Tastatur oder Tastaturco​ver für Yoga2 Pro 13"

Hallo zusammen,
kennt jemand von euch eine Passende Tastatur für das Yoga2 Pro 13" ?
Am besten eine Tastatur die auch als Cover, das Display schützt.
Finde leider keines.
Herzlichen Dank.

Hallo, du findest keine weil es für das Yoga Tablet 2 Pro keine passende gibt....weder von Lenovo, noch von einem Drittanbietern....ich habe mir eine Ultraslim Tastatur mit Schutztasche bei Amazon bestellt und gut ist.

Similar Messages

  • Yoga2 Pro key repeat

    Anyone else experience intermittent key repeats when typing on the Yoga2 Pro?  Every 1-2 sentences I will get double characters on one letter or another, or a double <Enter>.  Adjusting the key repetition threshold in Windows didn't seem to make much difference.  

    This happens to me quite frequently, especially with comma,, period, and the N key.. (SIC, the duplications in the previous sentence were not intentional, but I DID intentionally leave them in place whereas I would typically correct them elsewhere)
    SO, this is a known issue. Is a solution kknown? (sic, again)
    Thanks,
    Ari

  • MS-6309 Ver 5.0 (694T Pro) with 1GB RAM

    I just got MS-6309 Ver 5.0 (694T Pro) to replace old one.
    Everything works fine except when I am using 2 X 512MB RAM. The system work well with eiather one of them but data get corrupted when both are in use.
    It happens with Windows XP Pro and Win98SE as well.
    Any suggestions how to solve this problem?

    98 se does not like over 512 mb unless messed with
    http://www.techadvice.com/specs/answer.asp?aid=182
    are they same make and model

  • Lenovo Yoga2 Pro Reparaturbericht - leider bin auch ich in der "Medionfalle"

    Hallo Leidensgenossen ;-)
    Ich hatte nach den ganzen Horrorstories der Reparaturen durch Medion sehr gehofft, dass ich nicht betroffen sein werde, aber leider hat es mich jetzt auch erwischt.
    - Im Februar Lenovo Yoga 2 Pro für satte 1400Euro gekauft.
    - Im Mai war dann der G-Sensor defekt und das Ultrabook drehte den Bildschirm nicht mehr selber. Ausserdem hat das Touchpad/Mouse immer wieder mal Aussetzer.
    Da ich aber wie gesagt die Horrorstories hier gelesen hab und auch ohne Sensorprima Leben/arbeiten kann, hab ich mal lieber aufs Reparieren verzichtet. Ausserdem brauch ich das Ultrabook zum Arbeiten.
    - Als dann einen Monat später ein Lüfter komische Geräusche machte, hab ich schon mehr die Zähne zusammen beißen müssen, aber da er das nur für ein paar Minuten nach dem Einschalten machte, hab ich immer noch nichts unternommen.
    - vor zwei Wochen ist dann ein Lautsprecher ausgefallen und jetzt war es dann wohl an der Zeit, dass uch durch das Reparaturmartyrium durch muss.
    - Am 21.07 hab ich es an Medion eingeschickt.
    - Am 23.07 kam eine Mail, dass es dort angekommen ist.
    - Heute, am 28.07 kam eine Mail mit Kostenvoranschlag!!! 68Euro für einen neuen Rahmen inkl. "Laborarbeiten"
    Auf dem KV stehen Thermal Module, Sensorboard und Speaker aber immerhin als Garantiearbeiten.
    Das Ultrabook war von aussen in einem fehlerfreien Zustand! Ich Idiot hab allerdings leider keine Fotos gemacht.
    Ein Anruf bei Medion kommt bei 1,29/Minute nicht in Frage, also hab ich gerade mit einem recht freundlichen Herrn auf der Lenovo Hotline (die 0180er Nr) gesprochen.
    Der sagte natürlich er könne nix machen- war ja klar.
    Ich sollte Mefion schreiben, dass ich eine Reparatur des Rahmens ablehne und Sie mir Fotos von dem Schadenschicken sollen.
    Das hab ich jetzt dann gemacht...
    Ich halte Euch auf dem Laufenden.
    Lieben Gruß,
    Oliver

