Tax code releated to excise

i want to create tax code in purchase order related to excise , please tell me tell me which condition should be taken, i have maintain J1id,
Basic excise -10
education cess-2
secondary & higher education cess-1
please guide me .
regard
nabil

HI,
Excise Duty-10.3% Maintain in SAP as follows.
Condition type - JMOP     -   10 %
                           JMX1    - 100% MAINTAIN
                            JECP   -     2%
                            JSEP   -     1%
Using T-code FTXP - Maintain tax code created and then the created tax code condition value to be created using T-code-FV11 Create Condition.
Hope, it is useful for you.
Regards,
K.Rajendran.

Similar Messages

Tax Code Creation when Excise is not Known during PO creation

Hi,
Scenario: Dealer's Scenario where during PO creation we don't know excise Amount and we consider PO price to include excise. Apart from excise we have CST. Excise and CST both will be inventorised.
Example: PO = 5000 (Inclusive of excise) on which CST is 1 % = 50
Now during MIGO I apply MRP tick which Splits PO base value and excise. Say 1000 is excise out of 5000.
GRN should be of 5050 ideally but the ISSUE is system posts it for 5060 Rs i.e on 1000 again system calculates CST 1% and adds it during GRN.
Can anyone suggest what could be the reason for same and how to resolve it ? Is there anything with tax code creation, tax procedure or MM pricing procedure ???
Br, Deepti

Hi Deepti,
Creation of Purchase order inclusive of Excise Duty. @ 5000/- .
2. The Duties should be Inventories. But you cannot show actual Duties at time of PO.
In FV11, maintain 0% for Inventory Duty conditions. Maintain 100% for Inventory Total conditions and also maintain CST condition.
Display Taxes
3. In MIGO Base will default as PO Price, We will change it to Actual as per vendors Invoice also Enter BED,Ecs,Seces as per Invoice. Do NOT tick MRP indicator.
4.Accounting Entry for GRN
Regards,
Sachin Indulkar

New tax code for non excisable plant

Dear all
Please suggest solution for following scenario
We created new comp. code and assign new plant, this plant is non excisable, my problem is that can I used same tax code which is I created earlier for first co. code or I have to create new tax code for new plant, these taxes I have to inventories on material, I am using tax inn and tax classification ***.sequence.
Vipin

Hi Vipin,
from my point of view you can use the same tax codes.
to inventorise the duties you have to make little change in the process.
while doing GRN if the material is excisable then the tabs will open. now you have to go to excise item tab and there you have to choose noncenvatable in the dropdown menu that is the material type.
in this way you can have the results you need.
regards,
Adwait Bachuwar

Tax codes for capturing excise duty

dear all,
how to create taxcode for capturing excise duties and where to link them for capture of excise invoice.
thanx in advance.
velu

Hi Velu
use T-code FTXP to create ur tax code. If u r using TAXINJu will maintain % while creating tax code, or if u r using TAXINN u will maintain zero tax.and save it.
this zero tax code you will use when u maintain tax records- tcode:FV11
Assign the tax code for the country.
Assign ur TAXINN to the country.
Create a record for the matl, vendor and maintain the price for ur condition type.
Create a PO ,system automatically picks the price from the record.
save the po
capture the tax using T-code: J1IEX_C and save.
after that do MIGO or while receiving the matl itself you can capture, based on customization.
Rewards if useful
Regards
Viru

