Task status report in cProject 3.1

Hi,
I want to extract task status report from cProject 3.1.
Report should contain task name, status, start date,end date , effort etc.
Thanks in advance
Shiv

Hi,
Activate the form DPR_TASK_HIER for a particular Project type in SPRO screen. Now keep the cursor on any task in cProjects & click on Print pushbutton, this will generate a PDF Report which will contain Task name, Constraint dates, actual dates, administration details etc. In order to add more data to the Report, goto transaction SAMRTFORMS & edit the form DPR_TASK_HIER.
Hope this will help you.
Regards,
Sujay G

Similar Messages

Cannot save status report in cProjects

Hi,
I cannot save project status report in cProjects. When I click the save button, it just shows the timer showing saving icon but never comes out of it.
Could anyone please help and guide me where the problem lies?

Hi ,
There may be mainly two reasons
1) As neil say check your ADS Installation
2) Check the IMG setting as follow
Collaboration Project --> Basic Settings --> Form for printing and project Status Report
in that use Activate forms per Project type .
Select your project and click on right hand side PDF print form
you will find the list of status report , check there status report print form is active or not.
if you standard
then DPR_STATUS_REPORT_AIF Is activated or not.
3) Collaboration Project --> Basic Settings --> Form for printing and project Status Report
in that check the BADI
DPR_STATUSREPORT_PDF AND
DPR_STATUSREPORT_AIF
Is ACTIVATE OR NOT
if you create your own status report form you need to create BADI .
thanks
sunil

Cannot load project status report in cprojects on portal

Hi,
I have checked all the FP_* adobe test programs and my ADS is working fine. I did test my form in ECC transaction code sfp and the form loads properly.
But, when I try to load the project status report(same form) through portal (cprojects)it is giving me connection timeout error.
Could somebody guide me?
Thanks.

Hello,
there can be several reasons why the Statusreport does not come up
a) ACF component is not installed correctly
Check as described in note [766191|https://service.sap.com/sap/support/notes/766191] if the ACF is installed correctly
b) ADS is not set up correctly
Check as described in note [944221|https://service.sap.com/sap/support/notes/944221] if the ADS is installed correctly
c) cProjects config for the status reports is not set up correctly
Check as described in note [978997|https://service.sap.com/sap/support/notes/978997] if your system is set up according to the configuration guide
Best Regards, Andrea
Edited by: Andrea Langlotz on Jun 11, 2008 8:55 AM

Status Reports in cProjects

Hi All,
I am using cProjects 4.0. I have tried to create a "New Status Report" using Template "Project Status Report" on the Status Reports Tab page. Then clicked on the Preview button. Now I am getting a blank page with "Save", "Save and Send" and Cancel button at the top. But when I try to save it, its not saving the Status report also no message is generated.
Therefore I could not generate status report.
Again if I want to "Save and Send" then it it asking for the Recipients Email Id assigned to the User address. But should merely maintaining the Email id in the user address be sufficient enough to send Email to external Ids ? What are the additional configs we need to do ?
I have done the PDF form assignment to the project type and also activated it.
Pls help me out.
Warm regards
Purnendu

Hi all, i resolved the problem ....
you have to check those notes...Note 944221 .. Note736902..Note 702438.
and then check all the ADS config because it´s very easy to have problems with the User and passwords config of the ADSUSER ( Note 894009 ).
Hope this will be usefull.
Regards,
Diego.

How to configure a new status report in cProjects?

First of all, the standard status report PDF is not rendering at all when we generate the status report - we CAN send it with the appropriate data, though, so we know that the program is gathering the data. All of our other custom interactive PDFs are working fine.
Our issue is that we'd like to create a new custom status report but can't figure out how to do it.
We've done the following:
1) create a read only form (zstat_rpt)
2) in SPRO, for our capital and expense project types, we've entered
ZSTAT_RPT in the PDF Print Form sub-folder. Marked it as ACTIVE and
checked the Status Rpt checkbox.
3) Unchecked the DPR_STATUS_REPORT_AIF Status Rpt and Active checkboxes
4) Under Badi: PDF-Based Forms in SPRO, we created a new Enhancement
Implementation (zrp_eimp_stat). It uses BAdi Implementation DPR_STATUSREPORT_AIF
and the description shows as Izrp_eimp_statmplementation: BAdI: PDF-Based Forms
5) In SE19, I go to the badi implementation, into method GET_FORM_NAME and changed
the Returning parameter RV_FORM_NAME to ZSTAT_RPT (my pdf form).
Now, when i go to generate the status report, I get a message "No templates for status reports have been entered for the project type" - I know my project type is capital.
any help on this? any steps I'm missing?

