Tax (VAT) on Purchase Order

Hi Gurus,
Please send step by step instructions of setting up VAT calculation on Purchase Order. Your help will be highly appreciated.
Regards,
Kennedy.

Hi,
though I have not tried the set up of VAT yet, the below link would be of a help for you.
http://help.sap.com/bp_bblibrary/500/documentation/U40_BB_ConfigGuide_EN_IN.doc
Pravin

Similar Messages

Tables for VAT or CST and RATE OF TAX for a PURCHASE ORDER

i am developing a report(abap ALV)
i need to display the VAT or CST and RATE OF TAX for a PURCHASE ORDER that has been posted .
which tables to refer?

hi kumar gaurav
Check KONV table..
based on Condition TYpe you can get...
Regards
Deva

How Create new Tax code in Purchase order

Dear Sir,
I have creat new tax code in Purchase order
Basic value          3976876.53
Ex Duty          10%     397687.6525
edu.cess          2%     7953.75305
s&h Edu.cess     1%     3976.876525
Toatal               4386494.81
CST          1%     43864.94807
Addition                12550.00
i have all ready tax code 1021+5vat

Hi Sneha Patel
Case1:
If tax is applicable on the freight charges then create a Z condition in (Tocde M/06) and assign it in ur pricing procedure (Tocde M/08) before the net value is calculated in ur pricing procedure so that it is taken for tax calculation.
Case2:
If tax is not applicable on the freight charges then create a Z condition in (Tocde M/06) and assign it in ur pricing procedure (Tocde M/08) after the net value is calculated in ur pricing procedure so that it is not taken for tax calculation.
For both the conditions select
Cond. class   A Discount or surcharge
Calculat.type B Fixed amount
Cond.category B Delivery costs
Also mark as a header or item condition with accruals checked.
If u are not sure then copy FRA1 condition in STD and change Calculat.type as B Fixed amount instead of % in FRA1 so that u can enter the amount directly in PO.
Also mark these conditions as manual in ur pricing procedure so that these can be entered manuall in PO if reqd.
While creating PO u can select the reqd condition (with or without tax) under conditions tab and enter the amount.
hope it clears ur issue
Chk and revert
Reg
Raja

Output Tax Code In Purchase Order

Hi all,
It's possible to assign an output tax code to a purchase order?
The system gives me the error message 6164 'Please enter an input tax code, not an output tax code' when I use an output tax . Is there any customization to allow output taxes in purchase orders?
Thank you,
RS

Dear friend...
You cannot use output tax code in purchase order, since output tax codes are used only for sales. If you use output tax code in the PO it will obviously throw the error you said. If you want to have the taxes as shown in the output taxes, if not present in your input tax codes, you can create new tax code which you desire. Output codes are only for the Sales Order.
Hope it helps re-ward if so
Suraj

How to create VAT tax condition in Purchase order

Hi Experts,
My client has a requirement to put VAT (Value added tax) as condition in the PO. There shall be two different condition one for VAT deductable and the other for VAT non deductable.
The VAT deductable should have its impact at the time of MIRO as recoverable condition type.
So please kindly explain how to address this senario for VAT deductable. The client do not have CIN implemented.
Regards,
MG

Hi Moharghosh,
Go to - Spro->Financial Accounting (New)->Financial Accounting Global Settings (New)->Tax on Sales/Purchases->Basic Settings->Check Calculation Procedure->Define Condition Types
here define two condition types for VAT Deductible and VAT Non deductible.
Then assign both the above created condition types in you tax procedure as per the calculation.
Please make sure that you assign the exact transaction event key under Account Key field in Tax Procedure against VAT Dedu. and VAT non Dedu..
For VAT Non Deductible - You can use NVV.
For VAT Deductible you can create your own transaction event key in the below path - Spro->Financial Accounting (New)->Financial Accounting Global Settings (New)->Tax on Sales/Purchases->Basic Settings->Check and Change Settings for Tax Processing
Hope this will help you.
Thanks and Regards,
Neeraj

BAPI for updating tax code for purchase order..

