Tax Manager is not a valid responsibilty
Hi,
EBS R12.1.1
I activated/installed the module E-Business Tax, and add the Tax Manager to my userid.
But when I click some tax sextup, I got error ***Tax Manager is not a valid responsibilty for the current user. Please contact your system administrator***
How do I resolve this please....
Thanks
Samantha L
Edited by: user_unlimited on Mar 30, 2010 11:52 PM
Well its is not really a problem of cache. When you add a Web-base (self-service oracle Page) responsibility to your user, usually the message you got appears for the first time. Instead of clearing the cache, you could wait for about 30mins or 1hr and relog to the responsibility,then you may access the pages.
Me I clear the cache to save waiting time ...
Did it work for you?
Similar Messages
-
External Content Typ: "Connection manager did not return valid connection."
Hi,
I created an external content typ in the sharepoint designer which takes my custom WCF Service as a data source. I sucessfully added all my required operations and created a new list based on the new content typ. At first I had a security issue which I got
resolved by editing my BDC configuration in the Central Administration. Now I face a new issue. When I open my external list the BDC Service gives me the following error message:
"Connection manager did not return valid connection."
Has someone a solution for this kind of message?
Thanks,
EricHi,
I got the same error "Connection manager did not return valid connection.". In the error log it shows
09/17/2010 12:21:35.28 w3wp.exe (0x13FC) 0x0F60 Business Connectivity Services Business Data
a5t8 Medium Chose 'PassThrough' auth mode cb34d6ff-663a-4872-9022-21782a7be122
09/17/2010 12:21:35.28 w3wp.exe (0x13FC) 0x0F60 Business Connectivity Services Business Data
a5uo Medium Initialized WcfSystemUtility for LobSystemInstance with Id '144'. cb34d6ff-663a-4872-9022-21782a7be122
09/17/2010 12:21:35.28 w3wp.exe (0x13FC) 0x0F60 Business Connectivity Services Business Data
a5up Medium Wcf Service AuthN Mode: PassThrough cb34d6ff-663a-4872-9022-21782a7be122
09/17/2010 12:21:35.28 w3wp.exe (0x13FC) 0x0F60 Business Connectivity Services Business Data
f8dk Medium Checking for current connection to SystemInstance: NewCustomer cb34d6ff-663a-4872-9022-21782a7be122
09/17/2010 12:21:35.28 w3wp.exe (0x13FC) 0x0F60 Business Connectivity Services Business Data
a5s9 Medium Creating ClientBase object with type : BCSServiceProxy.WCFCustomerClient cb34d6ff-663a-4872-9022-21782a7be122
09/17/2010 12:21:35.29 w3wp.exe (0x13FC) 0x0F60 Business Connectivity Services Business Data
a5tz Unexpected System.MissingMethodException: Method not found: 'Void Microsoft.BusinessData.SystemSpecific.Wcf.IBdcClientBase.set_ActAs(Boolean)'. at Microsoft.SharePoint.BusinessData.SystemSpecific.Wcf.WcfConnectionManager.ConfigureCredentials(Type
clientBaseType, Object clientBase) at Microsoft.SharePoint.BusinessData.SystemSpecific.Wcf.WcfConnectionManager.CreateClientBase() at Microsoft.SharePoint.BusinessData.SystemSpecific.Wcf.WcfConnectionManager.GetConnection()
at Microsoft.SharePoint.BusinessData.SystemSpecific.Wcf.WcfSystemUtility.ExecuteStatic(IMethodInstance methodInstance, ILobSystemInstance lobSystemInstance, Object[] args, IExecutionContext context) cb34d6ff-663a-4872-9022-21782a7be122
Can you help me on this?
Thanks in advance
Thybu -
INSERT INTO EMP VALUES (7698, 'BLAKE', 'MANAGER', ORA-01843: not a valid m
One problem occured creating tables from old demobld.script:
all inserts where accepted, but this one:
INSERT INTO EMP VALUES
(7698, 'BLAKE', 'MANAGER', 7839,
TO_DATE('1-MAY-1981', 'DD-MON-YYYY'), 2850, NULL, 30);
COMMIT;
Changing the month into FEB helped.
Bug?
ORACLEXE running on Windows XP Home Edition.
No problems with installing.
Cheers,
Huub.OK - I'm guessing that your OS uses Dutch language and locale settings and you did not ichange these settings when you installed XE. <g>
On my XE system, I did the following:
SQL> connect hr/hr
Connected.
SQL> alter session set nls_date_language='DUTCH'
2 /
Session altered.
SQL> select to_date('1-MAR-1981','DD-MON-YYYY') from dual;
select to_date('1-MAR-1981','DD-MON-YYYY') from dual
ERROR at line 1:
ORA-01843: not a valid month
SQL> select to_date('1-OCT-1981','DD-MON-YYYY') from dual;
select to_date('1-OCT-1981','DD-MON-YYYY') from dual
ERROR at line 1:
ORA-01843: not a valid month
SQL> select to_date('1-OKT-1981','DD-MON-YYYY') from dual;
TO_DATE('1-OKT-198
01-OKT-81
SQL> alter session set nls_date_language='ENGLISH';
Session altered.
SQL> select to_date('1-MAR-1981','DD-MON-YYYY') from dual;
TO_DATE('1-MAR-198
01-MAR-81
SQL>
So - I guess you want to change the NLS_DATE_LANGUAGE (or other NLS setting) to English when you want to load english month format. -
IRecruitment Manager,SR BUSINESS GROUP is not a valid responsibility
Hi
I've added the iRecruitment Manager responsability to my user id and assigned the mandatory security profiles
when i try to acces any of the functiona in the menu i am getting the folowing error
'iRecruitment Manager,SR BUSINESS GROUP is not a valid responsibility for the current user. Please contact your System Administrator.'
