Tata Photon is not working on user mode

Hi Professionals,
I've an issue with running Tata Photon + on user login, whenever I open the photon application its asking Administrator credentials to run the program. Is there any remedy to solve the issue and run the program without Admin credentials??
Please help me..
Thanks..

Hi AriGM ,
Are you logon with an administrator account ？
If we logon as a standard account ,I am afraid we cannot run it without the administrator credentials .It is related to the UAC (User Account Control )It is necessary to distinguish the standard account with the administrator account to ensure the safety
of the whole system .The administrator take full control of the system and the standard user is in a limited environment .
Here is a link for reference:
What is User Account Control?
http://windows.microsoft.com/en-hk/windows/what-is-user-account-control#1TC=windows-7
Best regards

Similar Messages

Input Textfields not working in fullscreen mode

Input Textfields not working in fullscreen mode any one help me.

Quotes from Adobe:
"Users cannot enter text in text input fields while in full-screen mode. All keyboard input and key-related ActionScript is disabled while in full-screen mode, with the exception of the keyboard shortcuts that take the viewer out of full-screen mode."
Check with this article to know more: http://www.adobe.com/devnet/flashplayer/articles/full_screen_mode.html

Xmms not work as user

My xmms does not work as user, but works as root. I give permissions for users in devfsd.conf, but when I klick to play file it does not pick up the file. The file name does not appear in the window. With Mplayer is does the same. What is the problem?

her is my devfsd.conf:
# Richard Gooch <[email protected]> 17-FEB-2002
# Enable full compatibility mode for old device names. You may comment these
# out if you don't use the old device names. Make sure you know what you're
# doing!
REGISTER .* MKOLDCOMPAT
UNREGISTER .* RMOLDCOMPAT
# You may comment out the above and uncomment the following if you've
# configured your system to use the original "new" devfs names or the really
# new names
#REGISTER ^vc/ MKOLDCOMPAT
#UNREGISTER ^vc/ RMOLDCOMPAT
#REGISTER ^pty/ MKOLDCOMPAT
#UNREGISTER ^pty/ RMOLDCOMPAT
#REGISTER ^misc/ MKOLDCOMPAT
#UNREGISTER ^misc/ RMOLDCOMPAT
# You may comment these out if you don't use the original "new" names
REGISTER .* MKNEWCOMPAT
UNREGISTER .* RMNEWCOMPAT
# Enable module autoloading. You may comment this out if you don't use
# autoloading
LOOKUP .* MODLOAD
# Uncomment the following if you want to set the group to "tty" for the
# pseudo-tty devices. This is necessary so that mesg(1) can later be used to
# enable/disable talk requests and wall(1) messages.
#REGISTER ^pty/s.* PERMISSIONS -1.tty 0600
#REGISTER ^pts/.* PERMISSIONS -1.tty 0600
# Uncomment this if you want permissions to be saved and restored
# Do not do this for pseudo-terminal devices
#REGISTER ^pt[sy] IGNORE
#CREATE ^pt[sy] IGNORE
#CHANGE ^pt[sy] IGNORE
#DELETE ^pt[sy] IGNORE
#REGISTER .* COPY /dev-state/$devname $devpath
#CREATE .* COPY $devpath /dev-state/$devname
#CHANGE .* COPY $devpath /dev-state/$devname
#DELETE .* CFUNCTION GLOBAL unlink /dev-state/$devname
#RESTORE /dev-state
# Uncomment this if you want the old /dev/cdrom symlink
#REGISTER ^cdroms/cdrom0$ CFUNCTION GLOBAL mksymlink $devname cdrom
#UNREGISTER ^cdroms/cdrom0$ CFUNCTION GLOBAL unlink cdrom
REGISTER ^sound/.* PERMISSIONS root.sound 660
REGISTER ^snd/.* PERMISSIONS root.sound 660
# Uncomment this to let PAM manage devfs
#REGISTER .* CFUNCTION /lib/security/pam_console_apply_devfsd.so pam_console_apply_single $devpath
# Uncomment this to manage USB mouse
REGISTER ^input/mouse0$ CFUNCTION GLOBAL mksymlink $devname usbmouse
UNREGISTER ^input/mouse0$ CFUNCTION GLOBAL unlink usbmouse
REGISTER ^input/mice$ CFUNCTION GLOBAL mksymlink $devname usbmouse
UNREGISTER ^input/mice$ CFUNCTION GLOBAL unlink usbmouse
# If you have removable media and want to force media revalidation when looking
# up new or old compatibility names, uncomment the following lines
# SCSI NEWCOMPAT /dev/sd/* names
#LOOKUP ^(sd/c[0-9]+b[0-9]+t[0-9]+u[0-9]+)p[0-9]+$ EXECUTE /bin/dd if=$mntpnt/1 of=/dev/null count=1
# SCSI OLDCOMPAT /dev/sd?? names
#LOOKUP ^(sd[a-z]+)[0-9]+$ EXECUTE /bin/dd if=$mntpnt/1 of=/dev/null count=1
# IDE NEWCOMPAT /dev/ide/hd/* names
#LOOKUP ^(ide/hd/c[0-9]+b[0-9]+t[0-9]+u[0-9]+)p[0-9]+$ EXECUTE /bin/dd if=$mntpnt/1 of=/dev/null count=1
# IDE OLDCOMPAT /dev/hd?? names
#LOOKUP ^(hd[a-z])[0-9]+$ EXECUTE /bin/dd if=$mntpnt/1 of=/dev/null count=1