Hi friends,
I have one requirement to change tax code for multiple Purchase order but the
thing is they should not go for release.So what should I prefer BDC or BAPI.
I am thinking to implement it through BAPI, but I don't know what procedure to follow.
If somebody can provide me a small guiding steps or code then it will be very helpful for me..
Thnaks in advance..
Useful answers will be rewarded with points....
Regards,
Rajesh Akarte

Hi Friend,
BAPI_ACC_PURCHASE_ORDER_CHECK Accounting: Check Purchase Order
BAPI_ACC_PURCHASE_ORDER_POST Accounting: Post Purchase Order
MEWP BAPIs Purchase order
BAPI_PO_CREATE Create Purchase Order
BAPI_PO_GETDETAIL Display Purchase Order Details
BAPI_PO_GETITEMS List Purchase Order Items
BAPI_PO_GETITEMSREL List Purchase Orders for Release (Approval): New as of 4.0A
BAPI_PO_GETRELINFO Display Detailed Release (Approval) Information on Purchase Order
BAPI_PO_GET_LIST List Purchase Orders - Only up to 4.0A
BAPI_PROCOPERATION_GETCATALOGS Determine Valid Catalogs as Value Help
BAPI_PROCOPERATION_GETINFO Analysis of Objects to be Generated in Purchasing
AND
Use condition type NAVS with access sequence 0003 to default the taxcode in the purchase order item using conditions. Materials Management -> Purchasing -> Purchasing order processing ->define screen layout at document level. Search for the transaction ME21.Double click on ME21. Then search for TaxCode
Use condition type NAVS with access sequence 0003 to default the taxcode in the purchase order item using conditions.
A2: Go to IMG.
Materials Management -> Purchasing -> Purchasing order processing ->define screen layout at document level.
Search for the transaction ME21.Double click on ME21. Then search for TaxCode. It is advisable to configure also the info record. The tax code should be a required entry, and whatever you specify here will be the default value in the Purchase order.
Materials Management -> Purchasing -> Purchasing info record -> define screen layout.
When you get here you search for the transaction ME12 ,double click here; search for Input VAT indicator.
Regards ,
Kumar.

VAT in Purchase Order

Hi
I want information about VAT taken in Purchase Order
How do i get report for this VAT.

Dear expert
you can use below t codes
RFKRSUM,
se38 : RFUMSV00
J1I2,
S_ALR_87012400
S_AL0_96000542
S_ALR_87012357
Menu path - Accounting -> Financial Accounting -> General Ledger ->Reporting -> Tax Reports
Regards
Ajeesh.s

Invoice non deductible tax amount vs Purchase order

In the purchase order the tax amount is calculated item by item (ME21N). In the invoice (MIRO) when we select flag Calculate tax the system calculates the tax amount for the total of all the items. Because of this system behaviour in the invoice verification sometimes we obtain small differences.
These differences should not exist specially when we are using a non deductible tax that affects the material valuation with the goods receipt and has to be corrected in the moment of the invoice verification.
Why does the system have a different behaviour from the purchase order to the invoice?
What can be done?
Best regards

Dear Biju K
Whatever you mentioned about condition NAVS is there in system.
I am not adding tax code in PO, referring your earlier email I am asking that.
For adding other element I have not asked anything here, only to clarify your statement
You need to cross check why non-deductible tax amount needed in your PO with NAVS condition type and its purpose.
I explained this.
My question is simple that in one PO I am getting non-deductible tax but if I change vendor for the same material I am not getting non-deductible tax in condition tab ? I am not able to understand why its happened ? If one PO shows means there are chances that basic configuration is correct but may be somewhere something is wrong, I want to find out that. If you can throw some light on that its helpful for me.
regards
Nitin

Automatic Calculation of Input Tax in a Purchase Order

Hi SAP Gurus!
Good day! Please help with my problem. During my creation of a Purchase Order, I will have to indicate what Tax Code to use. In this case, I use "Input Tax 12%". On the Item Condition TAB, the calculation of the input tax is not reflected. How can I customize this, in order for us to see the breakdown of Taxes automatically?
Thank you.
Mik

