Tax Name change

In R12, can the Tax Name of an existing Tax be changed?

one by one - or using load tools like LSMW if you really have several hundred records per one vendor.

Similar Messages

  • Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

    Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

    Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
    Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
    See http://www.alsoft.com/diskwarrior/

  • Vendor tax id change impacting 1099 reporting

    Hi
    Our business creates new vendors when there is a tax id change for the same vendor because they want the 1099 report to provide the tax id number associated with a certain payment document in 1099 report.
    This causes duplicate vendor numbers to be created for the SAME vendor. They truly do not want to be creating duplicate vendors and so
    would like to know how they can get 1099 report to provide the tax ids associated with a certain payment.
    How do the other companies handle this? What do you do when a certain vendor has had a TAX ID change?
    Thanks
    Depa

    Ok, I Found it. We have to customize it. Taxes are reported at Operating Unit level only.

  • Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.   When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

    Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
    When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
    I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
    However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
    So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
    Can I fully change the name without doing a complete re-install of Lion and all my apps?

    One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

  • Logical system name changes

    All,
    Has anyone faced a scenario where you need to change the logical name for any SAP system?
    For instance:
    System      Logical Name                                                    System      Logical name B
    BW                      A                     system is pointing to            ECC                  B
    ECC will be upgraded and system name will changed to C
    Is that possible? If so do you forsee any issues? Can we switch ECC B to ECC C with no issues?
    I appreciate any help.
    Regards

    Hello Mike,
    please elaborate a little more your inquiry. Are you talking about the ALE logical name changing? For this, please check the following notes:
    #544509 ALE: Converting the name of the "logical system"
    #121163 UTI: Logical System names
    If you're referring to a domain name changing (like a Windows domain name change) or a hostname change, please refer to the following notes:
    #96317:   Host names during R/3 upgrade, tips & tricks
    #1275273: Hostname change on 7.10/7.11 java stacks
    #757692:  Changing the hostname for J2EE Engine 6.40/7.0 installation
    #8307:    Changing host name on R/3 host: What do you do?
    #1070561: SMD: Best practice for planned domain name changes
    and on the following SDN threads:
    /message/9196590#9196590 [original link is broken]
    Re: Domain name change
    Re: Change the Domain Controller
    How to change hostname
    Change Domain Controller
    Or, lastly, you're talking about a SID change? On this case, you must perform a system copy to change de SID, please refer to the following note:
    #11692: Renaming the system ID
    (Sorry for the long and generic answer)
    I hope this information helps.
    Best regards,
    Tomas Black

  • Batch rename, name changes after frame 99

    Hi, I put a folder into bridge to do a batch rename and called the text MILAN/SYRIA and gave for first number 00.
    After frame 99 the name changed to a weird  Adobe Bridge Batch Rename Temp 10037
    Which you can see better in the RAW windows, the 99 and the following one.
    Photoshop doesn't like to open a name like that, can't blame her.
    of course I strongly suppose that I should have given 3 digits in Batch rename, and l am looking for your confirmation, and while I am here
    why was my card full at 0485 pictures when a folder I think takes as many as 9999, how do you finish a folder if your card is full?
    i suppose you change card and you keep going with the same folder? Sorry about the camera question, couldn't keep it, thanks dona

    no,no, i started with 00 two digits only, batch rename changed to 623  after i put the folder back in just in order to take the screenshot, i dont know why but that always happens if i put the folder back in after usage, but i do know for life now that if I am going to take over 100 shots, which is most of the time, i should start with 001 or 000.
    See, this is the first number that was given to the first file,  01,WHICH actually became  00, i don't have it here.
    So it rest to know where is "Preserve file name " in current metadata, and would that make it possible  to revert to the original CR2 number?
    Why not to change name straight from the new name? thanks

