Task notes do not get synchronized in Online mode

Greetings Internet!
  I've come across something odd with Outlook 2013 and was hoping for your wisdom.  When I create a task with notes on a mobile device (tested with WIndows phone 8.1 and iOS 8), the notes portion of the task will only sync with outlook (via Exchange
2013) if it's in cached exchange mode.  Now we have several users who log in using RDS, and Outlook is configured for online mode only.  When Outlook is in Online mode, the notes field of a task does not sync correctly.
  Any help would be appreciated.

It showed the notes in OWA, but still no joy in Outlook on our terminal server (in Online mode) after deleting and recreating the profile.
Also repeatable on my workstation when I change outlook from cached exchange mode to online mode.
Changes I make while in online mode sync back to the other devices, just not the other way around.
Very strange indeed.
Hi,
It seems that the Task notes can be viewed correctly in OWA but not in Outlook on your terminal server. Please check whether there is any mail related scanning or third-party add-ins in your Outlook client and local machine.
We can start Outlook in safe mode and change a computer without RDS to check whether the issue persists.
Additionally, please create the Task notes with Outlook client instead of using Mobile device. Then check whether the issue can be reproduced.
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

  • Not able to open rpd in online mode

    I am not able to open rpd in online mode.
    It just says that it opens in Read Only mode.
    The service is up and running. Still I get this problem.
    When the service is turned off and I try to open the rpd in offline mode too, it gives me the same problem.
    I am facing this issue even when the NQConfig.ini file is pointing to someother rpd.
    This issue is not with all the rpds in my Repository folder but only with few rpds. I have observed these probs with the latest two rpds each time.
    Can someone pls suggest me on this.
    Thanks,
    Swetha

    Yes.. so far the latest 2 rpds are not working.. (last two rpds that I have saved.. the older ones are working fine)

  • Firefox is stuck in Offline Mode-How do I get it in Online Mode

    I upgraded to Firefox 4 and cannot get any online pages. I am told to uncheck the Work Offline menu item. Where is this menu?

    Hi there,
    The ''Work Offline'' option may have accidentally been enabled. To check this, press the ''Alt ''key to temporarily turn on the ''Menu Bar'', click on the ''File ''menu, and make sure ''Work Offline'' is unchecked.
    Hope that is helpful.
    Mike

  • I get the message 'You are not connected to the internet.  Online functionality is not available'  But I am connected to the Internet

    I get the message'You are not connected to the internet.  Online functionality is not available'  I am connected so what can I do?

    Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset Network Settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - DId the iPod ever successfully connect to the network?
    - Does the iPod successfully connect to other networks?
    - Do other devices successfully connect with your network?

  • TS3376 i lost my ipod and its not conncected to the wifi at my house where i lost it,, how do i get it back online to find it?!?!?!

    i lost my ipod and its not conncected to the wifi at my house where i lost it,, how do i get it back online to find it?!?!?!

    Nothing you can do but physically look for it.  If it's offline it can't be tracked.

  • Why does my Ipod not synchronize all playlists? Some get synchronized, others don't. Yet there is enough space available.

    Why does my Ipod not synchronize all playlists? Some get synchronized, others don't. Yet there is enough available space.

    The S.I. prefix Giga is used to mean both 1000x1000x1000 and 1024x1024x1024. Computer software typically uses the second version, but using the first number makes the same number of bytes appear bigger when expressed as Gb, so is favoured by hard drive manufactures.
    80Gb10 = 74.3Gb2
    It's a bit like specifying a quantity in gallons without saying whether they are US or Imperial gallons - everybody gets the same volume but one number will be bigger than the other. I could offer you a tank with 10 Imperial gallons of fuel in it - but if I tell you it's 12 US gallons it sounds like you're getting more for your money.
    Once the total size of your library exceeds the capacity of your device all you need to do is create some size limited playlists to determine what goes on the device. Don't sync all movies, sync one or two that you plan to watch soon. Likewise with TV Shows. Limit podcasts to unplayed episodes and finally create a music subset. What worked for me for some time was a smart playlist called Steve's Tunes defined as Playlist is Music and Playlist is not Exclude where Exclude was regular playlist that I would manually add to until Steve's Tunes was small enough to fit. These days I run an iPhone and have a number of smart playlists with ? Gb of most played, ? Gb of highly rated, ? Gb of recently added, ? Gb of essentials, ? Gb of unplayed etc. Each time I sync I get slightly updated selection without having to put any extra effort in.
    tt2

