Tax determination in sales document

Hello,
I have one issue regarding tax determination.
We have changes of tax conditions starting from 1st july 2010.
We setup new tax conditions within VK11 / MWST.
=> fine!
My scenario is:
- User created an offer (VA21) in june 2010 with old tax condition.
- Now in july 2010 e.g. user will create an order with ref. to that offer.
Problem: The order has the old tax code.
Tax is as I understood determined by "Service rendered date". As I do not have a service rendered date within offers I checked the behaviour of "Req. deliv. date" in the overview dialog of VA02.
When I change "Req. deliv. date" to july date and "carry out new pricing" tax is with new tax code.
As I cannot recommend to the user to always check "Req. deliv. date" and then do a "carry out new pricing",
I would like to ask you what the correct way is.
Thanks for your replies.

Hi,
first, let me thank you for your replies !!!!!!
@Azeez:
you said: "Kindly check the proposal for pricing date and proposal valid from date in VOV8 for document types"
=> They are set to BLANK and I guess copied from offer AG to order TA.
@JP:
you said: "Check Pricing date in Control data 2: for your condition type (Tax). For your case maintain that as D: Creation date (KOMK-ERDAT)."
=> It's set to BLANK as well. Means KOMK-PRSDT, tax KOMK-FBUDA)
=> I do not really know whether I can change this parameter, cause condition is used in other calc schemes as well
=> What is the effect of changing it to "D" ?
Thx
Wolfi.

Similar Messages

Output Determination for Sales Documents distributed by fax/email

Hi Experts,
Can some one guide me regarding what all need to be done to maintain output determination for Sales documents to be distributed by fax/email.
Thanks in advance...
Regards
Vamsi

Hi Vamsi,
Please go through this link it will help you about Output process in SAP R/3 for sales documents and billing documents.
http://help.sap.com/saphelp_47x200/helpdata/en/93/745017546011d1a7020000e829fd11/frameset.htm
I hope it will help you,
Regards,
Murali.

Error during material determination for sales document item - RRB

Hi
Iam getting following error when trying to create a billing request using DP91.
Error during material determination for sales document item 40001560/000010
Message no. AD01155
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
I have checked my DIP profile using ODP02 there are no errors in it, I have created a Setid and assigned it to costing element in selection criteria and material determination criteria.
Material origin is checked in costing tab in material master.
Appreciate help in resolving this.
thanks,
Vaishnavi

Hi Vaishnavi
The error which you are getting is related to costing.So kindly reach your FI Consultant
please check the following links which may help you.Also check the link that has been provided my Lakshmipathi
ERROR AT DP90 TRANSACTION
Regards
Srinath

Partner determination for sales document item

Hi people
We have a partner function in sales order (carrier) that must be determinate by item, this is necessary because we sell different materias in the same order that can't be transported by the same carrier.
In customizing Partner Determination for Sales Document Header is possible to use an user exit assign the origin X, Y or Z, in this case I would use the exit EXIT_SAPLV09A_003, but for partner determination for sales document item i didn't find a way to assign the origin X, Y and Z
Does anyone have an idea for solving this?
Thanks
Emerson

Whatever Partner functions are assigned to the Procedure assigned to the Sales document Type, only those partner functions will feature in the Sales document header.
In the procedure assigned to the Item category you will find like that 3 only only as in the Sales order you can not have different Sold-to-party for different Item.
Whichever Sold-to-party is there in the header that is applicable to all item. So at item level Procedure
sold-to-party partner function is not required to assign.
Sold-to-party is unique for a Sales order and can not be changed.
But at Item level, you can have different Ship-to-party for different items so the partner function has to be there and to deliver the item one SH is mandatory, that is why it has been marked mandatory in the Procedure.
All the partner function assigned to the Procedure at header level will be copied to all item. In your procedure for the header you must be having 5 partner functions.
You can change the SH at item level for few items.

Output determination when Sales document is Incomplete

Hi ,
I have a requirement, when the sales document is incomplete the outputs must not be determined.
I have set my requirement determination routine as 021: Order (Itm) incompl.
The routine code :
KOBED_021.
SY-SUBRC = 4.
CHECK: KOMPBV1-UVALL >< 'C'.
SY-SUBRC = 0.
ENDFORM.
FORM KOBEV_021.
SY-SUBRC = 0.
ENDFORM.
The value for KOMPBV1-UVALL is always NE 'C' enenthough the document is complete.
Can you let me know if it is a bug from SAP or any config issue.
Thanks.

cant you remove the redetermine pricing check flag in R/3? I guess this can be controlled in R/3

Output determination for sales documents

Hi experts,
I created an output type, copied from AN00, assigned it to an output determination procedure and assigned them both to my order type in V/43 and all is working fine.
I now need another output type for the same order type. So I have created a new output type and a new output determination procedure. However, the two new items I have created do not appear in V/43 and I do not know how to add them on.
Would anybody be able to offer a solution to my problem ?
Thanks
John

Well if you need two output types for the same sales order why do you want different two different output determiation procedures.V/43 is for determination of output procedure for the sales documents
Assign the new output type in the same output procedure procedure as step 2. like you maintain condition type in the pricing procedure and maintain the condition records in VV11. Now run the sales order. This will solve your querry.
Reward points!!!!!!!!
Thanks,
Kamal

