Task Scheduler doesn't work for restarting the server but event log says successful.

Hi All,
I have created a scheduler task to run every weekend to restart the Windows Server 2008 R2 Standard(64 Bit OS). The task everything has been successfully created. I check manually if it actually restarts but it doesn't but on the event
logs of the Task Scheduler it says restarted successfully and returns status code 0. But it doesn't seem to work.
Thanks in advance.

Hi Prasad Venkatesan,
Can you tell more detailed information about how do you set this scheduled task?
To create a scheduler of restarting at specific time, please also try these steps:
Press WinKey+R > type taskschd.msc and press Enter (it will launch Task Scheduler)
Left click from the right pane on the Task Scheduler Library > open Action from the top menu > New Folder... > name it MyTasks
> click OK
Left click on the MyTasks > choose Action from menu > Create Basic Task... (it will open task wizard)
You can enter the Name , for example "Restart", and press Next
In Trigger section you can specify when you want to run your task, for example:
Select Daily , and press Next
Now you can specify the day, the hour and set to recur every day, after that press Next
In Action section you can choose what you want to run, for example restart your system, to do this:
choose Start a program , and press Next
in the Program/script field type shutdown /r , and press Next
please press Finish
Then check if it can work.
Best Regards,
Anna

Similar Messages

Receiver determination doesn't work for same IDoc type but in differentSWCV

hi guys,
we have an emergency now. Receiver determination doesn't work for same IDoc type but in different SWCV.Please check below for detail.
1. The process flow is : R/3 IDoc -> XI -> Third party system
2. In previous release R13, IDoc ORDERS05 was imported and used in XI and software component version is R13. And receiver determination was created.
3. Now, in new release R17, IDoc ORDERS05 was imported from R/3 to XI again and software component version is R17. And in R17, the receiver determination created in R13 was used for both old interface(R13) and new interface in R17.
Then we encountered the problem, both interfaces doesn't work now, even we deleted the receiver condition(In R13, IDoc ORDERS05 was sent to system A, and in R17 IDoc ORDERS05 was sent to system B, RCVPRN was used as an condition).
Does anyone encounter this problem? really need and appreciate your help.
-Eddie

information from monitor:
Status Sender Service Sender Namespace Sender Interface
reschedul XXXCLNT100 urn:sap-com:document:sap:idoc:messages ORDRSP.ORDERS05
columns for "Receiver Service","Receiver Namespace", "Receiver Interface" are blank
And then double click records in monitor, go into detail information...
Normally there's lots of setps existed, such as
Inbound Message ( CENTRAL )
Receiver Identification
Interface Determination
Receiver Grouping
Message Branch According to Receiver List
Technical Routing
Call Adapter
But now there's only one setp -
"Inbound Message ( CENTRAL )" existed, no any another setp..., and payload in inbound message looks good.
And in SMQ2, I checked the queue information, found there's an error - "An exception occurred that was not caught." No any other detail information for this error.

Task Scheduler doesn't work

Slightly leading title. It does work when you set the tasks up and works fine for a while. Then all the tasks begin failing at some random point.
I have several small EXEs and a piece of kit called SyncBackup in the server. These are the tasks to be executed.
Sticking with the EXEs I built myself which are .NET apps, these are lightweight apps which connect to a database and write to a log file.
RDP in as Administrator and double-click the EXE - runs fine.
Set up a Scheduled Task to run it every 5 minutes - fine. Right click, run task - executes perfectly. Job complete, last run status fine.
Go away and leave the server for a few days - runs fine.
Then it just stops working with code 0xC0000142. For every single Scheduled Task. Except one which I think returns 0xC01.
Task History shows "Action completed" and "Task Completed" as if it's all working perfectly. But it isn't. No errors logged or evident there.
I have these all set up to run as the Administrator for testing purposes.
Why do these tasks run fine when set up and break "behind your back" at some later stage? What does this error code mean? How do I get these working and importantly, *stay working*?
I've seen stacks of threads like this with no resolution. A common issue appears to be the Start In directory specification.
It doesn't make any difference whether you specify the Start in directory or not. There are no spaces in the file names or paths anyway so quote marks irrelevant.
And, these tasks do work initially - they just break later on.
I've come across a piece of third party kit which emulates what the Windows Task Scheduler does and am tempted to install and use that instead.
But the Windows Task Scheduler always used to work... ;)

