Tax line items not accumulating together in Miro

Hi
I am creating PO with more than one material Ex. for 5 different material. when i do MIRO , i am getting five Material and tax lines each seperately . It is not auumulating together. I need to add all together in one line item in MIRO for the posting. Also this issue happens for the newly customized Tax code only.
Ex.Vendor 780 CR*
      GRIR 150
     GRIR 150
     GRIR  150
     GRIR 150
     GRIR 150
      Tax-1  6.00
      TAx-2  6.00
      Tax -3 6.00
      Tax - 4 6.00
      Tax-5  6.00
Please Advice.
Thanks in Advance,
Jay.

Hi,
I think this is happening due to GR based IV.
Check with new PO where GR based IV is not active and then try MIRO.
Regards,
Sayujya

Similar Messages

  • Service tax line item not coming at the time of Cash receipts.

    Hi Gurus
    I have an issue, when i received payment from customer than no line is generated for service tax reversal which i have captured at the time of billing, but it is happining through T code F-28.
    any one have some idea of it, please share with me.
    Regards
    Shiv

    From which T code you are posting customer receipt???

  • Tax Line item

    Hi Gurus,
    I have been trying to create a Vendor Invoice (FB60) & in the line item I have assigned a Input Tax Code. However, the tax line item that should have been created automatically, is not getting generated.
    Once I find out the Tax Account for that Tax Code & manually enter the 'tax line item' & try to simulate, I get a message that "Enter the Tax Base Amounts for Account _____ in company code _____.
    I am at a loss as to,
    Firstly, why is the Tax Line item not getting created automatically?
    Secondly, when I manually enter the Tax Line Item, what does the error I am getting mean & how do I deal with it?
    Gurus, please help me.
    Thanks in advance.
    Regards,
    Debojit Dey

    Hi Debojit,
    Pl. check this config step. Check whether you have selected vaues in the field <b>Posting Indicatior</b> for the Account Key you have created for the tax type.
    The vaues are as under:
    Pstng ind. Short text                                                                               
    1              No posting required                         
    2              Separate line item                          
    3              Distribute to relevant expense/revenue items
    Path: <b>Financial Accounting> Tax on Sales/Purchases> Basic Settings> Check and Change Settings for Tax Processing</b>-   Select you account key and enter the vales in the field <b>Posting Indicatior</b>. 
    Hope this will solve your issue.
    Regards,
    Vijay.

  • Substitution for MIRO Business Area for tax line items

    Hi All,
    Our business requirement is updation of BA in tax line items during MIRO transaction. To fulfill this requirement i have written a substitution with user exit. Business user enters BA in bktxt . In user exit iam passing bktxt field to bseg-gsber. But BA is not updating in tax line items. Here iam giving the code which i have written in my user exit. Pls guide me what to do aprt from this.
      IF bkpf-bktxt IS NOT INITIAL.
        t_gsber = bkpf-bktxt.
      ENDIF.
      IF bseg-hkont EQ '0000098511' OR bseg-hkont EQ '0000098521' OR bseg-hkont EQ '0000098583'.
        cobl-gsber = t_gsber.
      ENDIF.
      IF bseg-hkont EQ '0000098511' OR bseg-hkont EQ '0000098521' OR bseg-hkont EQ '0000098583'.
        bseg-gsber = t_gsber.
      ENDIF.

    update like below:-
    UPDATE dbtab FROM TABLE itab. or
    UPDATE (dbtabname) FROM TABLE itab.

  • Tax line items in MIRO

    Dear Friends
    When we are doing MIRO, number of tax line items are created in a document for each material line item. How to get total tax in one tine item.
    Thanks & Regards

    Hi
    I would not recommend to use work-around if you do this there will so many scenarios will come into picture with each unique tax code. I think it is advisable to stick with SAP standard but still you want to try some work around then I following may or may not helpful
    LMR1M002 Account grouping for GR/IR account determination
    BAdI for saving an invoice document (INVOICE_UPDATE)
    Thanks,
    Jagdeep

