Tax pricing procedure for USA / Canada
Dear All,
We are creating a new SD pricing procedures for USA and Canada.. I have few clarifications on this.
1. May i know..what is the std pricing (inlculding the TAX condition type) for USA & Canada.
2. I have gone through the IDES system and found there are 2 pricing procedure RVCXUS & RVAJUS. What is the difference between these 2 pricing procedure..
Please help me to understand the purpose of having these above pricing procedures.
Thank you.
Regards,
Mani
Hello Mukul,
Thank you for your clarificaiton. However, i am still having the following clarifications.
1. Our client has confirmed that there is no tax in USA currently. But, by considering the future requirement, we are planning to go ahead with Jurisdiction tax procedure. Client may not use VERTEX system. In this situation. could you suggest..which pricing procure is suitable to the requirement.
2. For Canada... it is province/region based tax system. I think..here.. i will not be having any problem.
Please help me for USA tax pricing procedure to have a proper pricing procedure..which covers.. the future requriement also.. (means.. with Jurisdiciton code)...
May i know.. where the Percentage is maintained for each jurisdiction code...?
Thank you.
Regards,
Mani
Similar Messages
-
New tax code creation and pricing procedure for Sri Lanka
Hi,
I have one company code in India..Now I have requirement to create new plant under different company code in Sri Lanka.
Can anybody tell which tax pricing procedure is to be defined for Sri Lanka and what are different steps involved in the creation of new tax code for Sri Lanka.
Thanks & Regards
Sunil SinghHi Mr. Biju,
Thanks for reply...
Enterprise structure has already been decided. Everything we have copied from India for Sri Lanka and working fine except below error.
As I have already mentioned that I have copied tax pricing procedure for Sri Lanka from Taxinn then assigned to country code LK (Sri Lanka). I have created new tax code for LK (Sri Lanka) in FTXP then I have assigned the tax code with company code in SPRO Logestic General--- Basic settings.
After completeing this config, system is showing error" tax code is not defined to company code" in MIRO.
Please suggest...
Thanks & Regards
Sunil Singh -
Hi,
I have a scenario wherein in a sales order, for two different material, the tax base of pricing should get triggered on the basis of sold to party and the material entered at line item level.
Logic triggers on the basis of Region of Customer & a unique field in the Material Master but problem comes in the calculation of Tax base as the sequence of condition type (from – to) is already defined in the pricing procedure to pick from a particular step but in second line item the base is different i.e. the sequence of condition types that are maintained in pricing procedure should be different for Tax to calculate differently.
Kindly suggest if the same can be handled in a single pricing procedure and dynamically taking care of condition type sequence through Alt Cal Base Formula, so far I’ve tried both Alt Cal Formula & Base but it is not working
Client doesn’t want to go ahead by creating two different orders (through separate Pricing Procedure) for that. They want to have both materials in same order.
Kindly suggest a suitable way to handle this scenario.
Regards,
Aashika AgarwalHi,
Click on the ''check availability'' button at item overview and then click on ''One-time delivery'' on the top. This will ensure that you will have only one delivery for whatever quantity is confirmed on that date.
If you want to apply this rule for all orders across a sales area, then you can do the below configuration step :
SPRO->sales and distribution->basic functions->availability check with ATP logic->Define default settings-> Here in avail. checking rule select A (one time delivery). This will ensure that all orders created for a particular sales area will have only one delivery.
Hope this helps.
Regards,
Palani -
Excise duty in the Pricing Procedure for Local Purchase / Importation
Hi,
I'd like to know how to set up the pricing procedure for the purchase of an IS Oil Material; for local purchase and importation, especially with regards to the excise duty posting.
Local purchase: the vendor will bill us inclusive of the ED tax he previously paid, so the tax is just passed on to us.. My receiving location has ED paid status. In the PO item, we need to see this price (inclusive of tax) in the net price field.
Importation: the vendor only bills us the cost of the material. When we received the fuel, we paid ED tax to local tax authorities.
I know that both in these scenarios, the system has to determine the excise duty.
My questions are (1) how do you set up the excise duty condition type in the pricing procedure(or do they have to be maintained in the pricing procedure?) ? and (2) how do you set up this condition type in the config?
