Task License Validation Error Message/ Automatic Scheduling for Disk Defrag is not working.

I saw where I could possibly ask you for answers to the problems that I am having with Windows 8.1 pro. First of all I noticed that my disk defragmentation task which was set on daily wasn't operating. It indicated that the last time it ran all disks
for disk defrag was back on 4/20 and on the this morning of 4/26 there was the date 4/20 for all the disks. I went into the Administrator Tools section of Control Panel and found Schedule Tasks. When I opened Schedule Tasks I got the
error message that indicated a Task License Validation Error. It went on to read:The task XML contains a value which is incorrectly formatted or out of range. This is my question...are the two related...the inoperative automatic maintenance of disk defrag
and this error message from task scheduler? And how do I address each issue to solution. Thank you very much.
[email protected]

The MSDN Windows and Windows Phone app development forums are for developers to discuss writing their own Windows and Windows Phone apps.
For help using Windows please post on the Windows forums on
http://answers.microsoft.com .

Similar Messages

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
VIBAC

I downloaded and installed
OS X Lion 10.7.5 Supplemental Update
and that solved my problem completely. (368 AU plugins now works!)

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN

JSF error message: Automatic prompting for file download

This is a weird problem. I have a JSF application wherin I popup a new window on a submit button.
The window opens a test.jsf page that redirects the output to a servlet1.
Servlet then based on some parameters does a sendRedirectI() to different servlets out of context.
Now the issue is that when the output is redirected to out of context servlet, that returns a file download.
If in IE browser, if one does not do a setting of "Automatic prompting for file download", this window that I had opened on submit buttton vanishes in a jiffy. If the IE setting is done, it shows the file download correctly.
I would want to show the user some kind of message by which he/she understands that this IE setting has to be done.
I have tried several ways:
1. Javascript: window.onbeforeunload on the test.jsf so that when the window unloads i can show some message. But since test.jsf forwards to servlet1, the html page generated does not show my script.
2. I also tried checking if some windows registry can help me understand the setting.
3. I tried writing in response object the javascript and then redirecting it to servlet out of context. But I guess sendRedirect() does a new request, so this did not help.
Can anyone help? I am not sure if I am able to explain my problem correctly.
Yani

Here is the result.I used your code and it worked fine with IE setting Enabled. But when I tried to access the download servlet after opening a new window, it doesnt download the file.

Officejet Pro 8600 Premium error message The drivers for this device are not installed. Code 28

Printer : Officejet Pro 8600 Premium. model CN577A
OS : Microsoft Windows 7 Home
Basic 64
How is your product connected to your PC? : Network
Problem description : In Device Manager I've got an error message with the
Officejet pro 8600 icon - "The drivers for this device are not installed.
(Code 28)
There is no driver selected for the device information set or element." I
have uninstalled and re-installed the driver to no effect. The printer
appears to be functioning properly.
This question was solved.
View Solution.

Hello,
Yes, i too would suggest a clean re-installation of the software.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Upgrade would not install (3.6.8) error message Licence file for this version could not be found

The latest upgrade 3.6.8 downloaded but would not install. Error message read "the licence file for this version could not be found.". Visit Firefox homepage for more info
== I tried to install the latest Firefox upgrade. Have tried about 6 times

It can also help if you delete the Firefox program folder (C:\Program Files\Mozilla Firefox) before installing a new full Firefox copy.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that are locked in any way.
You can skip the step to create a new profile, that is not necessary for this issue.

Cannot install OSX 10.4 (no valid error message) - why?

Hi everybody. I've been trying to install Mac OS X 10.4 on this G4 Quicksilver, but it seems that it's impossible. When I boot from the CD, it tells me "Mac OS X 10.4 cannot be installed on this computer" and promptly tells me to restart. It doesn't really give a valid error message, not even in the install logs.
I've currently got Mac OS X 10.2.8 installed. Another issue may be the fact it's fitted with 1 GB RAM that runs on a different speed than the other 1 GB, but I doubt it. I really wonder why I can't seem to install the new system, since I seem to meet the requirements pretty easily.
Thanks for your help.

Hi gja,
first of all: WELCOME TO THE DISCUSSIONS!
Most disk sets sold on eBay or similar sites are hardware specific software install disks. You CANNOT use hardware specific software install&restore disks that shipped with another computer. These simply do not contain the hardware drivers for any other computer model but the one they originally shipped with. You have to buy the retail full install DVD.
Besides this technical limitation it would also be ILLEGAL (unless you can guarantee and prove that the original owener completely erased it from his computer). Apple's Software License Agreement states in point 2:
2. Permitted License Uses and Restrictions. A. This License allows you to install and use one copy of the Apple Software on a single Apple-labeled computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time,...