I was waiting until this evening to see if restarting the server would fix this.
And it has.
All the tasks work perfectly - those failing with both the error codes, so that's my own apps and also the SyncBackup tasks.
For now...
Digging around some more, I'm led to believe this might have something to do with "Desktop Heap" size.
http://blogs.msdn.com/b/ntdebugging/archive/2007/01/04/desktop-heap-overview.aspx
Thing is, this never used to happen up until very recently on one of my servers, I migrated to a new one (not because of this) mystified by the problem and hoping the problem would vanish. And it did, at first.
One other server I have which runs SyncBackup tasks doesn't have this issue.
All Windows Server 2008 R2 and all up to date with hotfixes.
I'm reluctant to modify the Desktop Heap size without a more detailed understanding and still mystified as to why this all worked perfectly until about three weeks ago.

Email intermittently says it can't connect to the server but connection doctor says I'm connected

I have both my Yahoo and work email accounts on my MacBook Pro. Intermittently, my work email refuses to send, giving me the error message that it can't connect to the server. Connection doctor says work email is connected to the internet, and some emails will go while others won't. Have checked server settings agains my Iphone, and they are identical. No problem emailing from the phone. Help?

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

InvocationService.query() doesn't work for restarted cluster member.

Hi,
Thank you guys for that product, I'm very pleasured with Coherence cache.
I will try to describe the following problem with Coherence.
Our product integrated with Coherence cache and we have discovery/communication mechanism based on
- MemberListener - to get events about cluster member;
- InvocationService.query() - to communicate with remote member.
I see that when node disconnected (wire break) MemberListener works fine. And after connection repaired sometimes cluster services on node stopped or restarted.
I tested with 2 cluster islands and push/pull wire in my network router (2 coherence members on one side and 2 members on another side). Try to repair connection and see how cache merged.
If node cluster services restarted I see that Member.getUid() changed for local member and MemberListener works fine for all nodes. But remote nodes can't send anything with InvocationService.query() to that restarted member!!!
InvocationService.query() always return empty result when I try to send my AbstractInvocable to these restarted members in cluster.
Could you help?
I think there is bug...
Best,
Alex

user4366011 wrote:
Hi,
Thank you guys for that product, I'm very pleasured with Coherence cache.
I will try to describe the following problem with Coherence.
Our product integrated with Coherence cache and we have discovery/communication mechanism based on
- MemberListener - to get events about cluster member;
- InvocationService.query() - to communicate with remote member.
I see that when node disconnected (wire break) MemberListener works fine. And after connection repaired sometimes cluster services on node stopped or restarted.
I tested with 2 cluster islands and push/pull wire in my network router (2 coherence members on one side and 2 members on another side). Try to repair connection and see how cache merged.
If node cluster services restarted I see that Member.getUid() changed for local member and MemberListener works fine for all nodes. But remote nodes can't send anything with InvocationService.query() to that restarted member!!!
InvocationService.query() always return empty result when I try to send my AbstractInvocable to these restarted members in cluster.
Could you help?
I think there is bug...
Best,
AlexHi Alex,
could you please post your cache configuration file? Also, is the invocation service marked to be autostarted in the config file?
Best regards,
Robert

I work for Lionbridge Inc, and am having trouble seeing the mobile landing page format. They said it doesn't work for firefox 4.0 but it does for firefox 3.6. How do I know which program I'm in and how do I change it to 3.6?have

I do internet website rating and when I try to rate a mobile page, I first go to tools, then to mobile plugins, then put mark by mobile plugins. But when I go to the mobile page, it doesn't disply the page like you would see on your phone. I have to scroll to the right or left to see the whole page. I have downloaded the mobile downloads several times. My co. said I need firefox 3.6 because 4 won't work. How can I tell which version I have and how do I download 3.6? Thank you, Sandy Whittington

I do internet website rating and when I try to rate a mobile page, I first go to tools, then to mobile plugins, then put mark by mobile plugins. But when I go to the mobile page, it doesn't disply the page like you would see on your phone. I have to scroll to the right or left to see the whole page. I have downloaded the mobile downloads several times. My co. said I need firefox 3.6 because 4 won't work. How can I tell which version I have and how do I download 3.6? Thank you, Sandy Whittington