Is there any specific profile for this issue.I crossed check the profiles with the implementation guide too but i am not able to resolve it
Thanks
Regards
Ramesh Kumar SHi Nagasuresh
HR:Business Group, HR: Security profile,
HR: User type and few mandatory profiles for iRecruitment is also set correctly and i've rechecked it also
But i couldn't find out the reason for this issue. i've faced similiar issue once with the oracle sales but i lost track how I resolved it
Any suggestion would be really great
Regards
Ramesh Kumar S -
Error code "A valid key code to use the Business View Manager is not found"
Hello.
I am trying to resolve this message in the Business View Manager. The message of " A valid key code to use the Business View Manager is not found" appears when accessing a folder in the Repositiry Explorer. I have admin rights for View, Edit and Set Security.
What am I doing wrong?Try running this query in the CMS Query Builder tool:
Select * from CI_SystemObjects where si_id = 4
When the query returns, look for the attribute "SI_CAN_USE_METADATA" and see if its set to false. Or see if something else in there is set to false that looks more suitable. Your keycode might have the BusinessView manager locked out. The error sounds more like a keycode restriction than a permissions issue with security. -
My HDD crashed and I had to reinstall my boot and programmes on a new HDD. I managed to recover my library.itl. How can i import it with the new version of itunes? When i try imprt playlist, it replies that it is not a validly exported file.
It should be like the very first time you synced your phone with I-Tunes. It will notice you haven't synced before and just copy everything from your phone into I-Tunes. It shouldn't delete anything from the phone, at least it never has for me. It just puts a copy of everything into I-Tunes and even if you delete an app for example from your phone and you decide you want it back later, you can just go back into I-Tunes and copy it back over. Hope this helps.
-
SAP Download Manager exe: " is not a valid win32 application"
Hi,
I just cannot find any solution this issue.
I downloaded from the SDN the SAP Solution Manager (exe File) to a 64 bit machine.
But when I double click the EXE-File to start the installation I get the following error message:
....exe is not a valid win32 application.
The machine is a 64 bit one so I woinder what the win32 is required?
All the solutions I can find are talking about virus etc.. but I do not believe this.
Any feedback?
Best regards
HanseAtikHi,
yes DLM is a java application but normaly it should be installed via the exe file. This is what I wonder.
I just did the following:
Manual installation
Download the Download Manager Java Archive (958 KB).
Copy it to a directory where it can permanently reside:
Open a shell ("command prompt") and change directory (type: cd 'the directory name') to the directory to which the Download Manager Java Archive was copied.
At the prompt, type: java -classpath "DLManager.jar" dlmanager.Application
The Download Manager application starts up
And it works now by this means it be started.
But I wish to install it and be also listed under the installed programs.
Anyway I can live with this now
Thanks -
Bdoc error - Tax code 1 not valid
Hello everyone,
I am getting BDoc error "Tax code 1 not valid" . I downloaded the object "DNL_CUST_TAX" from R3 to CRM. After doing this, the BP's went through successfully from R3 to CRM.However while sending BP's from CRM to R3 , same error occured. Is there any other object which can be downloaded from CRM to R3. or any other way out??
- Arpita Shah.Hi Arpitha,
Download the object DNL_CUST_TAX to CRM system then reprocess the errpr bdoc.
and let me know the status.
If the bdoc is in the red state after reprocessing,i think u need to create tax group in CRM img.
<b>Allot points if my post helps!!!!!!!!!!</b>
Regards,
Sathya Reddy. -
Enterprise Manager is not able to connect to the database instance....
Hi all,
Currently i'm facing a big issue here.
I have install the Oracle 10g on Window 2003 SE.
And currently the Enterprise manager is not be able to conenct to the database and my database is still running.With my listener is up.
But from the Enterprise manager's it show that everythg is down.
and when i try to restart it,i ask for os id and password and dbuser and dbpassword.
frm the SQL plus,i can easily startup and shutdown the database.
So i would like to know i can rectify this problem.
please kindly help me.I have post the setting of the databse as below
tnsnames.ora
==========
# Filename......: tnsnames.ora
# Created.......: created by SAP AG, R/3 Rel. >= 6.10
# Name..........:
# Date..........:
# @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#4 $
SDB.WORLD=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = SAP_SOLMAN)
(PORT = 1527)
(CONNECT_DATA =
(SID = SDB)
(GLOBAL_NAME = SDB.WORLD)
sqlnet.ora
========
# sqlnet.ora Network Configuration File: E:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\sqlnet.ora
# Generated by Oracle configuration tools.
# 05.01.06 set to default
#TCP.NODELAY=YES
# 05.01.06 set to 32768
# 05.01.06 unsorported parameter now
#NAME.DEFAULT_ZONE = WORLD
# 05.01.06 set the default to 10
# Filename......: sqlnet.ora
# Created.......: created by SAP AG, R/3 Rel. >= 6.10
# Name..........:
# Date..........:
# @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/SQLNET.ORA#4 $
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT, HOSTNAME, LDAP)
NAMES.DEFAULT_DOMAIN = WORLD
DEFAULT_SDU_SIZE = 32768
SQLNET.EXPIRE_TIME = 10
Listener.ora
=========
# Filename......: listener.ora
# Created.......: created by SAP AG, R/3 Rel. >= 6.10
# Name..........:
# Date..........:
# @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = SDB.WORLD)
(ADDRESS=
(PROTOCOL = IPC)
(KEY = SDB)
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = SAP_SOLMAN)
(PORT = 1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = SDB)
(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
Listener status
===========
LSNRCTL> status
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=SDB.WORLD))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 15-AUG-2006 15:14:48
Uptime 0 days 2 hr. 43 min. 31 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File E:\oracle\product\10.2.0\db_1\network\admin\listener.o
ra
Listener Log File E:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\SDB.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\SDBipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SAP_solman)(PORT=1527)))
Services Summary...
