Tasl list not coming in inspection lot

Hi i am facing one problem. I have creatd one inspection lot automatically from GR. Noq in the inspection lot in Inspection specification no task list assignment is coming. Also when i click on the tab Task List/Spec in inspection lot it is giving me message No inspection plan could be found. I am using inspection type 01 in matrial master ans usage in inspection type is 05, same usage type i am using in plan. I have assigned MIC in plan . Also in material amster the inspection with task list has been selectd. Sampling procedure i am using sampling type percentage % 10 %.
Can anyone tell me why this coming

Hi,
I have creatd one inspection lot automatically from GR. Noq in the inspection lot in Inspection specification no task list assignment is coming.
Please check whether you have ticked 'insp. with task list' at material master details for Inspection type.
Also when i click on the tab Task List/Spec in inspection lot it is giving me message No inspection plan could be found.
Please ensure that the quality plan is made on or prior to the date of GR, if lot is generated on 15.04.2010 then quality plan has to be made on that or before that date. If you make on 16.04.2010 system will not accept.
I am using inspection type 01 in matrial master ans usage in inspection type is 05, same usage type i am using in plan.
Please check that you have released the quality plan (selected 4 status) and plan is not block
I have assigned MIC in plan . Also in material amster the inspection with task list has been selectd.
Sampling procedure i am using sampling type percentage % 10 %.
No issue this is correct.
Please revert if issue is still not resolved.
Best Regards,
Shekhar

Similar Messages

Customer number not in the inspection lot for a make to order scenario

Hi All,
I know that standard SAP will get the Customer number into Insp. lot only for insp. types 10/11/12. I am wondering if someone know a way to get the customer no. into insp. lot for insp. type 04 where the material is make-to-order scenario and the Production/Process order has the Sales order and customer no. without activating User-exit. The quality users want to be able to see the customer no. in insp. lot without having them to go to process order.
It makes no sense to me why the customer no. is not brought into insp. lot when that is available in the Prod/process order, which can further be used to select the customer specific insp. plans for 04 insp. type Insp. lot without using Variant configuration.
Any light on this topic is appreciated.
Thanks.

Hi Srikant,
I guess.........
Normally the inspection lot refers the triggering document that are the trigger cause for them.
- Inspection type 01: - Purchase Order and GR material document.
- Inspection type 03: - Pro. Order Number
The same way...
The inspection type 10\11\12 are purely related to the SD, and directly integrates QM and SD. Hence in the inspection lot for the inspection types directly integrated to SD, it will furnish the Sales order number \ Customer.
But the inspection type 04 is purely have it's relation to Production process. So it will have the details related to integrations it has i.e. the "Pro. Order." Hence it integrates QM-PP, it have the data related to PP (Pro Order), not the SD's one.
But I think one way you can achieve it,
Assign the Customer number also to the inspection plan along with the Material. So I think at the time of assigning the inspection plan to the inspection lot, it will refer the Customer number also and will display the Customer number along with Task list Group\Group Counter, in the inspection specification screen in QA03/02
Regards,
Shyamal

Inspection type 03 - PP/PI not creating auto inspection lot

Hello Experts,
I've read the Best Practices for PP and QM master data, as well as the BPs for Creating and Completing inspection lots.
I have 03 activated for my inspection type usage.
When the PO is released, I am not seeing an auto inspection lot.
Please suggest the troubleshooting steps to solve this issue. Some are auto creating and some are not, but my QM MData is correct for inspections...
Thanks
Verroz

Hi Craig,
I guess 'Insp. Char. required' in control key flagged or not, does not affect Inspection lot creation.
I just checked for existing 03 inspection lots and we do not have this field flagged.
My understanding is also based on F1 help which states
In the following situations, consistency check for the task list generates a warning message:
if you set the indicator in the control key but have not maintained
inspection characteristics for the operation or phase
if you have not set the indicator in the control key but have maintained
inspection characteristics for the operation or phase
Or have I missed something here?
Amol.

