Task is locked

Hi ALL,
When iam trying to transport once again alreay relesed package with new TRN.In my Package i have changed something on function group.when iam trying to relesed the New request it saying Function group is locked.it is automatically assigend to a TASK.
What is diffrence between task and request?
how can i unlock it and transport ?
Madhu.

Madhu,
What is diffrence between task and request?
Task are means for distributing work to different persons under same change request. generally change request's owner (the team lead) releases the main request only after all the tasks have been released by the responsible persons. Generally this is seen in development phase of project.
how can i unlock it and transport ?
I believe, you're trying to release the request without releasing the task, thats why you're getting error. check again. first release the task, then the request.
Regards,
Debasis.

Similar Messages

Windows task bar locks when .vi is running

The Windows task bar locks when the .vi is running.
How do I enable the windows task bar so I can multi-task when my .vi is running? Is this new with LabVIEW7?

Thanks Allen, I thought you may have had the answer as I do have a clock function running all the time, but I have a delay in that loop. I figured out what is going wrong. If I maximize the .vi, then the task bar will not function when the .vi is running. So, I did not maximize the .vi, and chose 'Size the front panel to the width and height of the entire screen' on the Window Size category under vi properties, and the task bar now works when the .vi is running. I feel that I should be able to have the front panel maximized, and still use the task bar. I do have 'Always on top' selected in my Start/Settings/Taskbar options. Thanks!

Work item 000000001881: Work item or task TS20000797 locked for execution

Hello Gurus I need your help, I'm trying to configure a WF for ECM (Engineering Change Management) but I can't do this work at all it give this error and I don't know what to do... any suggestion?
Work item 000000001881: Work item or task TS20000797 locked for execution
Thanks in advance

Hi,
I'm trying to configure a WF for ECM (Engineering Change Management)
While testing you're getting this error right.
Check using the Same Object key are you testing in another session.
Regards,
Surjith

Task bar locked?

Some Internet searches have a lock on the task bar not allowing access to the information ( for example a hotel site I recently tried to get info from). How can I unlock this on my iPad?

If you are referring to the little lock next to the greyed https in hte address bar that is indicating you are on a secured site.

Task: TripStatAppr lock and unlock

All expert:
in the TS20000130, why the work item text is:
PersNr. &_WI_OBJECT_ID.EMPLOYEENUMBER& is locked. Please unlock.
is it the employee really lock? how to unlock it?
The description like this:
Personnel number &_WI_OBJECT_ID.EMPLOYEENUMBER&
(&_WI_OBJECT_ID.EMPLOYEE.NAME&) is locked. The trip status can
therefore not be set to "approved" for this employee.
The message reveals which user is
The message reveals which user is
locking the personnel number. After unlocking the personnel
number, execute the workitem.
Thanks in advance!

Sometimes due to ENQUEUE error the Trip remains locked by WF-BATCH. I think if you now execute the workitem it will work.
Thanks
Arghadip

Windows XP Task Bar Locking Up

I recently upgraded my Satellite Pro 6100 laptop memory from 256MB to 1GB. Ever since I did this, when the PC returns from hibernate mode, the Windows taskbar is locked up. I have to reboot the laptop to get things to work properly. Anyone out there have similar experience?
Solved!
Go to Solution.

Did you disable, the re-enable Hibernation after you added the memory?
I'd recommend disabling, then restarting the machine, then enabling.
For older machines, when hibernation wasn't built in to Windows, there was a program to run to rebuild the hibernation file, but disabling and re-enabling it should do it now.

Task Bar Lock Up

Hello All,
My task bar on screen shows all A's inside square boxes instead of the normal commands. Additionally all drop down menus show the same symbols rather than the normal text.
Re-booting was no help.
Greg

Thanks for the quick response. I'm looking for my Install Tiger DVD. I can find everything else but that disc, still looking.
As for Updating the OS from the Software Update menu, I can't view the menu since is is replaced with those same A symbols, I can't navigate my way around the menu but I have been updating my software every time I get update reminders. Greg