  • Since one week my iphone, after synchronisation, gives me error message 13 objects could not get synchronized, look in itunes for more information. however, I dont find any info there

    since one week my iphone, after synchronisation, gives me error message "13 objects could not get synchronized, look in itunes for more information." however, I dont find any info there, neither on the mac I synch with nor on the iphone

    Launch Disk Utility in /Utilities. Then, click on the volumes under the top-level disk. The one that has this listed on the bottom is the boot volume.

  • TS2774 on my iphone, in Safari(not limited to) I get the message unable to connect to server,now the message says the internet is offline, how do I get it back online?

    On my Iphone4 3G, which I have upgraded to 6.0, and, have had many issues but this is my main concern: Everytime I go to Safari (or dif. sites) I get msge that reads "cannot connect to server", today it upgraded to "that msge plus this "the internet is offline". How do I get it back online?

    Wi-Fi, Cellular Data, or both?
    Do you actually pay for a data plan from your carrier?
    Are you in an area with a Wi-Fi hot spot to connect to?

  • Task rule resolution not working

    Hi Experts,
    I have a created a rule in PFAC to determine possible agents for a task. I have assigned the same under "default rules" tab  of task configuration. Rule container, binding between task container & rule container is also correct & in place properly. The rule standalone when tested (in simulation mode) does give the correct result. This possible agents determination is  to ensure workitems can only be forwarded to set of people(possible agents) who are authorized. So i have set the task attribute also to "General Forwarding not allowed". The corresponding step for this task has been assigned an agent as an "expression" , this expression contains a user "USXXXX" at runtime which is a part of possible agents for a task detemined by the rule as explained above . Still at runtime workflow is unable to detemine the agent for that particular workitem indicating that none of the responsible agent belong to the possible agent. When i checked in detail, i found the that the rule itself fails to get the possible agents at runtime as it showed no possible agents when the workflow log was checked. So that's why there is no common thing between responsible agent & possible agents or intersection of responsible agents & possible agents is nothing. So runtime workflow does not come to know the agent to whom the workitem to be sent to so it creates a workitem with "no agent".
    So kindly guide me why the rule resolution at task level is not happening properly.
    Regards,
    Chetan.

    Hi Chetan,
    My comments are below:
    1. I have an expression to determine an agent at step level ...this agent is a responsible agent.
    Ans. Correct.
    2. To a task corresponding to that step, i have assigned under "Default rules" tab an agent determination rule as default rule
    this rule i have created via PFAC. The list of uwer this rule gives i am considering as "Possible Agents".
    Ans. Incorrect... this is again "Responsible Agent"
    3. The Responsible agent determined by the expression at runtime is the user that is part of list of users determined by the rule
    assigned at task level.
    Ans. No, Resposible Agent is only what is determined by rule or  is a expression. However the agents who receive work item is the intersection of Possible and ResponsibleAgent.
    4. Task attribute is set to "General Forwarding not allowed" to ensure that workitem can only be forwarded to those user
    that rule determines as mentioned in step2 & not to any XYZ user.
    Ans. "General Forarding not allowed" only allows to forward work item to Possible Agents.
    Hope this helps you...
    Regards
    Gautam

  • HT204053 In iCloud setup my apple I'd is not accepting. Getting error message it should be  an email I'd, but my my apple Id is just in user I'd form? Please support.

