Tax condition not copying to invoice from sales order
Dear All
I have created condition record fro material. In that i have mentioned tax condition types.During Sales order creation the tax condition type copying into sales order. But from sales order to invoice it is not getting copied.Kindly guide me.
My order type is OR and my invoice type isF2.
Shobana
Dear Shobana
Go to VTFL, select the combination of your billing type / delivery type and select "Item" tab on your left screen. Now select the item category and click on blue lens on top left.
Here see what is maintained for the field "Pricing Type". Please maintain "B" if this is not maintained and retry.
thanks
G. Lakshmipathi
Similar Messages
-
Condition type - Freight value is copied into invoice from sales order
Hi All,
I have a Issue while copying freight value to Invoice.
I have created Freight condition type - XYZ where i have maintained "Group condition, Header condition & Item condition" in the definition of the condition type.
I have placed this condition type in Pricing Procedure (Ex: ABCD) and also in Delivery Pricing Procedure (PQRS) - Checked "Manual check box".
When i place this manual condition type in Delivery --> conditions tab(Item level), then it is copying to Invoice. However when I am placing this condition in Sales Order it is not copying into Invoice???
I have maintained copying control between delivery document and Billing document and I have maintained "Price Source" as E - Delivery/Order.
My requirement is when I am maintaining Freight value in delivery, then it has to consider the Delivery Freight..If freight is not maintained in Delivery then it has to copy from Sales Order?? Is it possible ?
Please help me in this regard.
Thanks in Advance.Hi,
Thank you very much for your response.
If i used price source as "D" then other conditions like price & tax are not copied sales order. Freight value is copying from delivery. I want system has to consider the sales order in case of freight value Zero in delivery. -
Copying Profit Center from sales order to Purchase order
Hi Champs,
Please let me know if anyone has implemented this scenario of copying profit center from sales order to purchase order and then to goods receipt.
Thanks
PirzadaHi,
Profit center flows from material master to other documents such as PO,SA GRN and MIRO.Please let me know what are you looking for? -
User exit to copy the data from sales order to billing document
hi everyone,
Is there an user exit to copy the data from sales order to billing document?
Regards
Prabudhhi
copy control would be the better option to choose.. but still u can a give a search in list below and opt for the right one..Refer to the link below..
http://www.planetsap.com/Userexit_List.htm
User exits for Sales order
1USEREXIT_DELETE_DOCUMENT
2USEREXIT_FIELD_MODIFICATION
3.USEREXIT_MOVE_FIELD_TO_VBAK
4.USEREXIT_NUMBER_RANGE
5.USEREXIT_SAVE_DOCUMENT
User exits for billing
1.USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
2.USEREXIT_ACCOUNT_PREP_KOMPCV
3USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
4USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB
5.USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Reward if Useful
Thanx & Regards..
Naren.. -
User-exit to copy collective number from sales order to purchase order
Hi,
Can any one help me which user-exit/BADI is used to copy collective number from sales order to purchase order? please help me.
Thanks,
Alkahi
copy control would be the better option to choose.. but still u can a give a search in list below and opt for the right one..Refer to the link below..
http://www.planetsap.com/Userexit_List.htm
User exits for Sales order
1USEREXIT_DELETE_DOCUMENT
2USEREXIT_FIELD_MODIFICATION
3.USEREXIT_MOVE_FIELD_TO_VBAK
4.USEREXIT_NUMBER_RANGE
5.USEREXIT_SAVE_DOCUMENT
User exits for billing
1.USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
2.USEREXIT_ACCOUNT_PREP_KOMPCV
3USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
4USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB
5.USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Reward if Useful
Thanx & Regards..
Naren.. -
Append condition type to Invoice from sales order
Hello,
We have some condition types which are entered manually in sales order. When invoice is created, we want to copy the data of these condition types to the invoice.
Pricing procedures are different for sales order and invoice.
So how can we achieve this functionality? 1) copying requirement 2) BADI or 3) any formula.
Please advice.
Rgds,
AnandHi Anand,
this is done through copy control.Tcode-VTFA [sales order to invoice].Here u maintain ur source document i.e ur order type, destination i.e invoice type.give ur item category and then set pricing type as - C [copy manual pricing and redetermine tax] .all the data will be copied from sales order to invoice irrespective of ur different pricing procedures.