Error messages or information for the invalidation of those procedures

Hello expert:
I have a few procedure invalidated . in principle , those procedures should be validated automatically when they are called somewhere. but they don't, that means there are some error blocking them validated. please where I can find out corresponding error messages or information for the invalidation of those procedures.
Many Thanks.

CREATE TABLE t
AS
   SELECT 1 id FROM DUAL;
CREATE OR REPLACE PROCEDURE my_procedure
AS
   v_id   t.id%TYPE;
BEGIN
   SELECT id INTO v_id FROM t;
END;
CREATE OR REPLACE PROCEDURE my_proc2
AS
BEGIN
   my_procedure;
END;
exec my_proc2;
DROP TABLE t;
ALTER PROCEDURE   dsamstrc.my_proc2
   COMPILE;
SELECT *
FROM SYS.USER_ERRORS
WHERE NAME = 'MY_PROC2'
       OR NAME IN (SELECT REFERENCED_NAME
                     FROM dba_dependencies
                    WHERE NAME = 'MY_PROC2');
NAME     TYPE     SEQUENCE     LINE     POSITION     TEXT     ATTRIBUTE     MESSAGE_NUMBER
MY_PROCEDURE     PROCEDURE     4     4     2     PL/SQL: SQL Statement ignored     ERROR     0
MY_PROCEDURE     PROCEDURE     3     4     27     PL/SQL: ORA-00942: table or view does not exist     ERROR     0
MY_PROCEDURE     PROCEDURE     2     2     10     PL/SQL: Item ignored     ERROR     0
MY_PROCEDURE     PROCEDURE     1     2     10     PLS-00201: identifier 'T.ID' must be declared     ERROR     201
MY_PROC2     PROCEDURE     2     3     5     PL/SQL: Statement ignored     ERROR     0
MY_PROC2     PROCEDURE     1     3     5     PLS-00905: object DSAMSTRC.MY_PROCEDURE is invalid     ERROR     905wonder if something like this would work if the dependencies were more than 2 deep.
SELECT distinct *
FROM SYS.USER_ERRORS
WHERE NAME in
       (SELECT name
        FROM dba_dependencies
connect by nocycle name = prior referenced_name
start with NAME = 'MY_PROC2')
order by name;Edited by: pollywog on Apr 4, 2011 2:49 PM

Validation error message in a confirmation box.

To provide any validation error messages i am using the throw OAException, but that displays at the top of the page where many times users dont even notice it. i want to be able to instead display the error msg in a confirmation box that has just the OK button to make sure user has seen the message......
how do i do that ? (i do not want to use the DialogPage becos that takes me to another page and also is not for raising exceptions).
thank you.

Hi,
You have to use OADailogue region to achieve this. Please follow below code units to create a dialogue page and display an error message.
OADialogPage dialogPage = new OADialogPage(OAException.WARNING, message, null, "", "");
String yes = pageContext.getMessage("AK", "FWK_TBX_T_YES", null);
String no = pageContext.getMessage("AK", "FWK_TBX_T_NO", null);
dialogPage.setOkButtonItemName("DeleteYesButton");
dialogPage.setNoButtonItemName("DeleteNoButton");
dialogPage.setOkButtonToPost(true);
dialogPage.setNoButtonToPost(true);
dialogPage.setRetainAMValue(true);
dialogPage.setPostToCallingPage(true);
dialogPage.setOkButtonLabel(yes);
dialogPage.setNoButtonLabel(no);
java.util.Hashtable formParams = new java.util.Hashtable(1);
formParams.put("foo","value");
dialogPage.setFormParameters(formParams);
pageContext.redirectToDialogPage(dialogPage);
Thanks
Bharat

Validation error message in JSF 1.2

I am testing my Web application inside Tomcat 6.0.2 and using JSF 1.2. I was surprised to see that validation error messages do not only display the custom error message, but also the id tag and a "Validation Error: " text. For instance, if an input text component has the required property set to true and the user does not fill in value, the following error message will be displayed on page submiision: "hello:test: Validation Error: Value is required." instead of just "Value is required.". I am wondering if there is a way to silence the id tag and the "Validation Error: " text. hello:test id tag reflects the fact that the form has an id of "hello" and the input text component an id equal to "test".

