Tax code in A/R Invoice drops when the Ware House Code is changed

Hello All,
I am Using SAP Business One 2005A PL12 with Canadian Settings.
When I add an Item in the A/R Invoice, it comes with a default TAXCODE, but when i change the ware house code the Taxcode drops,
Can any one tell me why is this so?
Thanks in advance
Manish

Manish,
I am not sure if you mean you are using Business One 2005A SP00 PL12 or 2005A SP01 PL12. In both cases, PL 12 is very old. You should download the latest patches for your specific version, apply and retry your code.
Eddy

Similar Messages

Will the price of the iPhone5s drop when the iPhone6 comes out?

Will the price of the iPhone5s drop when the iPhone6 comes out?
I currently don't have a phone right now and I was wondering if I should by the 5s now or wait till to 6 comes out and buy it then (If the price is going to drop). Or should I just buy the iPhone 6????

Look at the prices at your carrier and the Apple stores and other authorized dealers.
If they go down, then, yes, prices drop.
If they do not, then no.

I updated to ios5 and when i now buy apps, it tells me my security code is invalid, though i type in the right security code

how do i fix this

Sign in to the store using iTunes on your computer and check the payment details. Enter the correct security code for your credit card. If it still won't work, contact the card issuer and ask them what's wrong.

How can I make a control inside a loop in a subVI change value when the calling VI's control changes?

Hi.
I think this is a pretty basic LV question, but I have not been able to find a good solution.
I am attaching VIs that show the problem I am having, but obviously, the real application is a lot complicated, which forces me to try to do it this way.
The issue is: I have a subVI with a Boolean control inside a loop. When the control is true I want some action to take place. When the subVI is run on its own, it works fine, acting properly when I set the boolean control to true via the LV FPGA interface from the host. However, when I use it as a subVI, in which the top-level VI calls several instances of the subVI, I have the Boolean controls in the top level VI. What is happening is that the false Boolean value with which the top-level VI starts is passed into the subVIs, and not updated, even though the control is inside the loop.
Can any one suggest a good solution?
Thanks,
AlejandroZ
Attachments:
CallingVI.vi ‏7 KB
subVI.vi ‏8 KB

Hi.
I know the example I posted might seem silly, but it was just to illustrate the problem I am having. In reality this is the application:
I have some LV FPGA code which uses a few FPGA IO to implement a serial link to communicate with a device. Most of the time we are getting data from the device, so the serial link is used to send a read command, read in the data and put it into a FIFO. However, I also wanted the VI to support sending data to the device, so I added an array control to put the data you want to send, and a boolean control to tell it you want to send it.
Since sending and receiving data are done using the same FPGA IO, they cannot be independent operations, because they would garble each other. Therefore, in the subVI I have a loop in which I first read data if there is any to read, then check the boolean write control to see if there is data to write.
As I mentioned, this works perfectly for talking to a single device. However, we run into the issue of this topic when trying to replicate this for several devices.
One easy solution is to not have the loop in the subVI, and have it in the calling VI (I am favoring this simple solution right now). The only reason why I have not done this yet, is that the subVI has more than one loop, so I am going to have to create several subVIs. I just posted to see if there was an even simpler solution...
There have been some other possibly good solutions proposed here, though I am not sure if they work in LV FPGA.
Thanks for all your responses.
AlejandroZ

Purchase orders are duplicated when the SAP sales order is changed

HI Guys
We got an issue here, when a sales order is changed at the same time PO is duplicated and sent to the vendors.
Someone just enter a change of address on this sales order and our system sent PO which is already being Invoiced, again to the vendor for a ship direct order. But this time the only information the vendor got was the address change.
Any idea where is it going wrong. (Version 4.7)
Will assign points to every useful answer.
Thanks

tranz V/30 or
spro
sd
basic fun
output control
maintain output type (before find your output type in your sales order)
cond.type - details
TAB General data
check the flag for Multiple issuing
check TAB Default values as well

Infopath: Rules run before Code...So Can we close the form through Code?

