Tastatur multimedia keys, only pause, play does'nt work

Hi everybody,
i hope u can help me. My apple tastatur works fine, but the multimedia keys pause, play, next title doenst work - the other keys are working. I reseted and reconnected the tastatur without reason.
any idea for me?
thx for help
Tom

Hi KalvinKlein,
before I received your new Info about Fn+Insert , I had once more checked Fn-F7 : no effect in the BIOS.
I have also tried all non-character keys plus the "Umlaute"-keys on the German keyboard with the following result:
The key right of the "0" shifts boot device entries down in the list.
On the German keyboard this key is labelled with " ß ? \ ".
The next key on the right and left of the "Backward-Erase"-key, labelled with " ´ ` ",
pressed together with the Shift-key, moves list entries up.
Using these keys I have then set the Boot device sequence according to your suggestion :
1: USB CDROM
2: USB HDD
3: HDD
My USB-Memory stick (with BartPE installed) had been recognized as a USB HDD.
After saving with F10 and <Return> the Netbook responded with a Beep and nothing further happened.
I had to switch it off with a long press on the Power Button.
Switched on again, <F2> pressed, BIOS checked,, o.k. <ESC>,
loads Ramdisk image of BartPE from the USB-stick,
starts BartPE with XPE.
Checking available drives in the Windows Explorer resulted in :
RAMDISK ( "B:" )                (used by BartPE for temporary storage)
USB ("C:")                        (the USB-stick with the BartPE-iso file)
"Wechseldatenträger / Removable storage device"           obviously refers to an unused USB-Port
-volid ("X:") "CD-drive"    but actually another Ramdisk containing the expanded and running BartPE package
The internal harddisk is not visible !
I wonder whether this is a problem of the BIOS or whether I require special harddisk drivers (Intel Matrix Storage manager/driver or possibly AHCP drivers) for Windows XP, because my present BartPE version is based on XP, while the Netbook came with Windows 7 Starter Edition.
Further helpful hints would very much appreciated.
Kind regards

Similar Messages

My Bose SIE2i volume control does not work. (pause/play does work). This is the secone set - the apple store in Sydney replaced the firsat set that had the same problem. It was working OK and has stopped.

My Bose SIE2i volume control does not work. (pause/play does work). This is the second set - the apple store in Sydney replaced the first set that had the same problem. It was working OK and has stopped.

Thanks again V.K. I did check the layout, and it was listed as alphabet when I inputted the password. So that doesn't seems to the the issue.
Just finished a truly mystifying experiment, but I put in a shorter password in the way mentioned earlier and it worked. I then systematically kept increasing the characters of that password and it seems that if the password starts to exceed about 16, it stops recognizing it. I am fairly sure it is not the password itself since it never gives an error when typing in the verification password. So unless I systematically make the exact mistake twice at the setup screen, and then don't or make a different mistake every time at the login screen, I don't think its my typing skill.
So problem solved for now, but I am still a bit worried. Maybe I should completely reinstall and use a shorter password.
Is there supposed to be a length limit?

Itunes does not open,everytime i try it says "The itunes application could not be opened. The required folder cannot be found" I have tried the shift key option but that does not work. help!!

I cannot open itunes. Everytime i try it says "The itunes application could not be opened.The folder cannot be found." I have tried the shift key option but this does not work. Please help.!!

Try the actions here for that driver.
iOS: Device not recognized in iTunes for Windows
I would first do this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Convenience Key on my Torch does not work

Hi Everyone!
Seek your help as the convenience key on my torch does not work. I have changed the setting as well but to no avail.
Regards - Nitin
Solved!
Go to Solution.

Hi just an update to the problem of the convenience key not working or working now and again. I had to do a couple of reboots this morning to update some apps and I noticed the key was not working after the reboot so I attached the charging cable to the phone and plugged into the wall socket thinking that will fix it again, but no it didnt. !!! I then remembered the first time I had this sorted I had plugged the charger in and switched the power on and then attached the phone, so I tried this method again and the key is working fine again!!!!. So what ever is happening when you do it in this sequence seems to reset the key. How did you get on with your phone with the Blackberry info?

