Tax code for Own accomodation
Plz let me know the tax code for Own accomodation
I got to know the below codes
SHRA - house rent allowance
SCLA - company lease accomodation
SCOA - company owned accomodation
what is for Own accomodation?!!
HI,
SCOA - company owned accomodation this is for the COA.
I hope your look for the other own accomodation like own house ..
You can find the sam e in the IT -HRA.
Or for the loan purpose check the IT-585.
All the Best
KRC
Similar Messages
-
How to find open SO Items with tax code for a particular day?
Dear all
If i want to see all open SOs(items), with tax code for a particular day, how to find using table VBAP in SE16?
Please guide me
Edited by: Julius Bussche on Mar 3, 2009 11:10 PM
Please use descriptive subject titles and the searchHi GB,
Its always better to see through the standard reports , as you will be able to see the aditional info as well.
In the case of table in se16 you will be able to see one table at a time and then you need to manually figure out the fields that required.
For example if you want to see the sales order details through tables then
1.You have to go to VBAK to see the document type and then you need to go to VBAP to see the items , it means that you need to access 2 tables for this simple thing ....
In standard reports there will be lot of joins between the tables and you can view the data more elobarately as weel.
Note : In general if you want to see the complete details of the documents(open), then pls use the reports.
Regards,
Vvieks -
How to configure Two Tax Codes for single line item in work order
Hi All,
Please do Review the below scenario and tell me how to solve it.
A) Certified Work Done Gross Bill Amt 100,000
Total Work Done Value 100,000
Less : Labour & Like Charges @ 30 % on Rs 100,000 = 30,000
Vat applicable Amount = 70,000
Add VAT @12.5% Chargeable on Taxable Turnover of Rs. 70,000.00 = 8750
Total Bill Value = 108750
Service Tax @ 12.36% on 33% Value of Rs. 100000 = 4079
G.Bill Amt = 112829
Total Amt Due for Payment = 112829HI, There is a possible solution for this scenario.
1. Create 2 tax codes for VAT and SERVICE Tax at 12.5% and 12.36% respectively
2. While posting the Invoice (TRX - FB60) following steps need to be followed.
3. Amount has to be split into two line items
4. Ist Line Item should have the Vat amount + 70000/- and select relevant tax code that was
created for 12.5%
5. Similarly 2nd Line Item should have Service Tax amount + 30000/- and select relevant tax code that
was created for 12.36%.
Hope this would meet your requirement. If the solution is okay, kindly indicate the points.
Regards
K.Sanjai Babu -
P.O. with different Tax codes for each line item.
Hi
I would like to know how the IV has been done for the P.O. with differnt tax codes for each line item. Since in MIRO at header level we can select only one tax code.Hi
Raju,
It means we can post only one invoice at time i.e.for line item same taxcode is there.
e.g. If line item 10 has tax code A1, 20 has A2 then on header i can only select either A1 or A2 tax code & post invoice of that line item. -
Syntax error while creating tax codes for sales n purchases
Hi all,
While creating the tax codes for sales and purchases, i got the below error:
Report RB13A003 has a syntax error.
What should be done?
Thank youHi,
I believe, it's RV13A003 report and not RB13A003... What is the exact error message (or is it a dump)?
Regards,
Eli -
Tax Code Determination - default tax code for sales
Under the tax code determination window i have set the default tax code for sales as VAT@4% and I have save it. but when I open the sales quotation , order or any other sales document the tax code is not appeared. what could be the reason?
thanks
SV ReddyIs ur "Determination Type" is 'Material Type'?
FYI from Help file,
When you enter item information in the marketing documents, system will check the item master data. If the item classification for the tax is:
Material Item
The tax code determination for material will start.
Service Item
The tax code determination for service will start.
When you enter service information in the marketing documents, the tax code determination for service documents will start
Regards,
Dhana -
Hello,
I have configured discount-in-kind free goods using the standard NR00 condition type. With the necessary configuration and condition records in place I am attempting to test my setup by creating a purchase order.