Service "SDB" has 1 instance(s).
Instance "SDB", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
emoms.log
========
2006-08-15 18:03:20,562 [HttpRequestHandler-2254042] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = Io exception: The Network Adapter could not establish the connection
2006-08-15 18:03:21,547 [HttpRequestHandler-2254042] WARN jdbc.ConnectionCache _getConnection.303 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
2006-08-15 18:03:21,547 [HttpRequestHandler-2254042] WARN jdbc.ConnectionCache _getConnection.306 - Io exception: The Network Adapter could not establish the connection
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:111)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:145)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:254)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:386)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:493)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:164)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:767)
at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:324)
at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:114)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getNewPoolOrXAConnection(OracleConnectionCacheImpl.java:694)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getPooledConnection(OracleConnectionCacheImpl.java:540)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:346)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:324)
at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:296)
at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:423)
at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:156)
at oracle.sysman.emSDK.svc.conn.ConnectionService.getPrivateConnection(ConnectionService.java:605)
at oracle.sysman.emdrep.receiver.OMSHandshake.getParameterFromDB(OMSHandshake.java:387)
at oracle.sysman.emdrep.receiver.OMSHandshake.getMaxAgentCompatVer(OMSHandshake.java:369)
at oracle.sysman.emdrep.receiver.OMSHandshake.handshake(OMSHandshake.java:794)
at oracle.sysman.emdrep.receiver.OMSHandshake.handshake(OMSHandshake.java:648)
at oracle.sysman.emdrep.receiver.FxferRecv.doGet(FxferRecv.java:658)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:239)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
2006-08-15 18:03:22,531 [HttpRequestHandler-2254042] ERROR eml.OMSHandshake getParameterFromDB.402 - Io exception: The Network Adapter could not establish the connection
2006-08-15 18:03:22,531 [HttpRequestHandler-2254042] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://SAP_solman:3938/emd/main)(ERROR = INTERNAL_ERROR)
2006-08-15 18:03:35,547 [HttpRequestHandler-9249408] WARN jdbc.ConnectionCache _getConnection.303 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
2006-08-15 18:03:35,547 [HttpRequestHandler-9249408] WARN jdbc.ConnectionCache _getConnection.306 - Io exception: The Network Adapter could not establish the connection
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:111)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:145)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:254)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:386)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:493)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:164)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:767)
at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:324)
at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:114)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getNewPoolOrXAConnection(OracleConnectionCacheImpl.java:694)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getPooledConnection(OracleConnectionCacheImpl.java:540)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:346)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:324)
at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:296)
at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:423)
at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:156)
at oracle.sysman.emSDK.svc.conn.ConnectionService.getPrivateConnection(ConnectionService.java:605)
at oracle.sysman.emSDK.svc.conn.ConnectionService.getRepositoryVersionAndMode(ConnectionService.java:368)
at oracle.sysman.emSDK.svc.conn.ConnectionService.verifyRepositoryEx(ConnectionService.java:395)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:144)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
2006-08-15 18:03:36,531 [HttpRequestHandler-9249408] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = Io exception: The Network Adapter could not establish the connection
2006-08-15 18:03:36,531 [EMUI_18_03_36_/console/aboutApplication] ERROR em.console doGet.311 - java.lang.IllegalStateException: Response has already been committed
java.lang.IllegalStateException: Response has already been committed
at com.evermind.server.http.EvermindHttpServletResponse.resetBuffer(EvermindHttpServletResponse.java:1901)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:211)
at oracle.sysman.emSDK.svlt.PageHandler.render(PageHandler.java:773)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:396)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:688)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:291)
at oracle.sysman.eml.app.Console.doGet(Console.java:135)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:101)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:123)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:239)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
OracleDBConsoleSDBsrvc.log
======================
-------------- [OracleDBConsoleSDB] ------------
EMDROOT=E:\oracle\product\10.2.0\db_1
ORACLE_HOME=E:\oracle\product\10.2.0\db_1
EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
08/09/06 15:11:59 Start pending...
08/09/06 15:11:59 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
08/09/06 15:12:04 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
08/09/06 15:12:04 Tracking process launch...
08/09/06 15:12:41 Received exitCode 3 from emctl istatus
08/09/06 15:12:41 dbconsole started
08/11/06 08:46:03 Recieved ServCtrlHdlr command, 5
08/11/06 08:46:03 Stopping dbconsole
08/11/06 08:46:03 Launching stop EMD process...
08/11/06 08:46:03 Waiting for stop EMD process to exit. numRetries=74
08/11/06 08:46:06 Stop process has exited with exitCode: 0
08/11/06 08:46:06 Waiting for emwd process to exit. numRetries=74
08/11/06 08:46:06 Watchdog process exited with exit code 15
08/11/06 08:46:06 Signal Shutdown event.
08/11/06 08:46:06 Shutdown thread exited.
08/11/06 08:46:06 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
-------------- [OracleDBConsoleSDB] ------------
EMDROOT=E:\oracle\product\10.2.0\db_1
ORACLE_HOME=E:\oracle\product\10.2.0\db_1
EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
08/11/06 08:45:17 Start pending...
08/11/06 08:45:17 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
08/11/06 08:45:26 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
08/11/06 08:45:26 Tracking process launch...
08/11/06 08:46:11 Received exitCode 3 from emctl istatus
08/11/06 08:46:11 dbconsole started
08/11/06 08:48:58 Recieved ServCtrlHdlr command, 5
08/11/06 08:48:58 Stopping dbconsole
08/11/06 08:48:58 Launching stop EMD process...
