Tax is adding to My Base Price in Sales Order

Hi,
In my sales order Tax is added to my Base price,but it should not add.
Suppose My item MRP is 20 Rs.
After some Margin percentage my item value is 15 Rs.
Now My CST Tax is 2%,it should be deducted from 15 RS then only i will get my Basic value.But here 2% is added to 15 Rs.How to configure this?
Thanks

Hi Anwer,
Do you have reversal pricing?
Means you are determining, Price based on MRP where you are deducting Profit Margin from MRP then Reducing Tax and then get the Base Price.
After that you are again adding the Tax on Base Price. Am I correct?
You can use simple Calculation Type (Base Price/ (1+ CST%)) this will provide you the value of Base Price and add the same again.
Please consider, there is a difference between meaning of deducting CST value from Base Price and Deriving Base Price by deducting CST %.
Regards,
MJ.

Similar Messages

Cannot edit header price when sales order copied from sales order

I have a requirement to copy a sales order with Freight manually added in Header Pricing to another sales order. The Header Price for Freight is grayed out on the target document and the requirement is to have that price field open to edit. I've tried several copy control settings to no avail. Will a copy control routine need to be written in order to open the freight price field for edit in the target document?
I very much appreciate your assistance.
NP

Hi Nancy,
Validate the Pricing Type in the copy control at item category level, by default Pricing type is equal to A (Copy price components and redetermine scale), which can be adjusted to adjust your requirement in copying from another sales order.
Make sure your setting in the condition type under "Changes which can be made" are supporting the necessary changes a user needs to make.
Regards,
Naveen Aggarwal

How to mark up the price for sales order entry?

Hi Gurus,
How to Mark up the price for sales order entry?
Example: Item Price: $10, Adding 20% Margin
Selliing price of the item is $12
we are giving many typs discounts like festival Discount, customerwise, Order value wise etc..
After giving above discounts, if discount falls below $10 system should not allow to book the order, Trigger should go to respective person or sales person saying that item price falling below cost, system should not allow to book the sales order.
How to configure this scenarios in Order management Module, appreciate your inputs, advise.
Regards
AK

Thanks for your response,
can you please guide me step to achieve this requirement.
Regards
AK

Material cost / Price on sales order ?

Do we get the material Cost / Price (Vendor Material price ) on sales Order ?
I means can we see the material Cost and Material Sales price in Sales order ?
Hope my question clear .

Hi -
Please follow above answer and ignore my reply.
Thanks!
Anesh B
Edited by: Anesh B on Oct 7, 2009 4:28 PM

BASIC PRICE OF SALE ORDER

Hi All,
I have a requirement , i have a report which shows all pending sale order,
i want to display basic price of sale ordrer ,from which table would i get the basic price against sale order.
Thanks & Regards
Lalith

Hi,
Pick up knumv fron VBAK. Then access KONV with KNUMV = vbak-kunmv and kschl = 'PR00' ( This could be different, since this is SAP standard ).
I hope this helps,
Regards
Raju Chitale

How to update the condition price in sales order while creating the invoice

Hi,
How to update the condition price in the sales order to carry out the new price while creating the invoice?
While creating the invoice it should update the condition price in sales order.
Thanks,
Balaram

No, pricing is not there in delivery.
I found an exit for VF01transaction where we can update the price in order.
Can you please tell me how to update the price if I have the order, material numbers and conditions number?
Thanks,
Balaram

Change price in Sales Order created with reference with Quote

Hi Experts,
Need to change price (eg..1000USD to 1100USD) in sales order (va02). Here Sales Order is created (va01)with reference with Quote(va21) where price in maintained (as 1000USD). so price in Sales Order is copied from Quote. Now, If I want to do the change in Sales Order (from 1000USD to 1100USD) kindly suggest me what are all the possible ways. Can I do the changes within the existing documents rather than creating new docs. due to the change.
Note: User is creating new Quote with 1100USD and creating subsequent new Sales Order with new Quote.
Thanks
Viswanathan

Hi,
In va02 you double-click on the material that has been entered, then in the new screen goto the condition tab, here u will find the $1000 that you have entered, and then change it to $1100.
Swapnil