OUTLOOK 2013 permission shared calendar Free/Busy doesn't work for some the users Exchange 2010 and Exchange 2003 that use outlook 2007/2010

Hello,
We are in coexitence organisation (transition Migration) Exchange 2003 sp2 and Exchange 2010 sp1.
Users in Exchange 2003 use outlook 2007 and outlook 2010
Users in Exchange 2010 use outlook 2007, outlook 2010 and outlook 2013.
Issue: users in Exchange 2003 can't open outlook 2013 user calendar when he has Busy/Free information as default permission in his calendar.
User in Exchange 2010 with outlook 2007 can't also open outlook 2013 user calendar when he has Busy/Free information as default permission in his calendar.
Is it normal ? or exist some configurations to do in order to coexist all thoses clients and servers ?
Thanks in advance

Hi,
Does this issue occur on Outlook only or both Outlook and OWA?
Since you have double checked the permissions via multiple methods, it seems there is nothing problem on permission. Please make sure the migration from Exchange 2003 server completed successfully.
If in OWA everything goes well (cannot see details), it should be an issue on the Outlook client side.
I suggest run Outlook under safe mode to avoid some AVs and add-ins.
I suggest re-create profile to refresh the caches.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Task Scheduling Script - Need help with passing the scheduled command (variables are not being evaluated)

Hi Everyone,
I'm trying to get a simple task scheduler script to work for me and can't get the command I need passed to the scheduler to evaluate properly.
Here's the script:
###Create a new task running $Command and execute it Daily at 6am.
$TaskName = Read-Host 'What would you like this job to be named?'
$Proto = Read-Host 'What is the protocol? (FTP/FTPS/SFTP)'
$User = Read-Host 'What is the user name?'
$Pwd = Read-Host 'What is the password?'
$Server = Read-Host 'What is the server address?'
$NetworkDir = Read-Host 'Please input the network location of the file(s) you wish to send. Refer to documentation for more details.'
$RemoteDir = Read-Host 'Please input the REMOTE directory to which you will upload your files. If there is none please input a slash'
$Command = 'winscp.com /command "option batch abort" "option confirm off" "open $Proto://$User:$Pwd@$Server" "put $NetworkDir $RemoteDir" "exit"'
$TaskAction = New-ScheduledTaskAction -Execute "$Command"
$TaskTrigger = New-ScheduledTaskTrigger -Daily -At 6am
Register-ScheduledTask -Action $TaskAction -Trigger $Tasktrigger -TaskName "$TaskName" -User "Administrator" -RunLevel Highest
Write-Host "$TaskName created to run Daily at $TaskStartTime"
What's messing up is the $Command creation, the command needs to have the quotes around "option blah blah", but if I wrap the whole line in single quotes the variables that are evaluated for the "open blah blah" strings (which also need
to be inside quotes) and the "put blah blah" string are not being evaluated properly.
I've dorked about with different bracketing and quoting but can't nail the syntax down, could someone point me in the right direction? My Google-fu seems to be lacking when it comes to nailing down this issue.
Thanks

Hmmn, closer. I'm getting this error now:
+ $Command = $tmpl -f $User, $Pwd, $Server, $NetworkDir, $RemoteDir
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (winscp.com /com...t {4} {5}" exit:String) [], RuntimeException
+ FullyQualifiedErrorId : FormatError
And the command being added to the new task looks like this:
winscp.com /command "option batch abort" "option confirm off" "open ($Proto)://($User):($Pwd)@($Server)" "put $NetworkDir $RemoteDir" "exit"
Here's the current state of the script. I get what you're doing to try to bypass the quotes issue, using an array. I'm just not awesome at this yet sooooooo...
$TaskName = Read-Host 'What would you like this job to be named?'
$Proto = Read-Host 'What is the protocol? (FTP/FTPS/SFTP)'
$User = Read-Host 'What is the user name?'
$Pwd = Read-Host 'What is the password?'
$Server = Read-Host 'What is the server address?'
$NetworkDir = Read-Host 'Please input the network location of the file(s) you wish to send. Refer to documentation for more details.'
$RemoteDir = Read-Host 'Please input the REMOTE directory to which you will upload your files. If there is none please input a slash'
$tmpl = 'winscp.com /command "option batch abort" "option confirm off" "open {0}://{1}:{2}@{3}" "put {4} {5}" exit'
$Command = $tmpl -f $User, $Pwd, $Server, $NetworkDir, $RemoteDir
$TaskAction = New-ScheduledTaskAction -Execute $Command
$TaskTrigger = New-ScheduledTaskTrigger -Daily -At 6am
Register-ScheduledTask -Action $TaskAction -Trigger $Tasktrigger -TaskName "$TaskName" -User "Administrator" -RunLevel Highest
Write-Host "$TaskName created to run Daily at $TaskStartTime"

