Tax code BW does not appear in any G/L account item

Hi Gurus,
I have a requirement with Brazil client, they have got two types of taxes (PIS and COFINS) For which I created 2 tax codes BW & BX (with 100% & 100%). I created two tax conditoins ZPIS & ZCOF with access sequence MWST. I assigned tax codes to each one of those condition types.
I processed the entire cycle right from quotation to commercial invoice. But while releasing document for accounting in VF02, I am getting the above error. I have checked all configuration settings in SD and also in FI. But I could not found the solutions anywhere. I checked in all postings but thats also fruitless.
Could anyone of you have got this error and if you know the solution, then your response to this post will be high appreciated.
Thanks in advance.
Laks

Not sure why you have maintained 100% for both the tax codes. I am also not sure, where you have maintained this percent. Is it in FTXP ?? As you should be aware, all tax codes would be created in FTXP with respective tax percentage like 4% for one tax code and 12.50% for other tax code.
thanks
G. Lakshmipathi

Similar Messages

Error message "Tax code V1 does not appear in any G/L account item"

Hi,
I am getting the error message FF753- Tax code V1 does not appear in any G/L account item when I post a subsequent credit via miro.
It does not give the error with invoice or credit memo for the sames GL accounts.
History:
PO created
Goods receipt
Invoice posted and blocked as value greater than PO
Subsequent credit put on to correct the values in price query - error appears
I know if I go to FS02 and make the GL code * tax relevant it will remove the error but we dont want tax to go to this account as its a main inventory GL code.
Can anyone advise why it would appear on the subsequent credit but not on invoices or credits.
Also is there something I can set up to remove this issue apart from making the GL code tax relevant - it must not need it if the other postings work ok.
Thanks

Doesnt matter that it works for credits and invoices with blank tax you still need to put * in GL code for subsequent credit etc postings

Tax code ZT does not appear in any G/L account item

Hi Gurus
Iam facing a proble while releasing the billing document to accounting. Following error is coming up
'Tax code ZT does not appear in any G/L account item'.
FTXP setting for the tax code appears find as it is tagged to the correct GL account, but somehow the posting is not happeing.
Can you please help me out with this as Iam stuck and the testing has stopped.
Thanks
Ruchi

Hello,
please check the note 400766:
a) Consistency checks
In FI, the system checks whether there is a revenue line for each tax line. In the reverse case, for each revenue line containing a certain tax indicator there must be a tax line with this indicator.
If the first requirement is not met, the system issues error FF753. In many cases, you can solve the problem with Note 112609
by adjusting the level number in the pricing procedure in such a way that the system copies the tax indicators correctly into the
revenue lines.
If the two tax conditions refer to one revenue condition, the requirement cannot be met if the taxes have different tax indicators. In this case, you must use the tax trigger condition in accordance with note 26646.
Best regards,
Ivano.

Error in F-53. Tax code A0 Does not appear in any G/L account item

Hi All,
I am executing Tx FB60(Enter Vendor Invoice). I have not selected any Tax code, but it's appearing automatically. And when I try to save the invoice I get the above mentioned error. How to have this error removed and create a vendor invoice successfully.
Please help.
Thanks in Advance,
Sagar

Hi,
Please assign non taxable tax codes at company code level in transaction OBCL.
Also please check the expense GL that you are using in FB60, whether tax settings are done or not.
Rgds
Murali. N

Tax code O1 does not appear in any G/L account item

Hi Gurus,
I have a requirement with client, they have got two types of taxes (Adv Income Tax & Value Added Tax). For which I created 2 tax codes O1 & O2 (with 5% & 1.5%). I created two tax conditoins ZVAT & ZAIT with access sequence MWST. I assigned tax codes to each one of those condition types.
I processed the entire cycle right from quotation to commercial invoice. But while releasing document for accounting in VF02, I am getting the above error. I have checked all configuration settings in SD and also in FI. But I could not found the solutions anywhere. I checked in all postings but thats also fruitless.
Could anyone of you have got this error and if you know the solution, then your response to this post will be high appreciated.
Thanks in advance.
regards,
Kumar
Edited by: Mukesh Munigala on Jul 10, 2010 7:29 PM