    In iCloud setup my apple I'd is not accepting. Getting error message it should be  an email I'd, but my my apple Id is just in user I'd form? Please support.

    I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
    So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
    Thank you for any help you can give.
    Trish

  • Open Task Button does not come in Outlook

    I have a three level approval workflow in which each level an email is generated to the approve to approve or reject.
    But suddenly the Open Task Button does not pop up in Outlook 2010 anymore can you tell me why?
    Srinivasan Kidambi

    had the same issue with External users not using Outlook. This is how I fixed it:
    Open the task list that the workflow is using and connect it to Outlook. Then kick off a workflow to make a new task. Once the task is made open the task from Outlook. The bottom options (review, perform the specific req. for the task, and Open this task)
    are now links. Hover your mouse over the link and you will see the address.
    Now open SPD, connect to your site and open the work flow assc. to the doc lib.
    Start editing the workflow and click the "Approval" link
    Click "Change the behavior of a single task"
    You are going to have to look for all the instances of "then e-mail task notification to "Current Task:Assigned to"
    Open "Current Task:Assigned to"
    Click where you want he link to go and hit the Hyperlink button
    name the link whatever you want, then hit the string builder ("..." button)
    Copy the link from the Task in Outlook into the string builder (if you use External addressing you can also hard code the External address).
    At the very end of the link where is says ID=(then a number) delete the number and DO NOT put a space. Click the Add or Change Lookup button and use "Current Task: Approval" "ID" "As String" and click ok. Should like this:
    Now this will not pop the form up, but it will send the user straight to the task form (might have to enter username and password) for the correct task. Remember to do this to all the "Current Task:Assigned to" in the workflow. It sounds like a chuck of
    work but it does not really take thaty long on the OOTB Approval workflow.
    Just wanted wanted to add my two cents.
    Also check
    http://social.technet.microsoft.com/Forums/en-US/417466a3-cdcb-4559-8453-9fff6da4aceb/getting-around-a-missing-open-this-task-button-in-a-nonoutlook-email?forum=sharepointcustomizationprevious
    If this helped you resolve your issue, please mark it Answered

  • Firefox will not let me get on any websites (safe AND not safe), claiming that it "may pose a security threat to your system"; when I try to choose the "proceed unprotected" option, it won't let me.

    My computer's anti-virus software recently expired. A few days later, I went to download a new anti-virus software . . . when I opened up Firefox, I received a warning that claimed Firefox was infected with "Trojan-BNK.Win32.Keylogger.gen", and gave me two options: "Activate XP Security 2011 (recommended)" (this was a $60 charge and required credit card info) or "Continue unprotected (Dangerous)"
    Since I needed to install new anti-virus, I figured I would continue unprotected, download my new software quickly, and remove the virus. But when Firefox opened, it gave me a message saying: "Firefox alert. Visiting this site may pose a security threat to your system!". Gave me three options:
    1. "Get a copy of 'XP Security 2011' to safeguard your PC while surfing the web (RECOMMENDED)"
    2. "Run a spyware, virus and malware scan" (I already did this)
    3. "Continue surfing without any security measures (DANGEROUS)"
    I tried clicking on different links, but the same warning kept showing up, even on verified and safe sites. I tried to choose the third option so that I could download my anti-virus software quickly, but nothing happened when I clicked on it - the page reloads and the warning shows up again.
    My computer is still without anti-virus software because Firefox will not let me surf the internet. Please help!

    It sounds as though your PC is infected with fake antivirus software. The detailed cleanup instructions vary depending on which fake AV you have. However, as a first step, try this:
    Download the following on a different PC, copy them to a USB flash drive or CD, and then run them on the infected PC:
    Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
    SUPERAntiSpyware : http://www.superantispyware.com/
    Hopefully these will get you back online safely. If not, search for clean-up instructions for the specific malware.

