Tax config steps for women in ecc 5.0 version
Hi to all Guru's,
I want to configure tax for women in ECC5.0 VERSION.
The tax tables are V_T7INT1 AND V_T7INT3.
in V_T7INT1 i have maintained tax code for men and in V_T7INT3
I have maintained tax slabs for the men for corresponding the tax code.
But i am not gettng how i have to configure tax slabs for women in ecc5.0 version.
in ecc5.0 version we dont have drop down slab type for men and women like in ECC6.0 VERSION
Please let me know the config steps needed for tax calculation for women.
Thanks
Priya
Hi sameer,
I searched all the notes but i am not gettng that note for ECC5.0.
Please suggest me some note numbers so that i can go through it?
Thanks
Priya
Similar Messages
-
Config Steps for Tax Depn in AA
Can somebody share config steps for-Calculating tax depn
so i require config doc step wise and also execution steps to calculate tax depn.
my email id is [email protected]Hi sameer,
I searched all the notes but i am not gettng that note for ECC5.0.
Please suggest me some note numbers so that i can go through it?
Thanks
Priya -
What are the config steps for contract mass change and quota arrangement?
Hi friends
what are the config steps for contract mass change and quota arrangement?
Regards
Raj KumarProcess Flow
The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
1. Search for contracts
You search for and select the contracts or the contract hierarchy that you want to change.
Contracts that have the status Closed cannot be changed.
2. Define mass changes
You specify the changes you want to make.
You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
3. Simulate mass changes
Here you can perform a trial run of your mass changes. This simulation step is optional.
We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
Background processing
The system processes the changes in the background.
If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
4. Carry out mass changes
Here you apply the changes to the contracts.
You cannot reverse this step, which is why we advise you to perform the simulation step beforehand. -
What are the config steps for contract hierarchies and vendor hierarchies?
Hi friends
what are the config steps for contract hierarchies and vendor hierarchies?
Regards
Raj KumarContract hierarchies
A function that enables users authorized to create a purchasing contract to define relationships between super- and subordinate contracts.
A contract hierarchy consists of one or multiple contracts and is subject to the following rules:
The top node of the hierarchy cannot have a superordinate contract
Every contract except for the top node has exactly one superordinate contract
Every contract can have none, one, or multiple subordinate contract(s)
A contract can be part of no hierarchy or exactly one hierarchy
Note:Contract hierarchies are only available for purchasing contracts. They are not available for global outline agreements.
You can activate this from SRM Server> Cross application settings>Activate Hierarchies for Product Categories, Vendors, and Contracts.
Note:
These hierarchy functions should not be reset once they have been activated.
Similiarly you can do this for Vendor Hirerachies.
Please visit link for more details: http://help.sap.com/saphelp_srm50/helpdata/en/43/2022b83fbc2be8e10000000a11466f/content.htm
Thanks -
Config steps for low value assets
could any one provide me the config steps for low value assets.
regards
RamanaHi Ramana..
there is diff in config for LVA from others..all it differs is the Dpe. Key.
LVA depreciates completely in the same year as Acquired
let me knwo if u need anything else
regards -
Need config steps for Multi-Mode Transportation in SD
Hi Gurus,
I am implementing Transportation Module in SD , I covered domestic part means Single mode .
But Now i have complete Multi-Mode Transporatation for Export , contains Rail, Ships, i.e Multimode Transporation ,
Please give me Config. steps for it
Thanks
Devdatta JoshiCheck if the link below is helpful:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LETRA/SDTRA.pdf
Regards,
Rajesh Banka
Reward points if helpful. -
Hi,
Request you to kindly forward me the config steps for LOP.
Thanks & regardse
Please take the search forum help before posting the still if you not able to find will share you the issuesame like the normal absence
but u include that absence
in valuation of absence T554C check
or else
PAY ROLL PAY ROLL INDIA Absence for Valuation -
Config steps for regular ofcycle payroll
Hi All,
plz let me know the config steps for regular ofcycle payroll
SDHi,
1) Firstly follow the IMG Menu path PM>PA>Payroll data>Additional Payments-offcycle>wage types
Create ur desired wage types for off-cycle and configure them accordingly
2) Now IMG >Payroll>India>Off-cycle activities>
Configure as u need
Maintain IT 0267 with entries like Off cycle reason.... Identifier...... Amount ..... Date...etc.