Wrong Vendor Invoice Posting Due To Wrong Excise Tax Code

Hi:
We have created a Purchase Order as per below:
Qty     10
Price     100
Value     1000
Excsie 10%     0
Cess     0
SECess     0
Value+Excise     1000
VAT 5%     50
ValueExciseVAT     1050
(Please note that the PO was to be created in the following fashion as the Material was excisable)
Qty     10
Price     100
Value     1000
Excsie 10%     100
Cess     2
SECess     1
Value+Excise     1103
VAT 5%     55.15
ValueExciseVAT     1158.15
We did the Goods Receipt and the FI Document is as follows:
24340000     Paper Stock     BSX     1,000.00
13110100     GR/IR-ext proc     WRX     1,000.00-
We did the Vendor Invoice Posting as follows:
100183     SIEGWERK INDIA PVT LTD (SICPA)     KBS     1,050.00-
13110100     GR/IR-ext proc     WRX     1,000.00
24638100     VAT Recoverable     JP5     50.00
The Material was issued to Cost Centre
Later at the time of Excise Invoice posting, we came to know that the Tax Code in the Purchase Order was wrong. Here in our case, we have created separate Tax Code based on Excise Percentage. For example, V1 for VAT 5%, E1 for VAT %+Excise 10.3%.
To post the excise invoice, we changed the Tax Code in the Purchase Order and did the Excise Posting as follows:
24820020     CENVAT Inp SHEcess     1.00
24820000     CENVAT Inp BED     100.00
24820010     CENVAT InpEcess     2.00
13113920     CENVAT clearing     103.00-
My Question:
a. Is this the correct way?
b. What about the following FI Entries which got generated when we do the MIRO with actual Tax Code:
100183     SIEGWERK INDIA PVT LTD (SICPA)     KBS     1,158.15-
13110100     GR/IR-ext proc     WRX     1,000.00
13113920     CENVAT clearing     JI1     100.00
13113920     CENVAT clearing     VS9     2.00
13113920     CENVAT clearing     JI6     1.00
24638100     VAT Recoverable     JP5     55.15
Please guide.
Regards,

Thanks Sanjoo for the reply.
Here my worry is the all the postings have been made in SAP in Production Client.
The User has already done the postings for MIRO & J1IEX without informing to us, and the volume of transactions is huge.
We are in the back-log mode and at this stage, we can't go for any reversal . I am Just exploring the alternatives.
Our MM & FI Users are little bit smart, when ever they do some mistake, they simply say "we will pass a JV" and we are not able to educate them that the JV is not a Solution. Please guide.
Regards,
PK

Issue in MIRO for inventorized excise tax code

Hi,
I have created a PO with excise tax code, but the excise amount to be inventorized,
PO price   : 100
EXCISE         10
ECESS          0.20
SECESS        0.10
VAT              13.79
Total net amount   100 and tax amount 24.09
   now as the excise condition are mark as non deductible so after GR the material and GR account are posted with the amount 110.30, base price + excise tax amount which is OK. But when I am doing the MIRO I enter the total amount as 124.09 on the miro screen then selected the tax code as per PO then material it is showing with amount as 100 insted of 110.30, because of this it is showing some balance differene , which i need to correct manually.
   Is there any option for this I want to create PO with same procedure with excise tax code which is to be post to inventory but in MIRO i want to avoid this manual correction.
regards,
zafar

HI,
But when I am doing the MIRO I enter the total amount as 124.09 on the miro screen then selected the tax code as per PO then material it is showing with amount as 100 insted of 110.30, because of this it is showing some balance difference , which i need to correct manually.
why 124.09 vat also want to inventories ?
try this click on calculate tax icon in MIRO and check it
Regards
Kailas Ugale

Excise tab not required in MIGO if Inventorised tax code is used

hi expert
Can we define systen if if Inventorised tax code is used ,Excise tab not required in MIGO .
regard
Nabil

Hi,
as per me excise tab depend on J1ID setting, you know this
Not on tax code or on condition
Regards
Kailas Ugale

TAXINN SD For Excise Duty where to maintain TAX CODE in condition record?

is Tax code necessary for excise determination in TAXINN in SD Scenario? While maintaining condition record ( JEXP) for Excise access sequence JEXC doesnu2019t has Tax Code field Whereas for Sale Tax determination ( JCST/JLST) access sequence JLST /CST which has Tax code field . (In TAXINN we create Dummy tax code (blank))
is it true whatever I have written ? If yes then what is use of tax code where it triggers in FI Posting? Why we use only for Sale Tax not for Excise duty?
If u go to SAP Std condition type & access sequence provide for CIN in SD (TAXINN) While maintaining condition record ( JEXP) for Excise. Access sequence JEXC doesnu2019t has Tax Code field . do u think we should modify that create field for Tax code ..... Pl check in system & answer the question .......I hope u understand what i want to ask.

