Tasl list group and group counter

hi,
i have one requirement . I have give internal number range to the task list. so my need to to create task list with one group and several group counter. But what is happening is when i run LSMW for that. seperate group numbers has been generated for each task list. is there any way to get the same group number with different counters using LSMW>

hi
since you have given internal number range for task list system will try to create task list with different group numbers .if you want the same group number with different group counter then i think you have to use the task list with external number and use the number created before
regards
thyagarajan

Similar Messages

Group and Group counter in Routing

Hi all,
what is group and group counter in routing , how these are used in routing , please explain.
Regards,
Joseph.

Dear Joseph,
1.Each routing is stored against a group and group counter no.
2.When we create routing without respect to any material and only by giving the plant,the set of operations gets saved under one
group counter and group no.
4.Many materials can be assigned to this same group and group counter no,so that the routing is valid for all the materials included.
5.When you create a routing for material specific,the set of operation gets saved in a group no and group counter no as 01,when
you create another routing with another set of operations for the same material,plant and task list combination now the group no
remains same and the group counter gets saved under 02.
6.This data can be further helpful in assigning the routing data in the production version,.
Check and revert
Regards
S Mangalraj

How do I know which group and group counter used to create current estimate

Is there a way to know, if for a given set of materials, what groups and groups counters have been used to create the current cost estimate. Or for a given comboniation of material, group and group counter has been used to create a current cost estimate. I can look each up through displaying the cost estimate but I am looking for a quick way since the number of materials are in 100s.
I was wondering if there is a table I could look up to get the info.
Any help would be much appreciated.
Regards

The name of the table that needs to be used is KEKO. I figured it out so I thought I would share
Edited by: NIK83 on Mar 7, 2011 10:16 PM

Anyconnect tunnel-group and group-policy from LDAP

Recently we've changed from LOCAL to LDAP authentication and added additional group-policies for different users to increase security.
To prevent users from selecting an incorrect group-policy, the LDAP server provides a IETF-Radius-Class value which matches the different group-policy names.
It is my understanding that the authentication method is provided by the tunnel-group.
tunnel-group DefaultWEBVPNGroup general-attributes
authentication-server-group LDAP_AD
This all works, but for _one_ of the group policies i'd like to enable (external) two factor authentication. Two enable two factor auth a 'secondary-authentication-server-group' needs to be set in the tunnel-group.
Creating a tunnel-group which maches the name of the group-policy doesn't seem to have any effect. When listing the connected users via "show vpn-sessiondb anyconnect", it always states the correct Group Policy but also always DefaultWEBVPNGroup.
When enabling the listing of tunnel-groups for webvpn, thus allowing users to select their own tunnel-group, the two factor auth does work.
To summarize, is it possible to let LDAP decide which tunnel-group is used or is there another way to have different group policies without users being able to choose ?

Fabian,
Your connection lands on a tunnel group and picks a group policy.
A typical way to overcome the problem you're indicating is by using group-url.
a URL is bound to a specific tunnel-group and allows you to land directly on the one you desire.
vide:
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/98580-enable-group-dropdown.html
M.

How to create Groups and Group Leaders in Clusters.

Hi,
As we know in unicast there is one to one communication and there are groups to control the Thread
Management, How the Groups and the Group Leaders are created.
Regards,
Vardhan.

Unicast clustering uses TCP/IP sockets to pass cluster messages between members. To avoid requiring each cluster member
to have connectivity to every other cluster member, WebLogic Server uses a group leader strategy whereby the oldest member
of the group (in other words, the server that was started first) is designated the group leader. All members of the cluster
connect to the group leader so that the group leader acts as the relay point for cluster messages between members.
If the group leader goes down, the next oldest member becomes the new group leader.
As you can imagine, the group leader strategy works well for small groups but becomes less efficient as the number of members
of the group grows large. As such, WebLogic Server uses a multiple group leader strategy where it limits the number of members
in a group to 10. If the cluster is larger than 10 members, WebLogic Server splits into two or more groups, each with their own
group leader. The group leaders themselves are all interconnected to minimize the number of hops that a cluster message must
traverse to reach all cluster members.