Ouput determination for sales documents - Condition table

Hello All,
In the condition table I currently have the following fields - Sales org/Dist channel/Sales doc type/Order reason/User.
The field User is Created By VBAK-ERNAM. I want to change this to display the name of theperson that last modified the document. What field is this? CDHDR-USERNAME maybe?
And more importantly how do I go about making the change?
Would you recommend creating a new condition table?
Thanks in advance,
Suhas

Hi ,KIndly do the below settings
1.Delete the condition table from the access sequence :
SPRO-IMG-Sales &dist->Basic functions->Output Control>Out put determinationMaintain Output detrmination for sales documents---Maintain Access sequence
2.Then go to the condition table and delte the ERNAM and add the AENAM and generate .
SPRO-IMG-Sales &dist->Basic functions->Output Control>Out put determinationMaintain Output detrmination for sales documents---maintain condition table
3.Same condition table assign to the access sequence then access sequence will be assigned to out put type condition type
SPRO-IMG-Sales &dist->Basic functions->Output Control>Out put determinationMaintain Output detrmination for sales documents---Maintain output types.
4.Assign the out put type to the partner function
SPRO-IMG-Sales &dist->Basic functions->Output Control>Out put determinationMaintain Output detrmination for sales documents---Assign Output type to partner functions
5.Maintain the Out put type in out put determination procedure
SPRO-IMG-Sales &dist->Basic functions->Output Control>Out put determinationMaintain Output detrmination for sales documents---Maintain Output determination procedures
6.Assign out put determination procedure to the sales document type and item categoiry
SPRO-IMG-Sales &dist->Basic functions->Output Control>Out put determinationMaintain Output detrmination for sales documents---Assign Output determination procedures
OR
Delete the old condition table and create the new condition table and assigned to new access sequence.
REgards
Damu

Item Category Determination for sales document- Item USAGE

Hi dear all.
I read already the discussions held around this subject, as I'm facing a similar problem for which I cannot find a solution.
I have the need to set up a ItCat determination for sales order ZPD.
The proposed ItCat must be ZPDW. However, for the NORM ItCat Group we have already a setup which cannot be changed.
This is the present status.
SaTy ItCatGrp Usage HLevItCat Proposed ItCat
ZPD NORM ZPD
I need that the proposed ItCat is ZPDW, under the same conditions
SaTy ItCatGrp Usage HLevItCat Proposed ItCat
ZPD NORM ? ZPDW
For that I believe that I'll have to play along with the Usage.
But how?
What triggers an USAGE during sales order creation? Is it related to the entered material. In a NORM material, how can a usage be deducted?
Thanks for your feedback on this issue.
Rui Viegas

It is possible , either one of the item category u can make as proposed and another one as manual. So while creating sale order u need to change it manually
Sam

Tax determination for sales order

Hi,
As far as my understanding Tax classification for customer or material is responsible for determining the tax in sales order.
______________ Alt.tax classific ___ Tax classific _______ Taxcode ____________ Condition value
determined from Customer master___ Material master ___ Condition Record ______ Condition Record
___________________ 0 _____________ 0 ______________ V1 ______________   0%
___________________ 1 _____________ 0 ______________ V1 ______________   0%
___________________ 0 _____________ 1 ______________ V1 ______________   0%
___________________ 1 _____________ 1 ______________ V1 ______________   10%
Where,
0 - Exempted
1 - Taxable
- TaxClass1-Cust. in customer master (Sales area - Billing tab Taxes)
- Tax class. material in material master(Sales: Sales Org.1 - Tax Data)
2 point to confirm :
1 Can I confirm that ONLY these 2 (CMR and MMR) to determine that if the item is taxable or not?
2 If either one of them not 1, then it is not taxable?
Thanks

Hello Banniya,
In General - Yes. One this two (CMR & MMR) determines whether am Item is Taxable or not.
But if we get into specific country & regions requirements, there can be other factors. For example in India we need to consider the Region (State) of Dispatch & Region (State) of Receipt for determining the type of Tax (VAT or CST).
Further we many times also consider the Plant. Some plant are in Tax Free zones (SEZ, STPI, etc). Thus a though the material & customer are same, in some transactions there will be Tax while in some transaction there will be no tax.
Thanks,
Jignesh Mehta

Explanations on Sales Documents

Can anybody send explanations about sales documents that I have mentioned below?
Inquiry IN
Quotation QT
Free-of-charge delivery FD
Standard sales order OR
Cash sale BV
Rush order SO
Quantity contract CQ
Maintenance contract WV
Rental contract MV
Scheduling agreement DS
Credit memo request CR
Debit memo request DR
Subsequent delivery, free-of-charge SD
Returns RE