Hi,
I dont think that we can insert new records in WE47, but we can develop the logic in the idoc population program to add status to the idoc.
Please let me know if you need the program code.
Regards,
donepudi

Project Status Reports for cProjects 4.0

Hi Experts,
Does anyone have a document in which functionalities of Project Status Reports are detailed?
I would want to know which kind of data can be extracted from projects and if operations like sum, substraction, aggregation, grouping can be made in these reports...
In addition, if you had some documents about how a Project Status Report looks like it would be also good to have.
Please send the documents to: [email protected]
Of course, reward points will be given for all useful answer...
Thank you all in advance.
Kind Regards,
Isabel

Hi Yasar,
Thank you very much for your document, although that is not really what I was looking for.
I need to design a Project Status Report, so I want to know how does it work, which data does it use (which is the data that can be reported and which data can't), if you can select the data to appear or group it by some attributes, if the manual comments can be inserted attached to each of the data reported (comments related to all phases reported).
So I still need some further details on this (version 4.0 with AIF documents).
Thank you very much!
Kind regards,
Isabel

'Project Status Report' activation in cProjects

Hi,
I was trying to configure the Status Reports in cProjects. I have completed creation of the form (chose DPR_PROJECT), activated the templates for the relevant Project type and also implemented the Badi with the correct form name. I am still unable to see any template dropdown in the application (cProjects). The DPR_Project template should appear in the same for me to create the Status Report. Please advice.
Thanks,
Sachin

Hi Sachin ,
I think, it may be a ADS installation issue.
The configuration of ADS server is somehow not very easy, as I saw so many installations problems with status report in cProj. 4.0.
Would you please check the following notes:
900310 & 992492 .
And the following reports may be helpful to check the setting:
FP_PDF_TEST_00 (returns version number of ADS)
FP_TEST_00 (creates a test PDF)
FP_EXAMPLE_01 (creates a test PDF using SFLIGHT data)
FP_TEST_IA_01 (creates an interactive PDF that can be signed via certificate)
FP_PDF_TEST_12 (returns signatures of a signed PDF  requires secure (SSL) ADS connection  ADS_HTTPS)
Kind regards,
Zhenbo

Cannot see project status report pdf inside cprojects using Firefox

Hi,
I am using firefox software to view project status report in cprojects. It shows me blank.
But if I view Approval document, the pdf shows correct in the browser.
As you might be aware,Please note these pdf reports display inside the webpage area,so please donot reply with solutions of opening pdf in separate browser window etc.
Please help

Hi,
Are you able to open any other pdf forms in cProjects. for eg. approval document?
I guess you need to get the exact location of error.
After the system gives a dump, run transaction ST22 and get the program/function name where the error is actaully occuring.
Regards,
Reema.
PS. pl. award points to all useful answers.

CProjects Project status report not generated

Hi
I am facing problem of getting Project status report for a project in cProjects 4.0
I am at client side and accessing the IDES ECC6.Her I am trying for getting Project status report for the project created.
The error I am getting is :
"WebDynpro Exception: ADS: Request start time: Thu Aug 21 16:53:27 GMT+03:00 2008(200,101). "
In customizing for cProjects I have used the std. form available for the same, activated the same for the project type and when tried to get the report I got the above mentioned error.
Then in se38 I executed the programme FP_TEST_IA_01 the result was :
ADS: Request start time: Thu Aug 21 17:23:42 GMT+03:00 2008(200,101)
Also I have activated the following services
SICF->Services->default_host->sap->bc->fp and fpads, both are active.
But still I am not getting project status report from cProjects.
Please guide me what else should I do to get the project status report?
Thanks and Regards,
Niraj Sikligar

Hi Reema,
Its great to hear from you.
I have run the report : FP_PDF_TEST_00
Out put is :
Version Information: 705.20060620101936.310918
What does that mean ?
Secondly,
I have checked RFC destination for ADS the results were as shown below:
On Technical Settings tab page :
target host: ides
Path prefix: /AdobeDocumentServices/Config?style=rpc
Is this OK?
Is there anything else to be done?
Regards,
Niraj Sikligar

