Task status is not changed in UWL

Task status is not changing when it is executed in UWL. the tasks comes from R/3 when a workflow is executed . SAP says realtime refresh not supportinng in current version of UWL. please let me know any workaround to solve this issue.
Thanks ,
Sarath

Hi,
Unfortuntely, there does not seem to be a 'working' workaround for the issue.
This is resolved however in SAP Netweaver 7.0 EhP2 or 7.20 versions.
Please see /thread/1564782 [original link is broken]
Regards,
Srikishan

Similar Messages

Task status not changing in UWL

Task status is not changed in UWL when the task is executed from UWL . workitems transfered from R/3 by executing a workflow .SAP says real time refresh not supports in this UWL version.
please let me know any workaround to solve this issue.
Thanks
Sarath

thats right.
UWL does not refresh immediately. You need to refresh the UWL again.
As I saw over internet, the Real-time Refresh feature for Universal Worklist is available in SAP NetWeaver 702 SP02 and above, and SAP NetWeaver CE 7.20 SP01 and above.
Thanks
Krishna

Production order status was not changed to 'CNF' after final confirmation.

Hi guru.
I experienced very special case that production order status was not changed to CNF after final confirmation.
I did final confirmation and canceled confirmation. (CNF -> REL)
And I did final confirmation again because of fixing activity quantity.
the strange thing is that production order status wasn't changed from REL to CNF.
I did confirmation again with 0 activity, thereby I solved this problem
BUT i don't know why this case happened.
Please, explain the reason.
Thanks.

Hi,
As per my observation, their is not any change in the status of the order REL with confirmation CNF, instead of this, it has change from CRTD & then to TECO.
Sequence of the status of the order as below
1) CRTD MANC NMAT SETC
2) REL NMAT SETC - Changes from CRTD to REL after releasing of the order
3) REL CNF PRC CSER ERTR OPGN SETC - After confirmation, it updated after the order REL status.
Rgd,
Chetan

Sharepoint Designer - Two step List Workflow task item is not changing the status from not started to Complete

Hi
Using SPD i am creating list workflow.
Scenario: Employee submits a request . Task assign to manager. Manager can either approve/ reject. If approve then change the state column to "done". If rejected the state column to "Rejected".
Problem is "Assign a to do item" is assigning the task to manager. But after manager approves the status in the task list not changed to "Completed". Still it is showing "Not started". I dont want to manually complete the task.
Please help me for automatic process.
What i should do to change the status to "Complete" automatically after manager approval
Regards
Jhanani
Janani.R

Hi Janani,
From your description, you would like to create an approval workflow for a list. When an employee submit a request to the list, an approval task should be assigned to manager, then manager could approve or reject the request. From the request list,
we should be able to see the Approval task’s status.
Not understand the reason of designing the workflow to two steps, an approval action should be enough from my understanding. For producing, I create a list named Request list, then customize it in InfoPath form to add a Request field for stating request
content. Then add a workflow to list named Approval task, add the action of Start an approval process with administrator and make the workflow automatically start when item is added.
The image below shows the status of Adding items, Approving and Rejecting. Please check if it could meet your requirement.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Approved Task items are not disappearing from uwl task list

Hi
we have implemended Guided procedures with universal work list. For most of the users, once the any task items are approved, it suppose to disappear from the task list. But it is not disappearing from the task list. Even if i click on "refresh" under flter option. Please let me now how to get rid of this issue.
thanks
vijay

Hi,
Have a look on my reply on the thread:
Uwl tasks status not get updated in Portal
Regards,
Fabio

Log version status does not change

Hi,
For a synchronous scenario, I'm getting the status as 'Log Version' in sxmb_moni and the status doesnot change at all. Can you please let me know the reason for this and how the message status can be changed to successful.
Thanks
Sreenivas

HI,
This already explained in above note please do accordingly..
See below..
Symptom
Synchronous messages with message status 001 were made persistent in the database. This can occur, for example, when synchronous messages are being logged. These messages are not deleted by the Delete job.
Other terms
Delete, synchronous messages, message status
Reason and Prerequisites
You use the SAP NetWeaver Exchange Infrastructure.
Solution
Implement the attached correction instructions or import the Support Package listed below.
See the note.. for more details..
Note 930181 - Deletion of synchronous messages with message status 001.
Also see the note
Note 820149 - Deletion of manually changed and terminated messages
Also see the below threads
sxmb_moni, table sxmspmast, Messages with ICON_LED_RED, report RSXMB_SELECT
SXMB_MONI: LogVersion
Points rewarded if it is useful....
Regards
Chilla..