Thank you and hoping for your immediate feedback.
zccrHi,
You can use same pricing procedure
put 4 in subtotal in pricing procedure against the Discounr or freight cond
and in taxinn
BASb ALTCBV 362 and for jmop 363
But this will work only if same discount or freight value is in IV as that given in PO
if freing value changes in IV then its a problem
This is SAP bug, and SAP workes in that way only, freight value should be same in PO and IV
other solution
in taxinn create tax code like v8 vat 4% for 003 tax clasification
in ftxp create tax code V8 desc vat 4%
in fv11 for jvrd put 4
and at the time of IV put this tax code for freight amount
and for regular material value V1 tax code
this will work only if u have used acess seq MWST instead of JTAX pr JST1
hope this helps
Vipin -
Pricing procedure for Credit Memo request WITHOUT reference
Dear friends,
I have come across a requirement where credit memo request has to be created without reference to preceding document. i.e. for just giving some credit to customer may be for over pricing or giving some credit to customer (as to maintain good relation).
So generally we have different pricing procedure for Cr/Dr process.
thus i have different pricing procedure for Cr/Dr process than normal sales process.
here i have copied pricing procedure of normal sales and added extra condition type for manual pricing, which overrides basic pricing condition type.
but calculate the discount and taxes on the manual price.
I would like to know whether discounts and taxes condition type's should be used
in the cr/dr process without reference to preceding document. and suggest me the right condition types to be used in cr/dr pricing procedure without reference.
Thanks.HI,
Remove all the other condition types from the procedure and keep only those which you need.
Regards
Abhilash -
2 pricing procedures for the same sales area
Hi Gurus.,
My client requirement is the client requires 2 pricing procedures for the combination of Same sales areaDEocument Pricing procedurecustomer pricing procedure in OVKK
He doesnt want to use new sales area or new document pricing procedure or new customer pricing procedure,I know that in standard SAP it is not possible.
Can any of the gurus throw some light on this.Some work around is required here,So can u please say the required changes in Standard functionality.
Thanks & Regards
Narayana
Message was edited by:
manam narayana
Message was edited by:
manam narayana
Message was edited by:
manam narayanaHi Gurus.,
First of all thank you very much for giving me so tremendous response, But my client requirement is,
He has one customer and for that customer when raising an order ,for some orders Tax shouldnot caliculate and for some orders Tax should be caliculated,
For example : If he gives price 100,Then the base price should be 100,For some orders he gives price as 130 rs which is inclusive of tax like 110 should be the base price and 20 rs tax should get caliculated
So i have tried in the pricing procedures and we have standard pricing procedure RVAA01 & RVAB01 ,In which RVAB01 is the price inclusive of tax procedure,We can assighn different pricing procedures if any of the combination in OVKK is changed,But he dont want to change the combination in OVKK.
So client asks now when he raise an order he decides how the price should be caliculated, i.e the price may be he give price or price inclusive tax,of which the pricing procedure should automatically split the tax and price accordingly,He is asking in the way like when we raise a sales order we should do like a pop up box should appear asking which pricing procedure should be selected,So on selecting the pricing procedure the order should caliculate based on the selected pricing procedure
Thanks & Regards
Narayana -
Pricing procedure for the calculation of VAT
Dear all,
We require one new tax structure.
Assessable value + service tax & VAT for the sum of Assessable value + service tax.
Kindly give us the pricing procedure for the above requirement.
Regards
Mahalingam sarathi>
Mahalingam Sarathi wrote:
> Dear all,
>
> We require one new tax structure.
>
> Assessable value + service tax & VAT for the sum of Assessable value + service tax.
>
> Kindly give us the pricing procedure for the above requirement.
>
> Regards
>
> Mahalingam sarathi
Let me try to fit in this requirement for you (with a small demonstration, you will also have to use the appropriate accounting keys)
400 assessable value 350 390
410 JSRT Service tax 400
420 JEC3 ECEss on Srv tax 410
430 JSE3 Secess on SrvTax 410
440 ***. val + Srv Tax 400 430
450 JIVP VAT 440 -
Pricing procedure for Depot Sales(CIN Version)
HI,
Can anyone explain me TAXINJ and
The Pricing procedure for Depot Sales(CIN Version)
alongwith the Condition Types like JMOD,JECS,JECX etc.