Run payroll with the parameters u have maintained in IT 0267
Try and revert back if any dificulties
Nasim -
Config Steps for Pick process from warehouse number
Dear Gurus,
Need the config. steps for picking process with warehouse number assignments
ThanksHi,
You only need to assign a Warehouse number for the combination of Plant and Storage location in SPRO in assignment of organisational structures in Warehouse Mngt. If this is done, then picking will become mandatory and you can do picking either manually or automatically through LT03 or other transactions.
If this warehouse assignment is not done, then you can put the picking quantity directly in delivery and do PGI. If this assignment is done, then you will be able to do picking only through transactions like LT03, either in foreground or background. In this case, u will not be able to manually update the picking quantity in delivery.
Hope this helps. -
Defaults for IT0016 for China in ECC 6.0 Version
Hi Friends,
Greetings to All !!
I have a requirement to default the values (Contract Type, Probationary period, EE & ER Notice Period) in IT0016 for China in ECC 6.0 Version. We tried to create these defaults through CONTR feature, but failed to achieve the solution.
Actually, MP001600 screen is been replaced by MP321100 for China in the upgraded version of ECC by SAP.
Could anyone help us with the solution, how to create defaults for this infotype 16 for China in ECC 6.0 (for screen MP321100)....
Thanks in Advance,
Regards,
P Sai NarayanaYes Mr. Kumarpal,
SAP has provided new screen MP321100 for China in ECC 6.0. If you want further details, please check in the SAP Note 1286584.
Because of this new change, CONTR feature is not working properly, as expected for china. Please find the details of the Note below.
SAP Note 1286584 - CN IT0016: Old Notice Period Information Are Not Displayed
Summary
Symptom
After the legal change for China New Labor Contract Law, the Contract
Element Infotype (IT 0016) for China start using a new screen. The
Employer/Employee Notice Period fields are chaged to number and unit input
instead of the old code/description input. This is required for payment in
lieu of notice calculation.
The old fields are no longer displayed in IT 0016 for China. However
customer had maintained information in the old notice period fields might
need them as a reference to update the new fields.
More Terms
Notice period, IT0016, Contract Management
Cause and Prerequisites
This is an enhancement of the screen.
Solution
Apply the HR support package or the correction instruction of this note.
The old notice period fieds (P0016-KDGFR and P0016-KDGF2) are drawn on the
screen as invisible fields. Customer can update the setting in maintenance
view V_T588M for module pool MP321100 to set the fields as "Optional
Fields". Thus these two fields can be shown on IT 0016 screen.
Thanks,
Sai
SAP HR Consultant -
Prerequisite config steps for creating a lease-in contract
Hello Gurus,
Could anyone please advice on the config steps that are required for creating a lease- in contract.
Thank youHi,
Go through the below link for details :
[Generic Settings for RE-FX and complementary modules|http://help.sap.com/bp_bblibrary/600/html/D89_EN_DE.htm]
[Configuration |http://help.sap.com/bp_profservicev1600/ProfServ_DE/Documentation/D89_BB_ConfigGuide_EN_DE.doc]
VVR -
EDI Config steps for the IC sales invoice to post invoice receipts
Hi experts,
I need to setup EDI in which the Intercompany sales invoice in company A auto triggers the incoming invoice receipt posting in company B.
My scenario is as below:
1. Company C places a PO to Company B
2. Company B creates a sales order for Company C in which the delivering plant assigned belongs
to Company A.
3. Company A ships the parts directly to Company C
4. Company A bills intercompany B
5. Sales invoice created in step should auto create the incoming invoice receipt at Company B
6. Company B then bills Company C
I need to setup the above mentioned in step no:5.
Could you send me the configuration steps to establish the above?
Thanks for your great help !
Regards,
PriHi Prakash,
Thanks for your reply. Since there is no PO in this step which are the only required steps for me to
proceed with?
We already have the steps in our system which works fine for PO based invoice receipts.