NTFS is not working in 64bit-mode

NTFS is not working in 64bit-mode but in 32bit-mode all right !!! ***?!

dont work int volume with XP and ext volume just sample NTFS file server ! I do not understand ! (((

My iPhone will not work in landscape mode anymore, how do i get to work again

my iPhone will not work in landscape mode anymore, how do i get to work again??

Double click round home button then slide icon on the bottom of screen to so you go all the way to left. There you will see a square icon with a circle arrow . That is the screen rotation control button. Tap on that to lock/unlock screen rotatio

Default Dashboard not working after user login

Hi All,
We have one issue in 11.1.1.7.1 where PORTALPATH is not working for users. As a result, user lands on home page/recent page instead of the default dashboard after login.
I followed Doc ID 1576576.1 and Bug 17071629 - PORTALPATH SESSION VARIABLE IS INEFFECTIVE is reported. I applied patch 17071629 on top of 7.1. I have tried and verified that
·     The URL we are using to login is “http://machinename:9704/analytics/saw.dll?bieehome&startPage=1”
·         There is no Start Page set in user’s My Account other than Default.
·         In Answers, the PORTALPATH session variable fetches correct dashboard path.
·         I removed space in the dashboard name and tried with following path “/shared/Dashboard/_portal/PortalPathTest”. Also, assigned same default value to the session variable. I also tried “/Shared Folders/Dashboard/Dashboards/PortalPathTest” and “%2fshared%2fDashboard%2f_portal%2fPortalPathTest” but nothing works.
·         lsinventory shows the patch got applied successfully.
One thing to notice -
1.       Login url is: "http://machinename:9704/analytics/saw.dll?bieehome&startPage=1"
2.       After login, browser URL gets changed to "http://http://scoreboard-sit.wellsfargo.com:9704/analytics/saw.dll?bieehomemachinename:9704/analytics/saw.dll?bieehome" and shows Home Page instead of default dashboard.
3.       Now at this stage, if I append "&startPage=1" to the above step 2 URL in browser, it automatically navigates to correct default dashboard.
Also, This patch has fixed default dashboard in Act As. That means, If I act as a User, I land on correct default dashboard. But if same user actually logs in, s/he lands on home page.
I suspect if URL redirection after login is the actual issue. Please suggest if anyone has an idea.
Thanks,
Akshat

I think this was the issue -
There was a java script error related to an undefined object, "accessMode" in logon.js. This is related to Accessibility or Section 508 (checked by Developer Tools of IE). We may have removed this code from the logon page which was causing the error. We had customized the page quite a bit previously. When I ignore the error and step through, I go to the correct portal path page. So we are going to replace the logon.js file with backup and hopefully it will fix the issue.
Cheers!
Akshat

Print Screen not working for user but working for Administrator

Satellite A100 Laptop Print Screen Not working for USER but is working for Administrator[ New ]
09-14-2009 11:25 AM
Hi I am new to this forum and am asking for your help. We are sharing a computer, the PrtSc key is working for the Administrator but not when we switch users. We have tried everything that we can think of: From opening a the page(S) we want to paste to not opening the pages. My most common usage is to PrtSc and paste it into an email , but barring that we have tried opening a page in notes, documents, word etc . Nothing seems to work. I do not get an error message , it just won't paste. Since we are not computer literate we are hoping you can help us with a solution . Thanks in Advance .