08/11/06 08:48:58 Waiting for stop EMD process to exit. numRetries=74
08/11/06 08:49:02 Stop process has exited with exitCode: 0
08/11/06 08:49:02 Waiting for emwd process to exit. numRetries=74
08/11/06 08:49:02 Watchdog process exited with exit code 15
08/11/06 08:49:02 Signal Shutdown event.
08/11/06 08:49:02 Shutdown thread exited.
08/11/06 08:49:02 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
-------------- [OracleDBConsoleSDB] ------------
EMDROOT=E:\oracle\product\10.2.0\db_1
ORACLE_HOME=E:\oracle\product\10.2.0\db_1
EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
08/11/06 08:53:20 Start pending...
08/11/06 08:53:20 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
08/11/06 08:53:29 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
08/11/06 08:53:29 Tracking process launch...
08/11/06 08:54:14 Received exitCode 3 from emctl istatus
08/11/06 08:54:14 dbconsole started
08/11/06 11:37:30 Recieved ServCtrlHdlr command, 5
08/11/06 11:37:30 Stopping dbconsole
08/11/06 11:37:30 Launching stop EMD process...
08/11/06 11:37:30 Waiting for stop EMD process to exit. numRetries=74
08/11/06 11:37:34 Stop process has exited with exitCode: 0
08/11/06 11:37:34 Waiting for emwd process to exit. numRetries=74
08/11/06 11:37:34 Watchdog process exited with exit code 15
08/11/06 11:37:34 Signal Shutdown event.
08/11/06 11:37:34 Shutdown thread exited.
08/11/06 11:37:34 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
-------------- [OracleDBConsoleSDB] ------------
EMDROOT=E:\oracle\product\10.2.0\db_1
ORACLE_HOME=E:\oracle\product\10.2.0\db_1
EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
08/11/06 11:36:48 Start pending...
08/11/06 11:36:48 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
08/11/06 11:36:56 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
08/11/06 11:36:56 Tracking process launch...
08/11/06 11:37:41 Received exitCode 3 from emctl istatus
08/11/06 11:37:41 dbconsole started
08/15/06 09:31:52 Recieved ServCtrlHdlr command, 5
08/15/06 09:31:52 Stopping dbconsole
08/15/06 09:31:52 Launching stop EMD process...
08/15/06 09:31:52 Waiting for stop EMD process to exit. numRetries=74
08/15/06 09:31:56 Stop process has exited with exitCode: 0
08/15/06 09:31:56 Waiting for emwd process to exit. numRetries=74
08/15/06 09:31:56 Watchdog process exited with exit code 15
08/15/06 09:31:56 Signal Shutdown event.
08/15/06 09:31:56 Shutdown thread exited.
08/15/06 09:31:56 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
-------------- [OracleDBConsoleSDB] ------------
EMDROOT=E:\oracle\product\10.2.0\db_1
ORACLE_HOME=E:\oracle\product\10.2.0\db_1
EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
08/15/06 09:31:06 Start pending...
08/15/06 09:31:06 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
08/15/06 09:31:14 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
08/15/06 09:31:14 Tracking process launch...
08/15/06 09:31:49 Did not hear back from emctl istatus.
08/15/06 09:31:49 Waiting a further 5 secs...
08/15/06 09:31:51 Received exitCode 3 from emctl istatus
08/15/06 09:31:51 dbconsole started
08/15/06 15:15:31 Recieved ServCtrlHdlr command, 5
08/15/06 15:15:31 Stopping dbconsole
08/15/06 15:15:31 Launching stop EMD process...
08/15/06 15:15:31 Waiting for stop EMD process to exit. numRetries=74
08/15/06 15:15:34 Stop process has exited with exitCode: 0
08/15/06 15:15:34 Waiting for emwd process to exit. numRetries=74
08/15/06 15:15:34 Watchdog process exited with exit code 15
08/15/06 15:15:34 Signal Shutdown event.
08/15/06 15:15:34 Shutdown thread exited.
08/15/06 15:15:34 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
-------------- [OracleDBConsoleSDB] ------------
EMDROOT=E:\oracle\product\10.2.0\db_1
ORACLE_HOME=E:\oracle\product\10.2.0\db_1
EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
08/15/06 15:14:46 Start pending...
08/15/06 15:14:46 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
08/15/06 15:14:54 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
08/15/06 15:14:54 Tracking process launch...
08/15/06 15:15:29 Did not hear back from emctl istatus.
08/15/06 15:15:29 Waiting a further 5 secs...
08/15/06 15:15:32 Received exitCode 3 from emctl istatus
08/15/06 15:15:32 dbconsole started
Command prompt for emctls status
=========================
E:\oracle\product\10.2.0\db_1\BIN>emctl status
Environment variable ORACLE_SID not defined. Please define it.