With the steps to be there already in the system, when I try to post the intercompany billing & if I add
RD04 manually for now for my testing, it says
"No entry in Outbound table not found"
"No Partner profile (Outbound parameter) could be found using the following key,
//SI3300 / KU / RE / INVOIC / FI
I do not know where this Partner type RE comes from. Do you have any idea?
Regards,
Pri -
Guide me config steps for REceive and put away materials
Hi ,
I am new this module.
Please guide me all cofiguration steps for Receive and Put away materials in MM system.
Thanks,HI,
read sap help and search on Google.or in forum
[http://help.sap.com/saphelp_46b/helpdata/en/fd/45b7ee9d6411d189b60000e829fbbd/frameset.htm]
Regards
Kailas Ugale -
Config steps for one time customer
hi,
sap gurus,
can i have the configuration steps for one time customer.
regards,
balajiHi,
One-time customers
Customers who only enter into a business transaction with you once are called one-time customers in the R/3 System. It is not necessary for you to create a customer master record for individual one-time customers, since you no longer need this master record after the business transaction has been carried out, and it would use up storage space. You create collective master records for one-time customers.
Use
A collective master record refers to a dummy customer and includes only the data that is identical for a certain group of customers.
You create a collective master record for all customers in a certain region. This collective master record could include fields such as:
Master record name
Language
Currency
Sales office processing the customer data
If a one-time customer from this region orders goods from your company, you use the customer number of your collective master record when processing the sales order. Only in the sales order itself do you enter the address and all other data not given in the collective master record.
Structure
When you create a collective customer master record for a one-time customer, the account group CPD for one-time customers is automatically proposed by the system. This ensures that you can access screens from different partner functions (sold-to party, ship-to party, bill-to party, and payer) relevant for one-time customers. However, only fields that can be identical for all one-time customers are displayed. For example, all address fields are suppressed, since the master record is collective for data on several customers, all of whom can have different addresses.
On the following screens you can enter a limited amount of data in a collective master record for one-time customers:
Address
Sales
Shipping
Billing
Messages
Integration
The account group can restrict the number of screens accessed in the collective master record for one-time customers even further. If only some of the screens and fields for one-time customers are relevant for your company, change the account group CPD or set up a new account group. This is done in Customizing for Logistics Basic Data: Business Partners in the activity Define Account Groups and Field Selection for Customers.
regards
sadhu kishore -
Screen Exit / Badi for VF01 in ECC 5.0 Version
Dear experts,
I want to add some customized field(Bill of lading date) to the screen of billing header and the field should be displayed in the screens of t-code VF01 and VF02 always.
I found that the BAdi: BADI_SD_CUST_HEAD
But When I try to create implementation for the Badi. The following error is coming Badi definition BADI_SD_CUST_HEAD is only provided for SAP internal use. Our client using sap ecc 5.0 version.
Is there any screen exit or how to add a popup on the billing screen in user exit rv60afzc . Adding popup enter bill of lading date Causes any problems?
Pleaes give me ur help ASAP. Thanks a lot!Added zfiled in vbrk table.and user exit Called popup.
Maybe you are looking for
-
Sales order qty - Invpice qty - Creditmemo qty
Hi gurus, Our billing Scenario is Order related Billing. I created a sales order for 200 qty and i generated an invoice for 30 qty. due to some reasons i created a creditmemo request for 30qty and i created a creditmemo also for 30qty. Now i want to
-
Xorg flashing at start on Lenovo Yoga 2 Pro
Dear All, I am writing to describe a strange behaviour of X on my Lenovo Yoga 2 Pro, which I would like preferably to remove, but at the very least to understand. I installed plymouth. However, I witness a strange behaviour when plymouth closes an
-
How do I get my iphone 3g to print from my hpc8100 printer
How do I get my iphone 3g to print from my hp c8100 printer
-
Hello there. How do I create an apple script that switches between the default printers? I am using 9.2.2. I am not familar with apple scripts in OS9. Thanks
-
IPhoto won't recognize iPhones when connected
I have iPhoto 8.1.2 on my iMac, and all of a sudden it has stopped recognizing our iPhones when we plug them in. (Have tried three different cables on each of two iPhones - iTunes recognizes them, but iPhoto doesn't.) Is it failing all of a sudden be