hi
==============================
can also refer to the link below for more info on SD ..
SD Process Flow
==============================
SD FLOW:
Sales
Inquiry - A customers request to a company that they provide a quotation or sales information without obligation. An inquiry can relate to materials or services, conditions and if necessary delivery dates. The sales area that accepts the inquiry becomes responsible for further processing.
Quotation - A quotation presents the customer with a legally binding offer for delivering a product or providing a service within certain fixed conditions. This offer is legally binding for the company within a specified time period. A sales area can reply to a customer inquiry with a customer quotation or use it to refer to a business partner contact.
Sales Order - Request from a customer to a company to deliver a defined quantity of products or provide a service at a certain time.
The sales area that accepts the inquiry is responsible for completing the agreement.
Create Delivery:a. Picking - The picking process involves taking goods from a storage location and staging the right quantity in a picking area where the goods will be prepared for shipping.
b. Packing - Packing is part of delivery- and shipment processing. When you process a delivery, you can select delivery items for packing and assign them to handling units (HUs).
c. Goods Issue - As soon as the goods leave the company, the shipping business activity is finished. This is illustrated using goods issue for outbound deliveries.
Billing - Billing represents the final processing stage for a business transaction in Sales and Distribution. Information on billing is available at every stage of order processing and delivery processing.
Sales Order Management Transactions
SALES ORDER PROCESSING
Creating Sales Order - VA01
Maintaining a Sales Order - VA02
Displaying a Sales Order - VA03
Releasing an Order or Delivery from Credit Hold: Non-Flooring - VKM1
Display List of RMAs by Customer - VA05
Confirm RMA Goods Receipt - VL02
Generate list of open return orders for deletion - VA05
Display Customer returns eligibility - MCSI
Removing a Billing Block (Approving Credit/Debit Requests) - V.23
PRICING MASTER DATA
Create Pricing - VK11
Creating a Sales Deal - VB21
Maintaining a Sales Deal - VB22
Displaying a Sales Deal - VB23
Maintaining Prices - VK12
Displaying Prices - VK13
MATERIAL MASTER DATA
Creating Material Substitution Master Data - VB11
Maintaining/Deleting Material Substitution Master Data - VB12
Displaying Material Substitution Master Data - VB13
Creating a Bundled Master - MM01
Creating a Sales BOM - CS01
Maintaining a Sales BOM - CS02
Displaying a Sales BOM - CS03
CUSTOMER MASTER DATA
Creating Partner Records - XD01
Maintaining Customer Master Data - XD02
Displaying Customer Master Data - XD03
Deactivating a Partner - VD06
CUSTOMER CREDIT INFO
Creating/Maintaining New Customer Credit Information - FD32
Displaying Customer Credit Information - FD33
Blocking or Unblocking a Customer - VD05
SHIPPING
Creating a Delivery - VL01N
Displaying a Delivery - VL03N
Changing a Delivery - VL02N
Shipment Inquiry / Display - VT03
Adjusting Transfer Order - Confirmation Quantity - LT12
Collectively Confirm Transfer Order - LT25
Batch Shipment Confirmation - VL19
PGI Reversal Cancellation - VL09
Creating Service Provider/Carrier Master Data - XK01
Maintaining Serive Provider/Carrier Master Data - XK02
Displaying Service Provider/Carrier Master Data - XK03
Maintaining Product Master/Serial # Profile/Unit of Measure/Shipping Unit - MM02
IDoc Inquiry - WE02 / WE05
BILLING
Invoicing a Customer Shipment - VF01
Reprinting an Invoice - VF31
Releasing a Sales Order for Billing - V.23
Creating an Invoice by Using the Billing Due List - VF04
Checking Open Billing Documents - VF05
Create Credit/Debit Memo - FB01
A/R
Controlling Total Debit/Credit bkgs - F.03
Generate FI Account balance - F.08
Generate Month-to-date Inv. register - F.02
Process payments - FBZ1
Rqst Individual Customer Corresp. - FB12
Generate Customer Correspondence - F.61
Enter Batch totals under Control ttl - FB07
Display G/L Acct. totals - FBL3N
Reverse Posted Amounts - FB08
Customer Refunds - FBL6
Customer Refund to other than Payer - FB05
Clearing Debit/Credit on Cust. acct. - FB1D
Customer Balance in Local Currency - F.23
G/L Account Balance Report - F.08
Create Invoice - legal entity adjust - FB01
Generate Cust. Acct. statements - F.27
Generate Dunning Letters - F150
Generate Billing Due List - VF04
Generate Blocked Billing Doc list - VFX3
Inq. via Credit Release Screen - VKM1
List orders by partner - VA05
Past Due invoices by customer - FD11
Check number info by G/L account - FBL3N
Display customer Line items - FBL5N
SD Configuration:
Enterprise Structure:
1. Maintaining Sales Organization
Sales Organization is an organizational unit responsible for the sale of certain products or services.
IMG -> Enterprise Structure -> Definition -> Sales and Distribution -> Define, copy, delete, check Sales organization
2. Assigning Sales Organization to Company Code
This assignment ensures all the sales made through this Sales Organization are accounted for in the assigned Company Code (Company Code is created by FI Consultant).
IMG -> Enterprise Structure -> Assignment -> Sales and Distribution -> Assign Sales Organziation to Company Code
3. Maintaining Distribution Channel
Distribution Channel is the way, in which Products or Services reach Customers.
IMG -> Enterprise Structure -> Definition -> Sales and Distribution -> Define, copy, delete, check distribution channel
4. Assigning Distribution Channel to Sales Organization