Points will be given
Regrds,
BinayakHi Binayak.
JMOD is a FI Tax condition which gets the Basic Excise duty from calculation formula 352. JEX2 is a copy of JMOD and is a Sales pricing condition. The value of JEX2 gets posted for Excise account key. This ensures that the cost accounting of excise value paid is done correctly. In cases where commercial invoice is created after utilization the condition value formula 353 ensures that the actual MODVAT utilized is accounted as excise.
Similarly JAED is a FI Tax condition which gets the Additional Excise duty from calculation formula 352. JEXA is a copy of JAED and is a Sales pricing condition. The accounting is done for the value of JEXA.
JSED is a FI Tax condition which gets the Special Excise duty from calculation formula 352. JEXS is a copy of JSED and is a Sales pricing condition. The accounting is done for the value of JEXS.
JCES is a FI Tax condition which gets the CESS from calculation formula 352. JCED is a copy of JCES and is a Sales pricing condition. The accounting is done for the value of JCED.
So, Conclusion :---->
JMOD -- > Basic Excise duty condition for FI side.
corresponding to it,
JEX2 is the Basic Excise duty condition for SD side.
That's why
account key to JMOD is linkes in TAXINJ.
and
account key to JEX2 is linkes in JDEPOT.
Hope this certainly helps you.
Please reward points if found useful to you.
Let me know if you have any other doubt.
Regards,
Gaurav Raghav. -
Maintain CIN configuration & Pricing Procedure for Trading Company
Hi Experts,
Our client is a Trading Company. In this company...first they purchase finish goods and than sale it. They are not selling their material to the manufactures. They are not creating the excise invoice.
Please suggest us how to maintain CIN configuration & maintain Pricing Procedure for them.
Thanks in advance.
Regards,
ShatrughanHi,
Create 2 tax codes in T-code FTXP
1 for VAT, 2nd for CST
then you define 2 condition types in v/06,
ex:ZVAT,ZCST
place these 2 condition types in your pricing procedure in V/08
And in VK11 maintaine condition records.
Thank you, -
Pricing Procedure for Imported Material purchased from local vendor
Dear SAP Experts,
I have a scenario, where the Imported material is purchased from a local vendor.
The local vendor passes on all the customs duty, CVD and all the related duties to the customer (us).
All the duties including CVD in the form of Excise duty etc. have to be inventorized.
How to map this in SAP?
Thanks In Advance.
Regards,
Muthuraman.KHI,
I have given the pricing procedure for TAXINN
100 0 BASB Base Amount 362
110 0 Calculated Call 100
120 0 Sub total
250 0 JSRT Service tax set off 100 VS7
251 0 JEC3 A/P Ecs for Serv tax 250 VS8
253 0 JES3 A/P SE cess serv tax 250 VSE
258 0 Total Sevice Tax 250 253
260 0 JSVD IN:Service tax debit 250 ESE
560 0 JMOP IN: BED setoff % 120 X VS1
561 0 JMOQ IN: BED setoff Qty 120 JI2
564 0 JSOP IN: SED setoff % 120 VS1
565 0 JSOQ IN: SED setoff Qty 120 JI2
570 0 JMIP IN: BED inventory % 120 X
571 0 JMIQ IN: BED inventory Qt 120 NVV
574 0 JSIP IN SED inventory % 120 NVV
575 0 JSIQ IN SED inventory Qty 120
578 0 JMX1 IN: A/P BED setoff 560 561
580 0 JSX1 IN: A/P SED setoff 564 565
581 0 JMX2 IN: A/P BED inventor 570 571
583 0 JSX2 IN: A/P SED inventor 574 575
584 0 Total excise duty setoff 578 580
585 0 Total excise duty Inventory 581 583
586 0 Total Excise Duty W/O ECess 584 585
587 0 JECP A/P Ecess set off % 584 VS2
588 0 JECI ECS inventory % 585 NVV
589 0 JSEP IN:A/P SEcess setoff 584 JI6
590 0 JSEI IN:A/P SEcess inv 585
591 0 Price 120 120
600 0 JAOQ IN: AED setoff Qty 120 VS2
601 0 JAOP IN: AED setoff % 120 VS2
605 0 JAIQ IN AED inventory Qty 120 NVV
606 0 JAIP IN AED inventory % 120 NVV
U have to setup ur taxprocedure like this.In this the acct key is the main.IN OBCN ucreate the acct key & give them as non cenvatable.Then assign this acct key against the condition type in the TAXIIN.