Hi,
I have a form with a couple of buttons. Clicking on any of the buttons first executes the RULES and then jumps to execute the code in the FormCode.cs file for the button click event. However, if I have "Close the Form" as one of the Rules for the button, the code does not execute. So, is there a way that I can close my Infopath fom after executing the code instead of closing from the RULES? Also "The form has been closed" is the message which pops up after closing form through rules. Can we redirect to the form library instead of showing this message?
I tried to execute everything through code in FormEvents_Submit. It works fine if I have a single submit button. But how would i differenciate if there are multiple buttons like Approve, Reject etc.
Thanks !

Hi Aanu,
Thanks for the reply.The proposed solution in the thread is to use;
this.Application.ActiveWindow.Close();
or
thisXDocument.View.Window.Close(true) in order to close the form.
Both of them don't work when I try to use them in Visual Studio. It complains of a missing namespace.
Did this approach work for anyone?

Subportal doesn't change when the user's group is changed, until next login

Hi,
We have two subportals: Physician and Resident. We also have two groups: Physicians and Residents. Users belonging to Physicians see the Physician subportal when they login, and Residents see the Resident suportal. When a Resident becomes a Physician, we move the user from the Resident group to the Physician group (programmatically) when they log in for the first time after this event. Unfortunately, the resident still gets logged in to the Resident subportal. However the next time they log in, they are sent to the Physician subportal. So we are logging out the user when this happens. Can anyone suggest how the user can be redirected to the correct subportal after a group change? Could this be some kind of caching issue? Maybe there is a way to log the user in a second time behind the scenes?
We are using Plumtree version 5.5
Appreciate your help.
Regards,
R.A.
Edited by: user2334044 on Jul 30, 2009 11:24 AM

In reply to my own post, what we ended up doing eventually was a behind the scenes log out and log back in. Unfortunately we had to store the password in session, which is not a good practice.
Here is what we did:
     private AActivitySpace m_asOwner;
     public void Init(IModel model, AActivitySpace space)     {
          m_asOwner     = space;
     public Redirect CheckActionSecurityAndExecute(XPHashtable arguments)     {
          IXPRequest iXPRequest = m_asOwner.GetCurrentHTTPRequest();
          XPSession xPSession = iXPRequest.GetSession();
          String usersPassword = (String)xPSession.GetAttribute("usersPassword"); // this was added to the session in OMDGuestLoginActions
          Redirect redirect = new Redirect();
          redirect.SetLinkCreateNewSpace(LoginAS.STR_MVC_CLASS_NAME, null);
          redirect.AddControlArgument("in_hi_space", "Login");
          redirect.AddControlArgument("in_hi_spaceID", 0);
          redirect.SetControl(LoginControl.STR_MVC_CLASS_NAME);
          redirect.AddControlArgument(LoginHTML.PARAM_DOLOGIN, true);
          redirect.AddControlArgument(LoginHTML.PARAM_USERNAME, nameOnly);
          redirect.AddControlArgument(LoginHTML.PARAM_USERPASS, usersPassword);
          redirect.AddControlArgument(LoginHTML.PARAM_AUTHSOURCE, "OMD Portal");
          return redirect;
Password is set here:
     public Redirect OnAfterLogin(Object oUserSession, ApplicationData appData) {
                    String in_pw_userpass = appData.GetParameterValue("inpw_userpass"); // read from the login form
                    IXPRequest iXPRequest = _appData.GetRequest();
                    XPSession xPSession = iXPRequest.GetSession();
                    xPSession.SetAttribute("usersPassword", in_pw_userpass); // this is for passing it to LoginAgreementRepostControl
                    Redirect guestRedirect = new Redirect();
                    guestRedirect.SetLinkCreateNewSpace(LoginAgreementAS.STR_MVC_CLASS_NAME, null);
                    guestRedirect.SetControl(GuestLoginAgreementControl.STR_MVC_CLASS_NAME);
                    return guestRedirect;
}

Any news when the text bubble text will change.

Hey friends, I know this was a highly question when ios7 was released. But by now did not know if any further info is avail. I've been a iphone user since 2008 loved the ios6 functions. Over the years my eyesight is not as good as it used to be. Since ios7 came out with the with the white text in the blue or green bubble its been extremly hard to read even larged with bold. I've read reviews dating back to sept on this issue. As of right now Ive had to switch phones and os to the other guys where I can download 3rd party text apps to read my messages. Does anyome know if any changes are coming up so I can switch back to the iphone. Wanting to upgrade to the 5s. Thanks for any info.