This assignment ensures, a Sales Organization can supply Materials to Customers through this Distribution Channel.
IMG -> Enterprise Structure -> Assignment -> Sales and Distribution > Assign distribution channel to sales organization
5. Maintaining Division
Division is a way of grouping materials, products, or services.
IMG -> Enterprise Structure -> Definition -> Logistics - General -> Define, copy, delete, check division
6. Assigning Division to Sales Organization
IMG -> Enterprise Structure -> Assignment -> Sales and Distribution -> Assign division to sales organization
7. Setting up Sales Area
All the sales are made from a particular sales Area. For creating a Sales Order Sales Area is compulsory.
IMG ->Enterprise Structure -> Assignment -> Sales and Distribution -> Set up sales area
8. Assigning Sales Organization- Distribution Channel- Plant
Plant is created ny MM Consultant.
IMG -> Enterprise Structure -> Assignment -> Sales and Distribution -> Assign sales organization - distribution channel - plant
9. Define Shipping Points
Shipping Point is the Organizational element, which is responsible for shipping the Materials to the Customers.
IMG -> Enterprise Structure -> Definition -> Logistics Execution -> Define, copy, delete, check shipping point
10 Assigning Shipping Point to Plant
This assignment ensures that goods from different Plant can be dispatched from different Shipping Points.
IMG -> Enterprise Structure -> Assignment -> Logistics Execution -> Assign shipping point to plant
Note: Ensure to do the undermentioned configuration also though it is not in Customizing node of Enterprise Structure.
11. Defining Common Distribution Channels for Master Data
Use
The purpose of this activity is to define distribution channels which have common master data..
Procedure
Access the activity using one of the following navigation options:
IMG Menu -> Sales and Distribution -> Master Data -> Define Common Distribution Channels
Transaction Code: VOR1
12. Defining Common Divisions for Master DataUse
The purpose of this activity is to define distribution channels which have common master data..
Procedure
Access the activity using one of the following navigation options:
IMG Menu -> Sales and Distribution -> Master Data -> Define Common Division
Transaction Code: VOR2
Pricing Procedure
In SD, Pricing Procedure is determined based on Sales Area (Sales Organization + Distribution Centre + Division) + Customer Pricing Procedure + Document Pricing Procedure. Sales Area is determined in Sales Order Header Level. Customer Pricing Procedure is determined from Customer Master. Document Pricing Procedure is determined from Sales Document Type / Billing Type (if configured). Once the pricing procedure is determined, Condition records are fetched. If appropriate condition records are found, the price is determined. If Mandatory pricing condition is missing, system will through an error message.
In SD, the steps to configure Pricing procedure are as under:
Step 1:
Condition table: If existing condition table meets the requirement, we need not create a new condition table. Considering the requirement for new condition table, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Table (select the required fields combination, which will store condition record).
Step 2:
Access Sequence: If existing access sequence meets the requirement, we need not create a new access sequence. Considering the requirement for new sequence, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Access Sequence (Access sequence is made up of Accesses (Tables) & the order of priority in which it is to be accessed. Here we assign the condition table to access sequence.
Step 3:
Condition Type: If existing condition type meets the requirement, we need not create a new condition type. Considering the requirement for new condition type, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Type. It is always recommended to copy an existing similar condition type & make the neccessary changes. Here we assign Access sequence to Condition type.
Step 4:
a. Pricing Procedure: It is recommended to copy a similar pricing procedure & make the neccesary changes in new pricing procedure. Pricing Procedure is a set of condition type & arranged in the sequence in which it has to perform the calculation. Considering the requirement for new Pricing Procedure, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Maintain Pricing Procedure.
b. Pricing Procedure: After maintaining the pricing procedure the next step will be determination of pricing procedure. Configuration for determining pricing procedure in SPRO is as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Determine Pricing Procedure.
5. Condition record: Condition record is a master data, which is required to be maintained by Core team / person responsible from the client. During new implementation, the condition records can be uploaded using tools like SCAT, LSMW, etc.
Normal Sales Order Cycle:-
Step 1: Sales Document Type
IMG > Sales and Distribution > Sales > Sales Documents >
Sales Document Header:
1. Sales Document Type:The sales document types represent the different business transactions, such as Inquiry, Quotation, Sales Order, etc. To create new sales order type, always copy as with reference to similar sales order. If possible use standard sales order.
2. Define Number Ranges For Sales Documents: Maintain number range with discussion with core team.
3. Assign Sales Area To Sales Document Types:
A. Combine sales organizations / Combine distribution channels / Combine divisions: Ensure to maintain these, else Sales Order creation will give error.