Jerry, that post you just answered was from nearly 4 1/2 years ago! And that's the last time the OP was here.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Ctrl+tab is not working in editing mode

I have JcheckBox and JTable in my JPanel. When user clicks or presses F2 to edit any cell value of the JTable a comboBox will appear with possible values. (This comboBox is coming from table CellEditor). When user presses ctrl+tab from the table focus should transfer to JComboBox all time. It is working only when the user presses ctrl+tab from the table cell which is not in editing mode. If the user presses ctrl+tab from the table cell which is in editing mode (i.e. focus is on the ComboBox of the cellEditor) it does not work. Please help me to find the solution.
I give a sample code here for your reference.
public class Frame1 extends JFrame {
public Frame1()
super();
this.setLayout( null );
this.setSize( new Dimension(400, 300) );
JTextField ch = new JTextField();
ch.setVisible(true);
ch.setBounds(10, 10, 10, 10);
this.add(ch, null);
DefaultTableModel tmodel = new DefaultTableModel(3, 1);
tmodel.setValueAt("0 0 1",0,0);
tmodel.setValueAt("1 0 1",1,0);
tmodel.setValueAt("2 0 1",2,0);
JTable custLayersTable = new JTable(tmodel);
custLayersTable.getColumnModel().getColumn(0).
setCellEditor(new ComboEditor());
custLayersTable.setBounds(new Rectangle(40, 40, 280, 145));
custLayersTable.setSurrendersFocusOnKeystroke(true);
this.add(custLayersTable, null);
public static void main(String[] args)
Frame1 a = new Frame1();
a.setVisible(true);
final class ComboEditor extends AbstractCellEditor
implements TableCellEditor
public Component getTableCellEditorComponent(JTable table,
Object value,
boolean isSelected,
int row,
int column)
Vector<String> layerValSet = new Vector<String>();
for(int i=0; i<3; i++)
layerValSet.add(row+" "+column+" "+i);
mComboModel = new DefaultComboBoxModel(layerValSet);
mComboModel.setSelectedItem(value);
mEditorComp = new JComboBox(mComboModel);
return mEditorComp;
public Object getCellEditorValue()
return mEditorComp.getSelectedItem();
private DefaultComboBoxModel mComboModel;
private JComboBox mEditorComp;
}

Thanks a lot for your reply.
Since the textField is in a different class i could not use the transferFocus API directly. I tried the following code in the keyreleased event of Combo Box but it was not working.
KeyboardFocusManager.getCurrentKeyboardFocusManager().focusNextComponent(
e.getComponent().getParent());
I also tried the following code in stopCellEditing and is not working.
KeyboardFocusManager.getCurrentKeyboardFocusManager().focusNextComponent();
Is there any other way to achieve this?

BDC is not working in background mode and working fine in Foreground mode

Hi Experts,
I have created a BDC in SHDB for the transaction code:CWBQM for creating and deleting the record and converted the BDC recording into the program using call transaction. It is working fine in both foreground and background. When I given the same program for users testing one for the user was able to delete the records but Creation is not working in the same BDC. He is able to create the same records in another PC and the problem is only in that PC and only during the creation of the record. When I change the mode to 'A' mode for testing and request the user to execute and it is working fine the records created successfully. What could be the issue ?
Thanks,
Hema

Hello,
While recording BDC in SHDB try setting "Simulate background mode" flag and give a try.
Cheers,
Nag

Buttons not working in fullscreen mode

Hi everyone,
I have a site where our Flash content can be sent to fullscreen by the user. When in fullscreen mode, in some computers the buttons within the content and the mouse stop working completely. It still exits from fullscreen by clicking the escape buttons.
I have a Win XP computer where it works in Firefox and IE but won't work within Chrome. They both have the latest player installed.
I have a Windows Vista where it does not work in any browser.
On a Linux box (version 10,1,53,64) it works on any browser.
On another Win XP computer with version 10.0.45.2 it works with any browsers.
On some Macs it works, on some it doesn't.
The swf file was produced with Flash CS3.
Any ideas?

For that matter, the "return to menu" which is set to a Main button type, isn't working either. that is one of the three. After i had removed the damaged button and copied it from another it worked. Then i simply edited the text of a different button (mind you one that still works) and the "return to menu" quit along with the bottom 2 buttons. I just can't figure it out. I have shut the app down and restarted and nothing seems to be working

Apple External Modem FAX Does Not work in 64bit mode

Apple needs to update its Fax Driver to 64bit mode. Since upgrading to the i7 in 10.6.6, the system boots in 64bit mode which is great! Except i can't fax anymore from my MacBook. Research has shown that it only works in 32bit mode. I do not want to boot in 32 at this point. Anybody know of any other solutions, external fax modems or 64bit drivers or software that will work with the Apple External modem?

I am having similar issue. I can't order a new McBook Pro until I know I can fax directly from it ... its essential for me. I'm shocked no one as addressed your concern. Is Apple so arrogant when it comes to their business customers that they abandon fax/telephony technology with out a fall back position or warning to users?
I got used to Microsoft arrogance; but I was hoping more user concern from Apple.

