TAXINN pricing procedures.

Hi Gurus,
What are the Standard pricing procedures for TAXINN.
regards,
jyothi.

Dear Jyothi
Please go thru this link
[Configuration of Tax Calculation Procedure TAXINN |http://help.sap.com/saphelp_erp2005vp/helpdata/en/9e/0b941b0fd64873bc54e8745fb044e7/content.htm]
thanks
G. Lakshmipathi

Similar Messages

  • Faced problem in TAXINN pricing procedure

    Dear Experts,
    In my company there is a TAXINN MM pricing procedur. But at the time of excise calculation, system is showing calculation as
    A - Excise Duty - 10% on Basic
    B-  Add Duty - 4%
    C- 10% +4%
    D- 2% Education Cess on C
    E - 1% HEcess on C
    *Then TOTAL Excise Duty - CDE *
    But  as per Finance Dept. Additional duty should be calculated on total excise duty i. e Excise 10% + 2% Ecess + 1%HEcess = Total excise Duty + Basic
    Now i have copied this TAXINN as TAXINT & done the required changes & assigned the same in IN->TAXINT where TAXINN is assinged.  But system is not picking the same.
    Could anybody help me in this?
    Thanks
    Trupti

    Hi Trupti,
    Pl let me know which condition type you are using
    Case 1) hope you are using JADC Additional duty 4 % in import scenarion if it is the case then in M/08 pricing procedure you can control it in from & to in odere to calculate Addtional Excise duties
    case 2) if you are using condition type JAOP which is nothing but Additional; excise duties which will flow from Tax procedure ( OBQ3) here you can check the calcution from & to in order to get the calculation of Additional excise duties here also you can apply the same logic. Hope with this logic you can able to resolve the issue.
    Regards

  • TaxINN & Pricing

    Dear All,
    I have a scenario
    There is a component that is purchase for Basic price of pattern = 19530   Rs (X)
    For this there is also pattern value                                                  = 93        Rs (Y)
    Total value                                                                                = 19623  Rs
    On 19623 Edu Duty10% + 2% Ecs + 1% SHECs Should be calculated .But During VAT Calculation shod be calculated excluding 93 Rs (Y Shown above) that is on 19530 + Excise Duties Components.
    How can I  map this in SAP Taxinn & Pricing Procedure.Please explain

    you can try whether the following works
    have condition for basic price ( step 1 )
    and discount / surcharge ( step 10 )
    have another condtion wich take the value of step 10 but as negative and 6 in sub tot.
    pl post a reply if it works or you could manage in any other way

  • TAXINN pricing condition missing

    Hi friends
    I am doing the TAX INN configuration
    Following standard tax conditions are missing for TAXINN pricing procedure
    JECP u2013 ECS SETOFFP - ECS Set off Percentage.
    JEX1 u2013 ECS SETOFFT - ECS Set off Total.
    JECI u2013 ECS INVENTP - ECS Inventory Percentage.
    JEX2 u2013 ECSINVENTT - ECS Inventory Total
    JSEP - IN A/P SEcess setoff
    JSEI - IN A/P SEcess Inventory
    JSRT    A/P Service Tax
    JEC3    A/P ECS for ST
    can any body help me in configuring TAXINN

    Hi Prabhat,
    it seems there are some changes to be done in your TAXINN.
    Please go through the SAP notes 1032265, 1044509.
    these are two master notes realted to HE Cess changes in budget 07-08.
    regards,
    Adwait Bachuwar

  • Excise Pricing procedure for Stock Transport Order in MM  with TAXINN

    I am an SD guy running STO  from manufacturing plant to sales depot
    AND not able to create JEX proforma excise invoice from NL
    to TEST my configuration, I created excise invoice in J1IS with respect to goods issue from NL from UB  means configuration is ok
    BUT base amount in J1IS is coming as zero because of missing excise conditions in MM  STO pricing procedure
    CAN anybody give me a sample EXCISE pricing procedure for STO
    AND  do i need to create records for the condition types in FV11 OR  MEK1 please clarify
    I know that calculation type 362 attached to BASB in TAXINN has something to do with this
    I am able to see chapter ID in J1IS
    And the relation between condition types in TAXINN and excise pricing procedure for STO
    And I am able to create excise invoice in J1IG with zero excise values
    I also maintained pricing procedure determination for JEX in OVKK that is document pricing procedure N pricing procedure JINSTOCK
    I think my explanation is sufficient enough
    please give A sample of TAXINN