B. Assign sales order types permitted for sales areas: Assign only required Sales Order Types to required Sales Area. This will minimize selection of Sales Order Type as per sales area.
Sales Document Item:
1. Define Item Categories: If possible use Standard Item Category. Incase if required to create new, copy as from standard & maintain New.
2. Assign Item Categories: If possible, use standard. Formula for deriving item category: Sales Document Type + Item Category Group + Usage + Higher Level Item Category = Item Category
Schedule Line:
1. Define Schedule Line Categories: If possible use Standard Schedule Lines. Incase if required to create new, copy as from standard & maintain New.
2. Assign Schedule Line Categories: If possible, use standard. Formula for deriving Schedule Line: Item Category + MRP Type / No MRP Type.
Step 2:
IMG > Logistic Execution > Shipping > Deliveries >
1. Define Delivery Types: If possible use Standard Delivery Type. Incase if required to create new, copy as from standard & maintain New.
2. Define Item Categories for Deliveries: If possible use Standard Item Categories for Delivery Type. Incase if required to create new, copy as from standard & maintain New.
3. Define Number Ranges for Deliveries: Ensure to maintain number range.
Step 3:
IMG > Sales and Distribution > Billing >
1. Define Billing Types: If possible use Standard Billing Type. Incase if required to create new, copy as from standard & maintain New.
2. Define Number Range For Billing Documents: Ensure to maintain number range.
3. Maintain Copying Control For Billing Documents: Maintain relevant copy controls such as Sales Order to Billing, Deliver to Billing, etc.
he configuration differs from scenario to scenario & requirement of the client.
Interesting &important link to learn much more about configuration & business process is as under:
Link: http://help.sap.com/
Path: SAP Best Practices --> Baseline Packages --> Based on SAP ECC 5.00 --> Select Country: for eg, Localized for India --> Technical Information --> Building Blocks --> Select Country for eg, India --> List of Basic Configuration & scenarios will be listed.
Select the required basic configuration / scenario. These will consist of overview, configuration guide, business process, master data &so on.
====
Cash Sale & Rush Order
Cash Sales and Rush Orders
====
Contracts
General Contract Processing
http://help.sap.com/erp2005_ehp_02/helpdata/en/5e/69a1228f6211d2a9f60000e8a6f09e/frameset.htm
Renewing Contracts
http://help.sap.com/erp2005_ehp_02/helpdata/en/2c/275c9c456a11d189440000e829fbbd/frameset.htm
Subsequent Rental
http://help.sap.com/erp2005_ehp_02/helpdata/en/42/c820c5f8191377e10000000a1553f7/frameset.htm
Real Estate Contract
http://help.sap.com/erp2005_ehp_02/helpdata/en/8d/fb783b05efdb18e10000000a114084/frameset.htm
Value Contract
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/55fd7a545a11d1a7020000e829fd11/frameset.htm
Creating and Sending Complaint Notifications
http://help.sap.com/erp2005_ehp_02/helpdata/en/2a/df32f73d7a4bbd8d6e50b32e9227e8/frameset.htm
Use of Value Limits (for Unplanned Services)
http://help.sap.com/erp2005_ehp_02/helpdata/en/c3/72cd0755cd11d189660000e8323c4f/frameset.htm
====
Quantity Contract
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/55fd60545a11d1a7020000e829fd11/frameset.htm
http://help.sap.com/erp2005_ehp_02/helpdata/en/70/23c791419311d2ac100000e829fbfe/frameset.htm
Batch Determination in Quantity COntract
http://help.sap.com/erp2005_ehp_02/helpdata/en/25/283c804f7811d18a150000e816ae6e/frameset.htm
Customer Contracts
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/55fd53545a11d1a7020000e829fd11/frameset.htm
Purchase Contract
http://help.sap.com/erp2005_ehp_02/helpdata/en/70/23c6ce419311d2ac100000e829fbfe/frameset.htm
Contract Settlement & Billing
http://help.sap.com/erp2005_ehp_02/helpdata/en/ea/00efa6f94011d2968c006094b92c6a/frameset.htm
====
Service Contract
http://help.sap.com/saphelp_sm40/helpdata/en/8f/b4113a7e31e403e10000000a11402f/frameset.htm
Processing Service Contract
http://help.sap.com/saphelp_46c/helpdata/en/e6/4a8f849e0311d189b70000e829fbbd/content.htm
Service Order Processing
http://help.sap.com/saphelp_crm40/helpdata/en/81/78963ec975667fe10000000a114084/content.htm
Sub Contracting Cycle
(1) You have a material that can be procured externally, and you have maintained BOM with components. Any waste generated and received during subcontracting process can be maintained as component with negative quantity.
(2) You create a subcontracting PO (PO with Item Category L). You can also maintain Purchase Info Record for Subcontract category for material and subcontractor.
(3) You make a transfer posting to issue components for SC PO. Material is sent to subcontractor. As material remains under your ownership, system does not make any value entry. But quantity is shown as "Material Provided to Vendor"
(4) You receive finished material against SC-PO. You also specify components consumed in manufacturing of finished goods. Additionally, if you have negative components in BOM, now you'll also receive subcontracting by-products. There are three events, so three accounting entries are generated:
DR FG Stock/ SC By-Product Stock
CR Change in Stock (FG/ SC By-Product )
(for finished goods received)
DR Subcontracting Charges
CR GR/IR Clg
(for moneys payable to Subcontractor)
DR Consumption (Components)
CR Change in Stock (FG/ SC By-Product )
(material provided to Vendor is now charged to expense)
(5) You do the IV for SC Invoice, and the process is complete.
Process of Subcontract in MM
Sub-contract business process:
You want to buy material from the supplier (processed material/ assembled item) , but for some reason (quality of certain item / price ) you will give some component to vendor .