Anything related to any changes in the OS would be announced at the official Apple events. Everything else is just speculation, and speculation is not allowed on this forum.

MIGO : When the movement type field is changed in transaction is changed.

Hi
If the movement type field value is changed in the MIGO, i was getting a popup. this popup had a check box ( skip in future)
I selected this and was doing my testing. Now how to restore it back. please help.

Hi,
Go to MIGO
Here in Menu Settings > Default values
Here click on "Redisplay tips already read"
And click on "Adopt" button and then check in MIGO, it will start displaying the message pop-up

Calling a java script function when the value of an item changes

Hi,
I have got 2 items which are of "Text field(disabled,saves state)" type. The items are "P2_Industry" and "P2_Industry_segment". Have a link next to each item label, so that a pop up opens. Industry pop up shows all the industries and based on the selected industry, the industry segment pop up shows only the corresponding industry segment. Now, there is a problem. Once an industry and an industry segment is selected, if we change the industry, the industry segment does not change, which is not right. I want the industry segment field value to become null once the industry field is changed. Thought of writing an onChange html cell attribute, but don't know why, it is not working in the case of "Text field(disabled,saves state)" item. It works fine for just "Text field" item.
Could anyone please help me with a solution as the item must be of "Text field(disabled, saves state)" type.
Thanks,
Vignesh

Hi,
This is the function I use to return value for P2_INDUSTRY and a similar one for P2_IND_SEGMENT as well.
<script>
function test(){
var radioLength = document.wwv_flow.p_ind_array.length;
var retVal = '';
if(radioLength == undefined)
          if(document.wwv_flow.p_ind_array.checked)
               retVal = document.wwv_flow.p_ind_array.value;
          else
               return "";
     for(var i = 0; i < radioLength; i++) {
          if(document.wwv_flow.p_ind_array.checked) {
          retVal = retVal + ';' +document.wwv_flow.p_ind_array[i].value;
retVal = retVal.substring(1, retVal.length);
opener.document.getElementById('P2_INDUSTRY').value = retVal;
window.close();
</script>
I guess the change needs to be done in page 2 only because, on change of INDUSTRY, the function needs to be triggered to clear INDUSTRY_SEGMENT value.
Thanks,
Vignesh
Edited by: Vignesh N on Nov 3, 2009 12:37 AM

How to refresh mx:List when the data in dataProvider is changed

I have a mx:List that uses an ArrayCollection as a dataProvider. The ArrayCollection contains many Object, something like:
var o:Object = new Object();
o.label = "Apple";
o.price = "$1.00";
var o:Object = new Object();
o.label = "Kiwi";
o.price = "$0.20";
Now the dataProvider (ArrayCollection) is updated outside the mx:List, not through the itemEditor. I want the mx:List to show the changes in the
dataProvider (ArrayCollection), but currently it does not automatically show the changes. I could not find a refresh method in the List or dataProvider
to force the List to reload the data. Any suggestions?

Hi John, have you tried arrayCollection.refresh()...where arrayCollection is dataProvider for your List.
Thanks,
Bhasker

Float drop when I switch column order

I would like my main content column to load before columns 3
and 4, which have external content that is sometimes slow to load
(Flickr, Twitter, Furl).
http://www.patiastephens.com/new/
But when I move the main content column above columns 3 and 4
in the source code, columns 3 and 4 drop below the main column.
It's very frustrating! Any ideas?
Thanks.

Still really need help with this.
Is there anything I can do to make my question more
understandable, like pasting code here?