    Hi Yoga,
    Here u not need to do VL10b.just follow this steps and try.
    In PO,Document type is UB and Item Category is U.
    After creating PO,In MB!B with reference that PO number and using movt type 541
    then u can see that stock in Transit.Now u do GR with respect to PO number.
    Thanks & Regards
    Suresh.
    > Hello MM Gurus,
    >
    > I am doing Stock transport order between 2 plants
    > under same company code.
    > I have maintained all the required settings.Following
    > is the process flow.
    >
    > 1.Creation of Purchase order with document type
    > UB.(ME21N)
    > 2.Creation of outbound delivery with respect to
    > Purchase order.(VL10B)
    > 3.Post Goods Issue from the supplying plant. (VL02N)
    > 4.Creation of Excise Invoice in supplying plant.
    > (J1IS)
    > 5.Goods receipt at the receiving plant.(MIGO)
    >
    > While I am doing Goods receipt in the receiving
    > plant, system is giving an error
    > message "Maintain Vendor for the Excise Invoice" -
    > Message no. 4F185.
    > Why this message is coming and how to resolve this?
    >
    > Thanks & Regards
    > Yoga

  • How to copy total freight value from pricing procedure to TAXINN procedure

    Dear Experts,
    I want to copy the total freight value from pricing procedure to TAXINN procedure , i think i have to use SUBROUTINE for that but can you guide me what is the routine number and in which coloum i i have to use e.g. requirement, or ALt CAl Typ, or cond Base value ???
    e.g.
    freight condition type (QTY , freight) will enter manually e.g. 100 Rs and material qty 4 so total freight is 400 Rs this value (400 Rs) i want to copy from Pricing procedure to TAXINN
    How can achieve this ????
    Thanks and regards
    Hanumant Nimbalkar

    Hello,
    If you want to calculate VAT above Freight, then in Pricing procedure make the Sub total as blank for Freight confition types.
    And in Tax procedure, make the condition base value as 363 for VAT condition type.
    Make the tax code for 4 % VAT and u'll get the desired result.
    This will solve ur purpose.
    Regards
    Prabhjot Singh Nayyar

  • Service tax condition types in Pricing Procedure in SD(Taxinn)

    I need one more advice on Service tax.
    I am configuring order type for services.In that in pricing I have to add the service tax conditions type for service tax & cess on that.We do not have any standard condition type in our pricing procedure for services.
    Is there any standard SAP doc. to configure service tax condition types in pricing procedure or I have to copy from JLST & JLSR(surcharge).What about the account keys I will used for these condition types.
    If you have any doc. related to this issue please send it to me....or suggest me what to do.
    Please remeber I am using TaxINN tax procedure.
    Please help me
    Thanks & Regards
    Sunil Garg

    PROCEDURE: Initial Steps
    Create two new Tax conditions: JSE4, JES4. Steps for creation of Tax Condition is illustrated below
    Create new condition types
    SAP Standard IMG -> Financial Accounting -> Financial Accounting Global Settings -> Tax on Sales/Purchases -> Basic Settings -> Check Calculation Procedure. (Transaction OBYZ)
    Select ‘Define Condition Types’
    Select Condition Type JIN1 and Click on Copy as (F6) and give the Condition type as JSE4 and the Name as “Service Tax”.
    Select Condition Type JIN5 and Click on Copy as (F6) and give the Condition type as JES4 and the Name as “ECS on Service Tax”.
    Outcome: The two tax conditions, one for Service Tax and the second for Education Cess on Service Tax have now been created.
    1.     Create a new tax posting key VS9 and VS0. 
    The path for this is:
    SPRO  Financial Accounting  Financial Accounting Global Settings  Tax on Sales/Purchases  Basic Settings  Check and Change Settings for Tax Processing
    Select the Processing Key MW1 and Click on Copy as (F6) and give the Key as VS9 and Name as ‘India Service Tax’.
    Select the Processing Key MW1 and Click on Copy as (F6) and give the Key as VS0 and Name as ‘ECS on Service Tax’.
    Note: If there are multiple service tax registration numbers, you need to have separate account posting to different GL accounts based on service registration number. This can be done provided a separate tax code is maintained for each service registration number.
    To achieve this you need to define a set of 2 separate G/L accounts for service tax and Education CESS on service tax respectively, for every service registration number.
    In such a case, please activate multiple accounts posting per tax code as follows:
    Defining the GL accounts for the Service tax and ECS on Service Tax:
    SPRO  Financial Accounting  Financial Accounting Global Settings  Tax on Sales/Purchases  Posting -> Define Tax accounts
    Go to Details of the Transaction VS9 (Service Tax GL account)  and enter the Chart of accounts…
    Select the Tax Code Check Box if you want to have Tax Code Specific GL accounts or Blank when the common GL accounts…
    Regards,
    Rajesh Banka
    Reward points if helpful.