emd.properties
===========
# perl executable directory
perlBin=E:\oracle\product\10.2.0\db_1\perl\5.8.3\bin\MSWin32-x86-multi-thread
# script directory
scriptsDir=E:\oracle\product\10.2.0\db_1/sysman/admin/scripts
# emd Root directory(read-only location). Metrics should not create files
# under this directory
emdRoot=E:\oracle\product\10.2.0\db_1
# agent Root directory(writeable).
# Use this property to base any temporary file creation.
agentStateDir=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB
# Chronos root directory
chronosRoot=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/emd/chronos
# OMS Upload URL
# if there is no receiving OMS or if you wish to disable the UploadManager
# please set this value to empty or comment out below line
REPOSITORY_URL=http://SAP_solman:5500/em/upload/
# Proxy settings used for fetchlets. not applicable for uploader.
#proxyHost=www-proxy.us.oracle.com
#proxyPort=80
#dontProxyFor=.us.oracle.com
# If it is necessary to go through an http proxy server to get to the
# repository, uncomment the following two lines
#REPOSITORY_PROXYHOST=
#REPOSITORY_PROXYPORT=
#REPOSITORY_PROXYREALM=%EM_REPOS_PROXYREALM%
#REPOSITORY_PROXYUSER=%EM_REPOS_PROXYUSER%
#REPOSITORY_PROXYPWD=%EM_REPOS_PROXYPWD%
# This string is used by the agent to connect to remote targets
# ***IMPORTANT*** Do not change the contents of this setting. Only the
# install should modify this value.
agentSeed=1329576760
# This string is used by the agent to determine which algorithm to use for encrypted data
# The string value will be same as the release version
agentVersion=10.1.0.4.0
# How long, in minutes, collector will wait until next load.
UploadInterval=5
# If an upload fails, we want to backoff by UploadFailBackoff
# percentage more each time for each successive upload failure
# e.g. if we start the retry at 1 minute. If we fail in our next
# upload attempt, we try again 1minute 12 seconds later etc.
UploadFailBackoffPct= 20
# Maximum amount of time, in seconds, upload will wait for response from
# repository before timing out.
# 0 means infinite.
UploadTimeout=1800
# Timeout for upload a file, HealthMonitor will abort the EMD process if
# UploadManager does not finish uploading one file within this time
# Unit is minite, the default value is 1 hour ( 15 Min)
#UploadMaxTime=15
# How big the file the collector will upload (in KB)
# the actual file size could be slightly bigger.
# This is only a guidance.
UploadFileSize=2048
# The maximum number of megabytes(MB) the upload manager will support in the
# upload directory before temporarily being disabled
UploadMaxBytesXML=50
# The maximum number of files the upload manager will support in the
# upload directory before temporarily being disabled
UploadMaxNumberXML=5000
# The maximum amount (%) of disk space that can be used on the EMD filesystem
# before the following is disabled:
# - Collection of data (upload manager)
# - Logging and tracing
UploadMaxDiskUsedPct=98
# The amount (%) of disk space that can be used on the EMD filesystem
# before the following is re-enabled after being disabled previously:
# - Collection of data (upload manager)
# - Logging and tracing
UploadMaxDiskUsedPctFloor=95
# Time out for the Agent to think that the access to the database could be
# hung. The Agent would not allow more threads to go and hang with a database
# if any one access to the database does not return within DbHangTimeout
# seconds.
# The more the timeout more the possibility of allowing more threads
# to be hung in the EMD with a bad database.it is specified in seconds.
#DbHangTimeout=200
# The script to run if disk space usage exceeds parameters or if certain other
# error conditions occur.
#emdFailureScript=emdfail.command
# The location of the file that contains the root certificate.
emdRootCertLoc=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/config/b64LocalCertificate.txt
internetCertLoc=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/config/b64InternetCertificate.txt
# The download URL for the EMD Oracle Wallet and its local file location.
# Note: Ensure that this URL references a valid port number at which the
# console is available on http
emdWalletSrcUrl=http://SAP_solman:5500/em/wallets/emd
emdWalletDest=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/config/server
# The email address for out-of-band notifications
emd_email_address=
emd_email_gateway=
# The return email address for out-of-band notifications
emd_from_email_address=
# EMD main servlet URL
EMD_URL=http://SAP_solman:3938/emd/main
# Whether the EMD should listen on all NICs on the current host (the default)
# or just the NIC associated with the hostname in EMD_URL
AgentListenOnAllNICs=TRUE
# This parameter indicates the thread model to use. uncomment one of the
# following ThreadPoolModel line to indicate the model, agent need to use.
# SMALL if number of targets is less than 11.
# MEDIUM if number of targets is from 11 to 50.
# LARGE if number of targets is greater than 50.
# This parameter can be overriden by 'MaxThreads' which indicates the maximum
# number of threads that CEMD can have running at any point of time. User can
# mostly use the other parameter ThreadPoolModel to indicate what model for the
# agent to use.
# ThreadPoolModel = SMALL
# ThreadPoolModel = MEDIUM
# ThreadPoolModel = LARGE
# This parameter indicates the stack size, threads have to be created with.
# we can set it to 0 to use the OS default value.
# In some version of solaris(such as 2.9 ) specify a stack size may cause Java Hotspot warning
# when JVM is used.
NormalThreadStackSize=0
#Signals that users want to ignore.