    Leider geht es dann hier weiter mit berichten. Denn nach gestern Abend ist tatsächlich klar:Das Yoga 2 kam mit einem neuen Defekt aus der Reparatur zurück. Und zwar denkt das Ultrabook, dass das Netzteil angeschlossen ist, auch wenn es abgezogen ist.Es glaubt also immer am Netz zu hängen. Im ausgeschalteten Zustand am gelben Lämpchen zu erkennen (neben dem Netzschalter) und im Betrieb am Stromkabel Symbol neben der Batterie.Da steht dann "...% verbleiben. Netzbetrieb (wird nicht aaufgeladen.)" Jetzt ist natürlich die groooooße Frage:Schadet das dem Ultrabook oder dem Akku???Also sollte ich das Yoga 2 direkt wieder zu Medion schicken oder lieber wieder warten (und  weiter arbeiten, denn dafür hab ich es ja gekauft!!!), bis ein zweiter/dritter Fehler dazu auftritt, damit es "sich wieder lohnt", wie beim ersten Mal.Ich tendiere natürlich zu Letzterem, will aber auch nicht, dass der Akku leidet, denn der wird ja bekanntlich nur SEHR ungern auf Garantie ersetzt. Und ein nicht funktionierender Akku macht ja keinen Sinn. Es scheint auf jeden Fall so, also würde sich der Akku dadurch schneller entladen. Ich beobachte das jetzt die nächsten paar Tage. Irgendwelche Tipps irgendwer?Danke und Gruß

  • Kann man auf einem MacBook Air (8GB RAM) flüssig mit Photoshop und InDesign CS4 arbeiten? Oder dann doch lieber das MacBook Pro?

    Es sind nicht nur einfache Bildbearbeitungen gemeint sondern auch das ein oder andere anspruchsvollere Projekt. (große Plakate, Filter, Effekte etc)

    Vielen Dank für deine Antwort!
    Ich habe es versucht aber leider noch immer das selbe Ergebnis .
    Nun ja ich meinte die neuste Version von CS6 aber inzwischen habe ich mir
    mal die Testversion von CC runtergeladen um zu schauen ob da dieser Fehler auch vorhanden ist
    und Ja auch dort ist es genau so wie in CS6. Wie es ausschaut scheint Photoshop bzw.
    die Adobe Programme noch nicht wirklich auf Retina zu laufen. Schade eigentlich.

  • Yoga2 Pro Bios Update Difference?

    Can anyone who owns Y2P talk about the performance difference or I should say the improvements after the Bios update? Are you satisfied with the update?
    Thank you!

    Well atm I'm having problems with my DVD-drive giving me DMA errors whenever I'm trying to burn a DVD. I've looked into the matter and nothing seems to be helping so I thought of updating the BIOS.
    Even though a BIOS update might not help with my current problem, I'm still interested to know whether it is possible to update BIOS from 7.3 to 8.e.
    I read from somewhere that this was not adviced because 8.x versions are meant for X58 PRO SLI
    MSI automatic updating also didn't even suggest any updates for my BIOS. I know not to flash from MSI LiveUpdate, I just ran it to check for updates.

  • Yoga2 Pro - how to use tablet as a projector connected with laptop

    Hi, I have film on DVD and I would like to display it (via tablet's projector). I inserted DVD into laptop, connected laptop with tablet (via usb cable) and start projecting on my tablet but it does'nt work. How shoud I configure tablet/laptop to see film on the wall? Best Regardskolodpi3

    Pictures worth a thousand words and stuff:
    http://bj.angeltowns.com/images/log_cs.jpg
    Here I've disconnected the physical input object from the sequencer object (called "to recording & thru")
    I've created a channel splitter object, and cabled the physical input object to it. I'm now in the process of option-clicking the channel splitter's output cables (one for each MIDI channel) - ()option-clicking the output cables is a shortcut way to cable to objects on different layers) - and selecting channel 1 (and thus cable 1) to go to Audio Instrument 1, channel 2 (cable 2) to Audio Instrument 2 etc.
    So the MIDI comes in to Logic, gets split into individual channels, and each channel goes to it's own audio instrument via a cable, which you can put any plugins on.
    You can't record into Logic this way now, as we've bypassed the sequencer, but I think you need it simple at this stage

  • Yoga2 Pro - how to use tablet as a projector connected with TV decoder via hdmi cable?