Vendor shall process the item / use the item provided & supply the final item.
SAP process:
1.Create the finished goods material code.
2.Maintain the BOM for the material.
3.Create PO with item category as "L" .
4.Issue material to vendor with movement type 541
5.Receive the material against the PO with movement type 101.
6.MIRO to account for vendor's invoice for the service charge& material used by him.
Can anybody tell me how a process has to be given to subcontracting?
Suppose, I have 3 operations 1)weaving 2)dyeing 3)cutting & packing
if no 2 process (i.e Dyeing) has to be given to subcontracting, what process should i follow ?
The following process to be followed for subcontracting.
1. Item code(material master) to be created at the stage of before dyeing.
2. Item code(material master) to be created after Dyeing as subcontracted item.(F30)
3. Bill of material to becreated for the material(2) calling for material(1)
4. Inforecord and source list to be created for material(2) with the corresponding vendor
5. PO to be released for material (2)
6.Along with PO the material(1) to be issued to vendor
7.On receipt of material when GR is made the stock with vendor will get updated.
How to Create a Subcontract Order?
To create a subcontract order, proceed as follows:
Enter the material you want to order and the item category for subcontracting (L) in the order item.
Press ENTER to display the screen for component processing.
Enter the components that the vendor requires to manufacture the product.
Please note:
You do not need to enter the date required for the components. This date is proposed by the system when you press ENTER.
It is calculated as follows:
Delivery date of the item - Planned delivery time
If you do not want the quantity of the components to be changed if the order quantity of the end product is altered, set the indicator Fixed quantity (column F).
You can determine whether the components are available on the date required by selecting Edit -> Availability check.
If you entered a bill of material as the material in the subcontract order, the components are created automatically.
If you want to determine the components in the bill of material at a later date (for example, if the bill of material is subsequently changed), choose Item -> Component -> New BOM explosion. The existing components are deleted and redetermined in the bill of material.
Save the purchase order.
When you print the purchase order, the components are printed per order item.
====
Scheduleing AGreements
Creating Schedule Agreements
http://help.sap.com/erp2005_ehp_02/helpdata/en/75/ee0f8155c811d189900000e8322d00/frameset.htm
Controling Scheduling Agrement
http://help.sap.com/erp2005_ehp_02/helpdata/en/93/7439ee546011d1a7020000e829fd11/frameset.htm
Example Data
http://help.sap.com/erp2005_ehp_02/helpdata/en/8a/815cc3b36211d188e70000e8216438/frameset.htm
Mass Maintenance of Scheduleing Agreements
http://help.sap.com/erp2005_ehp_02/helpdata/en/1a/8b4bbecdd74536acd4e970faaf6e2d/frameset.htm
Initial Data Transfer
http://help.sap.com/erp2005_ehp_02/helpdata/en/49/87c646f4a311d1955100a0c9306667/frameset.htm
Analysis & Copying of Scheduling Agreements
http://help.sap.com/erp2005_ehp_02/helpdata/en/45/f9a69036035f4be10000000a114a6b/frameset.htm
Processing Scheduling Agrements
http://help.sap.com/erp2005_ehp_02/helpdata/en/bd/1850f298a911d194fc00a0c9306667/frameset.htm
Scheduling Agreements for Suppliers
http://help.sap.com/erp2005_ehp_02/helpdata/en/93/743962546011d1a7020000e829fd11/frameset.htm
====
Credit Memo
Credit Memo
http://help.sap.com/erp2005_ehp_02/helpdata/en/a8/b99890452b11d189430000e829fbbd/frameset.htm
Creating Credit Memo / Debit Memo
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/561076545a11d1a7020000e829fd11/frameset.htm
Creating Credit Memo / Debit Memo Requests
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/55fed1545a11d1a7020000e829fd11/frameset.htm
Credit & Debit Memos
http://help.sap.com/erp2005_ehp_02/helpdata/en/a2/40418a496e11d3b3850008c719be0f/frameset.htm
Processing Credit Memo : Example
http://help.sap.com/erp2005_ehp_02/helpdata/en/4e/b3c399a1f711d194e700a0c9306794/frameset.htm
===
Debit Memo : http://help.sap.com/erp2005_ehp_02/helpdata/en/8d/a4b3880bc4c441905801d5025a5600/frameset.htm
====
Return process
You need to receipt the rejected goods through SD Module (VA01 - Sales Order type RE).
The steps are as follows :
1. Create a return request. (Using Sales Order in SD)
2. Create outbound delivery according to return request.
3. If the setting is correct in the outbound delivery screen SAP will automatically switch post goods issue button into post goods receipt. The setting is in sales order item category and delivery type.
4. In the standard system the movement type used is 651.
5. After post goods issues receipt is done using outbound delivery, the quantity is placed in blocked stock without value updating.
6. You will then decide if the return quantity are indeed bad stock or not.
7. Transfer Posting from block stock to unrestricted stock (mvt type 453), this will have accounting effect (Debit Inventory, Credit COGS)
8. Goods Issue to scrap account how to create new titles which can be used in creating the "address" view on the Vendor master.{T-Code: XK01}
In config go to Basis Components --> basis services --> Address Management --> Maintain title texts
Order type (RE)
Returns (RE) (VA01) Order will be placed as a return type order
 PGR (VL02N) post goods receipt
 Billing (VF01) --> Credit Memo is Raised
Accounting (VF02) --> Credit memo is passed to Accounting tables
===
Calcelling Invoice.
VF11 --> PGI (VL09N)
===
====
Reward if USeful
Thanx & regrads.
Naren..