Capture the purchase price during sales order creation

Hi,
User wanted to capture the item purchase price when a sales order is raised.
Currently, the sales order capture the VPRS whcih is coming from the material valuation (MAP) price.
Is there a standard condition type that will captured the purchase price in the PIR record or the PP condition?
Thanks

Hi
As far as i know it is not possible to fetch the purchase price in sales order.
May be you can define an another condition type asa statistical and maintain the condition records for that. But it will be a tedious job for maintaining all the things.
regards
Prashanth

Need to pull INITIAL(vbap)net price of Sales Order, after changing viaVA02

Hi Experts,
Mine is differetnt requirement..........
I created a my_Sales_order_12345678 with 2 items, as follows,(all following values/entries r for my_Sales_order_12345678)
line item_10---->net_value_netpr = $100
line item_20---->net_value_netpr = $200
Then the VBAP entries as r as follows,
POSNR -
>NETPR
10----
> $100
20----
> $200
I changed first time as via VA02 tx, as
line item_10---->net_value_netpr = $300
line item_20---->net_value_netpr = $400
Then the VBAP entries as r as follows,
POSNR -
>NETPR
10----
> $300
20----
> $400
I changed second time as via VA02 tx, as
line item_10---->net_value_netpr = $500
line item_20---->net_value_netpr = $600
Then the VBAP entries as r as follows,
POSNR -
>NETPR
10----
> $500
20----
> $600
My requirement: for some reason, I need the initial values, I mean
the VBAP entries of,
POSNR -
>NETPR
10----
> $100
20----
> $200
I tried with CDHDR & CDPOS tbls, but no use? So, from Where Can I get/pull them??
thanq
Edited by: Srinivas on Jan 24, 2008 12:22 AM

hi sirnivas..
Thanq you for the points..these are the first i ever recieved..
if you are working on peice of code which can get the price history do me a favour if you have finished the code just explain it to me who did u do that...
i have been working on an object from last two weeks to get the latest price...
the thing is even though the price for condition items has been changed it wont get updated in the Sales orders unless new pricing fot the document is done...
so i have to get all the sales orders who condition items price has been changed and display them in an ALV...so if you can get the exact old values...for the conditions i guess the opposite also can be done.....
Here i have suggestion for you...in condition items there is a process called SCHEMA ( pricing Schema) which you can see using Condition Analysis button at the bottom of the condition item window...
you can see all the price changes to the condition when you parse the tree structure of the procedure..EXAMPLE :- R0000 etc...
so some Sales orders if the Schema has been changed all the existing condition are replaced by New ones from the changed Schema...so i guess that would play an important role in deciding the Price of Sales order...
I know this is bit long but .....if you did finsish your program do let me know how you did it...
Thankyou very much and good luck.

Update price on sales order

Hi All,
we have this requirement as below:
Update price master data every half year, once the price is updated, all price on the sales order should be refreshed. Does SAP have standard function to update price on sales order? We don't want to refresh sales order one by one, after the price master is updated.
Thank you!

Hi,
You can try with t-code MASS but you'll not have an option of Pricing Update over there, but I can suggest you one wayout in this situation as below:
- Go to MASS
- Select object type BUS2032
- Select Sales Order Header data
- Click on fields
- You will see Pricing Date field
- Select and execute
Logic behind this option is as below
- your old sales orders would have old pricing date on which old pricing records were existing.
- once you prices are updated half yearly and if you change the pricing date system will again look for the condition records and then it will update the prices as per new pricing date
I have not done this actually, but this may work because logic seems to be right.
Hrishi

Hide Unit price from sales order for sales user without change authorization of document setting

Hi all expert
Hide Unit price from sales user without change authorization of document setting.
I have also refer this note
SAP B1 2005 Purchas Order,Good Reciept PO'S, and Unit Price Block
but sill I had not getting my proper solution.
I want to restrict sales person to see & access unit price. Here I know option of block authorization of document setting but its not good option because , In future ,if sales user wants to changes forms setting in future so Its become problematic for user. so I want do this without restrict user for form setting & only hide unit price table from him/her. also He/her able to access form setting with out unit price.
Please reply
Amol Nikam

Hi Experts,
Please Tell me Is there any option "Hide Unit price from sales order for sales user without change authorization of document setting"
Regards/Thanks
Amol