  • Withholding tax line items are not post

    Hi,
    I was configured all the steps for extended withholding tax up to Assign withholding tax to vendor master data
    and the i am used to post an vendor invoice
    given all required feild and press enrer and display the withhoding tax codes screen here also press enter button ....  i entered all required field and go to simulation this posting i am getting only 2 line items
    like for eg: --- Inventory Debit ,   Vendor Credit  only
    here my problem is i am not getting the all with holding tax line items
    please hepl
    Sree

    Dear Sree,
    if You defined the WT type at the payment time, the WT line items will be created at the payment time and not during the invoice posting.
    Please check.
    Mauri

  • Miro line item not generated

    Dear All,
    I have facing one issue at the time posting in MIRO.
    I post one of migo doc in date 03/01/2010 , the entry is:( with same material )
    Post key   description  amt                               curr.( USD)
    89              Stk.RM -IMP                                     32100.00
    96              PL.VND.RM.IMP GR/IR                     32100.00
    40              Purchase RM-IMP                            32100.00
    50              Purchase offset.                             32100.00
    And Miro Posting on date 23/03/2010
    Post key   description  amt                               curr.( USD)
    31           xyz Vendor                                    32100.00
    86           PL.VND.RM.IMP GR/IR                    32100.oo
    89           Stk.RM -IMP                                    -
    40           Purchase RM-IMP                          -
    50           Purchase offset.                           -
    But when I post for another po in migo on date 03/01/2010
    Post key   description  amt                               curr.( USD)
    89              Stk.RM -IMP                                     76800.00
    96              PL.VND.RM.IMP GR/IR                     76800.00
    40              Purchase RM-IMP                            76800.00
    50              Purchase offset.                             76800.00
    and miro posting on date 19/02/2010
    Post key   description  amt                               curr.( USD)
    32            yz Vendor                                       76800.00
    86           PL.VND.RM.IMP GR/IR                      76800.00
    89           Stk.RM -IMP                                      Line item not generated
    40           Purchase RM-IMP                             Line item not generated
    50           Purchase offset.                              Line item not generated
    Can any one tell why line item not generated for miro posting .
    Regards
    Milind

    Hi,
    The extra line items will be generated when there are any exchange rate diffrences are there then only shows.
    Other wise it wont show those extra line items
    Please check group currency , global currency etc. for  your extra line items

  • Tax Line items are not showing seperately as per exp in FB60

    Hi,
    In FB60, I have booked the two expenses with tax code separately.  While simulating the entry the tax lines are not showing separately as per expenses.  For example:
    Suppose my tax code = AB which is equal to 10% maintained in FTXP.
    At present entry is coming as follows through FB60 is:
    Debit     Postage expenses     500 tax code AB
    Debit     Stationery expenses     400 tax code AB
    Debit     Tax               100
    Credit     Vendor               1000
    But we need the entry is follows
    Debit     Postage expenses     500 tax code AB
    Debit     Stationery expenses     400 tax code AB
    Debit     Tax               50
    Debit       Tax               40
    Credit     Vendor               1000
    But I change the tax code for second line AB to XY then calculation of tax entries shows separately according to expenses.
    Please let me know where did I do the mistake in configu2026u2026..
    Regards,
    Babjee

    Hi!
    Normally, all amounts being posted to the same GL Account and determined from the same tax code as automatically derived, will generate one common auto-generated line item. This is because tax reporting is usually based on tax code (external/tax reporting) and or GL account (internal/financial reporting).
    In your first case since the tax code used for both line is the tax code was the same, it would be posting to the same GL Account - hence a common line item got auto-generated.
    Check the Account Key and Assigned GL Accounts in T.Code FTXP. Additionally, check the Condition Type set-up (identified from FTXP) in T.Code SPRO / from menu IMG node Check Calculation Procedure.
    Regards,
    Ruchi

  • Document should not splitt to tax line items

    Hi,
    Document should not splitt for tax line items,currently it is happining how contol this.
    Thanks and Reg

    Hi,
    Then in the document splitting configuration, you can remove the base item category for this TAx Item Category.
    Regards,
    SDNer

