Task list component...

Client wants to see task lists that have components on them and what the components are. Could any on please help me to get the Task list. Any pointer from any side will help me a lot. Thanks in Advance.
Thanks
Azizur

Hi,
Pls check Tcode IA17 (Task List Printing List) with Output volume parameter selection as Material, Long Text Material etc.,
Regards
Siva

Similar Messages

PM:Task list Component addition

Hello Guys,
We are facing below issue.
1. In task list component screen, if we add a component via Direct entry, system create Standard BOM.
2. If we add the component via component selection from BOM, it creates the material BOM.
The second method is preferable as changes in BOM is reflected in task list as the link is maintained. This is not an issue if we are creating task list manually as we can select the component manually. But however, if we create task list via LSMW or load program, the issue arises.
When contacted SAP on OSS, SAP advised to use BADI IMRM_COMP_PROCESSING, method SET_COMP_PROCESSING with
E_CORRECTION_ACTIVE = ' '. This seems to resolve the issue. But I am not sure of the side effects.
Has any one implemented this BADI earlier and can share the experience?
Thanks
Ashish Barsagade

hi,
U can assign material BOM in Tasklist header... there is a Assembly field... just enter the name of Material BOM. and Material BOM would be attatched to task list.
it will solve ur problem
Regards,
Amit kushwaha
Edited by: amit kushwaha on Feb 25, 2008 10:45 AM

General task list: component selection from BOM - possible in batch input?

Hi experts,
for the assignment of non-stock material to general task lists I have followed the advice from message[6115684|Re: General Task List Components;.
So what I have done is:
- Include non-stock material in BOM
- Assign BOM to general task list header
When clicking on the "Component selection" button in the task list components, I can select a component.
When entering the material number of the component directly though, I get an error: "Material type X and line item type L not compatible" (CO135).
I would like to upload the general task lists with a batch input recording, but I can't figure out how to select components.
Any thoughts?
Kind regards,
Andreas

Hello,
We have the same requirement to load tasklists (change & create). We are using the function modules EAM_TASKLIST_CREATE and EAM_TASKLIST_CHANGE. However, i cannot get a non-stock BOM item to process. Has anyone got this working?
Thanks,
Clay.
EDIT: Found the answer - simply fill in the fields for BOM on the component (STLTY, STLNR, STLKN, and STLAL).
Message was edited by: Clayton Mergen

Non-stock material assignment in task list

Hello members,
Can I assign non-stock materials in task list????
If yes then how???
Thanks
Warm regards
Rajat

Rajat,
You cannot directly assign a non stock material to the task list.But you can include the non stock material in the BOM for the assembly(In case of General task list) or Equipment /FL object BOM.Once its included you can then select these non stock items into the task list component screen.
Regards
Narasimhan

Uploading Master Data for General Task List

Hi gurus,
I want to Upload General Task List through LSMW. It is displaying the Program name as IBIP instead of RIIBIP00 for the Object 0490.
How to overcome it and how to "Maintain the Structure Relation".
Help me out. Our's is ECC 6.0
I have to upload this one in our Client's place. Very urgent.
Points will we rewarded.
Regards,
Charles S.

Hi,
You should go ahead with IBIP.. Create ur struture in step 2 and step 3
then finally in step 4 SAP will provide following str.. just mapping structre u created in step 2 here to respective one .
                                                                                IBIPTLST IBIP: Task List header
          The target structure IBIPTLST must be selected.
     IBIPTEXT IBIP: Long text line
       IBIPTLOP IBIP: Task List Operation
         IBIPTEXT IBIP: Long text line
         IBIPTMAT IBIP: Task list component
           IBIPPRTS IBIP: PRTs (production resources/tools)
             IBIPTEXT IBIP: Long text line
         IBIPMPAC IBIP: Maintenance Packages
     IBIPBDCD IBIP: Direct BDCDATA: formatted BDCDATA: expert use
You may provide mapping only for those str which u r going to use ...rest can be ignore...
Enjoy SAP.
Pankaj Singh.

Add component in task list

Hello All,
I have an issue with adding component in task list (for example task list number EIMN-68) via transaction IA05.
When I try to add component to operation, I get the message *
Standard BOM PAEIMN-68 4 already exists
Message no. 29771
Diagnosis
You want to create a standard BOM for standard object PAEIMN-68 with usage .
A BOM already exists for this standard object and usage. You cannot extend a standard a standard BOM.
Procedure
Check whether the standard BOM is suitable for standard object PAEIMN-68 and usage . If it is not, you need to create the BOM for another standard object.
Is there any special way to create material master for such components.Whats the solution.
Please help
Cheers
Sunny

Hi Pithan, how are you..
I want to add components.
Just now I was able to add components. I explain how:
When i added component number in operation, and press enter, system gave me the error that standard bom already exist. In the same screen I changed the BOM usage to 3 as universal usage. After this usage only, system allowed me to add components. No other bom usage allowed me to do so.
Also, why system took me to BOM screen if I just want to add components.
I wait for your reply.
thanks and regards
Sunny

General task list with component : creating standard BOM

Hello,
When adding a component to a general task list , i get a "create standard BOM" screen , see below for example :
Standard object PA00000212
Plant
BOM Usage       4
Change Number
Valid From           07.09.2009
Can someone explain to me the relation between standard BOM and component within a general task list ?
Thanks,
P.