Then in FV11 create the condition records for the cond type.For the cond type the access sequence should be JTAX -
Hi Gurus
Please help me regarding the Pricing procedure for MM.
How can i go and what are the steps. how they work.
PraneshHi,
Please follow the procedure
In MM module, pricing procedure is used during RFQ and PO creation. Total value of material based on all addition and subtraction like discount, surcharge, tax, freight, etc. In this we are defining pricing procedure and linking to vendor and purchase department through the virtual schemas.
Following steps for pricing procedure as,
1. Define conditions.
2. Define pricing procedure.
3. Define virtual purchase organization and vendor.
4. Info Record.
Customization for Pricing Procedure :
1. Definition of Conditions :
/NMEK0-condition typeu2026condition types- definition (define for basic price, net price, discount, surcharge, tax etc.)
2. Defining pricing procedure :
/NMEK0- calculation schema-calculation schemasu2014New entries (Define procedure and put the conditions like formula so that final price will be net price / total value as per company requirement)
3. Linking pricing procedure to independent condition types.
/NMEK0-condition typeu2026condition types- definition for position for defined conditions (Enter the defined pricing procedure in the each independent conditions u201CPricing Procedureu201D box)
4. Defining Schema group for Vendor :
/NMEK0- calculation schema-schema groupsu2014vendoru2014New Entries.
5. Defining Schema group for Purchase Organization--- New entries.
/NMEK0- calculation schema- schema groups---- purchasing organization--- new entries.
6. Linking Virtual Purchase Organization to actual Purchase Organization.
/NMEK0- calculation schema- schema groups----- Assign P.Org. (in actual P.Org, enter virtual P.Org)
7. Linking Pricing procedure to virtual P.Org and virtual vendor :
/NMEK0- calculation schema- Determine Schema--- -Standard --- New entries (Enter virtual schema and P.Org. along with pricing procedure)
8. Linking virtual vendor to actual vendor-- /NXK02 then enter schema group vendor in Purchasing Data )
9. Info Records (/NME11)---- click on u201CPurch. Org. data1u201D and enter condition types and pricing procedure
Activities in Materials Management
Activity Transaction
General overview of conditions MEKA
Create conditions MEK1
Change conditions MEK2
Display conditions MEK3
Thanks & Regards
Anilkumar Dalai -
Dear Experts,
I want the pricing procedure for UK country. My client had started new operations in UK.. currently he dont know wat all taxes and prices will be there in UK so anyone plzz suggest me wat all i must have to be configured in Pri pro , kindly do the needful.
Regards
abhiHi,
Basic Price in USD
Exchange rate for vendor
Vendor invoice
Freight
Insurance
Add: LC/Forward cover charges
Exchange rate for customs
Assessable value
Customs Duty @ 5 % on Assessable Value
Counter Vailing Duty @ 8 %
Education cess @ 2%
Total Duty
Education Cess on total duty @ 3%
SAD
Total Duties
Wharfage
Throughput charges
CHA Expenses
SGS Survey Quantity
SGS Survey Quality
Safety Surveyor
Demurrage charges
Duties on Demurrage charges
Administraiton charges
Stamp Duty
Customs Overtime/Bonding charges
Shifting Charges
Micellaneous
Out Harbour HPC Charges
Total Port
Freight
Hope it helps
Uts
Award if helpfull -
Hi Experts
The client requirement is to calculate Education Cess. Now we have same account key for in the pricing procedure for Tax and education cess so now everything is posting to same GL.