  • Business area not defaulted for tax line item

    Hello Friends,
    I am posting Customer invoice, when I simulate the invoice that time Output tax is automatically calculating the tax. My problem is, in the Output tax line item business area is required field which is appearing in display mode.
    T code - OBXM. Here we will configure this and at the month end we will run the following transactions.
    F.5D, F.5E.
    I want to know step by step cinformation for this. If you have any documentation send it to [email protected]
    Rams.N
    Points will be assigned for the right answer

    hi,
    If you are using business area method then you want to create all sales tax GL with business area optional. And You create one GL like Tax clearing account(business area optional)and assign the same in OBXM against all the sales tax GLs.
    Then you want to run F.5d and F.5e on everymonth.
    govind.

  • Substitution of Business Area for Tax Line Items for Invoices posted in MM

    Hi
    We have one Business Area for every company code. A substitution rule has been created to populate Business Area in Tax Line Items, while booking vendor invoice. The substitution rule has been defined as
    Prerequite
    Company Code = 1234 and GL = 1323232
    Substitution
    Business Area = 6668
    The system is working fine, when the Vendor Invoice is posted through FI. However, when the vendor invoice is generated through MIRO or MIR7, the Business Area is not substituted.
    In Table VWTYGB01, we have maintained BSEG-GSBER as a field allowed for substitution with Boolean Class 09.
    We have created the susbstitution rule for Text and Assignment also and the rules are working fine for all document posted through FI and MM
    Regards
    Sanil
    Sanil K Bhandari

    Hi
    Business Area is a sensitive field, agreed. However, the substitution rule is working fine for FI posted documents and the issue is in MM generated documents.
    Regards
    Sanil Bhandari

  • Tax line items when travel expenses are posted to intercompany

    Hello Experts,
    We are posting a expense report  to a different cost center other than the Master cost center(IT0001). In this case system understanding as intercompany transaction and posting the travel expenses to different cost center and different company code. But the problem is when there is a tax calcualted, this tax is initially getting posted to original master cost center and again transfering the taxes to the intercompany cost center. this is creating an additional FI documents and also additional tax line items which is becoming very difficult for reconcilation.
    can any one suggest me where could be the correction required in order to post the taxes to intercompany cost center in the first instance itself.
    Thanks&Regards
    Srinivas

    Hi Srinivas,
    Profit center was not picking for tax line item when we were doing multiple cost center in a TRIP. So we have activated "not deductible" in VST and it got worked.
    Later when we got a Cross company employee vendor posting, tax line items are posting in both company codes.
    So we have deactivated "not deductible" in VST and activated "set expense company code" in table T706K (to allow cross company code postings in TM)
    And defined a new solution in New GL config for the first prblem.
    We have not changed anything in "posting indicator" in OBCN, it was 2 (Separate line item) only. You should not change this.
    All postings went fine.
    Regards
    SM

  • Business Area postings in Tax line items

    Hi Experts,
    As we know that Business Area is not updated in the tax line items, In one our company code we have done BA adjustment through F.5D and F.5E in 2007, after that there are thousands of line items in the system without business areas, now my client wants a tallied business area trial balance from 2007 onwards or aleast to ensure that the tax line items should get business area assignments from hereafter,  and also recently we have created one more company code, Please help how do I ensure that all the tax line items and items with blank business areas get the business area postings. Is there any user exit or any work around available for this... At present we have only one GL for Inter business area clearing for all types of accounts (reconciliation, tax accounts) in OBXM.
    Please help...
    Regards,
    Khan

    Hello,
    Are NewGL and document splitting active in your system? If yes, you should solve this problem with using splitting function.
    Otherwise, you can use business transaction event 00001120.
    I explained step by step how can you activate BTE 00001120. I give you message below.
    Re: FBCJ - Cash Journal Transaction
    In this exit, you must update t_bsegsub-gsber field which t_bseg-buzid = 'T' for tax item.
    But you can not split tax line items in this exit. For example in invoice you have 2 or more business area, but tax line item doesn't create for each buiness area (If you don't use document splitting functon). So in this exit you can only assign a business area to tax line item which is automatically generate while posting FI document.
    Regards,
    Burak