Control Flow task colors are not changing in SSIS

Hi,
When I am running my SSIS package colors of "Control Flow" task are not changing from Yellow to Green or Yellow to Red however when I double click on dataflow task I found that colors are getting change for the components available inside dataflow
task. This mean only colors of my control flow task are not changing.
Can anyone help me with this issue. Because of this issue I am not able to find out whether any of my control flow task is running successfully or not espicially in case of "Execute SQL Task"
Thanks

Related thread:
http://stackoverflow.com/questions/9473121/yellow-on-the-control-flow-no-color-within-the-data-flow-whats-going-on
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Release Status Code not changing

Hi experts,
     There is a button "Released" on CustomerInvoiceRequestQAF. After released, the new invoice that I have created should be released.
     But I check the released status code in CustomerInvoice.xbo's BeforeSaveEvent and the status is still not changing. It still shows "Not Released".
The steps when I press Release on CustomerInvoiceRequestQAF.
1.CustomerInvoice.xbo's BeforeSave (because I have written some code there)
     this.Status.ReleasedStatusCode is still "1" meaning "Not Released". It should be "3" (Released)
2.CustomerInvoiceRequest.xbo's BeforeSave
     this.Status.LifeCycleCode is still "1" meaning "Not Released".It should be "2" (Released).
When I press Release on CustomerInvoiceQAF. The status is changed to Released.
Thanks in advance.
Regards,
Fred.

Hi, Horst,
     Thanks,
     This case involves 2 standard BOs. CustomerInvoiceRequest and CustomerInvoice.
     CustomerInoivceRequestQAF--->Save     -->Invoice Requests (CustomerInvoiceRequestOWL)
      I can release the invoice directly here.
     CustomerInvoiceRequestQAF-->Release -->Invoice Documents (CustomerInoivceOWL)
     OR
    I can release the invoice this way. First "Save as Invoice", and Then "Release" it in Invoice      Documents.
      CustomerInoivceRequestQAF--->Save As Invoice -->CustomerInvoiceQAF(with a status "Not      Released")
     CustomerInvoiceQAF--> Release -->Invoice Documents(with a status "Released")
     The second case works fine. In the first case, the release status code doesn't change to "Released".
Regards,
Fred.

Leave Request Task TS12300097: Status is not changed

Hi All! maybe you have some idea ...
For the ESS version Leave Request, we are using a copy of standard workflow WS12300111.
When applying leave, the workflow template is triggered and processed to task TS12300097. In this task, we use customized rule to find agent.
In Universal Worklist, we can do the approval process and after approved, the leave requests status is changed. But the problem is the approval task is still in the UWL, status is still new and the workflow template gets stuck at this step.
The description of TS12300097 said: Once you have processed the request, the work item will automatically be set to "completed." automatically be set to "completed."
And we can not find out why our leave request is not behave like that. Please kindly advise the possible reason.
Thanks a lot!

Hi All! maybe you have some idea ...
For the ESS version Leave Request, we are using a copy of standard workflow WS12300111.
When applying leave, the workflow template is triggered and processed to task TS12300097. In this task, we use customized rule to find agent.
In Universal Worklist, we can do the approval process and after approved, the leave requests status is changed. But the problem is the approval task is still in the UWL, status is still new and the workflow template gets stuck at this step.
The description of TS12300097 said: Once you have processed the request, the work item will automatically be set to "completed." automatically be set to "completed."
And we can not find out why our leave request is not behave like that. Please kindly advise the possible reason.
Thanks a lot!

New GP Task Items do not appear in UWL after clear item cache of GP System

HI, SDN Expert.
After I made some minor change in the GP configuration xml (changing the "createdate" format from "date" to "datetime"), I went to the Cache Administration Page to clear the item cache of my GPSystem. I went to register the item types for all system in the UWL Configuration Page.
After clearing the cache and register the item types, I started initiate some GP tasks, but now all the GP tasks are not appearing in the UWL any more.
I remembered last time the same thing has happened, but the GP tasks started appearing only after a few hours.
Now, it has been two hours wait, I still don't see my GP tasks re-appear.
I wonder any of you know whether this situation is normal? What is the root cause for this situation? And how do I fix this?
Thanks for advise,
KC

Issue resolved.

Stored procedure if duty status is not changed in the sales order

Dear Experts,
I need one SP -
My scenario is the duty status in sales quotation i have selected is 'without payment of duty ' by default.When i am copying the same to sales order by default it will pick up 'without payment of duty ',but i want to change it to with payment of duty if the user is again trying to change it to ' without payment of duty ' than system should not allow to add the document.
Mona.

