Tax code maintainence without Tax Jurisdiction Code in Tcode FTXP

Hi all,
In TCode FTXP, I want to create Tax code without Jurisdiction code. But in the screen, I have that particular field as mandatory. How can I do it.
Regards,
Gnanasambanthan

hi
check this setting have you maintained any structure
Financial Accounting (New) -->Financial Accounting Basic Settings (New) -->Tax on Sales/Purchases -->Basic Settings -->Specify Structure for Tax Jurisdiction Code

Similar Messages

How to Bypass Tax Jurisdiction Code while Posting FI Document

Hello All,
   I have a requirement where I can enter Tax code along with Tax Jurisdiction for some of the cases while Posting FI Document using T code s FB01.. etc.
However for one scenario I need to BY pass the Tax Jurisdiction while posting FI Document . How to achieve this.
As per SAP once we define Tax Jurisdiction it is mandatory to enter as Input to Post the document.
But I need to control this Tax Jurisdiction as I dont want to enter while posting FI Document.It should not prompt for Tax Jurisdiction .
How to make an option field in this case (Based on Company code and Tax code combination).
Any BADI / User exit/BTE to Ignore the Error message Enter Tax Jurisdiction code).
Please help me as soon as possible.
Thanks.

My Query is , when am posting a document in FB01 Transaction , when I enter Tax code at line item level, Tax jurisdiction is mandatory if we dont enter it give an error saying that ' Please enter a Tax Jurisdiction' .
   My requirement is I would like to bypass that error without entering Tax jurisdiction I would like to proceed by providing default Tax Jurisdiction through any userexit/BADI/BTE. so that I will not get that error .
   So any USER-EXIT/BTE/BADI is there which will trigger before the error(maintain tax jurisdiction ) at line Item leve ?????
I hope now requirement is clear.

Purchase Order Tax Jurisdiction Code Default

Hello,
I have a business requirement to have my tax code default based off of Delivery Address Region field.
I can achive this by creating a custom condition table with region, creating a custom access sequence, inserting the custom table, and attaching it to condition type NAVS.
My problem is that my tax code requires a tax jurisdiciton code. So I can default the tax code but that is useless without being able to default the tax jurisdiction code.
How can I default the tax jurisdiction code in the delivery address, _*WITHOUT DEFAULTING IT IN THE PLANT OR STORAGE LOCATION MASTER DATA. IT NEEDS TO DEFAULT BASED OF OF REGION.*
Is there a condition type for Tax Jurisdiction code or something along those lines.....

Hello,
There is a BADI available with name ME_TAX_FROM_ADDRESS [SE18] (Tax jurisdiction code taken from address). As per documentation, this is the correct one for you.
The Business Add-In (BAdI) ME_TAX_FROM_ADDRESS provides you with additional functionality to determine the tax jurisdiction code in purchase orders. At item level, the tax jurisdiction code maintained in the delivery address can be used for tax calculation purposes.
Thanks,
Venu

When we post Inbound Invoice IDocs, we are getting an error message "Enter a tax jurisdiction code".

Hi Experts,
When we post Inbound Invoice IDocs, we are getting an error message "Enter a tax jurisdiction code". As checked, we have configured OBCD and OBCA for the vendor and we are passing the Tax Jurisdiction code in E1EDP04 SAL segment. Can anybody give us some idea to resolve this issue.
Regards,
Sameek

Hi Sameek,
Please refer the below link. Hope it helps.
http://scn.sap.com/thread/1435286
Regards,
Chandan.

While doing MIRO i am getting an error: Enter a tax jurisdiction code

Hi,
While doing a MIRO, i am getting an error :
Enter a tax jurisdiction code
Message no. M8757
How to Resolve
Pratik

Hi
Try this
1.To enter the tax amounts of the G/L account items, choose Extras ® Tax amounts. The Tax Amounts screen appears.
You can branch to this screen at any point during document entry.
The Tax Amounts screen shows the tax amount, tax code, posting key, tax base amount, and jurisdiction code for all the items already entered. When you call up this screen after entering the G/L account items, it displays the amounts that have already been entered.
2.You can now choose how you want to enter the taxes.
The tax jurisdiction codes represent the different taxing authorities to which you submit payment for taxes EG: the state, county, city etc.
In SAP you can have as many as 4 levels. Configuration is done in 2 steps :
First step :
The tax jurisdiction structure (structure of the tax code) is set up with following menu path :
IMG >Financial accounting> Fi Accounting basic settings> tax on sales/purchases > basic settings > specify structure for tax jurisdiction code.
Alternatively you can use t-code OBCO
This step allows you the enter the character length of your various level of hierarchy within your tax jurisdiction code structure (State 2 char, county 3, city 4, etc...).
Second step:
You configure the tax jurisdiction code using the structure defined earlier, menu path :
IMG >Financial accounting> Fi Accounting basic settings> tax on sales/purchases > basic settings > define tax jurisdiction codes.
Alternatively t-code OBCP
Define your tax jurisdiction codes, EG GA0000000 for Georgia, GA001000 for Georgia, douglas county, GA001001 for georgia, douglas county, city of lithia springs.