The discount-in-kind calculation is working correctly, creating item 11 containing the free goods quantity (set up as exclusive).
However, I am receiving the error: In case of ERS, please enter Tax Code. Due to our business process the user is not able to enter this manually, it must be automatically populated.
We have a tax condition type on in our main calculation schema which is correctly determining the tax code for the item 10. However, this is not getting copied down when item 11 is created, and since it is a free good, there is no condition tab which is used to determine the tax code.
Am I missing something or is there additional set up to populate the tax code for the free good? Our taxes are somewhat complex as we operate cross boarder (one material may be not taxable in one country, and taxed at different rates in another one).
Thanks in advance,
MattHi,
ERS indicator is based on Vendor Master if you are creating PO for that vendor for all items it will ask for Tax code
Since tax code is mandatory to for ERS to run in backgeorund
Now if you are using one line item as free goods you need to create some dummay tax code with ZERO tax
Hope its clear
Thanks
Diwakar -
Creation of Service Tax code for Service Tax Payable
Hi
Please advise me to create service tax code for service tax payable
Thanks and Best Regards
Shekhar
Edited by: Shekhar Yecham on Sep 16, 2008 8:28 PMHi Randeep,
As they said it is service tax GTA.Right we are doing out of SAP, we want it to be done in SAP
The tax calculation will be like below
service tax of 10.3% has to caluclate on the 25% of the Base amount. Like
25% is taxable and 75% is livied.
Base Amount - 100.00
25% of the base amount(100/25) = 25.00
service tax(10.30%) to be calculate on Rs. 25.00
25*10.30% = 2.57
Base amount --> 100.00
Service Tax --> 2.57
Total: 102.57
Regards,
Siva. -
Change the Tax Code- In Sales Order i have Tax code for VAT
In Sales Order i have Tax code for VAT ( Condition type JIVP) it is reflecting "P4" instead of "A4".
Where the "P4" Tax code is picking in Sales Order.
How to change the Tax Code.
UrgentHi CHAKRI,
Check if the condition record is maintained with the appropriate taxclasssification.If yes, Go to sales order in change mode,then goto-header-billing-alternate taxcalssification and modify tax classification.It will pick up right tax code.
Regards
Ram Pedarla -
Determine of Tax Code for Country/Product Category - Table handling
Dear Experts,
in SRM 7.0, CS, i am facing the following requirement regarding tax codes:
We have users from different countries using SRM. These different countries have different tax codes that are to be used for legal reasons.
My question is, how i can achieve a system behaviour, by which in the shopping cart, the correct tax codes gets selected automatically, based on the country of the user, who is creating the shopping cart.
Question 1:
Is it correct to assume, that this requirement can be achieved by maintaining the "Determine of Tax Code for Country/Product Category" - Table?
Q2:
What is the purpose of the 1st column of the above mentioned table, "Domestic/International Indicator"? Can it be left blank?
Q3:
Is it possible to fill in the values for the field "Country" BUT to leave the field "Category ID" empty???The reason for asking it, that otherwise several hundreds entries would have to be maintaind manaully...
Q4:
From where in the shopping cart or ppoma settings is the system fetching the Country code, in order to be able to use it in the table? Is there any specific attribute maintenance that has to be taken care of, so the above mentioned table can be used (e.g. delivery address, including the country information)?
Thank you very much for your help in understanding the topic.Hi
Here are my responses to your questions:
Question 1:
Is it correct to assume, that this requirement can be achieved by maintaining the "Determine of Tax Code for Country/Product Category" - Table?
Answer - If you have a requirement where different countries have different tax codes, then you do need this confiugration. Otherwise Configuraiton in Enter Tax Code are sufficient.
Q2:
What is the purpose of the 1st column of the above mentioned table, "Domestic/International Indicator"? Can it be left blank?
Answer - Sometimes you have different codes for International and Domestic purchases for a product Category. IN those situations you can select Domestic/International field to differentiate btw tax codes. Otherwise this field can be left blank
Q3:
Is it possible to fill in the values for the field "Country" BUT to leave the field "Category ID" empty???The reason for asking it, that otherwise several hundreds entries would have to be maintaind manaully...