Allowing the Pause / Play buttons to work with VLC player

I would like to use my pause / play buttons when I am using VLC player. I use VLC player to watch many movies, but I still use iTunes to play music, so I was wondering if there was a way to switch which application my play / pause button controls. Right now, even if VLC player is open it will only control iTunes.
Thanks,
Travis

Under VLC preferences look for the options "Control with media keys" and "...when VLC is in background".

Pause/Play functionality not working with publish to HTML5

Hi experts,
I am creating a Captivate course to be deployed on iOS and publishing to HTML5. We are using custom buttons (not playback controls) for navigation to advance through the slides. My client would also like Play/Pause functionality for some of our embedded (MP4) videos. I used the following tutorial to create these buttons to toggle the Play & Pause functionality:
http://www.youtube.com/watch?v=0v2F0NyEAfs
This worked PERFECTLY when previewed in a browser from Captivate, but does not work when published and launched in HTML5 format, from the same browser. I didn't use any Flash content, rollover functionalities, or anything noted in the limitations list for HTML5 output. The conditional functions I have set for my buttons are:
PAUSE:
Hide > SPI_Pause
Show > SPI_Play
Assign > cpCmndResume with 0
Assign > cpCmndPause with 1
PLAY:
Assign > cpCmndPause with 0
Assign > cpCmndRsume with 1
Hide > SPI_Play
Show > SPI_Pause
The issue I am encountering is that the video completely pauses itself the moment the pause button displays on the stage (no matter where I place it in the timeline). I'm not pressing it or anything, it just initiates the cpCmndPause function and disregards all the others I have set. From there the conditional sequences are rendered useless as the video is already paused even though I didn't press the button. I've verified this happens anywhere I try to use the cpCmndPause function.
I am running Captivate 6.1.0.309 on Mac OSX 10.8.2. I've tested the HTML5 output in Chrome and Safari with the same results. I did see a thread regarding a patch install (for 6.0.1xxx) that resolved some issues, but this appears to be an earlier version of what I have installed so this should have been resolved with my install?
Please HELP!

So, was this issue NOT resolved with the patch, or is this an entirely new/different issue?
It seems as though this functionality is pretty basic, so I don't understand why this is a restriction with HTML5 output? Please advise, if there are restrictions with advanced actions that are not noted in the HTML5 limitations documentation, then they should be.
Thank you, I too have a client deadline and have purchased this subscription based on the documentation Adobe has provided about the application's ability to publish to this new format.

Number 2 key on numeric keypad does not work. All other keys work properly.

The number 2 on the numeric keypad does not work. Is there some way to clean it? If not how do I go about ordering another keyboard?

inside the remote there is a micro switch for each direction each can break
so yeah you could be the first who write about the right arrow key microswitch being broke in your atv

The shortcut key of comment lines does not work

In SAP NetWeaver 04s,the shortcut key of comment lines (CTRL + \ and CTRL + SHIFT + \)does not work in the abap new editor
Message was edited by: ming yu

Thank you again for your suggestions. I deleted the Skype application, but the "Phone" application continues not working. The version of the software that I have is 2.2, and i was told that I cannot update it to the last version, as my iPhone would be blocked doing so
Therefore, following your recommendations, I resseted several times the iPhone, but nothing improved. Thank you anyway for taking your time trying to help me with your suggestions. Josep

My play count (& last played) does not work after itunes 11

I've read many posts claiming if you turn off crossfading that you can repair the new play couny/last playedt problem in itunes 11. That does not work for me ( I have never turned on the crossfading ever ).
Now when I listen to my audio books on a shuffle (has no screen), I can't see what chapters I have already listened to (when I plug my ipod back into my desktop).
Any other advice?
Kate

Apple needs to recognize this issues immediately, I'm a huge fan of Apple products like paulgarb said, it's a good product cause it works, every tv and mobile device in my home are linked because of homesharing, but now it does not work with no seemingly simple solution to solve the issue anywhere in site. I have always stood by Apple products and always recommend them, however I hope I did not put my foot in my mouth, my father has just spent a good amount of time scanning old family pictures and now he wishes to share them on his tv, tried multiple solutions for him with the devices he already has, none would work (ie streaming through googletv, ps3...) so I told him the simple solution is to just get an appletv for $99, he said fine get it for me for Christmas, usually I have a hard tie getting a gift for him, but now I finally have an opportunity to get him a gift I know he wants, but with homesharing issue apple has yet to acknowledge I feel appletv might be a moot point for him. Im praying that my father has not update his itunes yet. It would a great gift if apple could acknowledge the issue and fix it before the 25th.