#It can be one or combination of SIGTERM, SIGINT
# The signals can listed with ',' as delimiter.
#IgnoreSignals=
# This property is NO LONGER USED for host config collection (instead, hostConfigClasspath is used).
# If noone else uses it, it can be removed.
ouiLoc=E:\oracle\product\10.2.0\db_1/oui
# Classpath for host config collection
# VERY IMPORTANT NOTE: If you change the host config classpath entries in this section, you HAVE
# to change the HOST_CONFIG_TEST_CLASSPATH entry in the utl/emdwqaenv file too.
# NOTE: if the location of emd_java.jar and/or log4j-core.jar is changed
# make sure that appropriate changes are also made
# to the CLASSPATH variable in this file if necessary
# PORTING NOTE: Check OUI-required jar files for OUI APIs to work. They could be different on your platform.
# Also, our version of xmlparserv2.jar must be compatible with the one OUI expects (both OUI and ECM use XML parser).
hostConfigClasspath=E:\oracle\product\10.2.0\db_1/oui/jlib/xmlparserv2.jar;E:\oracle\product\10.2.0\db_1/oui/jlib/OraInstaller.jar;E:\oracle\product\10.2.0\db_1/oui/jlib/srvm.jar;E:\oracle\product\10.2.0\db_1/oui/jlib/share.jar;E:\oracle\product\10.2.0\db_1/sysman/jlib/emd_java.jar;E:\oracle\product\10.2.0\db_1/sysman/jlib/log4j-core.jar
# JAVA HOME required for JavaExt metric calls
JAVA_HOME=E:\oracle\product\10.2.0\db_1/jdk/jre
# CLASSPATH required for JavaExt metric calls
CLASSPATH=E:\oracle\product\10.2.0\db_1/sysman/jlib/emd_java.jar;E:\oracle\product\10.2.0\db_1/opmn/lib/ons.jar;E:\oracle\product\10.2.0\db_1/lib/xmlparserv2.jar;E:\oracle\product\10.2.0\db_1/sysman/jlib/log4j-core.jar;E:\oracle\product\10.2.0\db_1/oc4j/j2ee/home/lib/http_client.jar;E:\oracle\product\10.2.0\db_1/lib/dms.jar;E:\oracle\product\10.2.0\db_1/lib/dmsEmd.jar;E:\oracle\product\10.2.0\db_1/jlib/share.jar;E:\oracle\product\10.2.0\db_1/jdbc/lib/ojdbc14dms.jar;E:\oracle\product\10.2.0\db_1/jlib/jssl-1_1.jar;E:\oracle\product\10.2.0\db_1/jlib/javax-ssl-1_1.jar;E:\oracle\product\10.2.0\db_1/jlib/ojmisc.jar;E:\oracle\product\10.2.0\db_1/lib/em_test.jar;E:\oracle\product\10.2.0\db_1/jlib/ojmisc.jar;E:\oracle\product\10.2.0\db_1/jlib/repository.jar;E:\oracle\product\10.2.0\db_1/opmn/lib/optic.jar
# this is the java option
#JAVA_OPTIONS=-Xmx128m
# These are the optional Java flags for the in-process Java
# Native Interface (JNI)
agentJavaDefines=-Doracle.dms.refresh.wait.time=1000 -DUrlTiming.UseJSSE=true
# When set to true, the emd.log and emd.trc file will be appended by a pid
# For example:
# emd_15789.log
# emd_15789.trc
# By default, it is not set for regression test purpose.
# After installed, please uncomment this line because when EMD is restarted,
# previous log information will be lost if not set to true.
#LogFileWithPID=true
# Default log file maximum size before rolling in Kilobytes
LogFileMaxSize=4096
# Maximum number of log file roll files to maintain before deletion
LogFileMaxRolls=4
# Default trace file maximum size before rolling in Kilobytes
TrcFileMaxSize=4096
# Maximum number of trace file roll files to maintain before deletion
TrcFileMaxRolls=4
# To enable the metric browser, uncomment the following line
# This is a reloadable parameter
#enableMetricBrowser=true
# To disable Remote operations (non-reachable agent) uncomment the following
# line:
#disableRemoteOperations=true
# add an additional admin path from which the agent will read additional
# target metadata. The specified path should have the mandatory 4 directories
# under it. 1. metadata 2. scripts 3. default_collection 4. discover
#altAdminPath=<additional admin path>
# The health monitor executes callbacks in a separate thread. if for some
# reason the threads spawned from health monitor to execute callbacks are
# hung, the agent could run out of resource and freeze.
# so when the current thread count spawned from the Health monitor reaches
# this limit, the agent is bounced. the default is set to 5.
#MaxHealthMonitorThreads=5
# dynamicPropsComputeTimeout default to 30s
dynamicPropsComputeTimeout=60
# emagent perl tracing levels
# supported levels: DEBUG, INFO, WARN, ERROR
# default level is ERROR
EMAGENT_PERL_TRACE_LEVEL=ERROR
# other optional parameters for perl tracing
# EMAGENT_PERL_TRACE_DIR default to $ORACLE_HOME/sysman/log
#EMAGENT_PERL_TRACE_DIR=
# EMAGENT_PERL_TRACE_FILESIZE default to 5M
#EMAGENT_PERL_TRACE_FILESIZE=5
# this section define the logging level for each component,
# it is "reloadable", you can change the level at runtime to reset
# the logging level, but if you remove the line, it will not be
# changed.
tracelevel.main=WARN
tracelevel.emSDK.xml=WARN
tracelevel.emSDK.utl=WARN
tracelevel.ResMonitor=WARN
tracelevel.Dispatcher=WARN
tracelevel.ThreadPool=WARN
tracelevel.pingManager=WARN
tracelevel.collector=WARN
tracelevel.http=WARN
tracelevel.ssl=WARN
tracelevel.ssl.io=WARN
tracelevel.blackouts=WARN
tracelevel.upload=WARN
tracelevel.command=WARN
tracelevel.reload=WARN
tracelevel.scheduler=WARN
tracelevel.Authentication=WARN
tracelevel.metadata=WARN
tracelevel.targets=WARN
tracelevel.TargetManager=WARN
tracelevel.engine=WARN
tracelevel.javaproc=WARN
tracelevel.vpxoci=WARN
tracelevel.javavm=WARN
tracelevel.fetchlets=WARN
tracelevel.fetchlets.os=WARN
tracelevel.fetchlets.osline=WARN
tracelevel.fetchlets.oslinetok=WARN
tracelevel.fetchlets.UDM=WARN
tracelevel.fetchlets.sql=WARN
tracelevel.fetchlets.url=WARN
tracelevel.fetchlets.urllines=WARN
tracelevel.fetchlets.urllinetoken=WARN
tracelevel.fetchlets.URLTiming=WARN
tracelevel.fetchlets.propEcho=WARN
tracelevel.fetchlets.readFromFile=WARN
tracelevel.fetchlets.readMultFromFile=WARN
tracelevel.fetchlets.throwable=WARN
tracelevel.fetchlets.resourceGrab=WARN
tracelevel.fetchlets.emSDK=WARN
# The following three properties are for HTTP timeout
# Timeout value for reading Http primary header, default is 30 seconds.
httpTimeoutPrimaryHeader=30
# Timeout value for reading http secondary headers, default is 30 seconds
httpTimeoutSecondaryHeaders=30
# Timeout value for reading http body, default is 60 seconds.
httpTimeoutBody=60
omsRecvDir=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\sysman\recv
agentTZRegion=+08:00
And i would like to know how to set up the environment variable for Oracle_HOME and ORACLE_SID.