Group and group counter used to create cost estimate

I am creating a custom report and would like to know what table do I have to use if for a given material the program has to pick Group, Group counter and the task list type that were used in creating the cost estimate for that material. Any help in this regards is much appreciated.
Regards,

The name of the table that needs to be used is KEKO. I figured it out so I thought I would share
Edited by: NIK83 on Mar 7, 2011 10:16 PM

Group and group counter in sap

Hi all,
when i am creating rate routing while how can i change group number, external entry is not possible for group.,

Dear Joy,
check the number range interval in T.Code OP62 for the number range interval whether the check box is included for external
number allowed(which means within the from - To range a number can be entered externally for creating routing).
If not means you can onlu use interval number range,if required a different number range for external series can be configured.
Check and revert back.
Regards
Mangalraj.S

Bea Portal Group and Group selection / um:getPorperty

Hi,
I would like to know if it is possible to set the default group
in which <um:getProperty> looks into when the user does not have
the requested property set into his profile.
I noticed that by default it looks into the current group portal.
However I would like to make it look into a specific sub group
of the group portal.
In the same way there are checks to dertermine if a user belongs to
several portal groups, I would like to extend these checks and include
sub groups in the tests and selection.
I saw that the webflow uses GroupFormProcessor and GroupProcessor but
couldn't find the source code to see what needs to be initialized for
<um:getProperty> to work correclty.
I saw the successor attribute in <um:getProfile>, but I would like to
know if there's a way to avoid specifying it each time... by setting a
value in the session for instance ?
Thanks for your help,
Best Regards,
Thierry

Hello Thierry,
You probably want to set the explicit successor in the session. A
successor is a group from which a user inherits properties. An explicit
successor is one that is specified in the getProperty() call underlying the
<um:getProperty> tag. Just for your information, this is as opposed to an
implicit successor, which is persisted for the user and is associated with a
property set. You can use the methods of ProfileWrapper to persist an
implicit successor for a user for a specific property set.
The portal framework sets the ProfileWrapper in the session using the
com.bea.p13n.usermgmt.SessionHelper.putProfileInSession() method. It sets
the explict successor for this profile to be equal to the group that was
selected by the user to apply for this portal session when they logged on
(if they are only a member of 1 group, then they were not prompted for which
group...the group was simpley set as the explicit successor). The call to
SessionHelper.putProfileInSession() is done in the PostLoginProcessor in the
portal security webflow (see the webflow in your EBCC).
You can override this by using SessionHelper.putProfileInSession()
yourself or by putting <um:getProfile> into your portal.jsp page.
<um:getProfile> does the same thing (uses
SessionHelper.putProfileInSession() to put the ProfileWrapper into the
session).
If I were you, I'd put <um:getProfile> with session scope at the top of
portal.jsp and use the group that you are interested in as the explicit
successor.
See the <um:getProfile> docs at
http://edocs.bea.com/wlp/docs70/jsp/p13njsp.htm#1001358
"Thierry Bensoussan" <[email protected]> wrote in message
news:[email protected]...
Hi,
I would like to know if it is possible to set the default group
in which <um:getProperty> looks into when the user does not have
the requested property set into his profile.
I noticed that by default it looks into the current group portal.
However I would like to make it look into a specific sub group
of the group portal.
In the same way there are checks to dertermine if a user belongs to
several portal groups, I would like to extend these checks and include
sub groups in the tests and selection.
I saw that the webflow uses GroupFormProcessor and GroupProcessor but
couldn't find the source code to see what needs to be initialized for
<um:getProperty> to work correclty.
I saw the successor attribute in <um:getProfile>, but I would like to
know if there's a way to avoid specifying it each time... by setting a
value in the session for instance ?
Thanks for your help,
Best Regards,
Thierry

How to print/list all the groups/users present in Weblogic using Java code

Hi,
Weblogic version : 11.1.1.5
How to print/list all the groups/users present in Weblogic using Java code
I want to make a remote connection to Weblogic server and print all the users/groups present in it.
I have gone through the below mentioned site, but I cannot use the same approach since most of the API' are deprecated for example "weblogic.management.MBeanHome;"
http://weblogic-wonders.com/weblogic/2010/11/10/list-users-and-groups-in-weblogic-using-jmx/
Thanks in advance,
Edited by: 984107 on 05-Feb-2013 05:26
Edited by: 984107 on 05-Feb-2013 22:59

see this http://www.techpaste.com/2012/06/managing-user-groups-wlst-scripts-weblogic/
Hope this helps.