Hi Mik,
If you maintain the tax codes in the system for your company code then the tax codes will be picked automatically in PO through FTXP and the same is reflected in PO.In Invoice tab you have to give tax code, then in Condition tab, the values will be calculated as per the condition values maintained for the tax code.No need to maintain any thing in pricing procedure.
If your tax procedure in TAXINN, you have to maintain the condition records for the condition types ( JMOP, JEC1, JSEP etc..), then only the values can be shown in PO in Condition tab.In TAXINN, the tax code has to be assigned to the company code.
Regards,
Gangadhar Y

Transfer of tax indicator to purchase order for service items in shopping cart

Hi all.
I have a problem with the tax indicator in the shopping carts and in the backend purchase orders for service items. If I create a shopping cart with service items with different tax indicators, the backend purchase order have a unique item including all the services. So, all the PO items are under one tax indicator while in the shopping cart there is more than one indicator. I mean, the PO is not correctly replicated with the information of the SC.
Example: shopping cart in SRM with 3 items, tax codes: V1, V2, V1. The standard code transfers the information to the backend, and creates a purchase order with an unique item with the 3 services under tax code V1. So, the second service is not under the correct tax code, and will be wrongly invoiced.
We have debugged all the code of the process, and we think it is a standard bug. When you replicate a PO in the backend from a SC in SRM, have you experienced this behaviour, or the service items are grouped in different PO items each one with the correct tax indicator?
Thanks in advance.

Hi again...
I forgot to mention that we have found and applied the note 1822107 (Purchase order: wrong tax code for PO with 2 service items), that fits exactly to our problem. But after testing, it doesn't work.
Regards.

Reg:Tax Table In Purchase Order

Hi All,
     In the Purchase Order Line Item Level We will Give Tax I.e In the Invoice tab We have our required tax codes the the taxes button will enable when we click taxes all the taxes will come my question is coils anybody say in which table all the tax details for a Purchase Order is Stored? i have checked the table KONV
only the Header Conditions is Stored in that table.could you please help me?

Hi Vijetasap,
   i have tried that function module it doesn't return the values thats y i asked the table name, i have attached the code for my reference just correct me where am wrong?
LOOP AT I_EKPO.
    clear taxcom.
    CLEAR : I_KOMV.
    REFRESH : I_KOMV.
    SELECT SINGLE *
       INTO t001
       FROM t001
      WHERE bukrs = ekko-bukrs .
    taxcom-bukrs = i_ekpo-bukrs.
    taxcom-budat = ekko-bedat.
    taxcom-waers = ekko-waers.
    taxcom-kposn = i_ekpo-ebelp.
    taxcom-mwskz = i_ekpo-mwskz.
    taxcom-txjcd = i_ekpo-txjcd.
    taxcom-shkzg = 'H'.
    taxcom-xmwst = 'X'.
      IF I_EKPO-MTART = 'HAWA'.
        taxcom-wrbtr = i_ekpo-kzwi6.
      ELSEIF I_EKPO-MTART = 'ROH'.
        taxcom-wrbtr = i_ekpo-kzwi4.
      ENDIF.
    ELSE.
      taxcom-wrbtr = i_ekpo-zwert.
    ENDIF.
    taxcom-lifnr = ekko-lifnr.
    taxcom-land1 = ekko-lands.
    taxcom-ekorg = ekko-ekorg.
    taxcom-hwaer = t001-waers.
    taxcom-llief = ekko-llief.
    taxcom-bldat = ekko-bedat.
    taxcom-matnr = i_ekpo-ematn.
    taxcom-werks = i_ekpo-werks.
    taxcom-bwtar = i_ekpo-bwtar.
    taxcom-matkl = i_ekpo-matkl.
    taxcom-meins = i_ekpo-meins.
    taxcom-ebeln = i_ekpo-ebeln.
    taxcom-ebelp = i_ekpo-ebelp.
    IF ekko-bstyp EQ bstyp-best.
      taxcom-mglme = i_ekpo-menge.
    ELSE.
      IF ekko-bstyp EQ bstyp-kont AND i_ekpo-abmng GT 0.
        taxcom-mglme = i_ekpo-abmng.
      ELSE.
        taxcom-mglme = i_ekpo-ktmng.
      ENDIF.
    ENDIF.
    IF taxcom-mglme EQ 0.
      taxcom-mglme = 1000.
    ENDIF.
    taxcom-mtart = i_ekpo-mtart.
    IF NOT TAXCOM-mwskz IS INITIAL.
      CALL FUNCTION 'CALCULATE_TAX_ITEM'
      EXPORTING
ANZAHLUNG                 = ' '
   DIALOG                    = ' '
   DISPLAY_ONLY              = ' '
   INKLUSIVE                 = ' '
   I_ANWTYP                  = ' '
   I_DMBTR                   = '0'
   I_MWSTS                   = '0'
          I_TAXCOM                  = taxcom
   PRUEFEN                   = ' '
   RESET                     = ' '
      IMPORTING
   E_NAVFW                   =
          E_TAXCOM                   = taxcom
   E_XSTVR                   =
   NAV_ANTEIL                =
      TABLES
          T_XKOMV                    = i_komv
      EXCEPTIONS
             MWSKZ_NOT_DEFINED          = 1
            MWSKZ_NOT_FOUND             = 2
            MWSKZ_NOT_VALID             = 3
              STEUERBETRAG_FALSCH       = 4
              COUNTRY_NOT_FOUND         = 5
             OTHERS                     = 6
.Note: Am not given Full Code but this is the part where am getting the tax values.