  • Outlook does not connect to Exchange 2013 after name change due to marriage

    When launching Outlook and clicking through the setup wizard to create a new profile, Outlook auto-discovers the correct email alias. When establishing a connection it successfully checks network connectivity and successfully searches the email settings.
    When it attempts to logon to the mail server the error comes up.
    "The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
    Clicking "Check Name" gives the error:
    "The name cannot be resolved. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
    The same result occurs with a manual setup.
    We are running Exchange Server 2013. User workstations are running Outlook 2013 on Windows 7 Pro. All updates have been applied as of March 31, 2015.
    All name changes have been made in AD and Exchange. Old aliases and new aliases are set in Exchange. Offline Address books are updated daily. The local profile and registry settings have been updated on the workstation and the user is successfully logging
    into the profile. The issue is only with Outlook 2013. User can access mail through OWA and ActiveSync on their mobile device.
    Logging the user into another workstation and running the wizard returns the same results, which rules out the possible problem being with the workstation.

    Hi,
    According to your description, I understand that failed auto-configure Outlook with error “The name cannot be resolved. The connection to Microsoft Exchange is unavailable…”, however OWA works fine.
    If I misunderstand your concern, please do not hesitate to let me know.
    Are all account or any special user experience this question?
    If OWA works fine, it indicate that the mailbox database is mounted, and mailbox works well.
    I notice that you have changed the account name before issue arise, because external access, the client locates the Autodiscover service on the Internet by using the primary SMTP domain address from the user's email address.
    More details about Autodiscover service, for your reference:
    https://technet.microsoft.com/en-us/library/bb124251.aspx?f=255&MSPPError=-2147217396
    Please try below command to force update address list, GAL, OAB, then test again:
    Get-AddressList | update-AddressList
    Get-GlobalAddressList | update-GlobalAdressList
    Get-OfflineAddressBook | Update-OfflineAddressBook
    If the issue persists, please wait for some time to complete configuration.
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

  • How to show the witholding tax name instead of the code in PLD

    Hi Guys,
    Is it possible to show the witholding tax name instead of the witholding tax code in the summary or end of report in the PLD(AR Invoice)?
    Thanks.
    Eric

    Hi Eric
    I have tried to get it directly from the table: Witholding Tax, field: WTaxName; but there's no way to relate that with the A/R Invoice document so it shows me a wrong WT Name.
    As this tables is not directly exposed/related to the document the best way is try to create a Formatted Search in order to get the description you want. Please note the WT is get from a table and if you have more than 1 type of WT it may not work in a End of Report as it does not have the capacity as repetitive area to read multiple lines.
    Paulo Calado
    SAP Business One Forums Team

  • InDesign CS4: File names change to string of numbers

    Occasionally, one of our users will save an InDesign CS4 file, only to have the file name change.  For example, a file originally named "#kwn25501.bcbsNM.indd" was saved as "#kwn25501.bc157-1223857848."
    If the user is not aware that this has happened, things can go horribly, terribly wrong in our production environment. The "numbered" file may be missing key elements, or be somehow be corrupt in some fashion. In one case, this led us to having to reprint a job because the "numbered" file was missing a photo; somehow, that file was used (and perhaps renamed after the fact) to create the final output.
    We use Macs running InDesign CS4 6.0.5. Some of our Macs are running Tiger 10.4.11, while others are running Leopard 10.5.8. The problem seems to related to the Leopard machines, although that is not 100 percent certain at this point. All of these Macs are bound to Active Directory and save files to a Windows 2003 server. I know Adobe recommends against working on files over a network, but perhaps there is an explanation for this file renaming aside from network issues.
    Any light that can be shed on this issue will be greatly appreciated. Thanks!
    Kevin Stauffer

    Check to see if maybe your original filename is the problem.
    You may need that particular name for a workflow reason, but some of the symbols in the middle of your filename are generally not a good idea. Especially working off of a server, file names should be ONLY alpha-numeric characters, no symbols, no periods (except for the file type) and only underscores or dashes to separate words, no spaces.
    The reason is some of those symbols get picked up as machine language and all sorts of bad can happen as a result.
    Message was edited by: Michael Riordan