  • Taxinn  and Pricing procedure

    Dear MM Experts,
                          I am working on ECC 6.0 and decided to implement taxinn procedure. I have made both procedures and it is working for service tax is ok. But It is not working with VAT/CST taxes.
    It is highly appreciable If any one provide step by step procedure for settings (both Taxinn and MM Pricing procedure) Please send to [email protected]
    My TAXinn  reqmt incl taxes CST or VAT or Service tax+ Edcess+ H Ed Cess
    Regards,

    Hi 
    for Pricing peocedure
    http://www.sap-img.com/materials/steps-for-mm-pricing-procedures.htm
    http://www.sap-img.com/sap-sd/creating-new-pricing-procedure.htm
    http://www.sap-basis-abap.com/sapsdlog.htm
    For VAT
    help.sap.com/bp_bblibrary/500/documentation/U40_BB_ConfigGuide_EN_IN.doc
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/dd/ab17adedc9438fb548a8d86efbb187/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/93/75663ca0a9272ae10000000a11405a/frameset.htm
    nagesh

  • Excise values from taxinn to pricing procedure

    we are using taxinn.  We are getting values of all ed related condition types in tax-tabview of PO, from condition recordds. We have created similar condition types in pricing procedure also.  These condition types in pricing procedure are without access sequence.
    Our requirement is that, when a user creates a PO, values of taxes should be automatically copied from invoice tab to pricing condition tab in PO.  How to configure this?  Do we need to use any routine for this?
    Please suggest

    Hi Biswajith,
    We have gone live about 3 years back.  The excise conditions have been given in pricing procedure for getting printout in PO.
    Presently  users are entering these conditions manually in PO.  I know that by making some changes to print programmes, this can be done otherwise.  But we do not want to do any changes to print programme and want to pull these values from invoice tab-view only.
    Can u suggest any solution?
    Please do not suggest me to do changes to print programme.

  • Pricing procedure in TAXINN

    Dear SAP Gurus,
    Please guide me on following.
    I am configuring Domestic and Export pricing procedure on TAXINN ( Sales and Distribution ).
    1. For domestic pricing procedure as required I have maintained all excise conditions in it  and excise invoice getting generated correctly  through J1IIN but problem is that my excise register updation transaction doesn't show  updated entries in RG23.
    2. For export pricing procedure  do we really need to include all the excise conditions as a statistical one?????.
    In SAP standard JINEXP doesn't include Excise conditions .
    So  please suggest me whether to include or not Excise conditions in export pricing procedure.
    If answer is NO then how exice will be determined for export and how it will deducted from the export bond defined in the system.
    Help from you ..will great support for me
    Regards,
    Vijay

    Hi Vijay,
    Answers to your question.
    1. J1IIN transaction is for creating excise invoice for factory sales (removal from factory) in this case RG23 register will not update. Only RG1 registy entry will be updated.
    2. For export you can configure with or with out excise conditions, but to calculate duties in the excise invoice you have to maintain your price condition category as H Base Price for PR00. and you have to maintain the condition record for JEXP in the condition table 357.
    If you need any further clarification you can revert....
    Reward points if you are satisfied........
    Regards,
    Upendra

  • Pricing procedure+TAXINN

    Pl. give me configuration documents on Pricing +TAXINN procedure.
    E mail [email protected]
    Thanks
    Vaibhav