Text entry boxes in CP6 - Enter key to validate input does not work in Safari?

I'm using Captivate 6 to create a step by step walkthrough of some different processes that are commonly completed in my workplace. Some of the example processes have portions where text is entered to simulate a process the end user might need. I have text entry boxes in these slides that require validation of the input to move along, with Enter used as a shortcut key. This works great in Firefox, Chrome and IE all the way down to 8....but if the course is run in Safari, the enter key does nothing. Is this a known issue?
Additional info: For many of these text entry boxes, the point is that it is a search field that has a little binoculars icon next to it that executes the search in the actual software we are simulating. For these slides I actually have the submit button associated with the text box made invisible (no fill, no stroke) and placed on top of the binoculars icon. This is an acceptable method of doing the task we're demonstrating, and just so happens to be a workaround for the enter key not working in Safari. However, a few places we have text entry that doesn't have the search/binocular icon next to it because there is a different goal on that section of the software we're visualizing. In those cases, there is no place for me to put an invisible submit button, and I can't make the submit button visible because that's not how the software we're demonstrating would work (thus defeating the purpose of the training).

Sorry, this is a known bug with no fix available yet, but the makers of SwiftKey are aware of it and we will work with them to fix it: https://bugzilla.mozilla.org/show_bug.cgi?id=617298
For now, the only solution is to use a different keyboard when using Firefox.

Auto play does not work

Hi
I have a CP4 project where the first slide is a PowerPoint slide that contains an animation (see attached). I set the project start option preference to Auto Play, however it does not start playing the movie. I must click the play button in order to activate the movie. Does Auto Play not work with animated PowerPoint slides? Minka

Hi again
I believe you are referring to PowerPoint options. I'm referring to Captivate. When you look at the slides in Captivate, do you see Click Box objects? Look at the Captivate timeline.
If you see Click Box objects, you may need to adjust them. If you want the project just to play straight through, double-click a Click Box and configure it so there is no pause. Look at the Options tab to find the pause bit. Configure with no pause then use the "Apply to all" check box you should find in the lower left corner. Ensure you are applying to all slides and click OK.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Product key for volume license does not work

Hi,
My organization has a MS volume license and I want to install MS Office 2010 Standard SP1 32bit on another computer. I downloaded the software, installed it and then went as instructed to the start menu to launch the program and received a window asking
to enter a Product Key. I enter the key and then receive a message saying it is not a valid office product key. MS phone help confirmed that it is a valid key but then said they would need to charge over $200 to resolve the problem, more than the cost a new
license.
Thanks,
Kevin

MS Office Standard is a Volume Licensing product - VL products do NOT prompt for a product key.
You can't download VL products from the public internet - only download via the VL customer logon portal (VLSC).
You can't convert a Retail Office product into a VL product.
You will need to obtain the installation source files/media/disc, from the licensing contact/controller in your organisation. (who will obtain it from the VLSC)
If you are the VLSC licensing contact/controller for your organisation, you have downloaded the wrong product.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

W8: Key combination Fn + F6 does not work

Hello,
I am little bit frustrated with W8 on my T430s. The issue (not the first) is that when I use key combination Fn+F6 it tells me this:
"This key combination opens the Lenovo Settings program. You do not have the Lenovo Settings installed on your computer. To launch the program using this key combination, install the program first."
I am sure that Lenovo Settings Dependency package is installed in the latest version but key combination still do not work.
Thank you for your advices.
Petr

Hey there petr_drda,
With your T430s did you upgrade to Windows 8 or what it shipped with Windows 8 OEM?
Only machines that were shipped with Windows 8 OEM currently have the Lenovo Settings App itself. The dependency package is the backend of this App that allows it to work. Those who have upgraded to Windows 8 do not currently have access to this app.
What I have seen on another thread: "We are still working with Microsoft to make the Lenovo Settings app generally available to all users from the Windows Store. It's not quite ready yet. When it is, I'll post here." posted by someotherguy.
If your machine was Windows 8 OEM, you may need to go into the Windows Metro App Store and download the Lenovo Settings App to your machine. I hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