Creating of incoming invoice automatically when documen info record created

Hi all,
I apologize because I am asking many questions on this forum during the last few weeks, but I have some problems which I can't solve by myself in one project.
So, this time the question is about incoming invoices.
Here is the situation:
When our customer receives incoming invoice (in paper form) we scan it and send it to one Document management system. In that system we verify the invoice and approve it. After that step the document is released to SAP (only the document info record is created and that info record points to the original document (pdf file) in that DMS).
Now the question is:
Is it possible to automatically create incoming invoice (parked) when the document is released to SAP (it+s document info record created) and to create link between these two SAP objects? Basically it means that at the moment when doc. info record is created, the incoming invoice is created (only with mandatory data) and saved (parked).
We need this functionality because our client wants to have the access to original document (pdf file) when he is about to finish the incoming invoice.
So, is it possible to set up some parameters so that incoming invoice is created automatically after the document info record is created, and linked to that document info record?

I was not aware that u have already done coding to create DIR in SAP. In that case u don't need to rely on status triggering, u may create the invoice prior to DIR creation and then link it to the DIR.It can be done in the way u have mentioned. I.e. linking at the time of DIR with BAPI_DOCUMENT_CREATE.
I doubt we have any direct link to Incoming Invoice from DIR. One of the options i can think of is linking DIR to EKPO(Purchase Order Item) which is mentioned in Invoice.
Else u may need to add another object with object table "RBKP"
Following link will help u in creating new Object for development of new screens [http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm]
BAPI_DOCUMENT_CREATE2 is the latest BAPI instead of BAPI_DOCUMENT_CREATE.
Points Appreciated.

Double invoice entry at the FI Level

Where do I go in the FI level not to allow double invcoice entry.
Thanks
AG

> Csaba Soltesz,
> Could you explain both:
> How do I set up the FI_DUPLICATE_INVOICE_CHECK
> validation and also how to do it for MIRO
> transactions.
> I would appreciate feedback.
> Thanks
> AG
Hi Ana,
sorry for the late reply.
For the FI check, there is no specific setup. Only thing you need is to set the corresponding flag in the vendor master (company code view). Then, if the prerequsites are met (see below), a warning message will appear.
How the check is working in FI? (ie., FB01, FB60 or similar, NOT logistics invoice verification, for LIV, see below):
1. Is this a vendor line (account type K)?
2. Is the flag set in the vendor master?
3. Is the line item sales relevant (based on the posting key, e.g., 31 is sales relevant, 25 is not)
4. Is this a normal document? (not recurring, parked, clearing, sample doc)
5. Do we know the document currency?
6. Do we know the document date?
7. Is the amount in document currency <> 0?
If the answer to all of the above was YES, then the check is carried out. What is actually checked, is table BSIP. Every time when you post a document meeting the above criteria, BSIP will be updated. Next time the BSIP entries are checked.
And here the checking rules:
IF the reference field (BKPF-XBLNR) is filled in, then the message is issued when there is a BSIP record already with the same:
- company code
- vendor number
- document date
- reference
- document date
- D/C indicator
IF the reference field is NOT filled in, in addition to the above, the amount in document currency is also checked in BSIP, so that field must match too in order to get the message.
The message is F5 117 and the type can be changed in customizing (view V_T100C) as usual for customizable messages.
The above list also answers another question in this thread: NO, it is not possible to check it cross company code. I.e. if you have entered an invoice for company code A, then you can enter the very same invoice for company code B, there will be no message at all. You need to create some validations (transaction OB28) to achieve this. The standard check is working within the same company code only, see the list above.
Now, that was the pure FI thing, how about Logistics Invoice verification (MIRO, etc.). Here, you have some more configuration options. The function module called here is MRM_FI_DOCUMENT_CHECK.
The check in Logistics Invoice Verification is carried out only if the below criteria are met:
1. Reference field is filled in (!!!!! extremely important!!!!)
2. This is an invoice (and not a credit memo... see RBKP-XRECH must be X)
3. The vendor number is known
4. The flag is set in the vendor master (company code view).
The check is made against BSIP again, but WHAT exactly is checked, i.e., which fields must match, is customizable. In table T169P, you can tell the system which fields you want to consider as indicators for a double invoice entry. You can choose from: Reference, Company code, Document date.
Here is part 2 of the answer to the previous question: YES, Logistics Invoice Verification can be set up in a way that invioces are checked cross-company code. If you do NOT mark the field company code, than this field is not checked, and the same invoice cannot be entered for 2 different company codes.
First, the system tries to find a BSIP record with the same values in the fields below:
- Vendor number
- Document currency
- Amount in document currency (this only if Reference is NOT ticked in table T169P)
- Company code (only if ticked in T169P)
- Document date (only if ticked in T169P)
- Reference (only if ticked in T169P)
If there was a BSIP entry found, message M8 108 will appear as a warning. Again, you can change the msg type to error if you like (user-specific).
Also, Logistics Invocie Verification can be a 2-step procedure: first, the invoice creation (entry in table RBKP) and second, the posting of this invoice to Accounting (entry in table BKPF). In most cases, this happens in the very same moment when you press Save in MIRO, but it could be also set up in your company that you do these 2 steps separately.
That's why after the posted invoices (BSIP) were checked, the system tries to check the invoices not yet posted to Accounting (invoice document status is "Not yet posted"). This is to make sure an entered but not yet posted invoice is also checked early enough. Basically the same fields as above are checked, but the message is a different one: M8 642. Default type is warning, changeable to Error if you like.
Hope that helps, points welcome
Csaba

