Task type OTHER on ST03

Hello,
After a botleneck on our production system we noticed that average Roll Wait Time (ms) was very high = 25.218,8.
We are still investigating the root cause of this bootleneck to avoid future issues...
Do you have any idea about what tasks are included on OTHER type and where the error couls be?
Many thanks in advance for your help!
rgds,
Natxo

Hi,
High Roll Wait Time in transactions points to Network/CPIC related issues. Refer SAP Note 1100926 (FAQ: Network performance) , 38682 (Parameter settings for RFC) && 63476 (Response times too high for CPIC/RFC in ST03) to get more information.
Also Perform RFC trace to get the details about the Program/Gunction modules for which high roll wait time is seen. More Data has been requested by any transactions/FMs via RFCs ?
Consult your Network Team to diagnose any packet drops or any bottlenecks in Network links.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Nov 22, 2010 11:43 AM

Similar Messages

ST03N Task Type "other"

I am fairly new out of college into SAP Basis Administration. My boss has asked as to why some of the tasks in the workload monitor are taking so long, mainly the task type "other". The avg response time/diag step is ~85000 (ms), and ~83000 (ms) is spent in the database. All be it interesting that doesn't tell me much, because I have not a clue what "other" pertains to, and why its spending so much time in the database. Any help would be much appreciated.
SAP Login: 710
MS Windows SP 3
Any information needed, just let me know and I will be sure to provide it.
David

David,
My 2 cents on this. Usually, if a process spends too much time on the database, it would mean that one or more of the following is possible.
1. The process is trying to read a lot of data. In which case, you will need to analyze what the process is doing or trying to read. If it is a SAP program, some buffer tuning might be needed. If it is a custom program, the program might need to be tuned. There is more to it than this.
2. Network problem. I doubt if this is the problem especially if your entire database does not seem slow. In other words, a network problem would not be isolated to a certain tcodes/programs
3. Disk problem. If the process is trying to read data from a disk that is slower then this could result in degraded performance.
There is no real "one solution" to this. It will need some poking around.
As far as "Other" goes, do the following.
Highlight "Other" and hit F1. You will see documentation on each of those Task Types. "Other" is not defined, which leads me to believe that this could be something running on the database directly without SAP knowing about it ? Maybe, maybe not.
Check if there is a script or something running on the db. What is the time frame ? Check the transaction profile for that day/time and sort it according to high db times. Maybe that will lead you to something.
Kunal
Edited by: Kunal Belnekar on Jun 12, 2009 9:57 AM

ST03 Export: How to export all instances and task types?

I am exporting ST03 data using SAP GUI
I can export data for a single task type and a single instance.Is there a way I can export the Time Profile data for all instances and all task types in a single export? Can I do a single export rather than NxM exports?
Also, when I export to a text file, there is a header that reports the instance, data, and task type. When I export to excel file I only get the table, not the header info. Is there a way to to get the header info into the excel export?
Is this the appropriate forum for these questions?
Any help is appreciated.
Thanks.
Tim

I moved this question to an ABAP forum. Here's the [thread|ST03 Export: How to export all instances and task types?;.
Tim

HTTP Task Type missing from Load History in ST03

Hi
The HTTP Task Type is missing from Load History in ST03 in my development system (works fine in QA and Prod).
CRM 5.0 (NW7)
SAP_BASIS PL 10
I have applied SAP notes 1017720 and 1049634 but had no success. Any ideas?
Regards,
CJ

Hi,
This one may give us some clue:
https://social.technet.microsoft.com/Forums/en-US/a3753cf4-3def-494b-9c08-5117608ce538/task-sequences-not-showing-in-software-center?forum=configmanagerosd
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

RFC Task type

Hi,
Can any1 tell me how different is task type RFC ( in ST03N) than the task type dialog.
Which activity is recorded in RFC task type. For eg. if DIA makes an rfc call, is it recored in RFC task type too along with DIA?
Why response time of RFC task type doesn't include roll wait time when DIA task type includes it.
Regards,
Hussain.

Roll-Wait time will be part of the response time of the dialog step (the caller) because the caller had to wait for the RFC to execute.
Roll Wait will not be part of the response time of the RFC server step (the called) because it did not wait; it just did the function call.
The Roll Wait time of the caller should be about the same as the Response Time of the callee.
For a discussion of components of response time see SAP Note 1063061 - Information about response time in STAD/ST03.
Tim
Edited by: Tim Wise on Feb 8, 2008 1:36 PM

In R12.2.3 Task type LOV is blank

Hi,
We are implementing R12.2.3 Service modules for our client.
But after defining the task types using the Service Responsibility, the same are available under Task manager window.
But none of the task type neither the seeded one are available under the task type LOV in create service request form.
Nor we can see any task type available under mapping objects window which opens after clicking on Map Types button in Task Type definition form.
Is there anything we missing any profile option or some key setup.
Please let me know if anyone has seen this issue before.
Best Regards,
Shyam

Hi Shyam,
Please open the Task Types form ( JTFTKTTY.fmb) and click on the 'Map Types' button.
Query for Source Object = 'Service Request'.
a) Do you see Task Types already mapped?
b) If you add a row: there are no Task Types in the LOV at all? Do you see any errors at the bottom of the form (i.e. FRM-41826)?
Thanks,
M.