Status Report Preview Error in cProjects

Hi Experts,
I have created one Project Type in cProjects, with reference to Project Type i have created Project with all the elements. Next step is i want to see the Status Report of my Project. When i press Preview button i am getting the following error message:
"Error occurred when generating the print preview (function module: /1BCDWB/SM00000010)
ADS: SOAP Runtime Exception: CSoapExceptionTransport :(100101) "
Kindly help me in resolving the above issue. Thanks in Advance.
regards,
Sridhar.
Edited by: SridarReddy on Dec 1, 2009 9:33 AM

Hi Daniel,
I have the same problem.
When i press Preview button i am getting the following error message:
"Error occurred when generating the print preview (function module: /1BCDWB/SM00000010)"
Could you please tell me what configuration changes you have done on ADS server?
Regards
Ramesh

Project Status Report - cProjects 4.0 - Run time error

Under Basic Settings, I go to 'Forms for Printing and for Project Status Reports'. Here, under 'Create PDF-Based Forms', I select the form 'DPR_STATUS_REPORT_AIF' and Activate it. I then get to 'Activate Forms per project type'.I get to 'New Entries' and add 'DPR_STATUS_REPORT_AIF' and also set the 'Active' and 'Status Rpt' checked.
When I get to cProjects front end, I see the 'Project Status Report' template under the 'Status Report' tab. However, when I click on the 'Preview' button, I get to see a dump.
"The following error text was processed in the system SRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code(100.101)"
Can someone please suggest how to get something useful at the click of the preview button?
Thanks.

Hi,
Yes your basis team should tell you more about this. ADS Credential needs to be installed on the java stack of your cProjects Server. For this you will have to send a message to SAP requesting for the ADS Credential. You will then receive a credential file with its password.
However not all servers support ADS. There is a list of server names that support ADS. You can get the server name on which cProjects is installed from your basis team and I shall let you know if it is supported or not. You can also have a look at in the PAM (Product availability Matrix) for SAP NetWeaver 2004s - Additional Components at http://service.sap.com/pam
Regards,
Reema.
Pl award all useful answers.

Project Status Report - cProjects 4.0

Hi all,
I am using cProjects 4.0.
After selecting the PDF Print form DPR_STATUS_REPORT_AIF for the project type and marking 'Active' and 'Status' report checkboxes, when I go to create Status reports, I can see the template "Project Status Report". However, when I click on the "Preview" button, I get a runtime error saying
"The following error text was processed in the system DRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP server replied with status code 500(100.101). "
Can someone suggest please?

Hi,
Are you able to open any other pdf forms in cProjects. for eg. approval document?
I guess you need to get the exact location of error.
After the system gives a dump, run transaction ST22 and get the program/function name where the error is actaully occuring.
Regards,
Reema.
PS. pl. award points to all useful answers.

CProjects 4.0 - Status Report Problem

Hi all,
I am using cProjects 4.0.
I have selected the PDF Print form DPR_STATUS_REPORT_AIF for the project type. I have also marked the Active and Status report checkboxes.
Now, when I go to create Status reports, I can see the template "Project Status Report". However, when I click on the "Preview" button, I get a runtime error saying "OBJECTS_OBJREF_NOT_ASSIGNED_NO" in the ABAP program "CL_WD_ADOBE_SERVICES" in the method "CREATE_PDF".
Pl help provide a solution to this.
Regards,
Reema.

Hi all,
I am using cProjects 4.0.
After selecting the PDF Print form DPR_STATUS_REPORT_AIF for the project type and marking 'Active' and 'Status' report checkboxes, when I go to create Status reports. I can see the template "Project Status Report". However, when I click on the "Preview" button, I get a runtime error saying
"The following error text was processed in the system DRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP server replied with status code 500(100.101). "
Can someone suggest please?

Sample status report cProjects 4.0

Would someone have an example cProjects status report that contains data? We are having trouble getting this to work in our system. I'm working on the ADS configuration now to address the problem.
It would help if we could see what the report would look like with some example data. We don't know if we should be focusing a lot of energy on fixing this while we don't know what it looks like. I checked what the PDF layout looks like, but I would still like to see an example with some populated data.
Thank you,
Wendy

We were able to see this in our system following a fix to the ADS configuration.

CProjects Status Report Printing

Good Morning,
Is it possible to restrict for certain users not have view/print the cProjects status report, but they should able to access all project types for other part of the cProjects elements, if any one done this before = please share with me?
Regards
Goli.

Hi Goli,
You can do this by hiding the "Status tab" for those users. Take help of basis team.
Regards,
Yaghag

Task status report in cProject 3.1

Similar Messages

Maybe you are looking for