Hi,
Pls find some of the points below for your referece
Standard BOM:
Can used for assigning the material from the BOM to Task list operation
That is, BOM components for the object (Equipment, Functional Location , Assembly) can be retrived and assigned to maintenance Task list of the operation
Condition: BOM corresponds exactly to the content of the structure list
Free Material Assignment:
Assigning Stock Material (Material number) those are not listed in the BOM of maintenance object directly to the maintenance task list
Condition: Setting to be done as BOM usage for Plant Maintenance (4)
Path: Maintenance plans, work centers, Tasl Lists and PRTs>>>>>Tasl Lists>>>>>Control Data>>>>Define Presetting for Free Assignment of Material-----BOM Usage as 4
Pls note that, while making free assignment, system creates an internal BOM and this can not be processed from application.
Hope this may useful
Thanks
Siva

DB table holding the component materials in task list

Hi all,
I'd like to find out the relationship of the component materials inside a task list (IA07).
I've found DB table PLKO and PLPO holding the data for task and operations respectively. Inside an operation, there are components. I just can't find the DB table holding the components by F1 and where-used list ...
Any advice?
Thanks a lot.
Message was edited by:
Macy Lo

PLMZ-PLNTY = PLKO-PLNTY
PLMZ-PLNNR = PLKO-PLNNR
PLMZ-PLNAL = PLKO-PLNAL
PLMZ-ZAEHL = PLKO-ZAEHL
PLMZ-PLNTY = PLPO-PLNTY
PLMZ-PLNNR = PLPO-PLNNR
PLMZ-ZUONR = PLPO-PLNKN
PLMZ-ZAEHL = PLPO-ZAEHL
if helpful, reward
Sathish. R

Mass component substitution in Task List

Hi Gurus,
I'have so many Task Lists, and total have hundreds of line operations.
But, now there material substitution. Let say, previously in Taks List using Material/Component "A", and now material "A" substituted become material/compenent "B".
How could we do change (mass change) to all Component in Task List that previously using "A" and than replaced by "B" and how about if there are unit of measure differences .
How do we do it ? Any T-Code to do this ?
Regards,
Tri W

Tri W,
The material will be replaced, with the follow up material, once there isnt sufficient quantity available to satisfy the demand from the reference date entered on the MRP screen.
However, it looks like this replacement of the follow up material only works if you manually enter the orginal material in the components tab or if you import the material from a BOM.This doesnt seem to work if the material is directly associated to the Task list(Even though this is also assigned a BOM number of Type "standard") . When you import the task list into the order, the Original material is not replaced with the Follow up material if there isnt sufficient stock available.This looks like a bug to me, you may want to consider raising a OSS note to see where that leads you, otherwise my apologize for misleading you. We had used the BOM and this worked perfectly for us,hence i was pretty sure this would work for materials assigend directly to task list(Since this also had a BOM number and type assigned to it).
Best Regards
Narasimhan

Mass change of component in Task list

Hi Experts
I have thousands of material and there are changes done for them to use them in maintenance order task list as stock or nonstock.
The task is to change the item category (from L to N or from N to L) of those materials used as components in task list and also find out those materials in BOM , Equipment TL and FL TL and change the item category.
1.can this be done using a BDC (checking all task list / BOM for that material and change the item category)
2. table to check component assigned to which operation in task list.
Any help for this requirement
Thanks
Jey

There is no standard transaction for the changing of components in the task lists this would have to be a bespoke program.
If you are looking to change the components allowcated to the Bills of Material you can use transaction CS20 where you can replace the exisitng component category N with the new component category L.
There is transactions for changing the PRT and Work Center if you get your ABAP consultant to have a look at the PRT transaction/program (transaction CA77) he may be able to copy and ammend this to make things a little easyer.
Jim

Component allocation to Euipment Task list

Hello frinds,
I have a query related to Plant Maintenence.
We have a euipment task list with different counters . In each counter we have operations and components assigned to those operations.
When order is created some of the operations are not getting copied and hence few components as well.
Please tell me tables where i can find the allocation of compoenents to operations.
Thanks
Rohit