Refer following link for understanding & solution:
Accounting document not posted from billing document SD module
Hopefully this can assist you.
Thanks & Regards
JP

Tax code P0 does not appear in any G/L line item

Hi,
I am using BAPI_ACC_DOCUMENT_POST to upload the AP/AR Journals. I have a scenario wherein for AP document type 'KA' both the line items are of vendor . One line item though has a special G/L indicator and a tax code to it.
When i execute the program I am geting an error that "Tax code P0 does not appear in any G/L line item".
Here in my case I do not have any G/L line items but both are vendor line items and one line item has a special G/L indicator.
Could anyone help me in solving it.
Thanks in advance.

Hi,
Check the long text of the message FF - 753 in SE93.
It describes the cause of this error and the required customising and solution.
Kindly check with your functional consultant for some inputs.
He might be able to help you identify the error.
Regards,
Ankur Parab

Tax code does not appear in any G/L account item Message FF753

Dear all,
During creating billing document, the system cannot post account document and display the follow error message:
FF753 Tax code does not appear in any G/L account item.
I tried to trace the program and found internal table t_bseg containing 3 entries:
1: Customer a/c: without tax code
2: GR clearing a/c: without tax code
3: Output tax a/c: contain tax code
Customer a/c and GR clearing a/c without tax code causes this error.
Anyone know how to solve it?
Thanks & B.Regards

Hi,
In FS00 for GR/IR A/c in Control data, in Tax Category choose all tax types allowed (*) and also tick posting without tax allowed and try again.
Regards,
Sadashivan

Error FF753 Tax code 01 not appear in any G/L account item with FM Active

Hi
We have fund management configured for one of the company code, while creating billing document through VF01/VF02 we are getting the Error FF753 Tax code 01 not appear in any G/L account item.
This error however does not appear when posting directly from FI with the same tax code.
I have tried to change the message control in which case i am getting a dump pointing to PSM-FM.
Please advise.
Regards
Sandeep

Hi:
          If you could please refer to the contents of OSS Note 112609 - How are tax codes transferred to conditions ?
"Symptom
If a billing document is transferred to accounting the system displays error messages. Transferring tax codes from tax conditions into the pricing conditions and discounts does not function as expected.
Other terms
FF805, FF747, FF753, MWSKZ, MWSK1, tax code
Reason and Prerequisites
The tax condition in the SD pricing procedure contains incorrect reference steps, there are several tax conditions in the pricing procedure of which the tax codes overwrite each other or a program error exists.
Solution
In the accounting document for a billing document, the different G/L account line items are provided with a tax code. The tax code of the G/L accounts is transferred from the tax condition(s) of the billing document. How are the tax codes of the tax conditions transferred into the other conditions of a billing document ?
Basically:
The conditions of a billing document are read from top to bottom. As soon as an active tax (inactive = ' ') is read, the system transfers the tax code of this tax into the non-tax conditions as follows:
    1. The reference steps (From-step, To-step) are read (the reference steps are defined in the pricing procedure).
    2. The tax code is transferred into all conditions, for which
    the step number of the condition lies in the pricing procedure between "From-step" and "To-step",
    the condition is not inactive (exactly: the inactive flag is not equal to A (Condition exclusion), M (Inactive due to manual entry), or X (Incorrect)),
    the condition is not statistical (if it is no invoice list condition),
    the condition is no tax condition.
After the transfer of the tax code the system searches for the next active tax. If further taxes are found, their tax code is again transferred according to the above procedure. If the reference steps of different taxes overlap, tax codes that have already been transferred are overwritten. To all non-tax conditions which in the pricing procedure stand after the last tax condition the tax code of the last active tax condition is transferred if they are not statistical.
Special features:
    1. If the "From-step" of a tax condition refers to a subtotal of the pricing procedure, the tax code of the tax is not only transferred into the conditions with step number between From-step and To-step but into all non-tax conditions for which
    the step number of the condition in the pricing procedure is lower than the "To-step" of the tax condition.
    the condition is not statistical (if it is no invoice list condition).
    the condition is not a tax condition.
    2. If the "To-step" of the tax condition is smaller than the "From-step", then the system sets "To-step = From-step".
Notes:
    1. As of Release 4.0 the tax code is no longer transferred in pricing but only when the billing document is released to accounting.
    2. If you use several taxes and tax codes and Customizing is incorrect for the release of billing documents to accounting, among others the system may display error message FF747.
    3. If there are several taxes in the pricing procedure refer to Notes 72173 and 82091 for Releases 3.0D - 3.1G. For Release 3.1H, only note 82091 is relevant.
    4. For conditions which are transferred into accounting (thus not statistical, not inactive conditions) and do not contain a tax code, the system searches for a default tax code which in Accounting Customizing can be set depending on the company code (tax code for non-taxable transactions). This applies to releases up to and including Release 4.5B. For Release 4.6, refer to Note 385127."
Regards

