Tax code error while releasing a billing document to accounting in VF02

Hi SAP Gurus,
While trying to release a billing document to accounting, the following error is displayed
" Tax Statement Item Missing for Tax Code TA".
Message number: FF805.
Please provide your valuable inputs to overcome this issue.
Suitable points shall be rewarded.
Thanks and Regards,
Sreeni.

Check your pricing procedure. One of the Tax relevant items is ending up with a base value of Zero.
This is easy to check if you double-click on tax related Pricing Conditions, you will find one of them with a base value is zero.
If not, it could be something more simpler, like GL Account master data. Make sure the "Post without tax allowed" box is checked and ensure the tax category is masked ("*").
Hope this helps.
Cheers.

Similar Messages

Error while releasing the billing document to accounting

Dear All,
I need your favor to resolve the below issue:
(System SAP SAP ECC 6.0)
User is getting the below error message while releasing the billing document to accounting in VF02:
This is an inter-company billing document (B. type : IV) created in company code 0151. Payer is "IC0186", verified the customer has been setup in 151.
Corresponding invoice has been successfully posted in company code 0186. (Partner : P0151)
User is able to post the inter-company document in 0151 using other inter- company partner (ex. IC0183). Therefore, seems that Document type can't be an issue here.
"Consolidated companies 151 and 186 are different
Message no. F5080
Diagnosis
The number of the affiliated company must be clear for the selected document type for all the line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
Procedure
If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account."
Could anyone please suggest what can be the reason, if any configuration is missing. Any help is this regard will be highly appreciated
Thanks in advance,
Praveen

Hi Murali,
Thanks for the prompt input, however as mentioned document type can't be an issue. Since user is able to post the document (same document type) using other inter-company partner in 0151.
Thanks,
Praveen

Error while releasing a billing document to accounting.

Hi Guys,
I have a billing document and i am trying to release it to accounting but we are not able to do it. We are getting an error
System error in routine FI_TAX_GET_TXJCD_LEVELS error code 2 function builder TAX2
Message no. FF769
We are on SAP ECC 6.0.
any idea how to resolve this issue? I have looked into many OSS notes but was not able to find anything close.
Cheers
VJ

Hi Vijayendra,
Were you able to solve this issue? We have the same thing happening and was wondering if you could help me here.
Thanks.
regards,
Raj

Error While Releasing the Billing Document Msg No. KE/AD 243

I am getting error while releasing the billing document
Error No KE/AD 243
This error comes in particular billing document only others are posted correctly.
Rgds
Dhiraj

Dear Anil
We had applied EHP3 enhancement, before EHP3 is working fine with no transfer sign assignment but after EHP 3 it gives the error and not in all billing document but in particular document only. so i think there is no changes required in KE4I.
Rgds
Dhiraj

Error while releasing the Billing document

Hi Everyone,
Encountering an error with the description 'Balance in Transaction currency' while trying to release the Billing document from VF02 transaction, still didnt come across the right oss note that can remove this error, can any one give me a clue on this,
Rgds,

hi,
We are facing similar problem, when releasing the billing document to accounting.
Have you been able to find the solution to this problem. If so, kindly suggest the answer
Thanks
Dinesh

Vf02 error while releasing a billing doc to accounting

Hello All,
I m getting the below mentioned error while releasing a billing doc for a accouting.
I have checked all the settings in vkoa , ob52 and many more and all are set properly, now m not able to track where actually the prob is.
error is: No account is specified in item 0000001004
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000001004" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000001004" of the FI/CO document.
Points wil be rewarded
Thanks,
SUnny

Hi,
Have you checked what is the determination account determination log ? You can do this by entering in VF02 and select from the menu Environment -> Account Determination Analisys -> Revenue Accounts.
In this log you can see what are posting keys determined from the pricing procedure that should be posted in the FI document and determine very easy in which step the account was not determined.
After that you can maintain the correct account in VKOA transaction.
BR,
Valentin

Error During Releasing of Billing Document to Accounts Department

Hi,
Kindly help me, we have just finished the upgradation from 4.6 version to 6 version. when we are releasing the billing document to accounts department error message is coming like this.
No entry has been made in the assignment table for condition type P001.
I verified this one through KE41 transaction, as already maintained the combination of condition type and value field both options (tick and untick of transfer +/-).
Billing type is ZIV.we are getting this error message only for this billing type.
kindly suggest me any SPA notes required to be implemented in order to release the same.
Regards,
Vasu S

hi,
once your order is created and also delivery, there is no problem in the data of the material.
the only possibility is that you must have skipped the post goods issue step or if PGI is mandatory for delivery creation then there must not be appropriate stock for that item.
you can check the stock of that particular material in the specific plant by t.code MMBE.
regards,
Siddharth.