QA16 not showing 03 inspection lot

Hi All ,
I am trying to make collective UD for 03 inspection type lots with QA16 . These lots contain long term MICs also . But when I am executing the tcode I am not able to see the lots in list for a particular material .
1. In QA16 , checkbox for "include long term mic" selected .
2. In RR , all results have been made and are with status 5 .
3. These inspection lots are related to inspection points .
Also when I execute QA40 , then these lots gets saved with the UD . Can anybody help why in QA16 , I am not able to see lots for this material .
Regards

Hi
Yes all results are passed . For one material its not showing the lots . Also for other materials lots with REL CALC status are also displayed in QA16 .

Material document not updated in inspection lot QALS table

HI
The inspection lot created for 04 inspection type during Goods Receipt.
The material document is appearing in the inspection lot but found not updated in table entries. i.e.., QALS -MBLNR
When i checked other inspection lots it was found updated. How this happened ?
Any Snote to be applied?
Thanks

Hi,
Check the number ranges for material documents. (with year) for document type WE in OMBT transaction code.
If same material document number repeats in the same calendar year,then document update will be terminated.
As, document no. will be already existing in tables, system won't allow to update the same no. again.
Thanks & Regards,
Anand.

BAPI_INSPOPER_RECORDRESULTS:result does not appear in inspection lot...

Hi,
I am using BAPI_INSPOPER_RECORDRESULTS to record inspection lot result at characteristic level.
When I use this BAPI, it does not give me an error.
But the values against each characteristic does not appear in the result field of that characteristic.These are not getting updated. system status shows INSP RREC.
I am passing the result value as "mean-value" field in bapi charresult table..
what is the solution for this?
I am trying BDC for the same purpose in tcode QE51N. but in between there is error msg promp..so BDC is not working after that promp as it is asking for user entry for the mandetory field "Engineer's name"..
Kindly provide the solution..

Hi,
maybe QE11 is an option for recording results vai BIM.
Cheers,
S>

Automatic Inspection lot not generated for Inspection lot origin 12

Hi all,
I am not able to trigger the automatic Inspection lot for General Delivery i.e Inspection lot origin 12.
The scenario is, I am creating the STO ( Inter company stock transfer) and against the same STO i am creating the delivery but after delivery inspection lot is not generated. In the material master correct inspection type is maintained also the mvt type 641 is active for QM. The inspection lot origin is assigned to the delivery type in the configuration but still i am not able to generate the inspection lot.
Please let me know i am missing something?
Regards

Hi,
You are missing 1 Config
Quality Management
Quality Inspection > Inspection Lot Processing > Inspection Lot Creation > Inspection at Shipping (Tcode OQL8)
mantain inspection origen agenist Delivery type u are using.
also you need to create Sales Info record(QV51)
I hope all other settings are OK then it should work
Edited by: Jayashankardm on Jan 6, 2010 9:59 PM

Sampling lot not reflecting in inspection Lot

Hi
We set up the QM master data (QI info- record / QI PLAN / QI Inspection / QI sampling schema / inspection chars / Dynamic modification rule etc..
The inspection lot was creating automatically . I coudn't find any samples in the inspection lot ( out of 50 - GR ,we are expecting 1 samples.
Why and how to correct it ?
Thanks , Any help will be highly appreciated
JJ

Hi
I assume you have sampling procedure which is assigned to all MIC in the inspection plan
Check the lot status? if if is CRTD
Check your inspection Plan Usage and Inspection type Usage
If both are same then your inspection will become REL when u make GR
sample size will be automatically calculated.
already created lots - QA02 just clickon sample --ur lot status will changed to REL
THanks
Sami

No inspection lot can be opened for this material error is coming during GR

dear friends,
no inspection lot can be opened for this material error is coming during GR. what is the cause for this and how to solve it. please suggest me
regards,
Krishna

Hi,
i think you have maintained the quality view and activated the inspection. but you have not created any inspection lot task list for the material and plant. thsi you can create through QP01 there maintain the material and plant. then enter in inspection plan give usage 5 and status 4. save it and try to check it with QA32 and see the lot. it should be released then only you can give usage decision.
regards,
Adwait Bachuwar

Why Inspection lot numbers are not in sequance?