Tax code V1 does not exist in the system (T007A)

Hi all,
Need some expert help here. I'm testing this travel management solution provided by SAP. I have configured all so that the functionalities are apparent in the ESS Business package. Unfortunately, when i tried to create a 'travel request' via SAP Portal, i'm getting the error message "Tax code V1 does not exist in the system (T007A)". The error message appears once on review page.
Since this is a Sandpit environment, i believe taht there might be numerous missing config. Can anyone point me to the right direction? Thanks
Regards

Hi All,
Thanks for the quic reply. That solved the problem for travel request. I maintained tax type V1 and N1 and all is good. However, i got another new error now when i try to create my travel expense. After filling up all the necessary info (tested for accomodation booking), i got the following error:
"Entry not found in table T706V. Argument: 14P EUR L 0191520080909"
I went to that table but couldn't make sense out of it. Any pointers please? Thanks
Regards

Tax code V0 does not exist for jurisdiction code IN00 Message no. FF718

Hi,
i have configured as per suggestion in message as well as assign Jurisidiction code in taxcode in FTXP, but when i try to create PO with tax code V0 and jurisdiction code IN00 then we are facing error "Tax code V0 does not exist for jurisdiction code IN00 Message no. FF718"
please advice me and help to resolve this issue is any config missing pls guide me.
Thanks
Best regards
Shital D

Please check this answered link:
Juristiction code - Error: FF718
Cost centre
Edited by: Afshad Irani on Jun 22, 2010 7:05 PM

Tax code EA does not exist for jurisdiction code QC000000

Hi All,
We are getting this error "Tax code EA does not exist for jurisdiction code QC000000".
Can anyone suggest on this ?

Hi All,
I am still working on this issue and want to add some information based on my analysis and if at all some could suggest something on that it would be very helpful.
I tried to debug the IDOC which was giving this error and also simultaneously debugged the other IDOC which was successful.
I found that the failed IDOC is giving this error as when SD_COND_ACCESS Fm is called in the satndard code , the failed IDOC scenario doesn't return any values in condition records table for one of the condition types ZIR1.
Where as the successful IDOC returns values for condition records table when FM SD_COND_ACCESS is called for condition type ZIR1.
Any suggestion ??
Thanks !
MK

Tax code & country & does not exist in procedure & FF713 only in PRD

Hi Experts,
I have created a tax code w1 for CST and included in request also
When I trans ported in development in quality it has been worked properly
But now in the Production system it is showing the error as FF713
Tax code & country & does not exist in procedure &
Detailed message is
NA FF713
Short Text
Tax code & country & does not exist in procedure &
Diagnosis
You entered a tax code which is not defined for the country of the company code to be posted to in the tax calculation procedure.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
Check whether the company code is assigned to the correct country and whether the correct tax calculation procedure has been entered for the company code country.
Create a new tax code if necessary.
Caution:
Since it is possible that the tables in question are being updated at a different time on another computer, it can take a certain amount of time for the tax code to be on all local machines in client server architectures after saving the new code.