AS3 sound pause/play buttons not working

I have three buttons:play_btn, pause_btn; and stop_btn within a movie clip labeled controller.
I can't make the play button start where the pause button is left. Everytime, the sounds starts from the beginning.
Please help!
var mySoundReq65:URLRequest = new URLRequest("sounds/pronouns.mp3");
var mySound65:Sound = new Sound();
var mySoundChannel65:SoundChannel = new SoundChannel();
var lastPosition:uint= 0;
var isPlaying:Boolean = new Boolean();
var isPaused:Boolean= new Boolean();
mySound65.load(mySoundReq65);
controller.play_btn.addEventListener(MouseEvent. CLICK, playSound);
controller.pause_btn.addEventListener(MouseEvent. CLICK, pauseSound);
controller.stop_btn.addEventListener(MouseEvent. CLICK, stopSound);
// play sound
function playSound(event:MouseEvent): void{
if(!isPlaying){
mySoundChannel65 = mySound65.play();
if(isPaused) {
lastPosition=Math.floor(mySoundChannel65.position);
mySoundChannel65 = mySound65.play(lastPosition);
isPlaying=true;
// pause sound
function pauseSound(event:MouseEvent): void{
if(isPlaying)
lastPosition=Math.floor(mySoundChannel65.position);
mySoundChannel65.stop();
isPlaying=false;
isPaused=false;
else if (isPaused){
mySoundChannel65=mySound65.play();
isPlaying=true;
isPaused=false;
// stop sound
function stopSound(event:MouseEvent): void{
SoundMixer.stopAll();
lastPosition=0;
mySoundChannel65.stop();
isPlaying=false;
Thanks in advance for any help.

Kglad:
Thanks for replying again. I fixed my script and it's working fine now. The final script is as follows:
var mySound65:Sound = new Sound();
var mySoundChannel65:SoundChannel = new SoundChannel();
var lastPosition:Number= 0;
mySound65.load(new URLRequest("sounds/pronouns.mp3"));
var isPlaying:Boolean = new Boolean();
controller.play_btn.addEventListener(MouseEvent. CLICK, playSound);
controller.pause_btn.addEventListener(MouseEvent. CLICK, pauseSound);
controller.stop_btn.addEventListener(MouseEvent. CLICK, stopSound);
// play sound
function playSound(event:MouseEvent): void{
if(!isPlaying){
mySoundChannel65 = mySound65.play();
isPlaying=true;
if(lastPosition>0) {
mySoundChannel65 = mySound65.play(lastPosition);
controller.play_btn.visible=false;
controller.pause_btn.visible=true;
// pause sound
function pauseSound(event:MouseEvent): void{
lastPosition = mySoundChannel65.position;
mySoundChannel65.stop();
controller.play_btn.visible=true;
controller.pause_btn.visible=false;
// stop sound
function stopSound(event:MouseEvent): void{
SoundMixer.stopAll();
lastPosition=0;
mySoundChannel65.stop();
isPlaying=false;
controller.play_btn.visible=true;
I added a couple of things:
a) To avoid clicking the same button more than once, I made either pause or play button invisible.
b) The solution was to include the following conditional in the play button:
if(lastPosition>0) {
mySoundChannel65 = mySound65.play(lastPosition);
Thanks again!

IPad 1 - Deleted app, tried to reinstall, but later version is only available which does not work on iOS5. How do I get the original back?

Deleted App on my iPad 1. Tried to reinstall - but app has been updated and only works on iOS6 now.
Have gone to app store and looked under "purchased", again only the updated app is available which doesn't work on my device.
How do I get back the original version which worked on the earlier version of iOS?
I do not have a copy of the app in iCloud.
Thanks

The only possible way that you could get it back is if the app is still in your iTunes library. If you don't sync with iTunes and it is not in your iTunes library, unfortunately, your version of the app is gone now.

Tastatur multimedia keys, only pause, play does'nt work

Similar Messages

Maybe you are looking for