Record lock error occurs randomly, when same task opened in 2 browser tabs

I am having an ADF UI taskflow with two flows(paths):
Flow1 - Edit DFF
ProcessParameters ----> router---> IFEDIT---->SetEditedStatusAttribute MethodCall --> editDFFpage
Flow2 - Manage DFF Accross All Modules
ProcessParameters ----> router---> IFSEARCH---->SearchQuerypanel editbutton>SetEditedStatusAttribute MethodCall --> editDFFpage
These two flows can be triggered from links in a task panel. Screenshot [http://act.us.oracle.com/~vmeka/lockerror/lockerror.JPG]
the method call setEditedStatusAttribute, calls an EOImpl method to set an attribute.
This in turn triggers lock() for all the associated EOs.
In following scenario failure occurs:
->1. Click Edit DFF task and keep the web browser tab/window open - lock is acquired.
->2. Open http://localhost7101/ManageFlex-WebApp_Test-context-root/faces/ManageFlex in another tab/window and open the Edit DFF task. lock is acquired again.
->3. In the same tab re-run the page by removing session details suffix.
Eg. http://dadvml0082.us.oracle.com:7108/ManageFlex-WebApp_Test-context-root/faces/ManageFlex?_afrLoop=19870268404083601&_afrWindowMode=0&_adf.ctrl-state=sbc4nhzgh_116
Remove the end part that starts with ?_afrLoop= and press enter in the Address bar of browser. lock is acquired third time.
->5. This re-runs the page, open Edit task again
->6. Without pressing cancel , open Manage DFF task
->7. Do not perform any search operation and open Edit FF task again. lock is acquired fourth time.
->8. Repeat steps 5-7 a few number of times
In step 5 or 7 I am hitting an exception with following message
JBO-26030: Failed to lock the record, another user holds the lock.
stack: (complete stack at [http://act.us.oracle.com/~vmeka/lockerror/stack1.txt] )
oracle.jbo.AlreadyLockedException: JBO-26030: Failed to lock the record, another user holds the lock.
at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelectForAltKey(OracleSQLBuilderImpl.java:1085)
at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:546)
at oracle.jbo.server.EntityImpl.setAttribute(EntityImpl.java:1485)
at oracle.apps.fnd.applcore.flex.dff.model.entity.DescriptiveFlexfieldEOImpl.updateDeploymentStatus(DescriptiveFlexfieldEOImpl.java:1804)
at oracle.apps.fnd.applcore.flex.dff.model.entity.DescriptiveFlexfieldEOImpl.setEditedStatus(DescriptiveFlexfieldEOImpl.java:1753)
at oracle.apps.fnd.applcore.flex.dff.uiModel.applicationModule.DFFSetupUIAMImpl.editDescriptiveFlexfield(DFFSetupUIAMImpl.java:770)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Any Idea why the lock error occurs after a few iterations, and not immediately after Edit DFF is opened in a second tab?
Thanks,
vikranth
Edited by: user10124649 on Nov 25, 2009 8:04 AM

Hi,
on the ApplicationModule, did you set the locking behavior to optimistic ? For web applications it should be optimistic and not pessimistic, which is the default setting. Select the AM and choose "Configurations" from the context menu. Click edit and select the property tabs. Look for the locking setting, which should be set to "pessimistic if you did not change it before. Just replace the current value with optimistic
Frank

Task locked by Workflow Builder

Hi all - hoping someone has run across this. i'm surprised I didn't find anything in the forums on this. I created a workflow, but realized I didn't name some of the task container elements in a few steps properly. So, in attempting to go into the send mail steps to rename the task container elements, I get the following:
"Task TS99900143 locked by Workflow Builder"
I'm unable to edit/rename/or even add new task container elements. However, I am able to make changes to other parts of the workflow (i.e. workflow container elements, etc).
Any idea what I need to do? I logged out, logged back in to see if it would get unlocked. I had this problem yesterday as well, so I thought maybe even overnight something would get unlocked, but that wasn't the case.
Thanks,
Steve

>
purvesh patel wrote:
I think we should ask moderator about that.
OK, let's get one thing straight: [Moderators|http://en.wikipedia.org/wiki/Forum_moderator] are folks who look after the forum and make sure everyone plays by the rules and so forth - a bit like a referee at a sports match.
We do not represent official statements from SAP, in fact not all moderators even work for SAP. If someone with an SAP logo next to their name says something that is different...
Now we've got that out the way, no this is not a bug. The sendmail step is just a 'special' step in the workflow builder that generates a regular SELFITEM.SENDTASKDESCRIPTION in background based on the info you supply. Since the WF builder maintains the task for you, it locks it so that the task and the WF builder don't get out of synch.
Aside from PFTC (be aware of sync issues mentioned above), you can of course also create a sendmail step manually by creating a task based on SELFITEM.SENDTASKDESCRIPTION. It will appear as a regular activity step and not have the mail icon, and it won't be locked. In some cases this is better because you have more control over the details.
Cheers,
Mike

