDB, you are using an expression to supply value and this expression is pointing to a variable.
In this case , you can update this variable from a table which contains many connection strings. It's good if you want to execute Store procedures in a sequential order. When in parallel mode, this will cause issues as connectionString gets overwritten.
I am thinking about using script task to exec sp.
The whole idea is that I do not want to maintain a large number of Connection Managers.
Hope it helps
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --
So you are not able to run parallel executions using same conn mgmr, even with dynamic connectionstring, is that correct? Yes, script task will be a way to go if you wish to execute it in parallel, you may connect to SS and query the proper conn string with
SELECT/WHERE clause in each script > pass it to a script variable > use that script variable and execute the proc. This will require only two things to change in each script, the WHERE condition to get the conn string and the proc name (you may even
get the proc names the same way you get conn string) and everything else will be same. Let us know how that goes.
Hope no two or more procs doing insert/update/delete on the same tables.

How do I move an app (like tasks) from the app list to my today screen?

I have an 8330 Curve and I love the way the active theme works for me me. I can see my msgs and calendar at a glance. Also on this screen are call log and applications. I would like to replace applications with tasks. Is this possible and how do I do it? If there is another theme out there that would do the same I would be willing to try that also.
Thanks

That is theme controlled and not editable by the user.
Another theme might have the functionality.
Here are a number of good theme developers you might check with.
http://www.blackberryforums.com/media-center/153135-attn-theme-developers-included-faq.html
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Task in SCMA

Similar Messages

Maybe you are looking for