Field "OutputType" when assigns sales document header to output procedure

Hi Experts,
When allocates the Output Determination Procedure to Sales doc header (IMG->SD->Basic Functions ->Output Control->Output Determination Using the Condition Technique->Maintain Output Determination for Sales Documents->Assign Output Determination Procedures)
There is a field called "Output type(with all the output type defined)" and i wonder the utility of this field here during assignement of a Output Determination Procedure to Sales document header.
Someone could tell me the use of this field here?
Thank you,
Best regards,
Louis.

Hi,
i m just giving u clue...i think that will answer ur query..
have u created Pricing procedure determination
sales areaDuPPCuPPPricing determination Pricing type
Now can u tell me what is significance of pricing type?
if u know then u answered ur thread query..
correct me if went wrong
tnanks
mk

Partner determination for sales doc header

Dear all
I assigned 2 SH to 1SP in customer master but in sales order system allowing manually to select any SH which is not assigned to SP.
waiting ur reply

Hi Lucky,
To map your requirement please use the following path:
IMG> Sales and Distribution> Basic Functions > Partner Determination> Set Up Partner Determination--> Select (Set Up Partner Determination for Sales Document Header). Here Select the Standard order & select Partner function in Procedure. Here against Ship-to-party Line you can see the ORIGINAL TABLE coloumn Here select "C" - Partner function from customer master (table KNVP).
By doing the above settings the system will allow only partners from Customer master records.
Hope this works for you.
REWARD if it helps you!!
Regards,
Ajinkya

Output determination for sales order via email notification

Dear All,
Can some one provide me a step by step configuration guide for Output determination via email notification.
I would appreciate for your prompt response.
Thanks
ANGKS

Hi there,
For getting output Email or any media you have to do output determination. output determination is also carried by Condition techniques.
Configuration path: (following are the steps)
1) SPRO-> IMG-> Basic Functions-> Output Control-> Output Determination-> Output Determination using Condition Technique- >Output Determination for Sales Documents .
2) Create Condition Table: select the field Sales Doc Type from field catalog & Save
3) Maintain Access Sequence: 4-digits code & description.
4) Assign condition table to access sequence. Select Accesses line item and Go To Fields. Fields will display the fields we have selected in the condition table i.e. sales doc type. Maintain Output Types:BA00: Order Confirmation Select BA00 & Copy & Rename. Give the same 4-digit code as given to access sequence. You Can Maintain: Languages of Output Partners (to whom you need to send output) Print Program- print specification Sap Script- layout Assign Output Types to Partner Functions: go to new entries & assign your output type to partner functions. Maintain Output Determination Procedure: V10000 (Standard Procedure)here you select communication medium Email.
Go to new entries and create your own 6-digit code with description. Select the procedure, go to Control Data. Here mention the output type i.e. condition type and leave requirement and manual only columns as blank. Determination Rule: link the 6-digit procedure code to doc types. Create Condition Records: VV11. Select document type and click on Communication. Mention partner function, medium, time. Output device: LP01, Spool request Name: SD_003, Suffix 2: order_confir & flag on print immediately. Once you press enter you will come across 2 key combinations: Sales organisation/ Customer Number: fill SO, Customer No, Partner Function Abbreviation, Partner to whom the output should be sent, time, medium, language. It contains: Sales Orgnisation, Customer, Partner Function (The abbreviated form of the name that identifies the Partner) (During output determination, the system determines the recipient of the output from the master record for the specified partner function. In this field, you can explicitly specify a recipient that will override the standard partner. There must also be a master record for the partner that is specified explicitly.), Medium, Time & Language.} Order Type: Document Type, Partner Function (abbreviation), Partner, Medium, Time & Language. Path For Output Determination For Sales Documents: Logistics -> Sales/distribution -> Master data -> Output -> Sales Document -> Create (t-code VV11) Path for Output Determination
I hope this will help you.....
Regards
Deepak

Unable to create a sales document

Hi frns,
while creating sales document (order) an error poping up saying No customer master record exists for Sold to Party.. Pls advise how to solve da above
regards,
kk