    In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenario's. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself.
    Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better):
    Country Version India comes with four pricing procedures as follows:
    1. JINFAC (Sales from manufacturing plants)
    2. JINEXP (Export sales)
    3. JINDEP (Sales from depots)
    4. JINSTK (Stock transfers
    CIN:
    IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
    Maintain Excise Registrations
    Use
    In this IMG activity, you maintain the data relating to your excise registrations.
    Enter each of your excise registrations, specifying a four-character code for each Excise Registration IDs
    In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
    Activities
    For each excise registration in your business create a registration ID, and state:
    1. Which taxes the registration covers (additional excise duty, special excise duty, and cess)Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
    2. The maximum number of items to be printed on each excise invoice
    3. Whether you are allowed partial CENVAT credits
    Maintain Registration ID NUMBER, Excise code number, excise registration number
    Excise Registration Number
    A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
    Every entity with an excise registration number is required to keep its own excise books.
    ECC Number
    Specifies the organization's ECC number.
    Excise Registration Number
    A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
    Every entity with an excise registration number is required to keep its own excise books.
    Excise range: Specifies the excise range in whose area the excise registration is located.
    Excise Division
    Specifies the excise division in whose area the excise registration is located.
    Excise Collectorate
    The code of the excise collectorate in whose area the excise registration is located.
    Indicator for confirming AED usage
    Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
    Example
    Additional Excise duty is leviable in case of textile products, tobacco and sugar.
    Similarly for SED CESS
    Number of Items in Excise Invoice
    Shows the maximum number of line items that the authorities allow per excise invoice.
    This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
    This information is used to split the transfer postings' items into multiple subcontracting challans.
    Excise register set description
    Description of the excise registers set.
    Partial CENVAT Credit
    Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
    Dependencies
    When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
    This information is also shown when you post the vendor's excise invoice.
    Maintain Company Code Settings
    Use
    In this IMG activity, you maintain the data relating to your company codes.
    Document Type for CENVAT Postings
    It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
    Indicator for providing debit account overwriting
    Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
    Automatic balance Indicator
    Excise year start month
    The calendar month marking the beginning of the excise year
    Use
    This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
    Excise invoice selection procedure
    Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
    Number of excise invoices to be selected
    Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
    Days to be considered for excise invoice selection
    Number of days from document date for excise invoice selection.
    Example
    If the value of this field is 20 and today is 28-03-97. The excise
    invoice selection will show the related invoices only for the
    period 08-03-97 to 28-03-97.
    Document type for TDS FI posting
    Financial accounting document type for TDS posting.
    Document type for FI posting on Utilisation
    Financial accounting document type for TDS posting.
    Indicator for item level excise duty round off
    This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
    Rounding off of Excise duty for outgoing excise invoice
    You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
    Immediate Credit on Capital Goods
    Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
    The rest is posted the CENVAT on hold account, for use in the following year.
    CVD Clearing Account
    Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
    Exchange rate type
    Key representing a type of exchange rate in the system.
    Use
    You enter the exchange rate type to store different exchange rates.
    Example
    You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
    Exchange rate type to be used for Export excise duty converts
    When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
    Maintain Plant Settings
    Use
    In this IMG activity, you maintain excise information relating to your plants.
    Plant Settings
    In this activity, you maintain excise information relating to your plants.
    Activities
    For each plant:
    1. Specify whether it is a manufacturing site or a depot.
    2. Assign it an excise registration ID.
    You can assign the same ID to more than one plant, if required.
    Depot
    Indicates that the plant in question is a depot.
    Dependencies
    Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
    Number of goods receipt per excise invoice.
    Multiple GR for one excise invoice, Single credit
    Multiple GR for one excise invoice, Multiple credit
    Maintain Excise Groups
    Use
    In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
    Excise Groups
    In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
    Recommendation
    Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
    If your company has only one set of excise registers, then you need to maintain only one excise group.
    Activities
    1. Create one excise group for each set of registers that you need to keep.
    1. Assign the excise groups to plants.
    2. Maintain whether this Excise group is for a depot or not.
    3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
    4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
    5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
    6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
    7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
    8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
    9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
    10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
    11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
    • Excise Group
    Governs which set of excise registers a business transaction will be included in.
    Following is the relation between excise group, plant and registration.
    Dependencies
    In define excise groups in Customizing.
    Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
    At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
    Indicates that the plant in question is a depot.
    Dependencies
    Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
    GR Per Excise Invoice
    Multiple GR for one excise invoice , Multiple credit
    Multiple GR for one excise invoice , Single Credit
    Create Excise Invoice Automatically
    Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
    The excise invoice is created in the background.
    If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
    RG23D Sales Creation and posting option
    RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
    If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
    If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
    Default excise qty in GR
    If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
    Folio number for depo
    Posting
    If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
    Also we can set indicator for creation of part 1 for:
    Blocked stock
    Stock transport order
    Consignment stock
    Maintain Series Groups
    Use
    In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
    Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
    Activities
    1. Define excise series groups based on type of outgoing document
    2. Assign series group to excise registration ID