Hello
I'm quite new to this technology. Would like to know how can we replace the 'annoying component id' with label while generationg validation/conversion error message.
E.g:
'for:compID' some error message
must be formated as
'compLabel' some error message
I happened to know that this feature is supported in JSF 1.2 impl. But didn't work for me with Sun RI.Can any body give me some sample code snippet for the same
Thanks
Jobinesh

KI222 - Inappropriate Cost Center Not Valid Error Message

Iu2019m having a problem goods issuing material to a cost center (movement type 201) via a call of the BAPI_GOODSMVT_CREATE BAPI (ECC 6.0). I can post a specific material / plant / storage location / cost center combination without issue via MB1A but when attempting to call the BAPI processing the exact same data, I get the error message KI222: Cost center aaaa/ccccc does not exist on 05/14/2009. (where aaaa = the appropriate controlling area and ccccc = the cost center). Iu2019ve checked the validity dates on the cost center via KS03 and all looks fine (the cost center is valid until 12/31/9999). The cost center is valid on the posting and entry date I'm passing in the BAPI header.
Any ideas what I may be doing wrong or if thereu2019s some field Iu2019m not appropriately selecting / flagging in the BAPI. Iu2019m using the BAPI successfully for several other movement types (701, 702, 551, 552).
Thanks,
Randy

Hello,
Go to OKKS and set your controlling are correct.
Then go to KS03
See the from validity. If there from date is in past then there should not be any issue.
Make sure that your entry is using current date not old dates in the data using BAPI
You can switch off the message for the time being.
Go to OBA5 and application area KI and message number 222.
Switch off the message for online and batch entries.
This is only for temporary purpose till you pass on your BAPI. But this is not suggest to do it in production system, as this is deviating from standard functionality.
If the message is not available in OBA5, first go to OBMSG transaction code add the message there to the application area (tick switch off message check box) and then come to OBA5 to switch off the message.
Regards,
Ravi

Interactive Report validation error messages...

Hi guys!
I was looking for answer to this question for a long time now...is it possible to change the validation error messages in interactive report?
With regards,
PsmakR

Hi,
there are more validations than you think. Anthony Rayner has prepared a nice summary in a [url http://anthonyrayner.blogspot.com/2010/08/apex-40-enhancements-validating-form.html]blog post.
You see in that post where and how to disable validations, but also, that you may not disable all of them. The only way to avoid all validations would be to implement the report yourself completely.
The good news is, you can overwrite those messages. The following documentation tells you how to:
http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/global.htm#CHDEDHBJ
-Udo

License validation error

Has anyone any experience with this nasy license validation error? It occurs in the AL BPM Process Administrator when I attempt to deploy a published process to a J2EE app server.
Error: enterprise: license error, license ouwithprocess validation failed!
Note that this only started to occur after I upgraded to AL BPM 5.7 service pack 1. This error did not occur before sp1.

The Evaluation Enterprise license has a limitation where you can have up to 2 concurrently deployed projects at one moment in time. If this is the case you will receive this error message. Can you validate if this is the case ?
Thanks !
eduardoc.

Localising Validation Error Messages

Apex 3.1
I'm trying to localise all my validation error messages.
I've created an error message Datevalidation as type pl/sql expression.
When I test the error message I just get DateValidation rather than my translated error message.
How do I specify how to return an error message name which is translatable

Hello Keith,
I’m glad things are working for you, however …
>> I realised that I had to change the validation error message type to function returning error text
That’s a bit puzzling to me as this type of validation – function returning error message – is the least supported option in the APEX translation mechanism. Can you please describe how you translate the error message inside the PL/SQL code?
Thanks,
Arie.
Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.

Validation Error Message in OBPM 10GR3 Presentations

Hi all,
I have a presentation which has some fields as REQUIRED Fields... For e.g. the From Date field is required...
I select "YES" for the Required option in the properties tab for that field in the presentation and also put a Validation Error Message which says " From Date Required".
I thought that the Validation Error Message would show up when the date is no selected or filled..
But instead the name of the variable used showed up.. i.e. TestObjectFromDate..
Why is that so?
How can I make the Validation Error Message show up instead?

No this sounds odd, but you might find it's easier not to use the "Required" property for BPM Object presentation text fields.
Try making the Submit button on the form invoke a method (instead of the default "submit" action). In the method, try this:
if someField = null || someField = "" then
    // set the background of the field to red
    setBackgroundColor this
              using componentId = "someFieldName",
                         color = "Red"
    focus("someFieldName")
    setVisible this
      using componentId = "errorTextField",
          visible = true,
          collapsed = false
    someErrorText = "Please enter a value in the field highlighted below"
else
    submit("Submit")
endThis would put your cursor in the offending field and make its background red. It also would make a text field visible on the presentation and set its value.
This assumes that "someErrorText" is a String attribute of your BPM Object that is placed somewhere on the UI.
Dan

Task License Validation Error Message/ Automatic Scheduling for Disk Defrag is not working.

Similar Messages

Maybe you are looking for