Task stays in process

Hi all,
I have a wf task(submit program) that does not leave the in process state.  It is a background task which sends an extenal email with attachments.  It was working fine and there was a client refresh.  Am I missing a basis setting perhaps?
Thanks in advance,
Scott

Bhooma,
Thanks for the response.  You are correct, the settings in SWu3 were initialized however I have already had them set back.
Here's some more info...
I was running it as a back ground task, I changed it to a run from my inbox.  The task runs the program first then goes to my in box.  When I run it from the inbox it executes the program but the task stays in my inbox no matter how many times I execute it.  Also after the email is sent I get a dialog box that comes up "SAP Connect Send Process: List of Sent Objects.  This did not show up before.  It comes up even if I run the program from se38.
Thanks,
Scott

Similar Messages

  • Flash installer and uninstaller stays in processes and keeps laptop form going to standby

                   i have a fujitsu lifebook t-series 4020d and any time in i have to install flash player or inunstall it it stays in processes and makes it so it won't go into standby till you go to task manager and end the process. my brother has the same laptop and the same thing happens to his. just seeing if this bug was reported. hopefully this can be fixed because it is kinda anoying with all these updates that seem to happen.

    oh sorry it is winxp tablet edition and firefox 3.6.18. this is not a browser issue though it is a flash installer/uninstaller issue. it should never stay in the processes after it is finished  i got the installer and uninstaller from this web site and it does updates when the comptuer is restarted. after the update is done it stays in the processes and when you try and put comptuer to sleep, standby, even shutting down and restarting you have to go to task manager and en the flahs installer it used. if you try to standby,sleep,restart,shutdown it don't do it. as soon as you end the flash process it goes to standby,sleep,restart,shutdown if that bmakes sense. it hangs on the installer.

  • OIM 9.1.0.2: Remove user assigned to a task in Provisioning Process

    I have read Note: Ability to Have Multiple Approvers Per Resource Object in OIM [ID 429999.1], and executed each steps described in it. But when grant these resource object to some user. First the request was not sended directly to a approval process, as had been expected that I would. The request was send to a provisioning process, specifically to user has been assigned a task, when the user approves the request until the request is then sent to approval process.
    I need to send directly to a approval process, because that's where I have defined my levels of approval.
    I'm using oim 9.1.0.2 BP18 running on OC4J 10.1.3.5 on AIX 6.1 64-bit clustered install with two nodes, Oracle Database 10.2.0.4 on AIX 6.1 64-bit on RAC.

    Hello Everyone,
    Thanks for your response. Actually i have a Approval Process, where i have defined my levels of approvals. In Resume I have this Env. :
    1.- A Resource: ResourceA
    2.- A Provisioning Process in relation with ResourceA.
    3.- A Approval Process in relation with ResourceA.
    The request was send to a provisioning process, specifically to user has been assigned a task, when the user approves the request until the request is then sent to approval process.
    I need to send directly to a approval process, because that's where I have defined my levels of approval. In other words i need to bypass the user assigned a task in provisioning process.

  • Firefox won't close without using Task Manager - end process; can't start in safe mode or disable add-ons

    I've been having a memory leak/hanging problem for weeks -- FF slowly increases memory usage until it's at almost 100% and then freezes and I have to shut it down via Task Manager/end process.
    Last week I updated to FF 12, and I also added the Web Developer 1.1.9 add-on. Now every time I open Firefox it tries to go to the "Web Developer installed" page, but the page never loads. Nothing else will load either.
    I can't start in Safe Mode because of the problem with having to close it in Task Manager. I select "restart with add-ons disabled" and it just never opens. The Add-On manager page won't load, so I can't disable Web Developer to see if that's the problem.
    I've uninstalled Firefox and reinstalled, and it still goes right back to the Web Developer page when I open the freshly installed copy.
    Help, please!