Hi,
As per my knowledge, Excise is not Tax its a Duty....
Excise gets added to your base price and the tax is calculated on the whole amount and not only the basic price.
Say if u r manufacturing a material and u r under excise regulations, then without paying excise duty you can't move the goods out of your premises, Here even before you sell the material to a customer the excise duty is paid from you. But when u will be selling the material to a customer, the customer is charged the excise duty which gets added to the net value and then the sales tax is calculated.
If u see a sale order condition tab page, there are two fields
1. Net Value 2. Tax
Net value is the value which includes the excise duty and the tax is only the CST/LST/VAT.
Regards

Tax Code At PO Level

Hi All,
System does not allow to use different tax code (For both Excisable Item and non-Excisable Item) in a single PO.
System should throw error at po creation level.
Santosh

Hi All,
User does not want to pass the bill for the PO having excisable and non-Excisable item clubbed together.
For ex- In a PO, user want to generate a PO for 2 item (excisable and non- excisable item) with diff tax code.
User want to check it at Item level. Either we need to check, system should not allow both item in a single PO or need to check
tax code if it is different for both the item
How to handle this scenario at PO level.
Santosh

Error while posting A/R Downpayment Invoice with Excisable Tax Code.

While posting A/R Dowpayment Invoice with Excisable Tax Code error of "Unbalanced Transaction" appears. This error does not occur while posting A/R Downpayment Invoices with Non-Excisable Tax Codes.
Kindly provide a solution for the same.

SAP Note Number: 1179405
Error -5002 when trying to copy a document with Sales BOM
In order to create the delivery via the DI, you need to set the oDoc.Lines.BaseLine value to the LineNum value from the RDR1 table (in the above example you should enter the value 2).
we set oDoc.Lines.BaseLine=0 before starting the lines loop. This has resolved the issue.
This note was really helpful and it was found in another query.
You can also refer to this. https://forums.sdn.sap.com/click.jspa?searchID=19070513&messageID=6178079
Thanks.
Edited by: Sadanand Manda on Nov 24, 2008 12:16 PM

Error in PO Creation with Excise Tax Code

Dear
I am getting the following error while creating a PO (in sandbox) in MM.
No posting rules exist for account key
Message no. FF714
Diagnosis
No posting rules have been defined for the account key in the tax table in table T007B.
Procedure
Change the tax table, enter an account key already defined for the transaction in question or define the posting rules for a new account key in table T007B.
In sand box, I am making use of VS1(Condition Type JMOP)(10%), VS2(Condition Type JAOP)(2%), VS3(Condition Type JSOP)(1%) & JP5 Condition Type JVRD)(4%)Account keys with deductible nature in one tax code V8. In OB40 GLs are defined. Posting keys 40 & 50 are given. In GL master all tax types allowed * is also given. Also excise data is maintained in the vendor master.
I am not getting the above error if I make use of any other tax code with only one percentage and one condition type. I am getting the above error if make use of the above tax code V8 which is created for excise.
Inputs are hightly solicited.
Regds

Check this thread
[No posting rules exist for account key|No posting rules exist for account key]
Alternatively, check the following notes which may help you
=> Note 27350 - Missing account key
=> Note 32828 - Termination with FF714 when posting with FB01
thanks
G. Lakshmipathi

Regarding Error in Tax Codes after Creation of Excise Invoice.

Dear All,
We are using TAXINN Procedure,I have maintained condition records and given the correct tax codes in them for Basic Excise Duty,Secondary Cess and Higher Secondary Cess on the table 357,however after checking the accounting document which is created post creation of excise invoice the wrong tax codes are getting picked up however when i create my commercial invoice and check the tax codes the correct tax codes are coming,please advice what needs to be done to rectify this error.
Best Regards
Atul Keshav

This query is now resolved

Error in Tax Code after Creation of Excise Invoice

Dear All,
We are using TAXINN Procedure,I have maintained condition records and given the correct tax codes in them for Basic Excise Duty,Secondary Cess and Higher Secondary Cess on the table 357,however after checking the accounting document which is created post creation of excise invoice the wrong tax codes are getting picked up however when i create my commercial invoice and check the tax codes the correct tax codes are coming,please advice what needs to be done to rectify this error.
Best Regards
Atul Keshav

