Tax ID SD cannot be checked (there are several/no tax records)

hi gurus,
1.i have the following message in green in status bar,when i m maintaining my tax condition records in vk11
Tax ID SD cannot be checked (there are several/no tax records)
above sd is the tax code this message is appearing for all tax codes including india and u.s. and other countries as well
2.how the system picks the value from the tax calculation procedure for example:taxinn,
here we maintain the tax code foreg : v6
and in vk11 we maintain for eg: mwst condition type and it asks for tax code my question is that we have not maintained any value for tax inn and tax code if FI than what is the purpose for doing it,.
thanks
please get back on it
mohit

answered

Similar Messages

Tax ID 10 cannot be checked (there are several/no tax records)

Dear Friends,
While am saving the condition recored...thesytem triggere below message...does this create further problems?
Tax ID 10 cannot be checked (there are several/no tax records)
Thanks
Sasi

Dear Sai,
Yes I am creating condition records for the taxes....i am using two dummy tax codes for taxable aand non taxable rated and assigning the same to the condition records....i am getting the error...
Thanks
Sasi

Error:TAX ID A1 CAN'T BE CHECKED(THERE ARE SEVERAL /NO TAX RECORDS)

HI,
I AM FACING THIS ERROR WHIE MAKING CONDITION RECORDS FOR LOCAL SALES TAX CONDITION TYPE IN VK11.
I HAVE CROSS CHECKED MY RECORD THAT IF THEY ARE ALREADY MADE AND HAVE DELETED ALL THE CONDITION RECORDS AS ERROR WAS SAYING THERE ARE SEVERAL TAX RECORDS.
BUT STILL ERROR POPS UP DUE TO WHICH I AM NOT ABLE TO CHARGE MY CUSTOMER WITH THE LOCAL SALES TAX.
PLEASE REPLY

Hi
Pl. check the thread
[CONDITION RECORD]
and pl. serach the forum before posting any thread.
Thanks
Amitesh

Why do Apps on my iPhone show updates but when I check there are no updates?

Why do Apps on my iPhone show updates but when I check there are no updates?
I check my Apps on my MacBook and it says there is 1 update but when I check that there are none.
Then I sync my iPhone with my MacBook and my iPhone says there are 7 updates for my Apps.
This is very confusing. I wish someone could fix this and make it simple and accurate to use.

Sometimes the update notification comes on but updates themselves do not appear if the iOS is not appropriate for the update. For example, I have an original iPad, thus limited to iOS 5.1.1, but an app I use has an update that requires iOS 6.1.3. So I have a consistent update notification but cannot get the update. So, check your iOS and see if it is up to date.

Microsoft Excel cannot access the file "-". There are several possible reasons. Windows Server 2008 R2 with Microsoft Office 2010

I have a problem with starting the Excel Application under a particular user (service account).
I try to schedule this C# script through an application X (not Windows Task Scheduler. And this
application will always use a service account to run services on the server). If I run the C# script in
command prompt under the same user, it runs. Under the application X, which uses the exact same
user, to initiate the C# script, it fails to open the Excel application (not sufficient permission?).
This script calls application.Workbooks.Open(<ExcelFileName>,0,false,Type.missing....). At this line
of code, it gives the following error:
Microsoft Excel cannot access the file "...". There are several possible reasons:
-The file name or path does not exist.
-The file is being used by another program.
-The workbook you are trying to save has the same name as a currently open workbook.
I tried all the methods that I found online as follow:
Create directory "C:\Windows\SysWOW64\config\systemprofile\Desktop" (for 64 bit Windows) or "C:\Windows\System32\config\systemprofile\Desktop" (for 32 bit Windows).
Changed the DCOM config for the Microsoft Excel application to include this user for Local/Remote Launch and Access.
Enabled all macros in Excel application and set the Trust Center.
Add the user to have full control on all folders that contain the Excel file.
Under DCOM
config, Microsoft Excel Application, if I modify the Identity tab to check on "This User" and enter the username/password to let Excel always run under that user. Then the application runs perfectly. However, other users can't run the excel application
on their own with the following error: "Cannot use object linking and embedding". If I check "Use the launching user", then Excel can't be launched. No errors in the logs or events anywhere to check.
Yet, still the same error. I think it's permission but I am not sure where and what to do for this to work.
Now, normally, when I run this excel report, I can double-click on the file and it'd automatically run,
save the new parameters into the current file and generate a new excel file (with date attached to the
file name). That means there is a change (save) to the original file.
Environment: Windows Server 2008 R2 and running Microsoft Excel 2010.
I appreciate all your help!

I am wondering if this has anything to do with having the user log into Excel.
In point #5 above: Under DCOM config, Microsoft Excel Application, if I modify the Identity tab to check on "This User" and enter the username/password to let Excel always run under that user. Then the application runs perfectly. However, other
users can't run the excel application on their own with the following error: "Cannot use object linking and embedding". If I check "Use the launching user", then Excel can't be launched. No errors in the logs or events anywhere to check.
Because running with the launching user proposes an user to run the Excel application. However, I do not think there is any where that we can pass in the password for this user to Excel. However, this Excel has all the permissions to Excel application as
well as the folders that have the Excel files.
Please help!
Thank you!