SetRegion does not update the region when the current one is slightly diff.

I'm working on some iPhone MapKit code which fires off some events when the boundaries of the map change (basically some queries to an external server). There is one edge case I can't seem to solve. When users enter a new address I use setRegion to zoom in on that location and afterwards I compute the bounds of the map and query my external server with those coordinates. I always call setRegion however, there is one edge case when it will not fire. That, is, when a user magically happens to select the exact same address that lies at the current center of the map, when that map is zoomed to exactly the same region. Of course this possibility is rare but it is easy achievable in code.
This would be the equivalent of allowing the user to drop a pin at the center of the current map and fire off a query to my server based on that. Unfortunately because the code logic depends on the region changing (which I've done so that users can easily pan around the map and not have to explicitly press a refresh button), I need a work around. How can I know when setRegion has been called but it won't fire regionWillChange / regionDidChange. Can I override the function some how?
As a work around I tried to detect when the region wouldn't change by writing code just before I set the region to compare the new region's center coordinates and span values to that of the current map region's.
Unfortunately when I set the search Location to be the center of the current map I get the following results:
diff in latitude of center 0.000000
diff in longitude of center 0.000016
diff in latitude span -0.000000
diff in longitude span 0.000000
In different cases the error is slightly different but generally speaking even when the region is slightly different like this setRegion or morever, regionDidChange, do not fire. Can anyone explain why? Or how I could go about detecting this properly. Note: I also tried with mapView.centerCoordinate but I get similar errors, and I only want to know when the region will NOT change (if the centerCoordinate is the same the zoom level / region can still be different).

I realized the code was not included. That should make my question clearer
CLLocation *centerOfMap = [[CLLocation alloc] initWithLatitude:mapView.centerCoordinate.latitude longitude:mapView.centerCoordinate.longitude];
mySearchLocation.searchLocation = centerOfMap;
//Recenter and zoom map in on search location
MKCoordinateRegion region = {{0.0f, 0.0f}, {0.0f, 0.0f}};
region.center = mySearchLocation.searchLocation.coordinate;region.span.longitudeDelta = 0.01f;
region.span.latitudeDelta = 0.01f;
[self.mapView setRegion:region animated:YES];
And:
//Recenter and zoom map in on search location
MKCoordinateRegion region = {{0.0f, 0.0f}, {0.0f, 0.0f}};
region.center = mySearchLocation.searchLocation.coordinate;
region.span.longitudeDelta = 0.01f;
region.span.latitudeDelta = 0.01f;
region = [mapView regionThatFits:region]; //Not sure if this is necessary
NSLog(@"diff in latitude of center %f", (mapView.region.center.latitude - region.center.latitude));
NSLog(@"diff in longitude of center %f", (mapView.region.center.longitude - region.center.longitude));
NSLog(@"diff in latitude span %f", (mapView.region.span.latitudeDelta - region.span.latitudeDelta));
NSLog(@"diff in longitude span %f", (mapView.region.span.longitudeDelta - region.span.longitudeDelta));
[self.mapView setRegion:region animated:YES];

Tax code in A/R Invoice drops when the Ware House Code is changed

Similar Messages

Maybe you are looking for