    Have you already tried clearing the browser cache, opening a blank tab, and trying to open some other website ?
    * [[how to clear the cache]]
    Instead of trying to open safe mode from within the User Interface menu have you tried alternative methods such as holding the shift key when you start Firefox. (After checking for running Firefox processes or plugincontainer and killing them if found )
    * see [[safe mode]]
    * [[firefox hangs]]
    If using safemode does not help first of all try creating and using a new profile.
    * [[Basic Troubleshooting#w_8-make-a-new-profile]]_8-make-a-new-profile
    If all the above fail then try a clean re-install of Firefox
    * [[Basic Troubleshooting#w_7-reinstall-firefox]]_7-reinstall-firefox

  • I just updated firefox TODAY 8/17/11 and after the update i can't open firefox unless i restart my computer or i delete going to windows task manager and process, also i can't open a new window, it won't allow it. please can you help me

    I just updated firefox TODAY 8/17/11 and after the update i can't open firefox unless i restart my computer or i delete firefox going to windows task manager and process, also, i can't open a new window, it won't allow it. please help me, everything works on IE, Google Chrome and Safari, everything went wrong after the update

    Hey Elaine07!
    I have an article here that can help you with that issue. This article will help you make sure you have uninstalled iTunes correctly and help you troubleshoot the launch issues you are seeing:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • SSIS-Execute Process task Error _File/Process "\\Servername\Foldername\batfile.bat" is not in path

    Hi Sir,
    I have designed the SSIS Package in 2012 Version. and i have deployed into the Integration Server,using Project Deployment Model.
    In the SSIS Pacakge we are calling the batch file using Execute Process task.
    when i am Executing the SSIS pacakge using Visual Studio(Sql Server Data tools) which is working fine.
    When i Execute the Pacakge uisng Sql server Management Studio,after the Deployment i am getting the below Error message.
    ExecProcess task:Error: File/Process "\\Servername\Foldername\batfile.bat" is not in path.
    Thanks for your time.
    Regards
    Prasad

    Hi Prasad,
    When you say executing the package in SSMS, I think you right click on the package and execute it manually rather than execute it through SQL Server Agent job, right? How did you execute the package from the SSMS on DEV server? Have your also deployed the
    SSIS project to the SSISDB catalog on DEV server or you used SSMS tool on DEV to connect to the QA server to execute the package?
    When you log into the Database Engine instance, make sure the credentials you used has access on the shared folder which hosts the .bat file. Besides, I think the issue may be caused by the Windows UAC feature which may lower the permissions level of an
    administrator to a standard user. So, I suggest that you run the SSMS as administrator to see if it works.
    Regards,
    Mike Yin
    TechNet Community Support

  • PCW call custom task after approval process

    Hi comunity,
    I need to know how could call a custom task from PCW. Because I need to update a Z log table after the users approval SC just when the document is set to approved. I've checked the WS40000015, but seem to me that this is not possible.
    I have no other option to use the BBP_DOC_CHECK_BADI to do so? Am i right?.
    Regards.

    Rick, thanks for your answer.
    I didn't explain myself right with Z table. This is a relationship that required my customer between different entities (SC guid and one external number ID from a Non SAP SRM system and other fields).
    I agree that maybe the business requirement could be revised. But the core question it's the same, is not posible call a custom task from the process level, because seems to be limited to decision tasks. I don't get why SAP does not create a condition step in WS40000015 which allow us to call custom background tasks.
    I will use the BADI, hoping to get the SC when it's already approved.
    Regards.

  • Can the name of the TASK bound to process level determined dynamically?

    In the 'Complete and Order' step of shopping cart scenario, we can display/ edit agents. This function enable us to see the approver list. In the 2nd column Process Step, there will be a description of the approver, which is the name of the corresponding task in the BRF process level. But when we want to reuse the task for several process level, we need to dynamically set this description. Since it is a name of the TASK, how can we achieve that?
    Thanks for reading.