    Hi, My TV is broken and I would like to use my tablet as projector connected via HDMI cable from TV decoder to my tablet. What should I do? How to configure and which apllication I should use?

    You will need to choose the correct (Input) on the TV for the MacBook.....say your cable box is set to HDMI !.....and your MacBook is on HDMI 2.....you will need to select HDMI 2 from the TV's menu for the signal from the MacBook to show on the TV screen.......the selection choices are examples as I do not know exactly how you have things connected......

  • FROM Adobe Premiere Pro CC 2014.2 support TO Adobe Premiere Pro CC ver. 7?

    My friend just sent me a PROJECT FILE from the latest ver of Adobe Premiere Pro CC, which is 2014.2, and I opened it to the old version of Adobe Premiere Pro CC, which is ver. 7. An error message pop up and it said that it cant be open cuz its a newer version. How can I open the project file he sent me to my old version of Adobe Premiere Pro CC?

    I was behind on an update! Never mind LOL!

  • USB Tastatur und Maus bei Installation

    Beim Installierten von Windows 7, für anspruchsvolle Schul Programme, auf einem MAC PRO 2.1 werden Tastatur und Maus nicht erkannt. Installieren tue ich mit Hilfe von Bootcamp. Beim Neustart, bevor die Installation überhaupt angefangen hat, soll ich das Laufwerk auswählen in welchem sich die Installation DVD befindet, wobei ich nur ein Laufwerk habe und bei dieser Auswahl wird keine Tastatur oder Maus erkannt.
    Danke schon mal im Voraus.
    MFG xXTiger2Xx

    Make certain that the keyboard and mouse are plugged directly into a USB port on the computer chassis, NOT on a USB port on a Display or other USB Hub.
    Only the USB ports on the computer Chassis can be seen immediately at Startup.
    Nur um sicher zu sein - Tastatur und Maus sind wirklich direkt am Rechner angeschlossen und nicht an einem USB Port am Bildschirm oder der Tastatur? Nur was direkt am Rechner angeschlossen ist, wird beim Neustart gesehen.

  • Need win 8.1 installati​on from disk on yoga 2 pro instructio​ns

    I need "idiot-proof" instructions (I'm quite technical, but believe in clear instructions) for reinstalling win 8.1 on my yoga2 pro.  My Windows Update stopped functioning during an update cycle and it would not repair during restore/reset.  I have the four installation CD's from a problem Lenovo created earlier (i.e., it was free) and have istalled it before.  I just don't remember how to get to everything (BIOS) and what settings.

    I did try removig the Lenovo energy management software, but that didn't work. I also then reinstalled and tried setting it to Performance mode. However, I didn't look for a Windows power mgmt solution.
    What's weird is that after I powered down and used the Novo button to check the BIOS version (just to confirm what I said earlier), when I restarted Windows again I did not see the Hyper-V error message. I haven't restarted again, but will check again tomorrow morning when Windows starts again.

  • Touchpad left and right clicks don't work on Yoga 2 pro

    Hi,
    I just bought a a yoga 2 pro. After setting up, I found that the two bottom keys, left and right keys on the trackpad do not work. Double tap also doesn't work. I reinstall the touchpad driver to no avail. Other gestures on the touchpad work fine, single tap registers as left click, two finger scroll also works. Also, when I use a blue tooth mouse, left and right key works fine.
    I am not sure if this is a hardware problem as when I swipe on the area of the two bottom keys, they register the movement. Just not click. Anyone can help me?

    Hello,
    I've had a Yoga2 Pro now for six months or so.  Just recently the left click stopped working correctly.  What I notice is that when holding down the left click button on the touch pad, and I try to drag a slider (like a volume slider or to drag a selection box or to drag a scroll box on a page, or to highlight text) and it stops holding down the click.  Sometimes it works, sometimes it keeps stopping.  
    Now, the right click is malfunctioning as well.  I press right click on something like an image, and nothing happens.  I have to right click on something 2-10 times now for it to register that I'm right clicking.
    Also, should I be able to tap the touchpad with two fingers and have that be a right click, or am I just reading that I should be able to do that on the screen (which  can)?
    I have downloaded the drivers for the y2p touchpad and the y2-13 and the generic ones from the synaptics webpage, but before I uninstall my drivers and try to install those, I want to be sure that is the correct and only possible fix.  I'm hoping its not a hardware malfunction.  I am running Win 8.1.
    Thank you.