Answer - No, if you enter country, then Category Id field is mandatory. You may enter * in case you dont have multiple backend systems. otherwise you will ve to ve individual entries for each category and backend system.
Q4:
From where in the shopping cart or ppoma settings is the system fetching the Country code, in order to be able to use it in the table? Is there any specific attribute maintenance that has to be taken care of, so the above mentioned table can be used (e.g. delivery address, including the country information)?
Answer - It is picked up from the address of the user where is will receive goods. and Domestic/International will be decided based on Vendor address with reference to thta address.
I hope my responses clarify your doubts.
Regards
Virender Singh -
BAPI for updating tax code for purchase order..
Hi friends,
I have one requirement to change tax code for multiple Purchase order but the
thing is they should not go for release.So what should I prefer BDC or BAPI.
I am thinking to implement it through BAPI, but I don't know what procedure to follow.
If somebody can provide me a small guiding steps or code then it will be very helpful for me..
Thnaks in advance..
Useful answers will be rewarded with points....
Regards,
Rajesh AkarteHi Friend,
BAPI_ACC_PURCHASE_ORDER_CHECK Accounting: Check Purchase Order
BAPI_ACC_PURCHASE_ORDER_POST Accounting: Post Purchase Order
MEWP BAPIs Purchase order
BAPI_PO_CREATE Create Purchase Order
BAPI_PO_GETDETAIL Display Purchase Order Details
BAPI_PO_GETITEMS List Purchase Order Items
BAPI_PO_GETITEMSREL List Purchase Orders for Release (Approval): New as of 4.0A
BAPI_PO_GETRELINFO Display Detailed Release (Approval) Information on Purchase Order
BAPI_PO_GET_LIST List Purchase Orders - Only up to 4.0A
BAPI_PROCOPERATION_GETCATALOGS Determine Valid Catalogs as Value Help
BAPI_PROCOPERATION_GETINFO Analysis of Objects to be Generated in Purchasing
<b>AND</b>
Use condition type NAVS with access sequence 0003 to default the taxcode in the purchase order item using conditions. Materials Management -> Purchasing -> Purchasing order processing ->define screen layout at document level. Search for the transaction ME21.Double click on ME21. Then search for TaxCode
Use condition type NAVS with access sequence 0003 to default the taxcode in the purchase order item using conditions.
A2: Go to IMG.
Materials Management -> Purchasing -> Purchasing order processing ->define screen layout at document level.
Search for the transaction ME21.Double click on ME21. Then search for TaxCode. It is advisable to configure also the info record. The tax code should be a required entry, and whatever you specify here will be the default value in the Purchase order.
Materials Management -> Purchasing -> Purchasing info record -> define screen layout.
When you get here you search for the transaction ME12 ,double click here; search for Input VAT indicator.
Regards ,
Kumar. -
Posting multiple tax codes for single line order in MIRO
Hi all ,
I have received a request from my business colleagues to investigate the possibility of posting multiple tax codes against a single line order in MIRO.
This apparently can be a possibility for such things as training.
I have searched a number of forums and tried and tested different ways in my develoment client but am unable to find a solution. admittedly I am no real expert in this area and would be gratefu;lt of any ideas / assistance / etc..HI, There is a possible solution for this scenario.
1. Create 2 tax codes for VAT and SERVICE Tax at 12.5% and 12.36% respectively
2. While posting the Invoice (TRX - FB60) following steps need to be followed.
3. Amount has to be split into two line items
4. Ist Line Item should have the Vat amount + 70000/- and select relevant tax code that was
created for 12.5%
5. Similarly 2nd Line Item should have Service Tax amount + 30000/- and select relevant tax code that
was created for 12.36%.
Hope this would meet your requirement. If the solution is okay, kindly indicate the points.
Regards
K.Sanjai Babu -
Different tax code for condition type
Hello Gurus,
I have defined a calculation schema for import POs.