Class 6 SD card causes problems / lock ups in Droid 2 Global

My Droid 2 Global phone came with an 8GB SD card and I want to increase it to a 16GB card. I purchased an adata 16GB Class 6 micro SD card.
I copied all my data from my 8GB card to my laptop. I then copied the data from the laptop to the 16GB card. Put it in the phone and started the phone.
The phone had difficulty seeing the SD card and locked up. Removed battery, reinstalled, restarted. Similar problem. Tried various apps and calls - worked (poorly) on some tasks, and locked up on others.
Formatted the card in the camera and then used the USB cable to move data from the laptop - similar symptoms.
Formatted the card in the laptop, placed the card in the phone, and used the USB to copy data to the card - same problems.
Stepped up the process by performing a hard reset on the phone, formatting the SD card, reinstalled apps and tested before adding personal data - still locks up.
I reset the phone again and put my original 8GB card in - once apps were reinstalled and data was pulled onto the card and everything works normally.
I really want to use the larger SD card, but I haven't been able to get it functioning..
I even saw a message somewhere that stated the Droid 2 has problems with Class 6 cards but have found nothing supporting that concept.
Any ideas?
Thanks, Grandpa777

When I replaced the SD in my D2G card with a 16GB one, I researched several cards and class ratings. Two things seemed to crop up over and over. Class ratings as an indication of maximum speed are not the same across manufacturers. Some Class 2 were faster than Class 4 and class 4 faster than Class 6, etc. Not all, but it was a crap shoot. Second, Class 10 cards did not work well in all Droids, nor did some Class 6. So I bought the following:
SanDisk 16 GB microSDHC Flash Memory Card SDSDQ-016G Class 2.
It has worked flawlessly for 8 months. And seems fast enough for my needs.
My recommendation, for what it's worth: Buy a 16GB SanDisk SD card no higher than Class 4.

User lock / Validity date?

Hello IDM Gurus,
I needed your insight on an issue we're facing; Using standard tasks from the SAP provisioning framework, we have a task that locks a user in a connected SAP system; and we have another task that sets a person's validity date to today's date (basically invalidating their account by the following day); After locking a user using the task we then go ahead and set the same user's validity date as today's date; as a result of this, the administrator lock set previously ends up disappearing. I don't believe this is normal behavior; shouldn't a validity date and an admin lock exist independent of each other? Is this happening because of the way the SAP Provisioning framework sets a validity date?
Would greatly appreciate any advice and insight on the issue!
Thanks a lot in advance!
Best regards,
Sandeep

closed.

How to lock the AD Account through OIM

Hi.
I am provisioning AD through OIM 11g using the AD Connector. I have done the create user, modified user provisioning through OIM in AD successfully without any issue.
I would like to lock the OIM account and also lock the respective target accounts when OIM account is locked.
I have done the following task to lock the account in OIM and also in AD through OIM. They are
Process Definition Task
I have created the Change Account Status task in process definition.
This task will populate the OIM Account lock status value to the AD Account is Locked out field in the ADUSER form using the OIM API. The same API is working for all First Name, Last Name etc modification without any issue.
Lookup Definition
I have added the following entry in the Lookup.USR_PROCESS_TRIGGERS Lookup Definition
Code Key : USR_LOCKED and Decode : Change Account Status
OIM Admin Console
I have logged into the OIM admin Console as a Administrator and I have search the user and click the Lock Account button. The OIM Account is locked , but target resource account was not locked and also Change Account Status task was not triggered by OIM.
Do i need to do any special configuration for account lock for the target resource.
Help is greatly appreciated.