  • Get Withholding Tax Line Item Using FM

    Hi all,
    Is the any FM that allows me to get withholding tax line item (in table WITH_ITEM) based on the line item in BSEG? What I want from the result is that it will be able to tell me which line item in WITH_ITEM belongs to which line item in BSEG.
    Thanks for helping out.
    Regards,
    Goh Tiam Tjai

    Hello,
    I've found a way to do it, and considering that I could not find the answer in SCN I'll post it.
    I've created a report to show the calculated WHT which would be posted only at the payment moment. Also, in Brazil we work with extended WHT (and not the classic one).
    You will need an ABAP.
    Create a Z function module as copy of ZFI_WT_FB05_CALCULATE_WT.
    This FM has only input parameters, therefore it does not provide you with the calculated WHT as an output (as standard). Knowing this, it is necessary to change it (the FM) by summing all T_WITH_ITEM-WT_QBSHH per accounting document (this table is present in the standard FM).
    You need to provide the logic in order to obtain the parameters, The field which need to be filled are:
    I_AKTYP              =             "H”
    I_DYNCL              =             "Z”
    Table I_POSTAB
    Pick the data below from BKPF/BSEG of the accounting document which needs WHT to be calculated:
    BELNR 
    BUKRS
    GJAHR
    BUZEI
    WAERS
    BUDAT
    BLDAT
    BSCHL
    KOART
    SHKZG
    DMBTR
    WRBTR
    KONKO
    XAKTP = "X"
    XAKTS = "X"
    Table  I_BKPF
    BUKRS
    GJAHR     = year of the system date
    BLART     = KZ
    BLDAT     = system date
    BUDAT     = system date
    MONAT     = period of the system date
    TCODE     = FBZ2
    WAERS
    Then after changing the FM to have T_WITH_ITEM-WT_QBSHH as output, simulate it by inserting the values of the accounting document which has WHT, and check the result, if it is the same as calculated by F-53 or F110.

  • WH  tax line items cleared along with Other line items Message no:8I701

    hI guru,
    When i run J1INCHLN  System givem the error is : Withholding tax line items cleared along with other line items, message no:8I701
    Pleas any one give solution ..
    I also cheked as respective g/l for tds IN FBL3N . All line items are opend.
    Also cheked all selection parameter in J1INCHLN  and FBL3N .is same .
    Why the sys behaviour like this .
    Thanks is andvance
    Milind

    HI,
    he error is occuring in this part of the
    unction Module J_1IEWT_CHALLAN_UPDATE
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    LOOP AT p_t_ausz1.
    Select the cleared line item from bseg table.
       SELECT SINGLE * FROM bseg INTO  p_bseg_tab
                WHERE bukrs = p_t_ausz1-bukrs
                AND   belnr = p_t_ausz1-belnr
                AND   gjahr = p_t_ausz1-gjahr
                AND   buzei = p_t_ausz1-buzei
                AND   ktosl = 'WIT'
                AND   qsskz NE space .
       IF sy-subrc <> 0.
    This is not an ewt clearing transaction relevant for challan update.
         p_no_with_clear = 'X'.
         EXIT.
       ELSE.
         APPEND p_bseg_tab.
       ENDIF.
    ENDLOOP.
    Even if one line item chosen is not of withholding tax entry, system
    should exit by error message.
    DESCRIBE TABLE p_bseg_tab LINES  p_bseg_lines.
    DESCRIBE TABLE p_t_ausz1  LINES  p_with_lines.
       IF p_bseg_lines > 0.
    At least one entry is found in bseg table for challan update.    IF p_with_lines NE p_bseg_lines.
    At least one line chosen by the user is not for challan updation.
          MESSAGE e701(8i).
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>.
    This is a clear case,that you are trying to post some documents
    which does not match with the selection parameters.
    I feel the above problem could be due to some document/s (open items of
    the earlier years)are incorrect which is causing the reported problem.
    Kindly run the challan update program for smaller date range so that you
    can find the faulty document.
    Hope this solves your query.
    Reg
    Madhu M

Maybe you are looking for