    3. If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
    4. If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
    Example
    You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
    No account postings for CENVAT in sales cycle
    No utilization Flag
    If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
    IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
    Immediate Utilization of CENVAT
    Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
    If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
    Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
    Maintain Excise Duty Indicators
    Use
    In this IMG activity, you maintain the excise duty indicators.
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
    Select Tax Calculation Procedure
    In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
    1. If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
    2. If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
    This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
    We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
    Maintain Excise Defaults
    Use
    In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
    Activities
    If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
    If you use formula-based excise determination, fill out all of the fields as follows:
    1. Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
    2. Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
    3. Specify the conditions in the sales order that are used for excise rates.
    4. Specify the countervailing duty condition type used for import purchase orders.
    See also
    SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
    Condition-Based Excise Determination
    Use
    When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
    Features
    The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
    Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
    When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
    Activities
    Customizing
    Make the settings in Customizing Basic? India?for Logistics - General, by choosing Taxes on Goods Movements Account? Excise Duties Using Condition Technique and ...?Settings Determination.
    These activities include one activity where you define a tax code for condition-based excise determination.
    Master Data
    Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
    Day-to-Day Activities
    When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
    When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
    Creating Condition Records for Excise Duty
    1. In the command field, enter FV11 and choose .
    2. Enter the condition type that you want to create a condition record for and choose .
    The Key Combination dialog box appears.
    3. Select the combination of objects that you want to create the condition record for.
    On the dialog box, Control Code means "chapter ID."
    So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
    4. Choose .
    5. Enter data as required.
    In the Tax Code field, enter the dummy tax code that you have defined.
    6. Save the condition record.
    Formula-Based Excise Determination
    Use
    When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
    Prerequisites
    In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data?access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.?
    You maintain the following types of data:
    1. Plant master data
    You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
    See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
    2. Vendor master data
    For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type - for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
    For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
    3. Customer master data
    Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
    Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
    4. Material master data
    Each material is assigned a chapter ID.
    5. Excise tax rate
    For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
    If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
    Activities
    Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
    1. Looks up the customer master data to see what status you have assigned the customer.
    Let's assume you've assigned the customer status 3.
    2. Looks up the plant master data to see what status you have assigned the plant.
    Similarly, your plant has status 2.
    3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
    4. The system determines the chapter ID of the ball bearing for the plant.
    Let's assume the chapter ID at plant for the ball bearings is 1000.01.
    5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
    Define Tax Code for Purchasing Documents
    In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
    Only carry out this activity if you use condition-based excise determination.
    Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
    Assign Tax Code to Company Codes
    Use
    In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
    Only carry out this activity if you use condition-based excise determination.
    Classify Condition Types
    In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
    The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
    In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
    1. For taxes on purchases, use the condition types contained in the tax procedure.
    2. For taxes on sales, use the condition types contained in the pricing procedures.
    Standard settings
    The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
    Use these settings as a basis for your own.
    IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
    Define G/L Accounts for Taxes
    In this IMG activity, you specify which G/L accounts you will use to record which taxes. You have set up G/L accounts for each of the processing keys listed below.
    Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
    1. VS1 (basic excise duty)
    2. VS2 (additional excise duty)
    3. VS3 (special excise duty)
    4. VS5 (sales tax setoff)
    5. MWS (central sales tax)
    6. MW3 (local sales tax)
    7. ESA (service tax)
    8. ESE (service tax expense)
    Specify Excise Accounts per Excise Transaction
    In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
    If you use subtransaction types, enter the accounts for each subtransaction type as well.
    Activities
    Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
    The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
    Example
    Excise TT DC ind Account name
    GRPO CR CENVAT clearing account
    GRPO CR RG 23 BED account
    GRPO DR CENVAT on hld account
    Specify G/L Accounts per Excise Transaction
    In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
    When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
    1. Excise group
    2. Company code
    3. Chart of accounts
    Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
    Requirements
    You have already:
    1. Defined the G/L accounts
    2. Defined the excise groups
    3. Maintained the transaction accounts
    Activities
    For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
    Note
    You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
    Config setting needed to be done in order to get the Excise Details Screen in Material Master.
    Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
    Following document helps you to do this configuration.
    ? Material Master ? Logistics General ?1. Go to IMG Define Structure of Data Screen for each?Configuring the Material master Screen Sequence.
    2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
    3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is "Foreign Trade: Import Data". Select the same and click on Subscreens in the left frame.
    4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
    5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 - 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
    6. Save the setting.
    7. Create a Material Master and check whether in Screen Foreign Trade - Import, Excise related subscreen appears.
    Reward points if helpful,
    Rewards,
    Archit