WMS - Cycle Counts - are generating with no user task type

Hi,
I have configued Cycle counts and it is creating tasks with no user task type.
That too .. this is happening for some tasks .. others are created correctly.
As there is no user task type .. It is not getting displayed on Gun.
Can anyone pls help me .. Thanks in advance.
Regards,
Naveen S

Hi,
I have configued Cycle counts and it is creating tasks with no user task type.
That too .. this is happening for some tasks .. others are created correctly.
As there is no user task type .. It is not getting displayed on Gun.
Can anyone pls help me .. Thanks in advance.
Regards,
Naveen S

How to set task type of a task in MS Project using excel vba code.

Hello Gurus,
I am generating MS Project files(.mpp) files form excel data. An excel macro in the excel file will read the excel data and will generate the .mpp file. It is working fine. now i want to set the task type of all the tasks to "Fixed work" from excel
vba code.
How to use the property PjTaskFixedType in setting the task type??
refer below links
http://msdn.microsoft.com/en-us/library/office/ff861713.aspx
http://msdn.microsoft.com/en-us/library/office/ff864157.aspx
Can someone help me in setting task type property from excel vba.
I have attached my sample code used to generate the mpp file. It is not the complete code but you will get an idea from it.
Set pjApp = CreateObject("MSProject.Application")
pjApp.FileNew
Set newproj = pjApp.ActiveProject
newproj.Tasks.Add (task_name)
newproj.Tasks(mpp_row_number).Start = task_start_date
newproj.Tasks(mpp_row_number).Finish = task_end_date
newproj.Tasks(mpp_row_number).ResourceNames = resource_name
pjApp.FileSaveAs mpp_file_save_path & mpp_file_name & ".mpp"
pjApp.FileClose
pjApp.Quit
Any help is appreciated.

Hi Syamku,
A simple example that sets the task type:
ActiveProject.Tasks(2).Type = pjFixedDuration
ActiveProject.Tasks(3).Type = pjFixedUnits
ActiveProject.Tasks(4).Type = pjFixedWork
http://msdn.microsoft.com/en-us/library/office/ff860469(v=office.15).aspx
Hope this helps

'Task Type' property in Monitoring of Task iview in MSS

Hi,
There is a property called 'Task Type' in the iview 'Monitoring of Task'.
This is supposed to restrict the display of task types to what is specified here in this property only.
For eg, if i have 3 task types configured for It0019 in the back-end and want only 2 to get displayed in the portal, then i will mention those task types in this property.
1 -- Monitoring Overtime
2 -- Monitoring payments
3 -- Monitoring absence.
I have mentioned the task types separating them by ';'.
However now no task is getting displayed.
Can anyone help please?
Thanks and Regards,
Pinki

can you please check your iview property
FUNCTION HRMSS_RFC_RD_DATES_GETLIST
FUNCTION HRWPC_RD_DATES_GETLIST_INTERNA
LOOP AT lt_monitoringtask
                INTO ls_monitoringtask
                WHERE ( p0019-termn BETWEEN begda AND endda ) OR
                      ( p0019-mndat BETWEEN begda AND endda ).
        check for allowed employment status
          IF NOT t_employmentstatus_mt[] IS INITIAL.
            LOOP AT lt_action
                    INTO ls_action
                    WHERE pernr = ls_monitoringtask-p0019-pernr AND
                          begda <= ls_monitoringtask-p0019-termn AND
                          endda >= ls_monitoringtask-p0019-termn.
              EXIT.
http://help.sap.com/saphelp_erp60/helpdata/EN/43/376d7ced1f1bcee10000000
a1553f7/frameset.htm

Query regarding changing the human task type

Hi,
I am new to BPM.I have created a process with two tasks and mistakenly selected both the human tasks with the initiator pattern.And now I am getting this compilation error which says my process contains more than one initiator tasks.Is there any way in which I can change the human task type to simple after the process has been created?
Thanks in advance

Hi,
Thanks for your reply.I found that out too.It is really strange that there is no way in which you can change the type once you have created a user task.
Thanks
Rahul

Con not assign TASK TYPE for Put away during PO receipt

Good morning everyone!
I spent a lot of time to setup WMS Task assigment rule with no result.
My goal is to make Task assigment for inbound tasks. Particulary put away after receipt.
Expected behavor: after receipt in receiving area system should assign task type. This can be checked via "Warehouse control board" form, "Task type" column.
Actual (current behavour): task is created and even can be seen via "Warehouse control board" form. But there's no task type. For Task assigment the only rule exists.
To be sure that it works with other tasks types I've checked on Move order. Works well.
NEED YOUR ADVISE
Thanks in advance.
Eugene.