Please kindly assist me on this.Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh -
Error Installing SQL Server Express 2008: '' is not a valid login or you do not have permission.
I have tried installing SQL Server 2008 multiple times on my machine, and I always receive this error about 3/4 of the way through: '' is not a valid login or you do not have permission.
I have tried installing both SQL Server Express 2008 with Tools and SQL Server Express 2008 with Advanced Services, and they both fail the same way. I am trying to do a new stand-alone installation.
I'm running Windows XP Home Edition SP3.
Looking into the error, some forums say I have to install it from THE Administrator account, and not an account with administrator permissions; it also cannot be in Safe Mode, because then the Windows Installer won't work. Unfortunately, I haven't been able to login to the Administrator account. I can go to the home login screen, do ctrl+alt+del twice, and attempt to login to the Administrator account, but I receive this error: Unable to Log You on because of an Account Restriction.
Other forums say that in the Server Configuration section, all you have to do is provide the username and a strong password from an administrative account on the computer, and it doesn't have to be THE Administrator. Well, I did that, but for some reason it doesn't recognize my username and password, it says something like "The credentials you provided for the SQL Server Agent are invalid". BUT THOSE ARE THE CORRECT CREDENTIALS FOR MY ADMINISTRATIVE USER! So I'm forced to use one of the accounts without a password, like NT AUTHORITY\SYSTEM. That's the only way I can get past this step.
Also, just FYI, on the next step, which is Database Engine Configuration, I am using Mixed Mode for the Security Mode. I AGAIN provide a password, and then add my current user (who IS an administrator on my machine!) to the SQL Server Administrators box.
But yet, it fails every single time.
This is pathetic and ridiculous. I must have tried to install this thing 15 times, that is not an exaggeration. I'm posting this on several other forums as well, maybe an MVP or Bill Gates himself can help me.
I have one of the log files from a failed installation. If someone would like to see it, I will post it.Papy Normand wrote:
Hello,
Please, could you have a look on the excellent answer of Mike Wachal you will find here :
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=4160294&SiteID=1
Don't hesitate to post again for more help or explanations
Have a nice day
PS : if you are talking about the Sql Server Agent Service, it is disabled for Sql Server Express. It is enabled only for the Workgroup/Standard/Dev and Entreprise Editions
Sorry, but I've tried the suggestion in that link, and it hasn't helped me.
For anyone wonder, the link is talking about the problem in Server Configuration where I enter my Windows user account and password (which is in the Administrative group), but it says the credentials are invalid. The link suggests that you need to either enter your Windows account (which I did, and it wouldn't let me go to the next step), or to use one of the built in accounts (which I also tried, but it gave me the " '' is not a valid login" error during the installation).
Any other ideas?
I haven't had any answers from any other forums either, so I'll just post my log file in case anyone wants to look at this:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2008-11-17 11:13:47
End time: 2008-11-17 12:17:25
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xBE029E38%400x12C2466D
Machine Properties:
Machine name: STEVEN
Machine processor count: 2
OS version: Windows XP
OS service pack: Service Pack 3
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: D:\x86\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: NT AUTHORITY\SYSTEM
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: STEVEN\Steven
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\ConfigurationFile.ini
ENABLERANU: False
ERRORREPORTING: False
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\SYSTEM
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: D:\
NPENABLED: 0
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\SYSTEM
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: STEVEN\Steven
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature: Analysis Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\SystemConfigurationCheck_Report.htm -
Enterprise Manager is not able to connect to the database instance. Open??
Hello there,
After I installed oracle database and tried to start Enterprise Manager, I got the message:
Enterprise Manager is not able to connect to the database instance.
All statuses are OK (green and up) except database instance. It is also green and up but open. (Details: The instance is open.)
Can anyone help me about it?
I use Windows XP x64 with all patches installed. Oracle database R11g x64.
I tried with different database versions and different machines and different OS and loopback adapter and... my EM still want to log in.
I can log in with sqlplus. It accepts any pass for sys (as sysdba). Why?
My log files are available here: http://195.66.185.187/log.zipYou are using a bequeath connection when logging in with SQL*Plus on the server so the password is not validated.
Log in using SQL*Plus this way:
sqlplus /nolog
followed by
conn sys@<service_name> AS SYSDBA
and provide the correct password
My guess it it will fail.
If so then you need to use the correct password and if you don't know what it is set it when logged on as SYS. -
Need help in understanding the error ORA-01843: not a valid month - ECX_ACT
Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu.Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu. -
Error FF753 Tax code 01 not appear in any G/L account item with FM Active
Hi
We have fund management configured for one of the company code, while creating billing document through VF01/VF02 we are getting the Error FF753 Tax code 01 not appear in any G/L account item.
This error however does not appear when posting directly from FI with the same tax code.
I have tried to change the message control in which case i am getting a dump pointing to PSM-FM.
Please advise.
Regards
SandeepHi:
If you could please refer to the contents of OSS Note 112609 - How are tax codes transferred to conditions ?
"Symptom
If a billing document is transferred to accounting the system displays error messages. Transferring tax codes from tax conditions into the pricing conditions and discounts does not function as expected.
Other terms
FF805, FF747, FF753, MWSKZ, MWSK1, tax code
Reason and Prerequisites
The tax condition in the SD pricing procedure contains incorrect reference steps, there are several tax conditions in the pricing procedure of which the tax codes overwrite each other or a program error exists.