I would like to automatically determine the default tax code on the invoice verification depending on the condition type, for examle:
Cond type Tax code
ZF01 Freight --> C0 0%
ZS01 Custom agent --> C1 13%
Any ideas?
Regards,
Nelson.If you wish to default the tax code for the planned delivery costs this must be obtained from an independent source which is OMR2 If you do not wish to default the tax code, then the only alternative is to select the tax code when in transaction MIRO.
At least withing the standard I don't know any solution for that =/
Sorry & good luck!
Plauto -
Hi All,
I created a new tax code for calculating tax liability on freight charges payable to transportation company.
However this tax code is not appearing in the pop-up list in Freight window.
Can anyone help me in understanding how this can be configured.
Thanks,
SrikanthHi Srikanth,
Given below are the steps to define Freight in all marketing documents.
First you tick the fright in document setting u2013 manage fright in documents
Set upu2014general u2013 fright set up (here you can define fright name, revenue and expenses account and so on)
Then setup u2013 General u2013 Finance u2013 Tax u2013 tax code set up
When youu2019re trying to posting marketing document tax code automatically come to the marketing documents.
Your problem might be
In tax code set up
Unpick the lock for use
Pick the expenses
Effective from - in which date on wards
Regards,
Senthil Maruthappan .
Team work never fails.
Edited by: Senthil Maruthappan on May 20, 2008 8:05 AM -
Tax codes for Company code wise
hi kings
I am facing big problem is I want to listout the company codewise tax codes for whatever i am using in last year. So how can i get the list for tax code for my code with in period.
regards
sritry this:
REPORT ztaxrep01.
TABLES bset.
SELECT-OPTIONS: bk FOR bset-bukrs.
PARAMETERS yr TYPE gjahr.
DATA: BEGIN OF ztab OCCURS 0,
bukrs TYPE bset-bukrs,
land1 TYPE t001-land1,
kalsm TYPE t005-kalsm,
mwskz TYPE bset-mwskz,
END OF ztab.
DATA itab LIKE ztab.
SELECT bukrs land1 FROM t001 INTO CORRESPONDING FIELDS OF itab
WHERE bukrs IN bk.
SELECT SINGLE kalsm FROM t005 INTO itab-kalsm
WHERE land1 = itab-land1.
SELECT mwskz FROM t007a INTO itab-mwskz
WHERE kalsm = itab-kalsm.
SELECT SINGLE mandt FROM bset INTO sy-mandt
WHERE bukrs = itab-bukrs
AND gjahr = yr
AND mwskz = itab-mwskz.
IF sy-subrc = 0.
APPEND itab TO ztab.
ENDIF.
ENDSELECT.
CLEAR itab.
ENDSELECT.
LOOP AT ztab.
WRITE: / ztab-bukrs, ztab-land1, ztab-kalsm, ztab-mwskz.
AT END OF bukrs.
ULINE. SKIP.
ENDAT.
ENDLOOP.
A.
Maybe you are looking for
-
Error during invoking the web service
hi, i am using axis 1.2.1 & tomcat-5.0.28 when i am trying to invoke the web service i am getting the error. i am passing all the parameters..then also it is giving the error.i have used the wsdl file to generate the stubs (using wsdl2java tool).the
-
Reversed type looks "bold" on new iMac
I just bought a new iMac (specs below) and immediately noticed that reversed type (white type on dark background) in Safari and Firefox definitely looks "bold" for a lack of a better word. This is in comparison to the 3 CRT monitors around our home/o
-
Hi Gurus, Here I am running the report " cash book Print" t code:S_ALR_87012309 , even I maintained the text in SO10, still it is not showin the opening and cloising balances Kindly help me, your valuable suggestions with regards Arun Kumar
-
Updated all my CC software and it left all the older versions on the computer. Is it OK to uninstall the older versions?
-
has anyone had this problem - I have installed the latest NMT (1.4) and cannot see my phone in the iPhoto. I am using OS x 10.5.5 and iPhoto '08 latest update, the phone is E50. Music Transfer works but I cannot see my device (i.e. E50) there as well