This case happened to me too in R12.
The system did not assign task type after receipt in the receiving area. Moreover, I cannot update status from "Pending" to "Queue" to the user via "Warehouse Control Board" form for these put away tasks. It always show the error message "Cannot update putaway task." after press execute button. So How can I assign these task to specific user?
Need your advise too,
Thanks,
Surachai.

Usage task type, task component and task level and service number in time s

Hi guru,
when I compile time sheet, I want to fill field task type, task component, task level, sender purchase porder, PO item e service number but the system give me an error, LR105, "service does not exist". I uderstand that this error is caused from missing record inderivationor task component but I work on more services.
Is there anyway to set in this derivation all the services or a range of services?
Thanks
Regards

not answered

Task Type in 0019

Hi,
Is there any feature, by means of which we can default the Task Types in Infotype 0019?

In Userexit EXIT_SAPFP50M_001 . In Include ZXPADU01.
DATA: w_P0019 TYPE P0019.
IF ipsyst-massn <> space AND
( ipsyst-ioper = 'INS' OR
    ipsyst-ioper = 'INSS' OR
    ipsyst-ioper = 'COP' OR
    ipsyst-ioper = 'MOD').
CASE innnn-infty.
WHEN '0019'.
*convert prelp to pnnnn structure
CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
EXPORTING
PRELP = INNNN
IMPORTING
PNNNN = w_P0019 .
*Here you can have more conditions like for which Action Types you want the
IT0019 to default .
*Default Task Type
w_P0019-TMART= '01'.
*convert pnnnn to prelp structure
CALL METHOD CL_HR_PNNNN_TYPE_CAST=>pnnnn_to_prelp
EXPORTING
PNNNN = w_P0019
IMPORTING
PRELP = INNNN.
WHEN OTHERS.
ENDCASE.
ENDIF.
Thanks ,
Sucharita Das

Help-Task not found - Please check the Task Type, Name and Location are cor

HI all,
i have upgraded my owb from version 11gr1 to 11gr2. the installation is complete and all my mappings and objects are imported successfully.
i was able to execute the mappings using the sql code:
@/oracle/product/11.2.0/owb/rtp/sql/sqlplus_exec_template.sql
by logging into sqlplus as the user in whose schema mappings are deployed.
hOwever, suddenly i am getting the error since sometime back - not sure what might have happened or what might have gone wrong. can someone please help me understand what might be wrong - how to decode this?
Here is my error:
@/oracle/product/11.2.0/owb/rtp/sql/sqlplus_exec_template.sql
Role set.
Enter value for 1: WSODS
Call completed.
Enter value for 2: ODS_SCHEMA
Enter value for 3: PLSQLMAP
Enter value for 4: MAPPING_1
Enter value for 6: ","
Enter value for 5: ","
Stage 1: Decoding Parameters
| location_name=ODS_SCHEMA
| task_type=PLSQLMAP
| task_name=MAPPING_1
Stage 2: Opening Task
begin
ERROR at line 1:
ORA-20001: Task not found - Please check the Task Type, Name and Location are
correct.
ORA-06512: at "OWBSYS.WB_RT_API_EXEC", line 759
ORA-06512: at "OWBSYS.WB_RT_SCRIPT_UTIL", line 910
ORA-06512: at line 2When i execute this: i get the result as follows:
SELECT warehouse_object_id, store_id, object_type_id, object_type_name, object_name FROM owb$wb_rt_warehouse_objects
where object_name = 'MAPPING_1';
WAREHOUSE_OBJECT_ID STORE_ID OBJECT_TYPE_ID OBJECT_TYPE_NAME OBJECT_NAME
15947 15325 769 PLSQLMap MAPPING_1
1 rows selectedEdited by: Chaitanya on Mar 5, 2012 3:33 AM

Hi Chaitanya,
Did you get any resolution for this error? I'm facing the same error while trying to execute OWB mapping through this command.
Any help would be much appreciated. Thanks.
Regards,
Jagari

How to change the task type of bdoc in sap crm

Dear CRM Experts,
I am new to CRM. Want to know how to change the task type of Bdoc from update to insert. I am gettind B doc error due to the reason that under object_task the entry is U , whereas i have to change it to I (insert).
Pls provide deatil answer. Points will be given.
Regards
Rajat
Edited by: Gurinder Pal Singh on Jul 21, 2011 10:17 AM

Hello Rajat,
Please provide us more information about the error you have and it's description so that we can help here arounfd here.
thanks
Willie

Task type OTHER on ST03

Similar Messages

Maybe you are looking for