Tax jurisdiction code creates a difference when posting invoice with PO ref

I have added a tax jurisdiction code since the client wants to be able to sort taxes by location. The problem now is that, I have posted a PO with a tax jurisdiction code but upon posting the invoice with reference to this PO, there's an error saying that there still exists a balance even though the balance on the screen is zero. Any ideas on how this can be solved?

Hi ,
Can you please tell us how you resolved? We do facing the same problem.
Thanks
Ganesh

SYST: Tax Jurisdiction code at lowest level not transferred

Dear Experts,
I am getting the above error while Releasing the Billing document to Accounting. I have created a ZTAX - Manual Tax (for enterring VAT% manually). Created the Sales Order, Delivery and Billing. At the time of document releasing to accounting i am getting above error.
Please help.
Thanks in advance

Check this thread
Error: SYST: Tax jurisdiction code at lowest level not transferred
G. Lakshmipathi

Tax Jurisdiction Code Check as part of a Sales Order Partner Function

Hi,
I have a scenario where we modify partner information directly in the sales order. These partners are simple addresses and are not tax relevant. We have set them up as one-time customers. Every time when we modify the address information, Vertex kicks in and tries to match the address information (street, city and state) with a tax jurisdiction code. In our case the address information is high level (only city and state) which is not enough for Vertex. SAP issues then a blocking error message.
We try to find a way to ignore Vertex for these specific partners. In the documentation we have found a user exit, as well as a BADI, but our developpers were not able to make it work in the sales oder.
The user-exit is the following: EXIT_SAPLFYTX_USER_001
The BADI is the following: IF_EX_ADDRESS_SUBSCREEN
In EXIT_SAPLFYTX_USER_001, I've found a parameter (EXEMP_IND) which could enable to bypass the tax jurisdiction code check and the RFC call to Vertex.
In IF_EX_ADDRESS_SUBSCREEN, I've found a parameter (CHECK_ADDRESS) which could potentially bypass the check as well.
Did any of you already experience this scenario or would you have an idea about how I could make this work?
Thanks
Loic

Unfortunately, the sales order is created through an interface (using iDOCs), and the external system feeding the iDOC for the sales order creation does not have any Zip Code information. Besides, even if the Zip Code is entered, it is still not enough for Vertex to choose automatically a Tax Jurisdiction Code, most of the times, it is also requiring a District, which again, will not be passed from the interface.
We went through this analysis already and we came to the conclusion that we need to bypass this check, as this partner function is not tax relevant.
Thanks,
Loic
Edited by: Loic Dominik on Jun 27, 2011 7:39 PM

Tax Jurisdiction code is not replicating from Delivery address tab to Invoi

Hi Gurus,
when i trying to change the value i.e tax jurisdiction code in the delivery address tab that value is not replicating to the Invoice tab in the transaction ME22N.
How to resolve this ???
thanks in advance.

Hi,
Make use of this BADI ME_TAX_FROM_ADDRESS in this use method GETTXJCD_
You will get the delivery address number using function modeul MM_DELIVERY_ADDRESS_TXJCD_GET
Regards,
Pravin

Tax jurisdiction code is not entered

Hi,
I am trying to clear vendor open items in F-44 it is showing error "Tax jurisdiction code was not entered" , while posting invoice or post the payment there is no field like Tax Jurisdiction code in the document. I checked in BSEG table there the tax juris code field is blank but it is not appeared in the document and checked the field status of posting key and others also the field is not there and checked in vendor master even entered the tax jurisdiction code also showing the same error.
Please help.
Thanks in advance.

I think your document contains Taxes and tax jurisdiction is enabled in your system. Tax jurisdiction key is normally maintained in your tax code if you have enabled Tax Jurisdiction applicability. Check your config. in OBCO and OBCP. Also check if you have given any jurisdiction code in the tax code used.
You can also check if Jurisdiction code is a mandatory field in the address of the vendor or customer you are trying to post. Fill the field if not already filled.
Ravi.