Assign points if helpfull.
Regards
sharad
Edited by: Sharad Kaliya on Aug 1, 2008 8:22 AM -
My requirement is to get invoice from vbfa table by delivery no., where vbtyp_n is M or N. But there are some deliveries which vbtyp_n is not 'N', then to get those invoices:
I went to lips table retrieve sales order and item(vgbel, vgpos) for a particular delivery.
then I went to vbrp table to get the invoice by sales order and item.
But my question is performance is not good in this way, Is there is any better way to achieve this? Your inputs please.
Thanks
ShailajaHi,
You are right,
Instead of using the relationship between LIPS and VBAP
LIPS-VGBEL = VBAP-VBELN and LIPS-VGPOS = VBAP-POSNR (order related)and
VBRP-VGBEL = LIPS-VBELN (delivery) VBRP-VGPOS= LIPS-POSNR and
VBRP-AUBEL = VBAP-VBELN (Order) VBRP-AUPOS= VBAP-POSNR
it is advisable to use VBFA to fetch the linked documents since it is faster.
so to get the billing doc for the sales order from VBFA
pass Preceding doc type = C and Prece doc no = Sales Order
and subsceeding doc type = M and you will get the billing doc for that sales order.
To get the delivery for sales order pass the Subsceeding doc = J to VBPA
hope this is usful
reward points if useful
regards,
ANJI -
Copy Formatted Searches From Sales Order To AR Invoice
I have a series of formatted searches attched to the Sales Order. Is there a way to copy these to another document program like the AR Invoice without having to manually assigning them to each individual field.
Thanks,
Tom Arnold - ECSThomas,
I don't think Copy Express is the tool for this. Copy express is mainly used to company Configuration, User Settings, PLD, etc from one company DB to another.
To copy FMS from one document type to another is a manual effort. You need to manually open the document and link the FMS.
Also make sure that the if the FMS has form refereces they should be Dynamic. What I mean is...If you are referencing the CardCode on the Sales Order...you SQL code should not have syntax $\[ORDR.CardCode]...This will only work on the Sales Order.
You need to make it generic....$\[$4.0.0]..this way it will refer to the Card Code when added to any marketing document.
Suda -
To Remove Discount Condition Type In Invoice from Sales Order
Hi All,
For my sales order I have the net price and discount but when I create invoice, I would like the discount to be removed automatically. May I know how can I configure that other than remove the item line manually.
Kindly advise.
Thank you!
Regards,
YvonneHello,
Do you want to delete Discount Condition in Invoice & its effect should not happen on Invoice Amount calculation?
If the above is your requirement, then have two seperate Pricing Procedures for Sales Order & Invoice.
Both these Pricing Procedures will have same Condition types & other settings except the Discount Condition will not be present in the Invoice Pricing Procedure.
Define a new DoPP for Invoice Document Type & maintain Pricing Procedure determination (Sales Area + CoPP + DoPP).
Thus while creating Invoice, the Discount condition & its value will not appear in Invoice.
Hope this helps...
Thanks,
Jignesh Mehta -
Copying Pricing date from Sales Order to Invoice
Hello,
I am trying to copy pricing date at line item level from sales document to invoice. Currently I have a pricing date of 04/02/2015 in sales order line item, but in invoice, the same line item pricing date is coming up to be 04/08/2015. The pricing date is defaulting to when the invoice was created.
How can I change the pricing date of the invoice so that it matches sales order pricing date?
Thanks,
BrijeshHello Shiva,
The line item I am looking at has the item category of Z0N1 (used for Stock item), but when I go into copy control using tcode (VTFA) under item level, I don't see this item category as one of the options for selection. Is that normal?
Thanks,
Brijesh -
Error while creating AR Invoice from Sales order
Hi All,
I have created a sales order ,when i try to create AR Invoice through Copy To option i am getting an error
Business partner of copied down payment document must be the same as business partner of target document
Please help me to solve this issue
Thanks in Advance
Regards
ArunHi Arun,
Check if you have Down payment AR Invoice created from this Sales order.