  • Excise duty in the Pricing Procedure for Local Purchase / Importation

    Hi,
    I'd like to know how to set up the pricing procedure for the purchase of an IS Oil Material; for local purchase and importation, especially with regards to the excise duty posting.
    Local purchase:  the vendor will bill us inclusive of the ED tax he previously paid, so the tax is just passed on to us..  My receiving location has ED paid status. In the PO item, we need to see this price (inclusive of tax) in the net price field.
    Importation:  the vendor only bills us the cost of the material.  When we received the fuel, we paid ED tax to local tax authorities.
    I know that both in these scenarios, the system has to determine the excise duty.
    My questions are (1) how do you set up the excise duty condition type  in the pricing procedure(or do they have to be maintained in the pricing procedure?) ?   and (2)  how do you set up this condition type in the config?
    Thank you and hoping for your immediate feedback.
    zccr

    Hi,
    You can use same pricing procedure
    put 4 in subtotal in pricing procedure against the Discounr or freight cond
    and in taxinn
    BASb ALTCBV 362 and for jmop 363
    But this will work only if same  discount or freight value is in IV as that given in PO
    if freing value changes in IV then its a problem
    This is SAP bug, and SAP workes in that way only, freight value should be same in PO and IV
    other solution
    in taxinn create tax code like v8 vat 4% for 003 tax clasification
    in ftxp create tax code V8 desc vat 4%
    in fv11 for jvrd put 4
    and at the time of IV put this tax code for freight amount
    and for regular material value V1 tax code
    this will work only if u have used acess seq MWST instead of JTAX pr JST1
    hope this helps
    Vipin

  • TAX Pricing  procedure

    Hello SAP  CIN GURUS ,
    Good  morning  to  All  .
    I am   going  to Implementation for  the next  month .I never  worked  on  Indian client .
    I need your  help for  the CIN  Tax  Procedure  .What Condition  Types  I  have   to  maintain  and  also  How  to  link  up  with M/08 pricing  Procedure  ..
    apart  of  the  configuration  I  have   completed
    Every  One  is saying We  have   to  define  according  to  client .
    Please   send  me  the  sample  CIN  pricing  procedure  .
    Br ,
    Vijay

    Hi,
       Go to OBQ3 and check the standard tax procedure TAXINN
    Regards,
    AKPT

  • Pricing Procedure vs Tax Procedure

    Dear all,
    The scenario is as follows
    My company purchase material from a trading company which imports the materials from other countries.
    In PO we have maintained import pricing procedure so that we can take the duties paid by trading company during import.
    We pay duties to the trading company.
    Taxes are also involved in this.
    I have created a pricing procedure for this seperate where there is a line with 'condition value' = total of
    [ Net price of materialCustoms dutyCVD+ECS on CVD + SEC ECS on CVD + AED]
    Now we all know tax should be calculated on this total amount.
    In normal case the Net price will come as the base price for tax calculation  which is here wrong.
    I want this total amount to be the base amount for tax calculation in tax procedure.
    What i need to assign in the pricing procedure against this 'total' so that  it is taken as base amount for tax calculation
    How to do this?
    sapmmlearner

    Hello,
    As per your said scenario:
    My company purchase material from a trading company which imports the materials from other countries.
    In PO we have maintained import pricing procedure so that we can take the duties paid by trading company during import.
    We pay duties to the trading company.
    Taxes are also involved in this.
    I have created a pricing procedure for this seperate where there is a line with 'condition value' = total of
    Net price of materialCustoms dutyCVD+ECS on CVD + SEC ECS on CVD + AED
    Now we all know tax should be calculated on this total amount.
    In normal case the Net price will come as the base price for tax calculation which is here wrong.
    I want this total amount to be the base amount for tax calculation in tax procedure.
    What i need to assign in the pricing procedure against this 'total' so that it is taken as base amount for tax calculation
    My question is if your company and your vendor /supplier (Is a trading company from where you are procuring the materials) are geographically located at the same place (such is within country in same place or within country at different places, etc)
    means, then you should not worry about the Import duty. Because for you, when you procure the goods it should be treated as Inland/Domestic procurement  (by the by your vendor, who is trading company procures materials from Abroad, that is his risk or his duty to pay the Customs duty or Importation clearing charges, etc since he is procuring from outside the country through Import procurement process, so don't worry for that).
    Hence when you order the material through standard PO to your vendor (that is trading company), then Logically it must be Domestic pricing procedure (there is no involvement of import duties, importation, etc), that means system will pickup the Pricing procedure - Domestic - which consists of Gross price, and all other suitable pricing elements which are in currently used in your company (for the vendor) and part from the tax condition elements such as Basic excise duty (BED), SED, AED, Cess, etc... these are not part of the Pricing proceudre, but relevent to the Tax procedure. So which can be arranged in a sequential order for the Tax procedure - TAXINN - which is currently in use from any industry - for calculating the tax amount for the item that you procure from the supplier or vendor. And thats how you (your company) will pay the Duty or tax amount agains the goods that are procured from external source.
    Please note:  the tax caluclation is always based on the Base amount, not on anything else, that is based on the total ordered amount through the PO. And the tax amount is always interm calculated by adopting the suitable tax code in the PO (in item details), provided you have to maintain all these tax condition elements in a Condition records through FV11 t.code. then once the tax code (i.e., Input tax - which is tax on purchases) is adopted for the PO, system will pick all the valid condition records and sum the total tax amount in the PO.
    Maintainaing of condition records is required, because the tax procedure which is a Condition based tax calculation procedure. hence you have to maintian the condition records as you said. Then it will calculate correctly.
    Hope it clarifies,
    Regards,
    Sapsrin