    Actually this is what I was trying to do:
    <select name="<c:out value="${id}"/>versions" >
    <c:if test="${param.{id}versions == yyy}"> selected </c:if>
    </select>
    Do you know how to make the comparision works? The problem is the double curly bracket.
    Thanks again

  • The task cannot be processed further until the current edit session is act

    Dear Sir/Madam
    I have installed standalone Oracle WebLogic Server 11g(10.3.6) with Sherman Update3,for I used JDeveloper 11g Release 2 (11.1.2.3.0).
    I Sometimes got below message for several times and it can be repeatable when I have wanted to deploy my applications.
    "[11:38:24 AM] [Deployer:149140]The task cannot be processed further until the current edit session is activated. When this occurs, task processing will continue. The user can exit the deployer tool without affecting the task."
    Furthermore, I run weblogic console and I see to appear the two buttons "Activate Changes & Undo All Changes" in spite of the weblogic is in development mode, yet the state of my application is "deploy initialize". I Click "Activate Changes" button but it's not happened.
    Finally, for dealing with this problem, I have to shutdown & start up the weblogic .Next, I can deploy my application.
    Best Regards,
    Saeed.

    Hi,
    That message is not an error. It means that you need to connect to the WebLogic Server Console and activate the changes.
    Solution
    Access the WebLogic Server Console and click on Activate Changes.
    Confirm if your application shows in the WebLogic Server Console under "Deployments".
    Regards,
    Kal

  • Update a Task in a Process Definition

    I am trying to use the OIM API to update a task in a process definition. In the tcWorkflowDefinitionOperationsIntf, there is a method called updateWorkflow(WorkflowDefinition workflow).
    With this method, I am able to update the process definition to make it auto-prepopulate, auto-save, and default process.  Is it possible to update a task in a process definition with this method?

    A very simple example would be changing the description of a task.
    E.g. Design Console -> Process Management -> Process Definition -> Modify the description of "Email Updated" task in LDAP User process definition .
    I am wondering if I could use updateWorkflow(WorkflowDefinition workflow) to do the task above rather than using design console.

  • How to call OID delete user process task from AD process definition

    Hi All,
    I wanted to call OID delete user process task from AD process def. I have created a process task in AD Process def which will be integrated with OID Delete User adapter. How can i map OID related attributes to the adapter api?
    Expected inputs for OID delete api :
    root DN
    orgDN
    admin pwd
    server
    attr lookupcode
    XLOrgFlag
    sProcessInsKey
    UserID
    PDataOrg
    port
    AdminID
    SSLFlag
    here i cannot map some like : sProcessInsKey
    any pointers would be appreciated.
    Regards,
    Ashok

    OID delete user process task from AD process defWhy don't use call Revoke Resource API ?
    http://otndnld.oracle.co.jp/document/products/id_mgmt/idm_904/doc_cd/javadocs/operations/Thor/API/Operations/tcUserOperationsIntf.html#revokeObject%28long,%20long%29
    Use getObject API
    Iterate through resultset.
    If RONAME == OID User then call revokeObject

  • Task Priority in Process Routes

    Gurus,
    I would like to make changes to  the Task Priority showing Process Route tab.Is there a BADI available for making this change? or can it be accomplished through configuration.
    Attached is the screenshot for reference.
    Kindly advice
    Thanks & Regards
    Jo Pz

    Hi Samuli,
    By changes I mean if I want to reduce the number of Task priorities listed from 1-9 or change the description of the priorities from "Medium" to Moderate.
    I want to show only 3-5 Task priorities.
    Hope I made it clear.
    Thanks & Regards
    Jo

  • Execute Process Task - Error :The process exit code was "2" while the expected was "0".