Error While Releasing the Billing Doc to Accounting.

Hi All,
When I am Releasing the Billing Document to Accounting the Value of JIN2 Condition Type is not getting released to Accounting. It is giving the Following Error.FI/CO Interface : Balance in Transaction Currency. I have all maintained the Account Determination. But Still I am facing the same problem.
Please suggest any Solution.
Thanks,
Prashant.

Hi Prashant,
Please check the following function in transaction SE37
(here you could check if the functions enhancement is in any project and
also if the function is active): EXIT_SAPLV60B_001 - 011.
Using transaction CMOD you could take a look at user exits that are
active in your system. Please de-active projects in particular relating
to the billing process than check whether the error resists.
Also check to make sure that there is not an unused user exit active.
Regarding to use exits created data inconsistencies please find the
attached note:
160211 Usage of USER_EXIT creates data inconsistency
Please also find the note
48431 Unused user exit runs
how to check if a user exit is active.
The list of user exits with specifications please find in the following
note: 301077 User exits for the interface to accounting
If these notes are not helpful please check another possible cause of
error F5702. Sometimes this error is triggered when the net value is
changed in pricing (userexit, own routine or formula). Please check also this
possible reason.
Cheers,
Alex

Tax code error while releasing into accounting

hi
i raised sales order with price,basic excise duty,cess,hcess forgot to give cst and saved order.then i done delivery(picking,packing,pgi) and raised commerical invoice and released into accounting.then i cancelled billing reentered cst in order and done billing.while relesing into accounting it is throwing errroe taxcode in tax inn is invalid.incustomer master i mainted tax classification correctly as 1& 1 but the sytem is reading as 2 &1 in pricing analyis with cs
can any one suggest
thanks and regards
venkatramana.m

Hi Venkat,
For the issue "errroe taxcode in tax inn is invalid" Kindly check the OUTPUT Tax Code assigned to Company code in transaction OBCL and check the Tax Code assigned in "Maintain Excise Defaults" for TAXINN Proceedure.
Below is the path for "Maintain Excise Defaults"
SPRO>Logistics - General>Tax on Goods Movements>India>Basic Settings>Determination of Excise Duty>Maintain Excise Defaults
Ensure that both the place OBCL and "Maintain Excise Defaults" Tax code should be same.
Hope this will help you to resolve the issue.
Regards
Murali

While releasing the billing document to accounting

Dear Guru,
We are into rollout project . New condition types are defined by the SD Consultant and account key is defined but while i m releasing to accounting i mgetting the following error
[No account was specified for account type "S" in item "0000001003" of the FI/CO document.
i v checked the account determination analysis i m getting the Gl account depend upon the conditions
Thanks & Advance
Laxmi

Hi,
Try not to repeat your questions.
Check the properties of the GL account and field account type.
Ask your FI consultant he will do the rest.
Tcode FS00.
Reward points if useful
Regards,
Amrish Purohit

Restriction for release of billing document to accounting

Hi All,
Need you inputs for meeting the below requirement.
There is a requirement to control the release of billing document of a certain billing type to accounting based on certain users.
The posting block has already been ticked at the definition of the billing type so that the release to accounting does not happen automatically. The release to accounting then will be done manually by users through tcode VF02. Here the requirement is that only certain users need to have the authorization to release the billing document to accounting through VF02 i.e not all users who have access to VF02 will be able to do this activity of releasing to accounting. These users can however release billing documents of other types to accounting.
Is there any user exit wherein we can place an authorisation object for checking the user role?
Note: When relase of billing documents is done via VF02 the tcode VFX3 get called in background.
Regards,
Rajkumar