Calendar View: Unable filter Recurring Event by Start/End Time and Group by Recurring Event View

Hi All,
I have just found several issues with Calendar View from WSS 3.0:
Unable to filter by [Start Time] and [End Time]
I am not sure why these 2 columns doesn't appear in the Filtering column in the View Settings. The workaround found in the internet is to create calculated column for Start Time and and End Time. However, it doesn't work for Recurring Event, the calculated column will show only first recurring event Start Time.
Unable to use "Group By"
When I create new view in Calendar using format: "Standard View, with Expanding Recurring Events", there is no option to specify "Group By". Anyone knows how to show all recurring event in List view and grouped by Start Time (or any other column).
Thank you and apprecate for any idea.

Hello,
I got this from a colleague of mine so I can't take credit for it but here might be a possible workaround:
1. Create two new Columns called Start Filter and End Filter. Make these columns Calculated Columns with formulas of [Start Time] and [End Time] respectively. The columns should be of the Date and Time\Date and Time type and should not be displayed on the Default View.
2. Click Advanced Settings and choose Yes to the question "Allow management of Content Types" in the Content Types section. Click OK.
3. Click on the Event Content Type. Open the two columns created in step 1 and select "hidden" for both of them. Click OK.
4. Back at the list settings create a new view or edit an existing view. When you get to the filter section choose "Show items only when the following is true" and select the following:
Start Filter
is less than or equal to
[Today]
And
End Filter
is greater than or equal to
[Today]
5. Click OK to save the view.
6. Open the List view web part that is displaying the recently changed calendar and change the view to the newly created or newly edited view. Click Apply, OK.
-Aseem Nayar
This posting is provided "AS IS" with no warranties, and confers no rights

How to list users under multiple groups and users sub groups

Hi, I am stump, which is not hard to do. i have a list of groups and i want to list the users in those groups and then in the next column lists all the citrix only groups for each user. hopefully im describing that correctly. Heres what i have but it is
not listing the users groups. I am not sure how to proceed.
$CurrentDate = Get-Date
$CurrentDate = $CurrentDate.ToString('MM-dd-yyyy_hh-mm-ss')
$Groupname = "Distribution Lists"
$excel = New-Object -comobject Excel.Application
$excel.visible = $True
$wbook = $excel.Workbooks.Add()
$wsheet = $wbook.Worksheets.Item(1)
$wsheet.Cells.Item(1,1) = "Groupname"
$wsheet.Cells.Item(1,2) = "Member"
$wsheet.Cells.Item(1,3) = "ACID"
$wsheet.Cells.Item(1,4) = "Department"
$range = $wsheet.UsedRange
$range.Interior.ColorIndex = 19
$range.Font.ColorIndex = 11
$range.Font.Bold = $True
$intRow = 2
$groups = get-adgroup -Filter * -properties * -Searchbase "OU=Citrix,OU=Permission,OU=Groups,OU=Home Office,OU=domain,DC=Domain,DC=com"
$targetFile = "c:\temp\$groupname $CurrentDate.csv"
Add-Content $targetFile "Group;Member;ACID;Department"
foreach ($group in $groups){
$groupMembers = get-adgroupmember $group -Recursive | Get-ADUser -Properties Department, DistinguishedName| Where-Object { $_.Enabled -eq 'True' } | Select-Object Name, samaccountname, department, distinguishedname, @{n='MemberOf';e={$_.MemberOf -replace '^cn=([^,]+).+$','$1' -join '; '}
foreach ($groupMember in $groupMembers){
$groupName = $group.Name
$memberName = $groupMember.Name
$acid = $groupMember.samaccountname
$groups = $usergroups
#$department = $groupMember.department
$department = $groupMember.memberof
#$DistinguishedName = $gropmember.distinguishedname
$line = "($groupName)--------($memberName)-----($acid)-------($department)------($usergroups)"
add-content $targetFile $line
$wsheet.Cells.Item($intRow,1) = $groupName
$wsheet.Cells.Item($intRow,2) = $memberName
$wsheet.Cells.Item($intRow,3) = $acid
$wsheet.Cells.Item($intRow,4) = $groups
$wsheet.Cells.Item($intRow,5) = $DistinguishedName
$intRow++
$WorkBook.EntureColumn.AutoFit()
$excel.SaveAs("DL" + "name.xlsx")
$excel.Close()