iam getting error as Balancing field "Business Area" in
line item 001 not filled .
If you define document splitting criteria based on Profit Center and if your billing document contains multiple line items with different profit center, this type of error will come.
To check this, Go to IMG Path -- Financial Accounting (New) --> General Ledger Accounting (New) --> Document Splitting --> Define Document Splitting Characteristics for General Ledger
There check whether the mandatory check box is selected for profit Center. So check in your billing document, whether any line item does not have profit center.
Last but not least, till your query is addressed, dont mark the thread as "Answered", as many members will skip your thread and you will miss getting their suggestions.
thanks
G. Lakshmipathi

Error-- Condition type MWST tax code A0 does not exist

I have an Invoice and it didnu2019t pass for accounting entry.
The error is promptu201D Condition type MWST tax code A0 does not existu201D, It never came at the time of Sales order creation.
Diagonosis says the following
When calculating tax, the system tried to determine the condition amount and the condition number from tables A003 and A053 using the specified condition type and tax code. However, no values were found there.
Procedure says the following thing
Check the Customizing settings for the specified tax code. Check whether the validity period (possible with tax jurisdictions) is defined.
Please guide.

Christiano,
First let analyze the situation.
1. Execute Tcode VA02 --> Item Details --> Conditions tab --> Click Analysis button. Try to find for condition Type MWST whether values are flowing.
If it is not there then you have not maintained condition record.
2. Tax Code.
Execute FTXP Tcode , Check For A0 Tax code check whether you have maintained any value. if yes then check in condition record, whether you created record with Tax Code - A0
If everything above is perfect and correct
3. Check Copy Controls and Pricing type
Check the Validation period (it should not be the problem)
Check and Revert
Regards
Sathya
Edited by: Sathya Pavan Yedavalli venkata on Apr 21, 2009 2:06 PM

Error message FF762 " Condition type MWVS tax code A8 does not extist- MIRO

Dear all,
after support packagesi mplemented , I've the problem with transaction MIRO,
because I cannot released the invoic for the folloqiong error:
FF762 " Condition type MWVS tax code A8 does not extist.
Please, could you help me.
Thanks in advance for your cooperation
Gaetano

Hi,
Go to FTXP and give the tax code A8.
In the resultant screen, select the condition type MWVS, and link the condition type to an account key.
Make sure all the other tax determination settings are fine
Now, try the transaction it should work fine.
Hope this helps you

Condition type MWST tax code A1 does not exist

Hi all,
I'm facing the problem while I'm releasing Billing doc to Accounting. This is the error
Condition type MWST tax code A1 does not exist
Message no. FF762
Diagnosis
When calculating tax, the system tried to determine the condition amount and the condition number from tables A003 and A053 using the specified condition type and tax code. However, no values were found there.
System Response
The specified amount cannot be posted in FI.
Procedure
Check the Customizing settings for the specified tax code. Check whether the validity period (possible with tax jurisdictions) is defined.
I have already checked FTXP, and the Tax Code is already there.
I have already checked the condition record, and it is already there,
Maybe I have missed something...?
Thanks before for all your help
Regards,
Rizki Harris

Hi Typewriter,
1. Check in a previously created invoice, accounting document - the tax code? (FB03) is it A1?
   --> the tax code is A1
2. In VK12, MWST do you have other values of % tax (e.g. 0%). In a sales order, give appropriate Tax classification values for CMR, MMR so that MWST value = 0. Create invoice and check if you are getting the message
   --> in VK12 for Key Combination Domestic Taxes :
        TaxCl1Cust   TaxCl.Mat     Name                                 Amount     Valid from    Valid To         Tax Code
        0                    1                  Tax Exempt Full Tax                          25.07.2011   31.12.9999    A0
        1                    0                  Liable For Taxe No Tax                        01.01.2008   31.12.9999    A1
        1                    1                  Liable forTaxeFull Tax              10       25.07.2008 31.12.9999    A1
     --> I still don't understand what do you mean by CMR, MMR ?
3. Condition type MWST is not allowed to be processed manually..
Regards,
Rizki Harris

Tax code BW does not appear in any G/L account item

Similar Messages

Maybe you are looking for