[kde] "Only show tasks from the current desktop" doesn't work for max

Hi,
I have two monitor setup (laptop + main monitor) and I would love to use "Only show tasks from the current desktop" option in KDE Task Manager but for some strange reason it doesn't work for me. Well, it works but only partially - for restored/unmaximized windows. When I maximize one it appears on the Taskbar on both screens. Is this normal? May it be due to the fact that I've placed Taskbar on top of the screens?

Did you miss this bit
"Graphics : 1 GB NVIDIA Quadro 600 (1DP & 1DVI-I) (1DP-DVI & 1DVI-VGA adapter) (ELGA13) 1"
And the final image clearly states the type of Graphics Card he has
Photoshop CS6 GPU FAQ
Tested video cards for Photoshop CS6
Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. The minimum amount of RAM supported on video cards for Photoshop CS6 is 256 MB. Photoshop 13.1 cannot display 3D features if you have less than 512 MB of VRAM on your video card.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2012, you can assume that the card will work with Photoshop CS6.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500, 600 series
nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows & Mac OS)

Application Restart and Recovery APIs doesn't work for windows services

I am using the Application Restart and Recovery mechanism (provided in Windows API Code Pack for Microsoft.NET Framework) to collect some information (i.e. stack information when there's an unhandledexception) before my windows service crash down.
It works well for windows form applications, but the callback method wouldn't be called if the host is a windows service.
I have checked the article: https://msdn.microsoft.com/zh-cn/subscriptions/downloads/cc303708
But it doesn't specify clearly whether it works for a windows service. It seems that the recovery will only be activated when the user interacts with the error dialog of Windows Error Reporting (clicking "close" on the dialog, for example).
So I am wondering is my guess right that the Application Restart and Recovery mechanism doesn't work for windows services. Or is there a better way to meet my requirement?

I would suggest trying ARR if that's what you want to use. The restart portion won't work, but it doesn't need to as if you fail out of your service, the Windows service controller will handle recovery (up to and including restarting your service).
You configure those recovery actions either through code or one of the built in administrative tools for services such as services.msc.
DebugDiag/ADplus and similar tools ultimately do use built-in APIs; you don't need to add anything external to collect debugging information. You do however have to write a good deal of code to do somethings. It's pretty simple to use the unmanaged
function that I pointed out before and
MiniDumpWriteDump to write a minidump when you hit an unexpected error(the dbghelp.dll that comes installed with Windows has it so you don't need anything additional installed). You can even write a basic debugger that literally debugs a process using
only kernel32 functions (see
https://msdn.microsoft.com/en-us/library/windows/desktop/ms679301(v=vs.85).aspx if you're interested).
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

HT2404 I'm trying to update apps and download new ones on mi ipad, but it doesn't work... the icons say "waiting" and nothing happens for days!

I'm trying to update apps and download new ones on mi ipad, but it doesn't work... the icons say "waiting" and nothing happens for days!Help!

Here are a bunch of things that you can try to get the downloads to resume.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

I have an Ipad My apple ID and password works for Ibooks and Icloud but when I try to get into the app store it doesn't show my entire email address on the account. When I try to get into the app store it tells me my password is incorrect. How can I corr

I have an Ipad My apple ID and password works for Ibooks and Icloud but when I try to get into the app store it doesn't show my entire email address on the account. When I try to get into the app store it tells me my password is incorrect. How can I correct this? I have been emailing support but so far they have been no help

Open the App Store app, go to the Featured pane, swipe to the bottom, tap the Apple ID and sign out. Tap again and sign in with the Apple ID of your choosing.

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Task Scheduler doesn't work for restarting the server but event log says successful.

Similar Messages

Maybe you are looking for