PO Tax Jurisdiction Code defaulted from Plant but then overwritten by CC

Hello everyone!
I had a question regarding defaulting the tax jurisdiction code. When using ME21N the tax jurisdiction code is defaulting from the value we have in the plant which is what we want. When I go and fill in the additional information that the PO needs to be saved (such as GL, Cost Center, etc.) it is overwriting the defaulted plant tax jurisdiction code and changing it to the Company Codes default jurisdiciton code. Is there a way to NOT have the company code value enter? I just want it to remain as the plant Tax jurisdcition code.
Thank you,
Rob

please read the OSS Note 501054 - FAQ: Taxes in purchasing
How is the tax jurisdiction code (tax jurisdiction code) determined in purchase orders?
Answer:
You activate the tax handling with tax jurisdiction codes in FI Customizing (transaction OBCO). In the standard system during the creation of a purchase order, the system consideres the following sources for the tax jurisdiction code: Reference item, request for quotation, contract, plant, the account assignment object. During this process, the system overwrites the respective preceding value in this list. If, for example, you have maintained a tax jurisdiction code with the account assignment object for a purchase order item, this entry "wins" as opposed to the entry in the plant table. Besides this, the tax jurisdiction code can be entered manually.
If you use the function from Note 493515, also the tax jurisdiction code from the delivery address can be taken into account (see below.).
There is more useful info in this note, as well for jurisdiction code

You are not allowed to enter a tax jurisdiction code for country US

Hi All,
We are having this message popping up "You are not allowed to enter a tax jurisdiction code for country US" when we try to add an item to a shopping cart. SRM 4.0 Classic scenario.
Also when i process the shopping cart and create a PO out of it, our R/3 4.6C dosnot let me release the PO and error message is :"no tax jurisdiction code found"
I have looked at some of the earlier threads but i could not find a definite solution. Has anybody faced similar problems? Please let me know !
Thanks
Sundeep

Hi Sudeep,
How did it work? Do you have to implement any BADI's or SRM or R/3 side? As we are getting same error while creating Shopping Cart in SRM.
I have checked the plant data in R/3 and Jurisdiction code has been maintained there.
Please advise
Thank you
Ritesh

Tax Jurisdiction Code not defined for procedure TAXSE

Hello,
We are facing any issue with the error "Tax Jurisdiction Code not defined for procedure TAXSE"
We are in mid of production bill run and this is getting very critical. Any pointers would be highly appreciated.
The company code country is SE (Sweden)
We have 2 BPs with address in California, US.
The Billing is successful for both the BPs.
While invoicing, one BP is successful.
The other is going in error "Tax Jurisdiction Code not defined for procedure TAXSE".
Error Details
Jurisdiction code not defined for procedure TAXSE
Message no. FF748
Diagnosis
You have entered a jurisdiction code in a country whose calculation procedure
does not allow the entry of jurisdiction codes.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system
settings.
To do this, choose Maintain entries (F5).
Change your calculation procedure so that tax calculation is carried out
using the jurisdiction code.
The BP and the CA setup is exact for both the cases.
Thanks

Hi
Go to the following SPRO config-
SAP Customizing Implementation Guide-->Financial Accounting-->Contract Accounts Receivable and Payable--->Basic Functions--->Contract Accounts--->Field Modifications--->Configure Field Attributes per Activity
Select Change and double-click on field grouping Jurisdiction code.
You will get the following screen.
You have to tick the option Changes plannable and then you will be able to remove jurisdiction code from CAA2
Hope it helps..
Thanks,
Amlan

Tax Jurisdiction code for EDI Incoming invoice

Hi,
We have implemented EDI incoming invoice using INVOIC02. The process code is INVL.The invoice is to be posted against a Purchase Order line item. It is noticed that the EDI invoice is not getting the Tax Jurisdiction code from the Purchase Order line . Instead the Tax Juridiction code is copied from the company code. However when we post the invoice manually using MIRO , then the Tax Juridiction code is copied from the Purchase Order. We understand that the system should take the Tax Jurisdiction code from the Purchase Order even for EDI invoices. Is it compulsory that we have to use the user exit EXIT_SAPLMRMH_014 in order to populate the Tax Jurisdiction code field TXJCD from the Purchase Order line? or is there any config required to enable the transfer of Tax Juridication code from the Purchase Order? In transaction OBCE there is a config to transfer the tax jurisdiction code supplied by the external vendor. If we do not check that box , then system is supposed to get the tax jurisdiction code from the Purchase Order.
Thanks
Sukumar

The issue is resolved through OSS Note 506343. In the standard R/3 system, the tax jurisdiction code can't be written to invoice via EDI and only the Ship To Plant's Tax Jurisdiction Code is written to the invoice.
Regards
Sukumar

How can I define Tax Jurisdiction code in CRM?

Hi,
I want to repliate some business partners into CRM. But when processing IDocs of BP, there's an error for some of them like "Jurisdiction code 490333321 is not defined".
So how can I find and define tax Jurisdiction code in CRM? Another question, Do you know where is the Jurisdiction code in IDoc? Because I can't find it in IDoc structure.
Thanks a lot!

Hi,
Please have a look at the following link for your information:
http://help.sap.com/saphelp_crm50/helpdata/en/13/a0edd1947649ef8f06d881510a25e0/frameset.htm
Reward if it helps
Johnny.

Tax code maintainence without Tax Jurisdiction Code in Tcode FTXP

Similar Messages

Maybe you are looking for