  • Pricing procedure and CIN master

    Hi MM Gurus,
         I need one simple procedure for creating Pricing Procedure.........and ......creating Excise details and relating  and can anybody show how the pricing procedure and excise (CIN) is related .
    Regards,
    Girish.C.M

    Hi,
    CIN Setting:
    Check Calculation Procedure
    In this activity, you can check and, if necessary, change existing procedures for tax calculation.
    Standard settings
    Calculation procedures containing the necessary specifications for the calculation and posting of taxes on sales/purchases have already been defined in the standard SAP system for certain countries. Every calculation procedure groups several tax types together into a condition type (for example, output tax or input tax) in the calculation procedure, and determines calculation rules for it.
    The calculation procedure determines for which amount the individual condition types are to be calculated. This can be the base amount (total of the expense items and the revenue items) or a subtotal. The entry in column FrmLvl, determines for which amount tax is calculated.
    Note
    In this activity, the condition types for the check and the possible change provided in the standard system are also displayed. Here, for example, the condition calculation rule, or for which base amount the tax is calculated is determined (= condition type).
    Recommendation
    If possible, do not change the condition types and calculation procedures provided in the standard system. Only check the standard condition types and calculation procedures regarding whether you can use them for your requirements. If necessary, make changes.
    Activities
    If you cannot use the standard settings, change the condition types and calculation procedures delivered to meet your requirements.
    Procedure (pricing, output control, acct. det., costing,...)
    Specifies the conditions that are allowed for a document and defines the sequence in which they are used.
    Example
    Procedures are used, for example, in the following applications:
    · Pricing in sales and distribution
    · Applying overhead in Product Costing (costing sheets) and for CO internal orders
    · Calculating accrued costs in Profitability Analysis
    · Output control (printed confirmations, EDI messages, electronic mail)
    · Account determination
    · Calculating taxes on sales/purchases
    · Calculating accruals in Cost Center Accounting
    · Pricing for resource planning
    Definition: condition type
    Controlling (CO)
    A distinction, in overhead calculation, is made between:
    · Base condition types, which determine the object for which the overhead is to be calculated
    · Overhead condition types, which define the percentage overhead to be applied
    In resource planning, a condition type determines the types of resource prices that are stored in the SAP System. These can be absolute or percentage values, for example.
    Real Estate Management (RE)
    An exact definition of a condition that specifies the amount paid for a specific service.
    Condition types include:
    · Basic rent
    · Advance payment for operating costs
    · Pest control
    Sales and Distribution (SD)
    A characteristic of a condition.
    For example, in pricing, different condition types are used to distinguish between a discount that refers to a net price and a discount that refers to a gross price.
    Treasury (TR)
    A characteristic of a condition used to classify financial transactions.
    Typical examples of condition types are interest, dividends, or full repayment upon maturity. The various parameters specified for the individual condition types determine how the flows are calculated in the cash flow.
    Return ->
    Definition: condition_type
    Condition type
    The condition type is used for different functions. In pricing, for example, the condition type lets you differentiate between different kinds of discount; in output determination, between different output types such as order confirmation or delivery note; in batch determination, between different strategy types.
    Access sequence
    With the access sequence you define
    · the condition tables used to access the condition records
    · the sequence of the condition tables
    · which field contents are the criteria for reading the tables
    Assign Country to Calculation Procedure
    In this activity, you enter the key for the calculation procedure which determines the conditions which are allowed per document and which defines the sequence of the conditions in the document for each country.
    Requirements
    Each calculation procedure which you enter must contain the necessary specifications for calculating and posting the taxes on sales/purchases. For more information on this, read the chapter "Create calculation procedure".
    Activities
    1. Assign a procedure for tax calculation to every country with which your company has business dealings.
    2. Make sure that the corresponding data for calculating taxes is stored for each calculation procedure which you enter here.
    Check and Change Settings for Tax Processing
    In this activity you make the necessary specifications for posting taxes. In doing this you specify under a process key the following indicators:
    · Tax type
    Output tax, input tax, additional taxes, or "not tax-relevant" can be specified as the tax type.
    · Nondeductibility of tax amounts
    For this, tax amounts are marked as not deductible.
    · Posting indicator
    Here you specify whether the tax amount is posted separately or distributed to expense or revenue items.
    · Tax not relevant to cash discount (Not discount relevant)
    This indicator is set only for Canada. If you select it, the system does not take into account the corresponding tax amount when determining the tax base.
    Standard settings
    Process keys with the most important characteristics for tax amounts have already been set in the standard SAP system.
    Recommendation
    Do not change the standard settings. Check whether you can use these process keys for your company, making changes only if necessary.
    Activities
    If you cannot use the standard settings, use new process keys and enter them in your calculation procedure. Do not change the standard SAP process keys.
    Note
