Task is missing when import

Hi,
when i try to transport Request number both ChangeRequest and Task are present but when after i imported the Task is missing in destination only CR is present .help me solve this problem.
thanks,
pugazhraj.

Not enough information... you need to be more specific and add all the information relevant to the problem so we can help you.
Read the "Rules of Engagement"
Regards
Juan

Similar Messages

Exchange 2013 - Folders missing when importing PST to archive mailbox

Hello,
I'm having an issue when importing PST files to an Exchange 2013 archive mailbox using the command "New-MailboxImportRequest
test -FilePath '\\server\e$\ArchiveExport\test.pst' -IsArchive -BadItemLimit 5 -ErrorAction Stop"
The import is running without an error and shows the status complete. The size of the archive mailbox is exactly the same like the size
of the PST file!
But when I check the users archive mailbox some folders are missing. It seems that this happens only to default folders like "Inbox"
or "Sent Items". Other folders are visible.
The mailbox import log shows the following:
16.01.15 16:31:56 [server] Merging folder '/Top of Personal Folders/Inbox [Inbox]' into '/Inbox [Inbox]'.
16.01.15 16:31:56 [server] Copying 3 items, 4.789 KB (4,904 bytes). Skipping 0 items, 0 B (0 bytes).
If I start the import process again the log says the following:
16.01.15 16:46:54 [server] Merging folder '/Top of Personal Folders/Inbox [Inbox]' into '/Inbox [Inbox]'.16.01.15
16:46:54 [server] Copying 0 items, 0 B (0 bytes). Skipping 3 items, 4.789 KB (4,904 bytes).
So it seems that the mails are really there but just not visible.
I did some tests:
When I import the PST file directly to the users mailbox (without parameter -IsArchive) I can see all content of the PST file.
When I add the parameter -TargetRootFolder "Testfolder" the whole PST content shows up correctly under that folder.
Can anyone explain this?
Regards

Hi PhilippMair,
Thank you for your question.
If all subfolders were merged, we could use OWA to check if the missing folders is appeared. If we could see missing folders by OWA, I suggest we recreate outlook profile and reset outlook view.
In order to troubleshooting, I suggest we collect the import log to analysis if the subfolder of Inbox or Sent Item is exported.
In my test lab, inbox has three subfolders, there are 123,456,789; when I import PST file, I will see the following log:
1/20/2015 7:32:31 AM [EXCH2-CU1] Merging folder '/Top of Outlook data file/Inbox' into '/Top of Information Store/Inbox'.
1/20/2015 7:32:31 AM [EXCH2-CU1] Copying 18 items, 302.3 KB (309,594 bytes). Skipping 0 items, 0 B (0 bytes).
1/20/2015 7:32:32 AM [EXCH2-CU1] Merging folder '/Top of Outlook data file/Inbox/123' into '/Top of Information Store/Inbox/123'.
1/20/2015 7:32:32 AM [EXCH2-CU1] Copying 5 items, 62.21 KB (63,699 bytes). Skipping 0 items, 0 B (0 bytes).
1/20/2015 7:32:33 AM [EXCH2-CU1] Merging folder '/Top of Outlook data file/Inbox/456' into '/Top of Information Store/Inbox/456'.
1/20/2015 7:32:33 AM [EXCH2-CU1] Copying 1 items, 6.908 KB (7,074 bytes). Skipping 0 items, 0 B (0 bytes).
1/20/2015 7:32:33 AM [EXCH2-CU1] Merging folder '/Top of Outlook data file/Inbox/789' into '/Top of Information Store/Inbox/789'.
1/20/2015 7:32:33 AM [EXCH2-CU1] Copying 1 items, 21.31 KB (21,820 bytes). Skipping 0 items, 0 B (0 bytes).
We could check if there are any subfolder which would not be merged and copied. If your import log has any abnormal, I suggest you send log file to
[email protected] for our troubleshooting.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

Video missing when importing Nikon V1 movies

When importing movies in FCPX from a new 1-series Nikon V1 camera only the audio is captured, not the video. The same files (video and audio) play fine in Quicktime and are also captured without problems (although very slowly) in iMovie.

Hi I have bought the Nikon V1 and use it with the 10-100 Vr PD lens. I have just come back from a Skiing Holiday which gave me the opportunity to Test the camera.
I also use a Panasonic AG AF 100 Pro Video camera also
Due to size and weight I only took the V1 only
When I watched the replay on a HD television I was blown away by the quality of this little camera Definition in snow conditions were incredible, fast focus ease of use and LIGHTNESS!
I would compare the cameras as equal, although there are more things you can do with a Panasonic but at 5 times the price
So anybody considering this camera the V1, don't be put off, I am sure the market will soon make the appropriate converter which will solve the current problems
Regards John-Paul2

Namespace /CRYSTAL/ missing when importing requests

hello,
I'm trying to install the business objects xi release 2 integration kit for sap but when importing the requests the system says that
there is a problem with the namespace /CRYSTAL/
This namespace doesn't exist in my system (abap netweaver trial).
any idea on how to create this ?
regards

Hi,
the SAP Integration Kit includes a set of ABAP Transport that you need to import into your SAP Server.
ingo

Artwork tab is missing when importing home videos

When I import a home video mp4 file, the artwork tab is missing. This only just started to happen. Any idea how to get the artwork tab to appear? This doesn't happen consistently.