  • E-mail Attachment Name Changes

    I have a following problem with mail attachments: When I drag the attachment from my mail window onto my desktop, the attachment name changes to "unknown". So for example, "cat.jpg" would become "unknown.jpg". To make this a bit more complicated, the problem is a bit random and from this it follows that sometimes the file keeps the original and correct file name and sometimes it changes it. Also, this problem occurs only when I drag the attachment (which normally is image) from email window, but if I pull the attachment from above the message window, where it has a little arrow and it shows all the attachment icons, this problem does not happen. I am running Tiger and Mail 2.1. It would we really great if you could take a sec to answer this if you have any idea at all what this problem might to be. Thanks!
    Best, Rauno

    Hi Rauno, and a warm welcome to the forums!
    Hmmm, since it's random, might try this...
    Quit Mail, then In your home folder, try moving this +folder & file+ to the Desktop then reboot...
    First, Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these files to the Desktop.
    /Users/YourUserName/Library/Caches/Mail
    Move to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    You can always move them back if it doesn't help.

  • Display name of shared calendar in Outlook clients after name change on the Exchange Server

    I have changed the name of a conference room resource calendar on the Exchange server but the name change is not being reflected in the end user's Outlook clients. I tested a remove/re-add and that worked but I cannot have everyone in the company do this.
    Is there anyway to force the change down to the Outlook clients?

    I don't know for sure, but if this is the case, then it's highly likely that the GUID is used by the client after its first view of the calendar.  From that point on, it appears it doesn't "revisit" the directory for updated names. 
    We'd need Outlook team feedback for confirmation.

  • Why does the PDFs' name change when i view them in the iBooks app?

    i have some past papers and marking schemes in my iTunes library....when i sync them to my iPad, they appear just fine....they are there just the way i named them and all...
    but when i open them, the name changes to some coded-ish name with lots of numbers and all that....
    is it possible for me to change some setting and save the name i want for those PDFs? Or am I going to have to live with this madness?
    please help!

    Hello, I wanted to follow up on this issue after reviewing some of the changes with the current update. [https://bugzilla.mozilla.org/show_bug.cgi?id=1049521] This bug addressed some Windows HKEYs that are changed when Firefox is updated/or installed.
    As an update, a patch has been made and changes are on the way for fresh installs of Firefox :-)

  • MSA Conntrans fails after machine name change

    Hi
    I have 5 remote laptops that have had their name changed and conntrans will no longer work.
    When I ran  SELECT @@SERVERNAME  on database it retunred old name so I then ran 
    sp_dropserver  'oldname'
    sp_addserver 'newname' , local
    Stop / start SQL server 
    SELECT @@SERVERNAME   now returns new name . However Conntrans still failing. Is the machine name embedded anywhere else ?
    The mobile application does open it appears to be just the conntrans process that will not function.
    Has anyone done this before ? Is it possible ?
    Best Regards M

    Hi Melita,
    Please check note 1253027. This should solve your problem.
    regards
    Vivek

  • Automatic update of Tax on change of tax driver  in SRM SC and PO

    Hello Experts,
    I ma facing one issue in Extended Classic secenario.
    At the time of creating the SC or PO the tax is calculated from the Vertex . So i already did a setting of calculted Tax in the Backend.
    Now when we create SC or PO the tax is calculated but once the document is created and we cahnge the Tax option form one to another Say form As US 4% to Vendors tax 5% ....So my system is not re-calculating the tax.
    We need to Automatic update of Tax on change of tax driver on SC and PO. Presently this is not a trigger for recalculating tax.
    Smriti

    Closed..

  • When downloading files the file name changes name?

    When I download files from yahoo email account the file name changes from actual name to securedownlad.doc. Why is this happening and how do I stop it? Is it an email client issue?
    Example:
    Original file name in email to download is called GeorgiaTechstinks.doc
    when downloaded the dl box pops up and file name has changed to securedownload.doc.
    I have to go and manually change file name back to GeorgiaTechstinks.doc
    any help would be greatly appreciated

    See here for information.
    (24629)

Maybe you are looking for