Tax Issue in Purchase order

Hi,
I have created one Purchase Order- PO 45000306.
Tax Code I9 with Jurisdiction LA07900000 has a tax rate of 9%
But when we did invoice verification for the PO it brings up $0 as the tax.
What is the reason? How can i fix this?
Please help me.
Thanks
Supriya

Hi
In PO, which Tax code u enter in Invoice Tab field if u enter I0 , then system pick up the I0 tax rate check out
if any case at the time of invoice receipt system pick up $0 tax code , u can change mannual there enter I0
if any query revert back
Regards
Roobal

Reg. Calculated tax values in Purchase order

Dear All
I have to print tax percentage and value applicable in Purchase order. In po, at item level by clicking invoice view tax code appear as 3C besides button named TAXES. on clicking TAXES different value of tax and excise with percentage appears. all these appears thru komv structure. i want to print these vales.
by click Where used Structure KOMV there appears many object /classes. but i dont know how to use these. kindly provide me solution to fetch these values.
thanks/regards
Manjit

Create Tax code in FTXP
Let us SAy A1 --Note : for purchasing it should be input tax only
Then in FV11 Create condition record with plant material and vendor combination with cond type as JVRD
Maintain the TAx rate as 4 % or whatever is applicable
also enter the Tax code as A1 which u have created for ur tax procedure TAXINN
SAve it
Create a PO for the same material,vendor and plant combination
and enter the Tax code as A1
I think with the above details ur tax should get calculated
regards
shailesh

Table for tax fields in Purchase order

HI
I want to know in which table the taxes will go and store in purchase order .
In purchase order invoice tab there is Tax code field will be there say for example it is M1 . and if i click on the taxes adjacent to that i will get a new page or table where all the taxes is maintained for that particular M1 . Now i want to know in which table that will be stored
Regards
N.M.Pradeep kumar

HI
use
KONV
KONP
KOMV
T007*
Excise Duty - Table J_1IMATEXP ,J_1IMTCHID
for Tax - Table BSET
Tax table
regards
kunal
award if helpful

Validation of Tax Codes in Purchase Order

Dear All,
We have different tax codes like v0, v1, v2 maintained in system and we have projects(WBS) like Project1, Project2 etc.
The scenario is such that if i am trying to create an account assigned purchase order for a project with account assignement as Project1, system should allow only tax code v1. System should not allow other tax codes for project1.
Can we have tax code validation with respect to projects during PO creation.
Request, please provide steps that are required to mainatined to achive the above.
regards,
Suresh

Hi Suresh,
You can use SMOD enhancement MM06E005 component EXIT_SAPMM06E_012. This user exit is designed for checking custom data on the purchase order header, but can also be used for checking the standard PO data.
Some of the tables passed to the user exit are TEKPO and TEKKN, all items of the purchasing document and all account assignments, so you can compare the tax code with the project and produce an error message if the combination is incorrect.
Regards,
Monika

Tax (VAT) on Purchase Order

Similar Messages

Maybe you are looking for