GUIDES TO: Converting Video for iPod - Mac & Window
http://forums.ilounge.com/showthread.php?s=&threadid=123067
The Complete Guide to Converting Video to iPod Format (Mac)
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-convert ing-video-to-ipod-format-mac/
See other tutorial articles over at iLounge...
http://www.ilounge.com/index.php/articles/tutorials/
Patrick

Half of audio missing when importing .avi

Hi, I am having some trouble with importing avi-files in Premiere Pro 5.5. I searched forum, read and did the troubleshooting guide at the wiki plus searched through the Adobe Premiere Pro Help without any result.
Today I've been editing for 8 hours and everything worked fine. I imported some clips and used some of them. But then I messed up the bin-structure so I cleared the whole bin and started importing them again. I also deleted the sequence so no clips where in use.
But now when I try to import the exact same file that worked before, The audio gets out of sync exactly half of the movies length. Like the audio starts in the middle of the clip while the movie starts from the beginning. So half way through the file it gets quiet because the audio ends there.
I rebooted my laptop and restarted Premiere Pro. Now I've also reinstalled it. The files play fine in Media Player, VLC and Quicktime.
Thankful for any kind of hints that could solve the problem
Edit: now there is no sound at all - sometimes.. it kindof differs
Edit2: now it started working again - although sometimes it works and sometimes it don't.. sooo annoying
But if any one else gets this problem: restart restart restart restart, ;<

Thank's a lot for the help and the reading! I got a lot more wiser about codecs and the details behind the file extension.
I shot the video (and audio ) with a Nikon D300 DSLR.
Here is the specs of the camera if needed.
http://www.dpreview.com/news/2009/7/30/nikond300s#specs
I ran the errored file through G-spot and this is the result. This is currently the only file that isn't working. Before, another file didn't work, but then it started working and now this file isn't working. At this point I imported all the other files into Premiere and they seem to work at the moment.
Also, there is a red line above the video clips in the timeline even before adding any effects. The project is 25 fps and my videos are 24 fps. I didn't realize until now, hehe. Here is my sequence information.
Properties
6_Middagen
1280 x 720
00;11;20;05, 25,00 fps
48000 Hz - Stereo
Settings
However I also tried importing and adding the same video clip on a Sequence with the settings
Editing mode: DSLR
Timebase: 24.00 fps
Display format: 24 fps Timecode
The rest of the settings are the same as in the picture above. This time I didn't get any colored render line. But the audio problem was still there.
This is my project. You can see the waveform disappearing right after my timeline marker.
I Googled "Nikon D300s h.264" and got a lot of results saying it does use it. I know my video files didn't work in CS4 before but the Nikon support said they would work fine in future updates of Adobe Premiere Pro. I am using Adobe Premiere CS5.5 though.
The weird thing is that one file randomly stopped working. Then it started working again and now another file isn't working.

Audio missing when importing clips

Hi, importing clips from my Sony handycam, no audio is available. Even opening the single clip file with Quicktime, no audio. Don't think it's the camera, as long as I tried with another similar model and the same problem occurs.

Hi all, just updating iMovie to 9.0.7 version the issue was fixed.
Thx all

When importing tracks from a CD to iTunes, only 10 of the 13 songs are imported or shown on the list. How can I import the missing three?

When importing tracks from a CD to ITunes, only 10 of the 13 songs are imported. How can I display and import the missing three? Thanks.

It depends on eaxactly what is wrong with the old laptop. If you're lucky the drive can be extracted and connected to a new computer to extract the data. Otherwise see Recover your iTunes library from your iPod or iOS device.
tt2

Download Presenter trial in your website but when I published object scorm in zip file miss some important file such as ismmanifest.xml. In fact Moodle upload is wrong! Is it a bug or what? Thank you.

Download Presenter trial in your website but when I published object scorm in zip file miss some important file such as ismmanifest.xml. In fact Moodle upload is wrong! Is it a bug or what? Thank you.

You can publish Adobe Presenter Projects to your Moodle LMS (this will work for many other LMS’ too.)Please follow the steps as mentioned in the blog linked below.
https://blogs.adobe.com/presenter/2013/08/step-by-step-how-do-i-publish-my-presenter-cours e-to-my-learning-management-system.html#more-6260
Regards,
Rajeev.