Thanks,
Gordon -
Creation of Invoice from Sales Order
Hello Gurus
I have to create Invoice against the Sales Order. I do not want the delivery document. I just want to save the Sales Order and raise the Invoice against the Sales Order. What are the necessary configuration steps to achieve this?
I really appreciate any kind of help.
Thanks
RajeshHi Rajesh,
Order Related billing is when we bill directly as per the order no delivery needed or involved
Eg; Service's items here there is no delivery involved hence
after order directly billing is done
In order related billing, the Invoice will be generated with reference to the order. Example... For service relevent scenario we will be doing the order related billing because there is no physical goods movement happens. (doing some repair).
Try with below :
In vov7 for the item cat---billng relevance maintain order related billing. In vovg against the order type mention the order related billing type. Maintain the copy controls.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula -
Unable to copy line item from Sales Order [ZPLV] to new Sales Order [ZPCV]
I have here a requirement to create a new Sales Order[ZPCV] with reference to the previously created SO[ZPLV].
I looked in transaction code VTAA, and the configuration for the aboves condition is:
target sales doc type - ZCPV from sales doc type - ZPLV
dataT: 302, 907 and 001 respectively
copying requirement: 001
copy item number is checked
complete reference is checked
is there something wrong with the configuration?
please advice!
thanks,Hi
For those line items you can assign a REASON FOR REJECTION. Automatically the status of those line items will be closed.
Thanks,
Ravi
PS : sorry....please ignore my post.
Edited by: sankar ravi on May 20, 2008 3:45 PM -
Copy partner function from sales order to WBS element
Hello
Does someone know if it is possible to copy the partner function and its assignment from the sales order to the WBS element?
In our project, we create sales order with article having a strategy group (85) view MRP3. Thanks to that a network and a WBS element is created in background based on template. In the template a partner determination procedure is maintained => partner tab in the WBS element is displayed (CJ20N) but the partners maintained in the sales order are not populated.
Is something missing in the customizing?
Is it possible to do it in standard?
Kind regards
ChrisHello Tison.
I guess you have the Project created with a BAPI in your system in background. As far as I have seen I'd try the following in ABAP to create Partners in the Project Definition: BAPI_BUS2001_PARTNER_CREATE_M or the corresponding method ProjectDefinitionPI.PartnerCreateMultiple. This should happen in background when the Project is created also.
Best regards.
Jens Schmid -
Copy variant characteristics from Sales Order/Item to Production Order
Dear All,
I have a requirement wherein I have to copy variant characteristics fromSales Order/Item to Production Order. In this regard I was looking at Enhancement "CLFM0002". Is it possible to copy the variant characteristics automatically from the Sales Order/Item to Production Order?
Thanks,
Pravat.Pravant,
If you are implementing Variant Configuration, or using configurable material in that case you will have to maintain
Characteristics in CT04
Classes in CL02
Configuration Profile CU41
The material that you are mentioning must have class and charcteristics activated or mentioned in material master. undre classification view. In production you maintain Configurable material BOM we will be using the same material
Regards
Sathya
Maybe you are looking for
-
I recently bought a nikon D800E and i'm having problems saving after editing. Also finding some tools are slower. My Alienskin plugin is freezing and even shutting down. I have a 2010 iMac 27". Is RAM my problem or should I upgrade SSD? I have 8GB RA
-
As a regular practice we are allocationg the material via t code CS40 but as an observation we found material not allocated to BOM and while saving it is prompting with below message Message NO 29250 You want to copy material XXX to an additional i
-
Verizon canceled my iPhone 6 Plus order, suddenly says I'm ineligible for Early Edge
I ordered an iPhone 6 Plus on 9/19 (and also a second iPhone and new line for my wife). The expected ship date was this week. I checked on the status yesterday only to discover it was canceled. Needless to say, I was upset and called to find out why.
-
J2EE agent deployment failed due to authentication error
Hi All, I had deployed java agent long back in weblogic domain, and was able to connect and execute odi scenarios using this java agent. Recently i have changed masterrepository password and as well SUPERVISOR password. While starting agent applicati
-
N70 phone software updater will it support arabic
i have n70 with late software version, i downloaded the latest software updater but i am wooried the new software shall not support arabic language specially that all my contacts and keypad is in arabic... is this true??