    I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2  and updating the old data from db1 to db2.
    For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
    I am using the Execute Process Task  and the process parameters I am providing are:
    WorkingDirectory : C:\Program Files (x86)\Microsoft SQL Server\90\COM
    Executable :      C:\SQL_bat_Files\SQL5\TC_CTI\customer.bat
    The customer.bat file will have the following code:
    tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER"  -f "c:\SQL_bat_Files\sql5\TC_CTI\sql_files\customer1" 
    the .sql file will be generated at:  C:\SQL_bat_Files\sql5\TC_CTI\sql_files\customer1.
    The Problem:
    The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
    [Execute Process Task] Error: In Executing "C:\SQL_bat_Files\SQL5\TC_CTI\package_occurrence.bat" "" at "C:\Program Files (x86)\Microsoft SQL Server\90\COM", The process exit code was "2" while the expected was "0". ]
    Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
    Can anyone help ?

    Jwelch,
    Thanks for the input,
    "Change the SuccessValue property of the Execute Process task from 0 to 2 (which means that you will get a failure if there are no differences, since TableDiff returns 0 in that case)."
               -- Not possible b'coz if there is no difference in the tables, which is also a possiblility, the job will fail.
    "FailTaskIfReturnCodeIsNotSuccessValue to FALSE (which means it won't fail regardless of the code returned)."
              -- Does this mean the job will never fail? Lets say the target table doesnt exist, then, by setting "FailTaskIfReturnCodeIsNotSuccessValue to FALSE " will the job fail? I guess my question is, how is what you've suggested different from setting "ForceExecutionResult = Success". Both the cases will show the task status "Success" even if there is an error.
    Is there a way to keep the property of job 'Failure' if there is any generic errors like target table not found or say, the path given for .sql file output is not valid etc.
    Thanks again,
    Little_Birdie.

  • Invoke task from another process defnition - Is this possible

    Is this possible to invoke task from another process defnition?
    PD1 has task1
    PD2 has task2
    call PD1.task1 from PD2.task2
    If possible, then what API method should I use.
    Thank you!

    You would start by using the findObjects API to find all the objects for a specifc user. Then you would want to find the appropriate one from the result set. Then once you find this, you will need to either query the database or use apis to find the task key for the specific task name you want for that process definition. Once you have the process instance key and the task instance key for that user, you can then use the api to insert task into the users process instance.
    Not sure all the APIs to use, but in the end you'll use addProcessTaskInstance found in the tcProvisioningOperationsIntf. You can search the forums for that API and examples of it's usage.
    -Kevin

  • Background task stays with status "in process" without creating any error

    Hi all,
    we created a two step approval workflow for parked documents based on the SAP WF templates WF WS10000051 (WF frame) and WS10000053 (two step approval sub WF). The problem now is, that after the two approvals have been given and the release flag is set the system should post the document. This is done in a background task. This task is started automatically but the status stays at "in process" and the document remains "parked" and not posted.
    What we did so far to solve the problem:
    1.) Check if shortdump has been created via ST22 --> not the case
    2.) Refreshed buffer via SWU_OBUF
    3.) Reacticvated/executed task with workitem id from log in SWIA
    --> nothing solved the problem so far. Please help!
    Thanks in advance. Johannes

    Hello Johannes !
                  You have asked "What do you mean with populate the value?"
                            Populating means conceiving the variable or container with valid value.In your scenario , with reference to your URL http://img851.imageshack.us/i/wflog2.jpg/ , POSTED_FLAG should be populated with value X.It should not be "Not Set".
                            With reference to your URL http://img717.imageshack.us/i/wfprotocol.jpg/, Set Release Flag step does not sets release flag.
                            It's evident from the URL http://img263.imageshack.us/i/flagreleasesetsw01.jpg/
                The solution for your problem is straight forward : Pass all the export or result parameters of RELEASE step to SET RELEASE FLAG step. Similarly , pass all the export or result parameters of SET RELEASE FLAG step to POST PARKED DOCUMENT STEP.
    Answer for question 1 : After  successful workflow transportation, it's version changes.Never mind the versions unless either of the versions are inactive or the version you require is inactive.
    Answer for question 2 : The user WF-BATCH should have SAP_ALL and SAP_NEW profiles.
    Regards,
    S.Suresh

Maybe you are looking for