Dear Mona,
This forum is for DRQ to post your requirement for future B1 development. Please post your questions on the main forum.
Thanks,
Gordon

Work flow status is not changing

Hi,
The work flow is not ending. The last approver is getting the item in his inbox repeatedly though he has approved it previously and the workflow status is showing as still in progress.
Please kindly help me to solve this
Regards,
Sekhar.

Hi Chandrashekar,
When we create w work item in the workflow, we specify the thing we want to perform in it.When the task is perform we need to set the event for the end task.Event can be repoting higher autority , a mail or something.After we set a task or work process we need to handle the end manuallly.It never gets terminated itself but we have to terminate it manually.Even if you are sending the approval from the user after task completion and you must have ended the procedure.Now as the last task is not handeled properly.That is executing in endless loop.So you may go for termination of workprocess after the last mail.If you have used loop untill please use container with it.It will be helpfule.Hope your query resolves soon.
Have a best day ahead.

Wait for Session Data status does not change in EWA

The hour glass next to the early watch alert in the solution manager system has the status "wait for session data". The SDCCN in the satellite system has the RFC configured correctly and the RFC is working fine when tested. I have installed the latest ST-PI and ST-A/PI for my basis release 640 on the satellite system. The basis release of the solution manager is 701. The self diagnosis button in solution manager does not list any errors or warnings for that satellite system.
There are no errors in the task Refresh Session task in the satellite system's SDCCN:
Refresh of session overview started from destination SM_R3SCLNT001_BACK
> Sessions are up to date
Refresh of session overview completed from destination SM_R3SCLNT001_BACK
Any ideas why I can't generate the EWA in the solution manager system?

Hello, I've got the same problem, went through the note, but it didn't solve my problem.
Here I can say, that several points from the note are NOT clear (typically SAP...):
I am falling in the category with ST-PI ... or newer.
- SDCCN:
Delete any task 'Maintenance Package' in the 'To do' tab.
Ensure that no connection to SAP is maintained in:
SDCCN-> Goto -> Settings -> Task specific -> RFC destinations.
<so I deleted all the RFCs in that location>
Ensure that connection 'NONE' is maintained, and that the 'master' flag is set.
<surprisingly, now there is a connection that has to be maintained!! Also the 'master' flag is always grayed out for me and never clickable!!>
Create a new periodic task 'Maintenance Package'.
<Not working, until I added back my SM_<SID>CLNT<No>_BACK connection>
- Step 2:
Re-import the service definitions, c)
They are saying how to setup the destinations, but NOT how to import the service definitions!
So, not really sure how to interpret and apply the note... Please help! The satellite system is NetWeaver 7.3 EHP1, Solution Manager 7.1 SPS10.
It goes on... I found this link:
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=0CDMQFjAB&url=http%3A%2F%2Fwiki.scn.sa…
With it, I could transfer the data to the solution manager, but I can only see 'Data is available', when I click it and tell it to start the job, SM:EXEC SERVICES 000000000400100 runs for 6-7 seconds and completes successfully, though the EWA report still says 'Data is available', but no report is being generated. I also re-executed the job SM:EXEC SERVICES and still nothing.

Header status is not changing in sales order

Hi,
I have done sales order, and released pick as well after that confirmed shipment also. And I have runned workflow background process for om:lines and om:headers also. But now the problem is after these steps the line level status is closed but the header level status is showing booked only. Please anyone help me to solve this issue.

Hello,
Header will close in last day of the month.
Look also at Sales Order Header Does Not Close After ALL Lines Have Closed [ID 133837.1]
Regards,
Luko
Edited by: Luko on 2011-10-27 08:47
Edited by: Luko on 2011-10-27 08:47

After importing the transport request status is not changing to imported

Hi Experts,
I have added the data & cofiles from rollout system to sandbox system via sftp on os level. Now when I am trying to import these requests, the requests are not getting imported.
Can any one tell me the reason?
In tp system log, I found the following entry:
ERROR: /usr/sap/trans/cofiles/K999999.DEV : can't open
: Permission denied
OS is AIX
After transferring from rollout system to sandbox system, should we change permissions of the data & cofiles.
Please let me know. it is urgent
Thanks in advance.
--Hari

Hi Hari,
Yes you are right just go ahead and change the permissions, reimport it works.
Regards.
S.Manu

Task status is not changed in UWL

Similar Messages

Maybe you are looking for