  • Yoga 2 Pro Can't install windows Updates

    I love everything about my yoga2 pro, except, when I got it I installed a win 8.1 upgrade because windows told me to. everything seemed to be fine.
    after that, the system asked me to install another upgrade. when trying to install that one it said it could not install and was undoing the changes. I read some forums awhile back and it talked about a particular update that needed to be uninstalled before you could proceed. I tried to do that, but it wouldn't let me uninstall the initial 8.1 that i installed.
    i kinda let it go because it was asking me like every month or so to automatically shut me down and iinstall updates. But now it forces me to install updates every two days and then can't update so, it undoes it changes and it takes like 30-45 minutes or so. Plus, i do need to get it to be able to accept the updates at some point.
    I'm thinking I have to wipe everything and start from scratch??
    What should I do? And I'm certain that I didn't provide enough info to get assistance. What other info do you need to know to help me out.
    Thanks,
    Mike
    Solved!
    Go to Solution.

    This sounds more like a generic Windows issue than a specific one for the Y2P. That being said have you tried the Windows Update troubleshooting tool?
    http://support2.microsoft.com/gp/windows-update-issues/en-gb
    If that doesn't find anything then you can reset windows update per the following (there is a "fixit" for windows 8.1)
    http://support2.microsoft.com/kb/971058

  • Adobe Pro 8.2.6/Win7/64 won't open this pdf

    The pdf file is a state road map, and is located here:
    http://http://www.iowadot.gov/maps//msp/pdf/transmap.html
    I know the reader ver 10 (X) under win/xp will open it, but trying to open it under win7/64 using Adobe Pro 8.2.6, I'll get the following message:
    "Acrobat cannot decrypt this doc".
    I also know that the READER 8.2.6 running under win xp will not open this pdf either, as I get the same message as above.
    Any ideas?

    But as stated above, the file won't open under Adobe READER 8.2.6 running in Win-xp either.
    Something tells me my old ver 8.2.6 Pro is about history, as I've never had any problems running the Pro ver 8.2.6 under Win7/64 on my desktop.
    The laptop running Win-xp & Reader ver 8.2.6 won't open the file, but installing reader ver X on the laptop will. Looks like my old ver of Pro on the desktop has run it's course.

  • De Mac mini a Mac Pro

    Bonjour à tous et toutes,
    Comment transferer les données et applications de mon mac mini vers mon nouveau mac pro.

    http://support.apple.com/kb/HT4889?viewlocale=fr_FR
    OS X : migration de données à partir d’un autre ordinateur Mac exécutant Mountain Lion ou version antérieure

Maybe you are looking for

  • RFC logon failed with message: Failed: Connect to SAP  gateway failed

    I installed CI instance fine and i am stopped here with this error at the end of DB instance install. Could someone let me know what could  be the reason for this. Is there any fix or workaround to continue the install. INFO       2006-09-16 01:13:02

  • Enhanced photos missing!

    I imported, enhanced and titled a batch of photos. I attempted to upload them to a website. I brought up my photos from the Finder but ONLY the original, unenhanced, untitled photos exist (besides the thumbnails). In iPhoto, the photos in question ar

  • More loopy questions

    First- will gb3 allow me to set a region to cycle but play a few measures before it leads up to it....or will it only play the cycle from beg to end. I can't seem to start the cycle from any point but the beginning that is specified? Next- I noticed

  • How Come My Transitions End Up As Black Frame?

    So Im working with 1920 x 1080 Sony EX1 footage and when I export it as movie my transitions like dissolve, fade in fade out end up as a flash of black. When I changed my export settings to pixel aspect ratio to square it worked but the film ended up

  • I cannot share my work on final cut  pro x

    Hi.I recently edited a lenghty clip in fpx and there are no effects in it. (1 hour and 40 mins). Its all basic video filmed at 24fps and consists of some titles that I placed in. The red line above the timelime does not seem to go and its always ther