Hi
If you are using TAXINN procedure, check apart from VK11 check you have maintained TAX CODE for excise condition types. Example FTXP or VK19 (using application as TX). Also check whether you are using UTXJ condition type. If you are using UTXJ condition type then please remove it.
For TAXINN you need not have UTXJ condition type.
Regards
MBS

Excise tab not required in MIGO if tax code is different

Hello,
There is one business requirement
we have two special type of TAx codes. If material is maintained in J1ID with chapter id combination.
then system will propose us the excise tab in MIGO (ECC 6.0).
My requirement is if suppose we used the "Y1" tax code then system should not propose the excise tab in MIGO.
what happen stores person does not know for which material he has to capture the excise. every material he has to capture the excise.
This same material some time we have capture the excise(based on tax code) so that is the reason we have maintained this material in J1ID.
how to do?

HI,
Use two different Tax code. Let's A for used as dedectable Tax(Convet Benefit)
A should have Coditions like this
Deduct able tax:-
          JMOP    - IN BED Settoff %
          JEC1     - A/P Edu. Cess Settoff
          JSEP     - IN A/P H Ecess Setoff
          JVRD   - A/P VAT RM Deductable
Also maintain its settoff 100% for all the condition Type.
JMX1 --     IN: A/P BED setoff
JEX1 ---      Ecess Setoff Sta
JHX1     IN: A/P SECess SOTot
Now for Non-deductable Tax(Inventrised) suppose ur Tax Code B
B should have condition Like this
JMIP - IN BED
JEC2 - A/P ECESS
JSEI - H Ecss
JVRN - Vat
Now in SPRO --> Logistic General --> Tax on Goods Movements --> Basic Settings --> Determine of Excise Duty ---> Condition Based Excise Determination -->Assign Tax Code to Caompnay Code.
Here give the Tax Code that CENVAT benefit.
Regards,
Pardeep malik

FI-AP Tax Code not considering the excise duty while calcuating the VAT

Sub: A/P Tax Code not considering the excise duty while calcuating the VAT
Hi Frnds.
I have a typical problem.
Till now we are using a "W6" as a tax code, where Excise-10%, Ed Cess-2%, SEd Cess-1% and VAT-4%.
But as the Govt. rules changed I have created a new tax code "W8" by copying the W6 and modified the VAT to 5% by changing the condition record JVRD.
The new tax code is not calculating VAT part correctly. It is taxing into consideration Invoice Base value, Ed Cess & SEd Cess (Omiting the Excise Duty).
I have checked my Tax Procedure, there everything is fine. Even my old tax code "W6" is working correctly.
Let me know where the error lies.
Here is the scenario
00. Tax code                       -   W6   -   W8   - Current Staus of W8
01. Invoice Base               - 355181 - 351798 - 353324 (by SAP Document Simulation View)
02. Excise @ 10% on 01.        - 35518 - 35180 - 35332
03. Ed Cess @ 2% on 01.        -    710 -    704 -    707
04. SEd Cess @ 1% on 01.       -    355 -    352 -    353
05. VAT @ 4% on (010203+04) - 15671 -   0     - 0
05.    VAT @ 5% on (010203+04) -    0    - 19401 - 0
05.     VAT @ 5% on (010304)     -   0     -    0    - 17719
INVOICE TOTAL VALUE            - 407435 - 407435 - 407435
Pls. let me know how to come over the issue.
By the way I am using the above tax code at FB60 transaction code.
Regards
Krishna
Edited by: Gopi Krishna Gutti on Oct 17, 2011 10:18 AM

Hi Vivek
Acutually we planned to implement SAP - FI & MM Modules only, and all the configuration is done in the system, but at the final stage our management is not satisfied with MM area, so finally we have gone live with only FI Moudle.
By the way thankyou for the reply. I have maintained 100% in JMX1 for the new tax code and it is working fine.
I will give you full points.
Once again thanks a lot.
Regards
Krishna

Tax code releated to excise

Similar Messages

Maybe you are looking for