  • Error submitting tasks: Operation could not be completed within the specified time

    I've created a Batch Application and I'm having an issue running a job.  Its suppose to synchronize 2 azure blob containers.
    In my JobSplitter, I compare 2 azure blob containers and find the files in the first container that need to be copied over to the second one.  Just figuring out which files to copy over can take about 5 to 6 minutes the first time this is run depending
    on the number of files that need to get copied over.
    Once we have the files that need to be copied, we group them into sets and create a task for each set.
    The exe that the TaskProcessor runs doesn't do anything just yet. All it does is write the arguments sent to it into a file. Nothing major.
    On the last run, about 900 tasks were created. Four of the tasks completed successfully. I can download the output files for them just fine. The next 4 tasks failed with an error.
    Looking in the JobLogs, I see this:
    The job orchestrator finished
    Failed to process job ac8dd4a3-d882-4ec1-847d-48844fa3e1f4: Error submitting tasks: Operation could not be completed
    within the specified time. RequestId:27eab612-c8ce-4e4b-8dfb-00e7024c71ec Time:2015-01-29T00:37:03.5943898Z
    Has anyone seen this before?
    Thanks,
    matt

    This error is usually a transient error, typically related to an internal storage timeout.  We're working on a fix for it.
    In the meantime, if you go into the Batch Apps portal, select the failed job and click Reprocess in the command bar, Batch Apps should re-run the failed tasks and the not-run tasks.  (Note that the tasks that already succeeded will not be re-run, and
    we will not re-run the job splitter to create new tasks.)
    Please let us know if you continue to see this problem or if reprocessing the job doesn't work for you.

  • HELP!!!!  My iPOD when trying to sign in to GAMES it says You are not connected to the Internet.  Online functionality is not available.  What's wrong?    HELP US!!!!!!!!!!!

    HELP!!!!  My iPOD when trying to sign in to GAMES it says You are not connected to the Internet.  Online functionality is not available.  HELP!!!!!!!!!!!!!!!!!!

    We (my son and me)  Setting's we changed to GOOGLE like you said.  Listen, we are new tothis and trying very hard to get it to operate.  Had it since last Wednesday and still trying to get it to operate.  I know it will take time, but it VERY upsetting. 

  • R1: tcAPIException: Duplicate schedule item for a task that does not allow multiples.

    Hi,
    I'm struggling with the following task:
    I have to assure an account exists for a given resource. I do provision it with the .tcUserOperationsIntf.provisionObject().
    I've created a createUser task to create the account.
    The task code checks if there is already matching account.
    If no account exists, is is created in the disabled state, and the object state of OIM account is set to 'Disabled' by means of task return code mapping.
    If it exists, it is 'linked' to OIM account.
    The problem is if the existing account is enabled, I have to change the OIM account state to 'Enabled' either.
    To implement this (thanks, Kevin Pinski https://forums.oracle.com/thread/2564011 )) I've created an additional task 'Switch Enable' which is triggered by a special task return code. This task always succeeds, and its only side effect is switching the object status to 'Enabled'.
    By I've getting the 'Duplicate schedule item for a task that does not allow multiples' exception constantly:
    This is the stack trace:
    Thor.API.Exceptions.tcAPIException: Duplicate schedule item for a task that does not allow multiples.\
      at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(tcUserOperationsBean.java:2925)\
      at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(tcUserOperationsBean.java:2666)\
      at Thor.API.Operations.tcUserOperationsIntfEJB.provisionObjectx(Unknown Source)\
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)\
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)\
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)\
      at java.lang.reflect.Method.invoke(Method.java:601)\
      at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)\
      at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)\
      at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)\
      ...skipped
      at Thor.API.Operations.tcUserOperationsIntfDelegate.provisionObject(Unknown Source)\
      ... skipped
    What did I wrong?
    Regards,
    Vladimir

    Hi Vladimir,
    Please select 'Allow Multiple Instance' checkbox for the process task.
    Thanks,
    Pallavi

Maybe you are looking for