Safari will not work after sleep mode

After going into sleep mode safari will not work. Firefox works fine, mail is fine. Happened after upgrade to O S x . Browser is Safari 8. How do I fix this?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Yoga 2 Pro - Keyboard lock not working in stand mode

Where can I find the Yoga Utilities suite (Yoga Transitions, Chef, etc.). I just isntalled fresh 8.1 Enterprise and turns out the D:\ partition didn't have the Yoga Utilities available, same on the support site (checked Yoga 13 as well). Pretty dumb, but I can't use the stand since the keyboard doesn't lock

Hi i have this problem did you find a solution other than lenovo transition because i downloaded that and it still doesnt work....
can you please help me if you have any ideas.
my keyboard does not lock or disable in stand mode and sometimes it stops working in laptop mode...
any help would be greaatly appreciated

Wireless works FINE in Safe Mode, WILL NOT work in Normal Mode

Hi All:
I've been smashing my head against the wall with this one. I have uninstalled ALL unnecessary applications I could find. Basically all that is left is Windows XP, Drivers and Patches in Add/Remove Programs. I have removed the wireless driver, downloaded a newer one and installed it, still nothing. I have tried it using no Wireless Security on the AP, and also using WPA, and wouldn't work with either in Normal Mode, but worked with both in Safe Mode. I ran a virus and spyware check (before uninstalling Norton), and it came out clean.
The weirest thing is, sometimes it does connect and get an IP in Normal Mode, but when I run a ping to my local gateway, half the packets are lost (timeout), and the ones that do reply I see a response time ranging from 2ms to 5000ms with no other traffic. I have no idea what can be causing this. Any help would be greatly appreciated.
If all else fails, I will resort to formatting it and installing WinXP from scratch, since I doubt it's hardware.

It appears that some device whose driver does not load in Safe Mode malfunctions.
If this occurs before loading any drivers for added devices, then you'll need service.
Locate a Service Center
-Jerry

HR_INFOTYPE_OPERATION is not working in user exit ZXPADU02

Hi frndz,
i want to delimit/modify record in infotype 0014 after checking some condition when user clicks on SAVE in infotype 0008.
For this i'm using the code like below.
In Include ZXPADU02.
when '0008'.
IF sy-ucomm = 'UPD'.
chek <condition>
if sysubrc = 0.
Lock employee.
Delimti(LIS9) record in IT0014 using HR_READ_INFOTYPE_OPERATION.
Unlock employee.
endif.
Here every thing working fine but record is not getting delimitted.
Could anybody please help me any other possibilities to solve it.
Thanks and Regards,
Venkat

Hi,
I tried to use the FM HR_INFOTYPE_OPERATION in ZXPADU02 but I found that it will
not update data in the real DB table(PAXXXX).I found that in FM 'HR_MAINTAIN_MASTERDATA' from FM 'HR_INFOTYPE_OPERATION' will set the field 'PSPAR-PBPFL' as 'X'.
In standard program, it looks like if this field is set it will not do the logic to update the DB table. So I put the code in other report and then call in the ZXPADU02. I think it's about LUW.
Code as follows to understand.
data:
      lw_p0008      LIKE p0008,
      lw_pskey      LIKE pskey,
      lv_option,
          EXPORT lw_p0008 lw_pskey lv_option
            to memory id 'ZXPADU02_0008'.
          submit ZHRR_PA_ZXPADU02_0008
                 and return.
Inside program ZHRR_PA_ZXPADU02_0008
IMPORT w_p0008 lw_pskey lv_option
    FROM MEMORY ID 'ZXPADU02_0008'.
CALL FUNCTION 'ENQUEUE_EPPRELE'
        EXPORTING
          pernr          = lw_p0008-pernr
        EXCEPTIONS
          foreign_lock   = 1
          system_failure = 2
          OTHERS         = 3.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
    EXPORTING
      infty                  = '0008'
      number                 = lw_p0008-pernr
      subtype                = lw_pskey-subty
      objectid               = lw_pskey-objps
      lockindicator          = lw_pskey-sprps
      validityend            = lw_pskey-endda
      validitybegin          = lw_pskey-begda
      recordnumber           = lw_pskey-seqnr
      record                 = lw_p0008
      operation              = lv_opera
*      TCLAS                  = 'A'
*      DIALOG_MODE            = '1'
*      nocommit               = 'X'
*     VIEW_IDENTIFIER        =
*     SECONDARY_RECORD       =
    IMPORTING
      return                 = lw_return
*      KEY                    =
IF NOT lw_return IS INITIAL AND
     lw_return-type EQ 'E'.
    MESSAGE e000(38) WITH lw_return-message.
ENDIF.
CALL FUNCTION 'DEQUEUE_EPPRELE'
    EXPORTING
      pernr = lw_p0008-pernr.
If this not works, then go for dynamic action from V_T588Z as suggested by Suresh.
Regards
Eswar

Tata Photon is not working on user mode

Similar Messages

Maybe you are looking for