Hi Glacket,
Below codes should give you headsup.
This command will give you estimate the result count for each group:
PS C:\Users\Administrator> Get-ADGroup -Filter {Name -like "TestGroup*"} | Select Name, @{Expression={get-adgroupmember $_ -recursive | Measure | Select -ExpandProperty Count};Label="Count"}
Name Count
TestGroup1 7
TestGroup2 8
Note that as said earlier we are getting duplicated results(12,13,14) for users belonging to multiple groups. Result is in order as per earlier code's count and order.
Get-ADGroup -Filter {Name -like "TestGroup*"} | get-adgroupmember -recursive | Select Name,@{Expression={Get-ADPrincipalGroupMembership $_ | Select -ExpandProperty Name};Label="GroupMemberOfName"}
Name GroupMemberOfName
User100 {Domain Users, TestGroup1}
User14 {Domain Users, TestGroup1, TestGroup2}
User13 {Domain Users, TestGroup1, TestGroup2}
User12 {Domain Users, TestGroup1, TestGroup2}
User11 {Domain Users, TestGroup1}
User10 {Domain Users, TestGroup1}
User1 {Domain Users, TestGroup1}
User19 {Domain Users, TestGroup2}
User18 {Domain Users, TestGroup2}
User17 {Domain Users, TestGroup2}
User16 {Domain Users, TestGroup2}
User15 {Domain Users, TestGroup2}
User14 {Domain Users, TestGroup1, TestGroup2}
User13 {Domain Users, TestGroup1, TestGroup2}
User12 {Domain Users, TestGroup1, TestGroup2}
Use below to export to CSV:
Get-ADGroup -Filter {Name -like "TestGroup*"} | get-adgroupmember -recursive | Select Name,@{Expression={Get-ADPrincipalGroupMembership $_ | Select -ExpandProperty Name};Label="GroupMemberOfName"} | Export-Csv C:\ListGroups.csv
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

What is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

what is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

there is a workaround you can try, create audience and add DL to them and deal with the audience or convert DL to groups
https://social.technet.microsoft.com/Forums/en-US/02f0d773-8188-4d94-a448-0c04d838b0cf/distribution-lists-in-sharepoint?forum=sharepointgenerallegacy
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

Hey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages it only show imessage and message count )HELP)

ey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages it only show imessage and message count )HELP)

At the bottom of the page Settings > Messages you should have a section headed "SMS/MMS" Turn MMS messaging on then you can turn group message on.

Hi I do not want iTunes to open up automatically when I turn on my macbook pro. I tried going to System Preferences Users and Groups Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop.

Hi I do not want iTunes to open up automatically when I turn on my macbook pro. I tried going to System Preferences>Users and Groups>Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop. What should I do?

Hi r,
Make sure you close iTunes before shutdown. And you're quite welcome.

I am trying to stop programs from opening automatically when I turn my computer on. I tried system preferences users and groups login items...then I deleted them from the list but it did nothing.

I am trying to stop programs from opening automatically when I turn my computer on. I tried system preferences>users and groups>login items...then I deleted them itunes and emial from the list but it did nothing. They continue to open up every time I turn on my Macbook Pro.

Hi r,
It sounds like you're running Lion?
Have you tried running Verify and/or Repair Disk?
Have you tried running Repair Permissions?
Do you have at least 15% free space available on your HD?

Tasl list group and group counter

Similar Messages

Maybe you are looking for