Now client wants to post Tax and education cesss separate GLu2019s can you please help me to change the Tax Pricing Procedure?
Requirement is like this
Tax %ge 10.3
10% Tax GL
2% ED Cess
1% Higher Edcess
HelpHi,
Can you specify if you are looking for postings from MM or postings from SD?
In any case I believe you would need new condition type in you tax procedure and have a new account key if you need to post to separate GL`s. You can setup the new account keys to GL mapping through OB40.
Hope this helps.
Regards,
SGP -
New Condition Table in Tax Pricing Procedure
Hi Friends,
Have u ever created new table for TAX Pricing Procedure and assigned the same to acess sequence.
We are using TAXINN.
Scenario is given below:
We receive material directly & some times we asked 1st vendor to send the material to another vendor without receiving into our factory. 1st case it will be cenvatable & in 2nd case it is non cenvatable (2nd vendor who receives material will claim)
Presently we are using condition table of Plant / vendor / Material. To meet above requirement we want to make a table with Plant / Material / Vendor / Storage location combination.
We maintain "Storage location" in filed catalogue VOK0 & then maintain in KOMPAZ appendix structure, so that it update KOMP & KOMK tables accordingly. When we are creating new table with storage location, we are getting error i.e. "storage location" field is not updated in KOMP & KOMK tables.
Can any one guide me how to proceed ? Is there any other method for solving this ?
Regards,
Sai Krishna46C: You should do it the other way around: first update structure KOMPAZ with field LGORT, then add it to the field catalog in VOK0.
You will then need to code these exits:
USEREXIT_PRICING_PREPARE_TKOMP and/or USEREXIT_PRICING_PREPARE_TKOMK to fill in the storage location field. If you add new fields to the catalog, you need to supply the values as well. The userexits are available in MV45AFZZ. -
Pricing procedure for order with reference from order
Dear Friends,
If I create a sales order with reference to another sales order of different type, the pricing procedure is copied too.
But I would to use another pricing procedure for second document
I found the oss note 14136 but this is for reference from invoce
I tried to create new data transfer routine for orders in copy from 51, but does not work
Can you help me??
thanks
best regards
GdA> If I create a sales order with reference to another sales order of different type, the pricing procedure is copied too. But I would to use another pricing procedure for second document,
Based on my understanding of query.
You are looking for a different pricing procedure in second doc.
For instance, the PricProc for SalesDoc1 is ZPR001 and the PricProc for SalesDoc2 is ZPR002, in addition to that, you want SalesDoc1 to become reference doc for SalesDoc2.
For this, ZPR002 & ZPR001 should have common base price condition type and rest pricing can change.
And for maintaining different Pricing Procedure with similar combination of sales area for SalesDoc1 & SalesDoc2, maintain different document pricing procedure for both docs and maintain Pricing procedure accordingly..
Thanks & Regards
J Prakash
Maybe you are looking for
-
When prompted to choose a destination folder for files that I am saving, I have found that 7.0 doesn't always open the file browser with the last folder I saved to. In previous versions, if I saved a jpg to a specific folder, it would open still dire
-
If I publish an iWeb website to .Mac, can I later build on the website in iWeb and publish the revised website to another server?
-
Revision: 12786 Revision: 12786 Author: [email protected] Date: 2009-12-10 07:35:43 -0800 (Thu, 10 Dec 2009) Log Message: Fixed bug with state property value assignments. SetProperty pseudonym values (width/explicitWidth, height/explicitHeight)
-
Flash Player 11 Fails Download
I have Windows 7, IE 10 and/or Firefox 22. Can't get flashplayer 11 to download via either web browser. I was able to download (manually) the player, and it shows as installed in my control panel but IE does not recognize that it's installed. I nee
-
iwork with mysql what the error ????????????????? iImpossible de créer un objet du type java.sql.Blob à partir du type oracle.jbo.domain.BlobDomain avec la valeur ÿØÿàJFIFÿþ*ÿâICC_PROFILElcmsmntrRGB XYZ Ü)9acspAPPLöÖÓ-lcms descü^cprt\wtpthbkpt|rXYZ�g