How to change the default JRE when there are several version of JRE in Sys

How to change the default JRE when there are several version of JRE in System?
i have installed j2sdk1.5.0 then installed j2ee1.4,then installed Weblogic6.1 which use jdk1.3
Now the JRE is jdk1.3\bin
When run class that was compiled with jdk1.5,throw:
java.lang.UnsupportedClassVersionError
How can i change the jre to 1.5?

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

There are several login keychain items I'd like to get rid of. I've deleted them but they come back after several hours. How can I get rid of them for good

There are several login keychain items I'd like to get rid of. I've deleted them but they come back after several hours. How can I get rid of them for good.

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences ▹ First Aid
If the box marked
          Keep login keychain unlocked
is not checked, check it.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

HT204409 I am trying to log onto my wireless connection but it keeps telling me I'm unable to locate any wireless network. I know there are several networks nearby. Is this a problem with my phone or my router?

I am trying to log onto my wireless connection but it keeps telling me I'm unable to locate any wireless network. I know there are several networks nearby. Is this a problem with my phone or my router?

I found a solution that has worked on both iPhone 4's I have that have had the same issues, and also including not being able to download updates in the App store.
Go to Settings > WiFi and turn it OFF.
Next go to General > Cellular > Cellular Data and turn it OFF
Next go back to Settings > WiFi and turn it ON, (wait a few seconds for it to sync with your network)
Finally go back to General > Cellular > Cellular Data and turn it ON.
I had the same issues on both my wife's phone, and my own, and it fixed it immediately without changing any proxy settings or reboots, (which I did try on my phone and did not work, but did not try on my wife's phone)
Hope this helps!

I am sending a single-page poster in Illustrator to a commercial printer. There are several placed graphics and I want to choose the correct file-type to keep my Illustrator file nice and small.

I am sending a single-page poster in Illustrator to a commercial printer. There are several placed graphics and I want to choose the correct file-type to keep my Illustrator file nice and small.

Printers like PDFs, but you should consult with the print vendor before you save the file in any particular format. Each vendor is different and have an established workflow. They may not accept JPGs. If the poster prints offset, you will need to supply the appropriate resolution per their request or what they require. If the poster is large format or grand format, then they will or should know what resolution is appropriate. However, large format inkjet only requires 144-150ppi at 100% final size. Try to get in the habit of consulting with the print vendor early on so you end up supplying what is needed.

Has anyone had this issue. I created my song from itunes to garage band, took my iphotos to create a slide show and when I burned to idvd there are several pauses during playback?

Has anyone had this issue. I created my song from itunes to garage band, took my iphotos to create a slide show and when I burned to idvd there are several pauses during playback?

Hi
SlideShow in iDVD has a 99 photo limit - more than this and all sorts of error occures.
One can have more than one SlideShow on a DVD = X times 99 photos.
or assemble SlideShows in a movie editor (no limit at least not under 650 photos)
(only limit is Time in iDVD (movie time + MENU time --- 60 min or 120 min on SL-DVD and about twice on DL.-DVD )
I use
• iMovie up to HD6 - or -
• FinalCut any version
As they will give a better quality than iMovie'08 or 09 or 11 can do.
Yours Bengt W

Hi. I upgraded our Ipad2 and we have noticed there are several calendar items missing which were there prior to the upgrade. Can I restore historic calendars from itunes/pc or icloud?

Hi
I upgraded our Ipad2 and we have noticed there are several calendar items missing which were there prior to the upgrade. Can I restore historic calendars from itunes/pc or icloud?

Please please help me, if you know how.

I had to change IE's User Agent. However, there are several problems.

I had to change IE's User Agent. However, there are several problems.
I wrote the following C# code :
RegistryKey reg = Registry.Currentuser.OpenSubKey(@"Software\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent", true);
reg.SetValue(null, "Mozilla/5.0 (iPhone; CPU iPhone OS 5_0 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9A334 Safari/7534.48.3");
So, I have succeeded to change the UserAgent.
( ↑ http://esolution.se/whatsmyinfo)
But, Browser / OS / Is Mobile Device is not changed.
What should I do to be as follow(Browser User Agent Switcher)?
Thanks for reading. Sorry immature to English.

This is more related to ASP.NET and web development as it involves browser agent strings. Please post this question in the ASP.NET forums (http://forums.asp.net ).

HT4914 How can I update the iTunes stores songs... There are several songs of Mac Millers that are wrong with Itunes match!

There are several songs that are wrong because they have the same title

Hi Bill of NJ,
If you are only seeing part of your content on your new computer with Home Sharing (for example, new purchases automatically downloaded with Automatic Transfer), you may need to manually transfer the remaining files via Home Sharing. You may find the following article helpful:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Regards,
- Brenden

HT3702 my account has been hacked.. what should I do.. there are several charges that are not mine!!

my account has been hacked.. what should i do.. there are several charges that i did not do..

If you haven't already done so then change your account's password e.g. via the Store > View Account menu option on your computer's iTunes or http://appleid.apple.com
You can also contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Just bought an iMac. I want to be able to "remote in" to work. I've been told to download software from Microsoft site but can see there are several versions available. Can anybody advise which one I need. Thanks

Just bought an iMac. I want to be able to "remote in" to work. I've been told to download software from Microsoft site but can see there are several versions available. Can anybody advise which one I need. Thanks

You mean Microsoft Remote Desktop Connection Client for Mac

Tax ID SD cannot be checked (there are several/no tax records)

Similar Messages

Maybe you are looking for