Hi,
Try these ywo approaches- restrict the authorisation to VFX3 using basis roles. And try to fiddle with this field in vbrk using userexits- RFBSK. Try this exit
USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC)
Regards,
Saurabh

While releasing the billing document error

Dear TEAM,
While releasing the billing document system was showing the message like NO STANDARD COST ESTIMATE COULDBE FOUND FORTHE MATERIAL.
I have suggested to the user to release the price through ck24.At that time system is showing the message like cost has not been created for the inhouse production.
The samething was tested in Qualiy server and the transaction was through.I have not done any price release for the samematerial.I have checked the table under VBAP the documents was made against to the samematerial.That time we have not faced any issues like this.
Note:Material ledger concept using by client.
Please kindly advice how to proceed further.
Regards,
Suma

have you checked in ck13n if there is a standard cost estimate for the material and what status it has, if there is one? Also, what are the dates in that cost estimate? How do they compare to the date of the billing document? What does the customizing say about the selection of cost estimates for valuation of SD documents? SPRO>Controlling>profitability analysis>master data->valuation-->Set up valuation using material cost estimates
Nikolas

Error releasing a billing document to accounting - Billing Plan error

Hello,
I recently encountered a problem with releasing a billing document to accounting. When I click the release to accounting button in VF02 I would get this message "Billing plan 0000057337 does not exist - Program error".
Here are my findings thus far, that particular number appears to have been drived from the number RPLNR, which really isnt encoded in other billing docs. Also the problem seems to arise from the calling of the function module BILLING_SCHEDULE_READ where the rplnr from VBRP(i think).
A similar problem occurs a few months ago and the person who handeled this just advised to cancel the billing doc and re-create a new one.
However, I was wondering if any of you knows the reason why this problem could have occured so it will not happen again.
Hope to hear from all of you soon. Take care and good day.

Hi Ched ,
You can store a billing plan at item level in the sales document during order processing.All the relevant settings are available under the path given below :
Under SPRO / S&D/Billing / Billing Plan .
I had a cursory look , the billing plan is what dictates the invoicing but its not compulsory. It is attached to the Order type & the sales order takes the Billing plan if there is any in the order type. Looks like there was some changes were effected in these settings between the period of the creation of the Sales order & release of the billing document. Have a look....
Do assign points if you feel this info was useful....
Cheers
Kartik

Is it possible to have more than one Tax code per line item in Billing docu

Is it possible to have more than one Tax code per line item in Billing document ?

Hi,
I have a different perspective there.
If an item is applicable for two different taxes which are represented by two different tax condition types and these tax conditions are configured in the tax procedure, FTXP and so on....then these two condition records can have two different tax codes.
We actually have this scenario in EU now, where EU talks about service tax in 2010 apart from the normal VAT. So now we have MWST and ZWST(Say)
Now there are some materials which come with a service associated with it. So a service charge is also levied when the material is sold. So the material price will become applicable for VAT and the service charge becomes applicable for service tax. In this case, the tax classification of the customer will have two entries in sales orders updated in the fields VBAK-TAXK1 and VBAK-TAXK2 based on the sequence number of these condition types.
Now based on different tax classification of the customer, we have 2 different tax codes representing different %of tax.
Hope it helps

ERROR IN RELEASING A BILLING DOCUMENT

Hi all,
when i am releasing a billing document to finance in T.code- VF02, I am getting the following error message though i have done all the tax related settings in tax proceedure and assigned the same to country :
Error:-
Tax code in procedure ZTAXIN is invalid
Message no. FICORE704
Diagnosis
The tax code entered is not defined in the country for this company code.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
1. Check whether the required tax determination procedure is assigned to the relevant country. the Procedure field is in the detail screen.
2. Create a new tax code if required.
I have so many threads but I am not getting the right solution any where.
Can any one help me.
Thanks-
SAMRAT
Moderator: Please, search before posting and avoid writing titles with CAPITAL letters

Error: Tax code v8 in procedure TAXINJ is invalid (message no. FICORE704)
Tax code in procedure TAXINN is invalid
Tax code in Procedure taxinn is invalid

Tax code error while releasing a billing document to accounting in VF02

Similar Messages

Maybe you are looking for