Thanks Mahee,
The table i was looking for is PLMZ (allocation of components to operations)
I found that deletion indicator is set for certain operations in PLMZ and those components are not picked which are assigned to operations with deleltion indicator (LOKEZ-PLMZ).
Can any one tell me how this deletion indicator is set for component allocation to operations and how do i remove this ?
Thanks for help.
Rohit

Routing-LSMW-Component Allocation to task list

Hi Gurus,
I'm creating LSMW to Routing using Standard-Batch Input method, have mapped the required structures.
But I was unable to map the Component allocation to task list.
Is it possible in the standard one else I need to go for some sort customisation.
Can anybody throw some lite on this issue ?
regards
Ram Kumar

Hi,
You will find BIPMZ Batch input structure for component allocation to task list in the standard structure relations (no customizing required). Use the same for your need.
Hope it clarifies your query.
Regards,
Vivek

Solman Change Request Management Issue - about create task list

Dears,
We are now using Solman ChangeRM. I have created a maintainance project and maintained its logical component and IMG project. when I want to create a task list for this project, a message"The project is not released. Hence cycle can not be created" poped. The message no. is /TMWFLOW/CONFIG_UI017. Where can I release the project?
Thanks
Roger

Hi,
Pls click the check button(next to activate button)
see the SLG1 log generated remove the errors shown in red.
One it is done u press the refresh button & thn u cn create the task list
chk
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Regards
Prakhar

Error while creating task list

Hi All,
I am configuring change management , i have created project and assigned logical component for that when i create task list it gives below error .
For object /TMWFLOW/M , number range interval 01 does not exist
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
Transaction code:
I have already maintained number ranges.
Thanks
Santosh

Hi ,
Make sure you maintain the number range interval to be no. "01" and not "1" or anything else. I kept getting the "Error reading information for number range object /TMWFLOW/D" (and /M/ and /V) even though I had added the number range interval as described in the manual. As soon as I deleted the interval "1" and put it back with "01" that check passed and I could create a task list.
Thanks
Abullais

Problems while uploading Task List - Service Pack with LSMW

We are trying to upload General Maintenance Task List using LSMW. We are using Standard Batch/Direct Input method with Object 0490.
We need to upload task list header, operations, maintenance pack, component and service pack for operations.
We have created separate files containing data for different structures and they are linked using Group, group counter and operation number according below
Header
|----Operations
.......... |----Long Text
..........|----Maintenance Pack
..........|----Components
..........|----Service Pack
We have multiple operations per task list and multiple services per operation. The service pack is required only for a specific control key - PM03. As per the configuration this screen (PROGRAM - SPLMLSP, Screen Number - 0200) is accessible only when the value PM03 is entered in the operation. We are able to upload all other details except service pack details. We have tried using structure IBIPBDCD for the same.
While uploading the task list in foreground, when control key is entered as PM03 in an operation, service pack screen is displayed with error u201CNo batch input data for screen SAPLMLSP 0200u201D. The data provided in structure IBIPBDCD does not get processed at this time.
On exiting the screen using back button, the data in IBIPBDCD structure is passed incorrectly to fields in screen 3400 (SAPLCPDI)
Are we doing something incorrect? Is there a way to use this standard functionality to upload task lists with service packs?
Thanks
Edited by: jvalitp on Dec 15, 2011 12:46 PM

Hi,
When loading the tasklists you need to define a source structure as per the IBIP structure. You have different levels for example level 1 - header then below that level 2 - Operations, Header Long text then below that you have level 3 - Operation Long text, Operation Package assignments, operation component allocation.
For each of these levels you need an identifier that links then together. In your source file specify identifier 1 for header, Identifier 1 and Identifier 2 for operations, identifier 1 identifier 2 and identifier 3 for packages. This way the system can create the correct structure when it reads the data from the text file.
The identifiers are numeric and will dissapear once the files are loaded. specify then in the source structure as 2 characters and remember to set the xcel file up to have a 2 character field.
For the header file each line will be a new identifier 1,2,3,etc.
The operations are assigned to the header and have 2 identifiers. The first corresponds to the header identifier the next is a sequential number stating at 1 and incrementing for each line e.g Header 1 op 1, header 1 op 2, header 2 op 3, header 2 op 4, header 2 op 5 (this would be 2 header records. The first with 2 operations on it the second with 3 operations)
The package is assigned to the operation and as such needs to have a third identifier. Header (identifier 1), Operation (identifier 2), Package (identifier 3) Example Header 1 op 1 pack 1, header 1 op 2 pack 2, header 2 op 3 pack 3, header 2 op 4 pack 4, header 2 op 5 pack 5
I have a loading file for each of the items i.e. Header file, Operation file, maintenance package file. This is then assigned to the respective source structure.
Regards,
ravi

Task list component...

Similar Messages

Maybe you are looking for