There is a possibility that a Customer Master record is not created, or if it is created, it may not be created in the required Sales Area. Please create Customer Master Data in XD01 & after that create Sales Order. It certainly shoule create Sales order. Also check your configuration for SD:
SD Configuration:
Enterprise Structure:
1. Maintaining Sales Organization
Sales Organization is an organizational unit responsible for the sale of certain products or services.
IMG -> Enterprise Structure -> Definition -> Sales and Distribution -> Define, copy, delete, check Sales organization
2. Assigning Sales Organization to Company Code
This assignment ensures all the sales made through this Sales Organization are accounted for in the assigned Company Code (Company Code is created by FI Consultant).
IMG -> Enterprise Structure -> Assignment -> Sales and Distribution -> Assign Sales Organziation to Company Code
3. Maintaining Distribution Channel
Distribution Channel is the way, in which Products or Services reach Customers.
IMG -> Enterprise Structure -> Definition -> Sales and Distribution -> Define, copy, delete, check distribution channel
4. Assigning Distribution Channel to Sales Organization
This assignment ensures, a Sales Organization can supply Materials to Customers through this Distribution Channel.
IMG -> Enterprise Structure -> Assignment -> Sales and Distribution > Assign distribution channel to sales organization
5. Maintaining Division
Division is a way of grouping materials, products, or services.
IMG -> Enterprise Structure -> Definition -> Logistics - General -> Define, copy, delete, check division
6. Assigning Division to Sales Organization
IMG -> Enterprise Structure -> Assignment -> Sales and Distribution -> Assign division to sales organization
7. Setting up Sales Area
All the sales are made from a particular sales Area. For creating a Sales Order Sales Area is compulsory.
IMG ->Enterprise Structure -> Assignment -> Sales and Distribution -> Set up sales area
8. Assigning Sales Organization- Distribution Channel- Plant
Plant is created ny MM Consultant.
IMG -> Enterprise Structure -> Assignment -> Sales and Distribution -> Assign sales organization - distribution channel - plant
9. Define Shipping Points
Shipping Point is the Organizational element, which is responsible for shipping the Materials to the Customers.
IMG -> Enterprise Structure -> Definition -> Logistics Execution -> Define, copy, delete, check shipping point
10 Assigning Shipping Point to Plant
This assignment ensures that goods from different Plant can be dispatched from different Shipping Points.
IMG -> Enterprise Structure -> Assignment -> Logistics Execution -> Assign shipping point to plant
Note: Ensure to do the undermentioned configuration also though it is not in Customizing node of Enterprise Structure.
11. Defining Common Distribution Channels for Master Data
Use
The purpose of this activity is to define distribution channels which have common master data..
Procedure
Access the activity using one of the following navigation options:
IMG Menu -> Sales and Distribution -> Master Data -> Define Common Distribution Channels
Transaction Code: VOR1
12. Defining Common Divisions for Master DataUse
The purpose of this activity is to define distribution channels which have common master data..
Procedure
Access the activity using one of the following navigation options:
IMG Menu -> Sales and Distribution -> Master Data -> Define Common Division
Transaction Code: VOR2
Pricing Procedure
In SD, Pricing Procedure is determined based on Sales Area (Sales Organization + Distribution Centre + Division) + Customer Pricing Procedure + Document Pricing Procedure. Sales Area is determined in Sales Order Header Level. Customer Pricing Procedure is determined from Customer Master. Document Pricing Procedure is determined from Sales Document Type / Billing Type (if configured). Once the pricing procedure is determined, Condition records are fetched. If appropriate condition records are found, the price is determined. If Mandatory pricing condition is missing, system will through an error message.
In SD, the steps to configure Pricing procedure are as under:
Step 1:
Condition table: If existing condition table meets the requirement, we need not create a new condition table. Considering the requirement for new condition table, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Table (select the required fields combination, which will store condition record).
Step 2:
Access Sequence: If existing access sequence meets the requirement, we need not create a new access sequence. Considering the requirement for new sequence, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Access Sequence (Access sequence is made up of Accesses (Tables) & the order of priority in which it is to be accessed. Here we assign the condition table to access sequence.
Step 3:
Condition Type: If existing condition type meets the requirement, we need not create a new condition type. Considering the requirement for new condition type, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Type. It is always recommended to copy an existing similar condition type & make the neccessary changes. Here we assign Access sequence to Condition type.
Step 4:
a. Pricing Procedure: It is recommended to copy a similar pricing procedure & make the neccesary changes in new pricing procedure. Pricing Procedure is a set of condition type & arranged in the sequence in which it has to perform the calculation. Considering the requirement for new Pricing Procedure, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Maintain Pricing Procedure.
b. Pricing Procedure: After maintaining the pricing procedure the next step will be determination of pricing procedure. Configuration for determining pricing procedure in SPRO is as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Determine Pricing Procedure.
5. Condition record: Condition record is a master data, which is required to be maintained by Core team / person responsible from the client. During new implementation, the condition records can be uploaded using tools like SCAT, LSMW, etc.
Normal Sales Order Cycle:-
Step 1: Sales Document Type
IMG > Sales and Distribution > Sales > Sales Documents >
Sales Document Header:
1. Sales Document Type:The sales document types represent the different business transactions, such as Inquiry, Quotation, Sales Order, etc. To create new sales order type, always copy as with reference to similar sales order. If possible use standard sales order.
2. Define Number Ranges For Sales Documents: Maintain number range with discussion with core team.
3. Assign Sales Area To Sales Document Types:
A. Combine sales organizations / Combine distribution channels / Combine divisions: Ensure to maintain these, else Sales Order creation will give error.
B. Assign sales order types permitted for sales areas: Assign only required Sales Order Types to required Sales Area. This will minimize selection of Sales Order Type as per sales area.
Sales Document Item:
1. Define Item Categories: If possible use Standard Item Category. Incase if required to create new, copy as from standard & maintain New.
2. Assign Item Categories: If possible, use standard. Formula for deriving item category: Sales Document Type + Item Category Group + Usage + Higher Level Item Category = Item Category
Schedule Line:
1. Define Schedule Line Categories: If possible use Standard Schedule Lines. Incase if required to create new, copy as from standard & maintain New.
2. Assign Schedule Line Categories: If possible, use standard. Formula for deriving Schedule Line: Item Category + MRP Type / No MRP Type.
Step 2:
IMG > Logistic Execution > Shipping > Deliveries >
1. Define Delivery Types: If possible use Standard Delivery Type. Incase if required to create new, copy as from standard & maintain New.
2. Define Item Categories for Deliveries: If possible use Standard Item Categories for Delivery Type. Incase if required to create new, copy as from standard & maintain New.
3. Define Number Ranges for Deliveries: Ensure to maintain number range.
Step 3:
IMG > Sales and Distribution > Billing >
1. Define Billing Types: If possible use Standard Billing Type. Incase if required to create new, copy as from standard & maintain New.
2. Define Number Range For Billing Documents: Ensure to maintain number range.
3. Maintain Copying Control For Billing Documents: Maintain relevant copy controls such as Sales Order to Billing, Deliver to Billing, etc.
The configuration differs from scenario to scenario & requirement of the client.
Regards,
Rajesh Banka
Reward point if useful.

Partners are grey out in sales document fd type

Hi folks,
When am creating my sales order with document type FD free of charge delivery
in the sales order sold to party and ship to party tabs are coming grayed out why is it so.
I have created partner functions with account group as 0005 which is prospective customer.
i have done partner determination for sales document header. any body have idea on that
please suggest me .
thanks In advance.

Hi,
Goto Header-->Partners.
Check whether the number is in editable mode or not.Even though every thing is greyed out that number will be editable.Am I right?
If so remove the last digit of the number and then re-enter the same digit.
After that you will receive a message as every thing is redermined.
Double click on the number.
Now you can edit the address etc. data that is present there.
Regards,
Krishna.

Tax determination in sales document

Similar Messages

Maybe you are looking for