Hi All,
In my business scenario I am creating inspection lot for inspection type 01. System does not create the inspection lot number in sequence for example if I do the GR system creates the inspection lot number say 1000000016, and after some time if I do the GR for the same PO and material I am getting the inspection lot number 1000000019, 25,35,175,225 like this? can some one let me know on this why this is happening? I checked in QALS table for the list. All created inspection lot numbers are not in sequence? Pls let me know
Thanks & Regards
Kundan

This has been asked and answered many times in the past. Please search the forum. Google before posting!
Please review this topic:
Inspection lot number ranges skipping
It has way more info in that topic than you probably ever want to know.
I have it on good authority that Craig is a very good consultant. And Isabelle is an SAP employee and also responded about the issue.
FF

Not able to see inspection lot in QA32

i did MIGO, but i could not see the inspection lot in QA32.so i checked it in MMBE.
there material is showing in Quality inspection stock.

Hi Sandeep,
Check the folowing points,
See date range, secondly select radio button as lots without UD in list setting,
or check your input parameters.
Reward points if useful.

Calibration process : inspection lot not created

Hello,
When creating a maintenance order (PM05) , i can not get the inspection lot created .
There has been some thread about this process , i believe i followed the instructions :
-equipment category is production ressource/tool
-master inspection characteristics created (released)
-sampling procedure created for PM
-equipment task list created with inspection point at header level , with control key including inspection characteristic , with master inspection characteristic , with sampling procedure
-configuration for inspection type and order type is done
then when creating the order manually (or via a maintenance plan) : the order is created and released but with no inspection lot assigned...
does anyone have an idea where the error might come from?
Thanks again,
Pete

Hi Pete
Weather this is correct or not for your scenario but please check the below spro setting.
Plant Maintenance and Customer Service --> Maintenance and Service Processing --> Functions and Settings for Order Types --> Assign Inspection Types to Maintenance/Service Order Types
click on the symbol
in Change view " Assign Inspection Types to Maintenance/Service Order Types" :Overview screen assign inspection type against plant and order type combination. for PM 14 is inspection type.
please confirm.
regds,
Venkat

QM-Inspection Lot Posting tab not found in QA32 -UD

Dear All,
I am not getting the Inspection Lot posting Tab in the QA 32 Usage Decision for the Inspection type -01.
various steps are as follows,
1. I raise the PO for the material, and release it.
2. received the material by MIGO against that PO.
3. I got the lot in QA 32.
4. I did Result recording, without any error.
5. In UD i accept the Lot.
6. But Now I am not getting the Inspection Lot posting Tab at UD screen.
How can , i Post the Lot .
Thanks and Regards,
Neeraj Singh

Hi Neeraj!!!
May be this can help you out. You please do the procedure as follows-
1) You get Worklist for inspection lots by QA32.
2) You plz select a single lot, go on inspection lot, inspection specification tab, press "task list specs". It will assign task list to your insp. lot.
3) Press "back" and press "Usage Decision", accept the lot in "UD code" box and give quantity in "inspe.lot stock".
4) Press "Save".
Now you have cleared your lot from Quality, So you wont be able to see this lot in QA32.
If your problem is other than this, kindly quote else....
cheers!!!!
kapil

Inspection lot not getting created

Dear MM guru's...
SUB: Quality inspection lot neot creating.
when i am do GIR, system is not creating Inspection lot for the material,
i have maintained the QM view in material master and assigned the inspection type aslo, then why system is not creating an Inspection lot for quality inspection, is there any extra settings need to be maintaied in QM.
Regards
SARFRAZ

There is a small check mark which says "active " for each inspection type you maintained in QM view .Make sure you have checked this .If you have not ,then there is no way a lot will be created .
Please let me know on any furthur doubts coz as far as i know this is a common mistake every person new to QM does .If this not the issue then get back to me .
regards
Naik

Inspection lot not creating

We have two - three inspection type . i.e need to be assigned in the material master .
which setting i need to adopt in the selection and the prefered inspection type ?
if we have multiple inspection plan for a single material , is it possible to create inspection lot automatically ?
Right now i am not getting any inspection lot , what will be possible trouble shooting ?
Thanks
JJ

Dear JJ
If you have maintained inspection type of different origin in the material master you need tick any of the preferred indicators. for 01, 08 inspection lot is created automaticaly. if the inspection type are of same origin like , 01, 0101, 0102 etc the prefered indicator is used
Let me know for which process you are not getting inspection lot
Regards
gajesh

Tasl list not coming in inspection lot

Similar Messages

Maybe you are looking for