Why are missing items when import pst files to Outlook 2011 for mac?

Hello.
After installing Office 2011 for Mac I configured Outlook and it was allright.
But when I tried to import a pst file from the old laptop who has Office 2007, I found that in the Outlook 2011 Inbox I have only ~60% items comparative with the Outlook 2007 Inbox.
From Microsoft Office forums I've got an answer that there are indeed some reports with missing items when import pst in Outlook 2011 but the solution they gave me (create folders in Inbox before import) doesn't work.
Do you know something about this kind of problems?
Is it a feature in Outlook 2011 which automaticaly select/delete/combine items based on the similarity between them or based something else?
Have you an ideea how to finally use this macbook and in the same time all my old emails?
Thanks.

Hi Steve,
Thanks for this-yes, eventually, I do send/receive fine, once I've poppedd my passwords in.
I think you are right in that BT seem to be having unique server/login issues...at least this is what I've read elsewhere too.
Iroonically, this AM I opened my new Mac and have *not* been asked for passwords so perhaps the changes I made in the settings yesterday (keychain reset in Mac) and also changing it from smtp.....to mail.btinternet.com solved the issue...who knows? All I know is this last week I've nearly lost the will to live on more than one occasion, from the transition from PC Windows Live Mail to Outlook for Mac.

When importing clips to iMovie11 the audio is missing. I have been able to successfully to this in the past and all of the sudden it is not working. Any help to solve the problem would be appreciated.

When importing clips to iMovie11 the audio is missing. I have been able to successfully to this in the past and all of the sudden it is not working. Any help to solve the problem would be appreciated.
Thank you for your help!

Download/install an app is a know possible solution.
3. Install another app from the App Store
If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
Above from Apple's :
iOS: Troubleshooting applications purchased from the App Store

When importing my images some of them are missing how do i retrieve them

when importing my images some of them are missing . how do i retreive them ?

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).
If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.
You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.

ORA-00926: missing VALUES keyword | when importing data

Hello,
I get the missing VALUES keyword error when importing data from an Excel spreadsheet. Until yesterday everything worked fine. Today I'm having this problem because OSD does not build the DML correctly. See:
insert into WFT_GROEPEN (CODE,OMSCHRIJVING,NIVEAU,INDIC_LAAGSTE_NIVEAU) VALUES('1.1.1.1','- Value of business acquired',4,'N');
Working with OSD 1.2.1 on Windows XP.
Anyone got a clue?
Kind regards,
Dennis

Hi,
Thanks for your reply. I found the problem myself. I got 2 columns in the Excel sheet with the same name. Then OSD creates an insert statement like following which gives the 'missing VALUES keyword' error.
insert into WFT_GROEPEN (CODE,OMSCHRIJVING,NIVEAU,INDIC_LAAGSTE_NIVEAU)NIVEAU) VALUES('3','Toelichting balans beleggingen',NULL,'N',NULL);
Regards,
Dennis

Error when importing IDOC structure from SAP - Control record missing

Hi!
We are hitting problems when importing IDOCs from SAP into the Integration Builder. The import ends successfully but when we drill into the IDOC structure we get a message: <b>Schema for type EDI_DC40.ASN_OUT.DELVRY01.Z1DELVRY (category Data Type) not found</b>. This is only happening for one specific IDOC type only. We have checked all we can think of but cannot get this to work. Any help would be very much appreciated. Of course, points awarded for any good ideas. Thx, Duncan

Hi Duncan,
Taka a look at these threads which address similar issues:
Error during import of FIPARQ01 Idoc
Error during IDoc Import
Importing idocs:
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/78/21753251ce11d189570000e829fbbd/content.htm
Hope these help!.
Cheers,
Chandra
Message was edited by: chandravadhana gopalakrishnan

Missing Metadata Presets when importing sample library following book

ISSUE: NO METADATA PRESETS available during import. (Aperture 3)
DESCRIPTION:
I have just installed Aperture 3. I am following the Aperture 3 book. When importing the sample Wyoming pictures into the Sample Library , I am directed to choose "basic info" as my metadata preset. I am not able to select "basic info" as a metadata preset. The drop down arrow only yields "none" and "edit". Edit is all grayed out.
I then tried it in the Main/real Aperture 3 library. I tried to import a few pictures from a a hard drive. Same issue. NO METADATA PRESETS AVAILABLE FOR IMPORTING INTO APERTURE 3.
Thank youl

Here is the answer for anyone who may hae same problem:
Delete the following files from Application (Aperture) /Support :
1: import Presets.plist
2:MetadataSets.plist
3:Metadata Presets.plist.
Removing these has restored the basic metadata presets.
Hope it helps.
Thanks

Task is missing when import

Similar Messages

Maybe you are looking for