Solution
In the accounting document for a billing document, the different G/L account line items are provided with a tax code. The tax code of the G/L accounts is transferred from the tax condition(s) of the billing document. How are the tax codes of the tax conditions transferred into the other conditions of a billing document ?
Basically:
The conditions of a billing document are read from top to bottom. As soon as an active tax (inactive = ' ') is read, the system transfers the tax code of this tax into the non-tax conditions as follows:
1. The reference steps (From-step, To-step) are read (the reference steps are defined in the pricing procedure).
2. The tax code is transferred into all conditions, for which
the step number of the condition lies in the pricing procedure between "From-step" and "To-step",
the condition is not inactive (exactly: the inactive flag is not equal to A (Condition exclusion), M (Inactive due to manual entry), or X (Incorrect)),
the condition is not statistical (if it is no invoice list condition),
the condition is no tax condition.
After the transfer of the tax code the system searches for the next active tax. If further taxes are found, their tax code is again transferred according to the above procedure. If the reference steps of different taxes overlap, tax codes that have already been transferred are overwritten. To all non-tax conditions which in the pricing procedure stand after the last tax condition the tax code of the last active tax condition is transferred if they are not statistical.
Special features:
1. If the "From-step" of a tax condition refers to a subtotal of the pricing procedure, the tax code of the tax is not only transferred into the conditions with step number between From-step and To-step but into all non-tax conditions for which
the step number of the condition in the pricing procedure is lower than the "To-step" of the tax condition.
the condition is not statistical (if it is no invoice list condition).
the condition is not a tax condition.
2. If the "To-step" of the tax condition is smaller than the "From-step", then the system sets "To-step = From-step".
Notes:
1. As of Release 4.0 the tax code is no longer transferred in pricing but only when the billing document is released to accounting.
2. If you use several taxes and tax codes and Customizing is incorrect for the release of billing documents to accounting, among others the system may display error message FF747.
3. If there are several taxes in the pricing procedure refer to Notes 72173 and 82091 for Releases 3.0D - 3.1G. For Release 3.1H, only note 82091 is relevant.
4. For conditions which are transferred into accounting (thus not statistical, not inactive conditions) and do not contain a tax code, the system searches for a default tax code which in Accounting Customizing can be set depending on the company code (tax code for non-taxable transactions). This applies to releases up to and including Release 4.5B. For Release 4.6, refer to Note 385127."
Regards -
Blue Screen with Text re IPOD size not being valid
Now everytime I reboot, I get a blue screen full of text about the IPOD size not being valid, and I have to hit the reset button to get out of the loop.
THEN, when I try to just wipe everything off the IPOD and start over/Restore, I get a message that says IPOD manager internal error.With the internal memory error message stopping Update, I went online to see if I could manually download the latest update...or any update. Even a previous version.
But to do that I have to go back to Itunes 7...The only reason I don't like version 7 is that my Ipod contents disappear from the Itunes source window when the Ipod is not connected to the computer.
Anyone know of a more reliable mp3 player ?
Thanks for letting me ramble.
Chip -
Error when installing VMM - %1 is not a valid Win32 application
Hi all
I'm attemping an install of SCVMM and despite installing all prerequisites I'm faced with the following when I launch the installer/disc and click 'Install':
"Error starting the Virtual Machine Manager Setup Wizard. %1 is not a valid Win32 application"
this error is the proceeded with another:
"Microsoft Visual C++ 2010 Redistributable was not successfully installed. The selected Virtual Machine Manager feature cannot be installed without this prerequisite. Retry setup or manually install Visual C++ 2010 Redistributable
from Microsoft Download Center."
The latter package is already installed and I have re-downloaded and re-installed as well to no avail. All .Net packages are installed too.
I'm running a Windows Server 2012 R2 x64 virtual machine in a HyperV host (HyperV Server 2012) and have navigated the disc and launched the "SetupVMM.exe" located in the amd64 directory as I realise the above Win32 error points to a x86 application
- still no joy, the same errors!
I have tried the installer in a VMWare 2012 server with the same error and on a physical Windows 7 machine again same error so this makes me think I'm either missing something basic or have overlooked something seems the environment doesn't seem to make
a difference (although obviously not attempted a x86 environment but SCVMM is listed as x86 or x64).
This is for a lab test and personal experience before production so I realise running SCVMM within a virtual machine that is hosted on the same hypervisor isn't good practice - but it's a start :)
Thanks in advance for any help you can give me.
SamAre you installing directly from the ISO? If so, you can try with a new ISO in case this is broken. Also make sure your machine is joined to the domain and that you are executing the setup in the context of a local administrator.
Eventually, try to copy the ISO to local disk and run setup from there.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )
Maybe you are looking for
-
On my desk computer, I tried to download the new Itunes 11 version. I had Itunes 10. It goes thru the whole process and then says "Apple Mobilve Devide failed to start, Verify you have sufficient privileges to start service. I hit retry and then
-
I want to compare two columns and replace any equal values with the value in a specific cell
I want to compare the numbers in two columns and replace all matching numbers in the second columns with the corresponding value from a cell in the same row as the matching number.
-
Best practice in Infoprovider & Query design for access by BO Universe
Hello Experts, Are there any best practices identified by practitioners or suggested by SAP for development of Infoprovider and queries for access by BO Universe. Best practices should be from the prospective of performance, design simplicity, adapta
-
I cloud. I can't see my apointments from my I phone/I pad in my outlook 2010, What do I need to do?
The new apointments or contacts i write in my Iphone 4 or in my Ipad 1 doesn't apear in my PC But in the other way the new appointments and contacts i write in my PC goes ok to my Iphone/Ipad...
-
Hazel is not supporting my credit card so I cant get it. But in the trial version Hazel has this property "Source URL/Address" which is the same information as "Where from" value in "Get info" in the contextual menu of a file. Does anyone know how t