WebUI : Entry Price in Sales Order - not user friendly

Dear all,
Have any of you use Sales Order entry on SAP CRM2007 WebUI ?
I would like to hear comment from you regarding on how you enter the item price in Sales Order module.
This is what I found, to enter single price for a product you need to go through at least 3 steps after you
open Sales Order Document.
1. Select/Enter the Product and Click on Edit for that particular product
2. System will open next page showing more detail info of that Product
here you need to click on Price section again
3. Finally the system will show the page where you can enter the price
For each of page transition the system may takes 3-7 seconds, so up to around 9-20 seconds user needs
to spend just to entry a single price in one Item.
Even worst, if there is more that one product, user have to click on back button couple times to go back
to main document to click another product to edit. Means another waste of time!
I like to hear comment from you and if you have better idea on how to simplify this, it will be great!
Some development effort on WebUI components need to be done I think, appreciate if you can lead
to more simple way to accommodate this.
Thanks,
Gun.

Hi Michael,
Is the configuration of easy condition entry only for IC WebClient?
Because that is what I found in SPRO for Set Up Easy Condition Enty documentation (at Condition 1
field).
Now, my initial question is refer to entry price at Sales Order transaction in Web UI (not IC WebClient).
I tried to setup Easy Condition Entry, put my pricing procedure and maintain condition 1.
and set visible for field Condition 1 Value and Rate in the items table.
I can see the fields, but I can only see fields can be modified/enter if I have maintained manually the price
at normal way (click Edit on item line, then click Edit again on Price, then click again to maintain the
price).
I applied Notes 1292789, but this even worst, Condition 1, Value 1, Rate 1 cannot be edited.
Is there any missing prerequisite setting here?
Have you tried this works on Sales Order entry on Web UI (not IC Webclient) ?
Appreciate your further information,
Gun.

Price in sales order

Hi gurus
I have a requirement
My user is trading glass and he got some around 20 process like polishing, smoothing, etc.,
now he charges extra prices on top of the base price of the glass with permission from customer as extra work
now what is the best method to do that, in sales order
condition type, charcteristics with values in varint config, or services or any other method
Thanks in advance
Rajesh

Hi
there is many way to achieve it you can create condtion like freight or you can create your condition and change the condition class of condtions detail screen by changing the condition class "E" Extra Pay
Hope it will solve the probe if then (Points)
Regards
Shambhu Sarkar

Pricing Routine - unable to enter new net price in sales order

Hi all,
I have a routine 993 in sales order which is in Column 'Bas Type' in pricing procedure . The routine has statement like this that calculate the unit price:
If xkomv-kbetr is initial.
xkomv-kbetr = komp-netwr / kmeng
Endif.
This calculate the net price which appear in the column 'Amount/Net Price. In the order, the user can change the net price in column 'amount'. However, if i remove the line "If xkomv-kbetr is initial", the user can change the amount, but the amount value will stay as the original amount. I don;t understand why this happen. I have been debugging saplv61A (FM Pricing) but unable to get the flow. Can anyone pls provide guidance ?
Thanks
Joyce

Hi Joyce,
I'm just wondering how you solved this issue - would it be possible to post a solution please?
I have a similar issue (KBETR field is overwritten, after I change it in my VOFM routine)
I posted my question here:
VOFM (Pricing Condition) FREIGHT - unable to edit Amount value (KOMV-KBETR)
but haven't received any replies!
Would appreciated any help you can offer.
Thanks.

Net price in sales order

Hi,
The Net price which displays in my sales order conditions on top is wrong . Where is the calculation done for this in pricing procedure.Kindly let me know how to calculate the net price.

Hello
You control this in your pricing through Condition formula for Alternative calculation type (on of the 16 fields in Pricing).
For this if you refer Std pricng procedure RVAA01.
The net price is net price & taxes in sales order b'coz of [alternative calculation type as 4|https://docs.google.com/leaf?id=0B-5wCmYJ-6dlOTc3OTk1MjctZmIzOC00NmExLTk0N2MtNTcyMzBiYzFjOTc4&sort=name&layout=list&num=50] (check the link).
So if you want only net price to be there then use alternative calculation type as 2.
I hope this clarifies your requirement.
Thanks & Regards
JP

Tax is adding to My Base Price in Sales Order

Similar Messages

Maybe you are looking for