In your System Configuration variables, find the value for "XLUserResource.ProvisionMode". Make sure this is set to Java and not DB.
>
This property determines whether provisioning of the Xellerate User resource to the user's organization occurs in the database layer through stored procedure, or in the Java layer via Event Handlers.
Note: See Oracle Fusion Middleware Developer's Guide for Oracle Identity Manager for information about Event Handlers.
This property has the following allowed values:
DB: Provisioning of the Xellerate User resource to the user's organization occurs in the database layer through stored procedure. This in turn does not trigger any further process. Therefore, custom tasks associated with the Xellerate User provisioning process that is associated with the Xellerate User resource does take place.
Java: Provisioning of the Xellerate User resource to the user's organization occurs in the database layer via Event Handlers. Custom tasks associated with the Xellerate User provisioning process that is associated with the Xellerate User resource takes place. This is applicable to the upgrade scenario, where you have your own tasks associated with provisioning processes in earlier releases of Oracle Identity Manager, and you want them to run even after 11g upgrade. In such scenario, set the value of this property value to JAVA.
>
-Kevin

How to identify if a user master record is locked

Hi,
I want to use function module BAPI_USER_CHANGE to change a user's master record (transaction SU01). But if the user that I want to change is being modified by another user, this BAPI doesn't update, correctly so. Is there a way to identify if a user master record is being edited by someone else? This way, I can find out before making the change whether the change will be successful.
Along the same lines, if I'm adding a role (from transaction PFCG) to a user ID and role is locked, I'd like to know that before hand; before I try to assign a user to that role programmatically.
Thank you for your help.
Pete

Hi
Refer this Lock Owners
Definition
Person who holds a lock.
Use
At the start of an SAP transaction, two owners are always created who can request locks.
A lock can have one or two owners. You use the _SCOPE parameter to specify this.
To determine in a program which user is currently holding a lock, use the ENQUEUE_ function module. This function module puts the name of the owner into SY-MSGV1.
Structure
There are dialog owners and update owners.
An owner is identified by his or her owner ID, as described in the section entitled The Lock Table.
A lock can have one or two owners. The ABAP programmer uses the _SCOPE parameter to define this (see below).
Example
The graphic below shows how lock owners function during a dialog transaction.
SAP LUW: Dialog Transaction with Update
At the start of the dialog transaction, the system creates two lock owners: the dialog owner Owner_1 and the update owner Owner_2.
During the course of the transaction, Owner_1 requests a lock, as does Owner_2 slightly later. When the update task is called (see also Functions of the Update Task), the lock and Owner_2 are inherited by the update task. An update work process is started with two owners, in the same way as a dialog work process, and then has three owners until the update is completed. All of the locks are released with an implicit DEQUEUE_ALL at the end of the update, at the latest.
Regards
Shiva

Change Request & Task Issue

Hi Experts,
   Please help me out for following concern.
   Changes done(In Z program) for some testing purpose, are saved in test CR.
   Now i want to save changes doin again in New CR, for further transport.But whenever i am goin to change it ,its taking either the same test CR or creating new Task in same CR. But not askin for new CR.
Some1 concerned that i have to release that CR ,then only i can do that,but i cant do it ,as it is test CR.
Please suggest solution.
Thanks in advance.
Thanks and Regards
Deepak

A Change request that is not released consists of an abject list that has details of the objects (programs, etc) that are to be transported in the request. While it is not released, it does not contain any of the details of the objects, just their object keys. These details are in individual tasks by user id.
When you release the change request, the system takes a copy of the current version of all the objects and writes it to two files in the transport directory of the SAP server - one control file and one data file. These files are named based on the request number.
<b>If you make further changes to a program before releasing the request, those changes will be included in that request when it is released.</b>
If you have made changes to a program that have been put into a change request that is not to be transported you need to manually move the relevant object list entries to the new transport request. You cannot simply delete them from the first request and then save changes to the program again as the object list entries may not be the same. Releasing the change request is not a solution as this may have the same result - the entries added to the new request may be incomplete.
For example, if you create a program it is added to a request as R3TR PROG containing program, texts, gui etc, but if you later change it and save it is added to request as LIMU REPS for program or LIMU REPT for texts or LIMU CUAD for gui.
To move manually, copy/paste values from SU10 object list of the task to a new request/task. Once 100% sure it is OK in new request, delete line from old task then lock object in new request (select line and use padlock icon). For customising there may be object keys associated with the line that you also need to copy. Take care to ensure all relevant objects are in the new transport.
Andrew

Delete request in which a task has been released

Is this possible?
cheerz

Once you release the task, the Objects tied to the task are locked to protect the changes. This prevents the Request to be deleted as it has locked objects. What you can do is release the Request & ask your Basis person to delete the Request from the buffer. This will prevent the changes from getting transported.
~Suresh

Task is locked

Similar Messages

Maybe you are looking for