    You must make enhancements to the standard settings if you want to specify a new account key in the "Create calculation procedure" activity. You must create and maintain this key beforehand in the "Settings for tax processing" activity.
    Internal processing key
    The internal processing keys are used by the system to determine accounts or posting keys for line items which are created automatically.
    The processing keys are defined in the system and cannot be changed by the user.
    Definition: posting key
    Financial Accounting (FI)
    A two-digit numerical key that determines the way line items are posted.
    This key determines several factors including the:
    · Account type
    · Type of posting (debit or credit)
    · Layout of entry screens
    Return ->
    Definition: posting_key
    Maintain Excise Registrations
    Use
    In this IMG activity, you maintain the data relating to your excise registrations.
    Activities
    Enter each of your excise registrations, specifying a four-character code for each.
    Definition: excise registration
    Financial Accounting (FI)
    An entity in India that is entitled by law to produce any goods liable to excise.
    Each entity is assigned its own excise registration number.
    Every factory that manufactures excisable goods is required to register separately, so that a business with seven factories requires seven registrations.
    Return ->
    Definition: excise registration
    Maintain Company Code Settings
    Use
    In this IMG activity, you maintain the data relating to your company codes.
    Maintain Plant Settings
    Use
    In this IMG activity, you maintain excise information relating to your plants.
    Maintain Excise Groups
    Use
    In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
    Definition: excise group
    Financial Accounting (FI)
    A unit within an excise registration, in India, which keeps its own set of excise records.
    Whereas the excise registration reports to the excise authorities, the excise group is a purely internal organizational unit. Each excise group keeps records of all transactions that have to be reported to the excise authorities. When the time comes to present these records to the authorities, the excise registration compiles the information from all of its excise groups.
    Return ->
    Definition: excise group
    Maintain Series Groups
    Use
    In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
    Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
    Activities
    · Define excise series groups based on type of outgoing document
    · Assign series group to excise registration ID
    · If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
    · If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
    Example
    You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
    Maintain Excise Duty Indicators
    Use
    In this IMG activity, you maintain the excise duty indicators.
    Maintain Postal Addresses
    Use
    In this IMG activity, you maintain the addresses of various customs and excise organizations that your company deals with.
    You use these addresses in the ARE Documents functions. When you create an ARE-1 or ARE-3, you enter the address of the excise department and the customs department involved in the export process. The system then prints their names and addresses on the AREs.
    You can then define a default local excise department for each excise group and a default customs department for each series group.
    Definition: ARE-1 document
    Logistics - General (LO)
    A form, in India, that companies have to fill out when they remove excisable goods from their manufacturing plants for export.
    The form exempts them from paying excise duty when they remove the goods from their premises.
    Return ->
    Definition: ARE-1 document
    Definition: ARE-3 document
    Logistics - General (LO)
    A form, in India, that allows companies to sell otherwise excisable goods from their premises without paying basic excise duty. The buyer of the goods must be in possession of a deemed export license.
    The ARE-3 states what goods are being removed and which deemed excise license covers it.
    Return ->
    Definition: ARE-3 document
    Maintain Subtransaction Type with Text
    Sub Transaction Type
    Sub transaction type is used for multiple purposes
    Subcontracting:
    It determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
    Excise removals
    Sub transaction type is also used for determining the accounts while doing excise removals.
    With in CIN the account determination is based on the transaction type. So normally you can have a single set of accounts for Excise utilization. In case you need alternate account determination for handling various scenarios you can define sub transaction types. The sub transaction types and corresponding account assignments needs to be maintained in CIN customization
    Select Tax Calculation Procedure
    Use
    In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
    · If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
    · If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
    This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
    We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
    Definition: condition-based excise determination
    Logistics - General (LO
    A method that the system uses of determining excise duty in India.
    This method requires you to create condition records for each combination of vendor or customer and material (and possibly other conditions).
    When you create a purchasing document, the system calls the tax procedure assigned to India. The tax procedure finds all of the condition records that you have created for that combination of vendor and material.
    When you create a sales document, the excise duties and sales taxes are determined by the pricing procedure (not the tax procedure).
    Return ->
    Definition: condition-based excise determination
    Definition: formula-based excise determination
    Logistics - General (LO)
    A method that the system uses of determining excise duty in India.
    This method was used in the Country Version India Add-On and requires you to maintain additional data in the Excise Rate Maintenance transaction, J1ID.
    When you create a purchasing document, the system calls the tax procedure assigned to India. Each of the excise duties in the tax procedure has its own condition types, and each condition type is assigned to a formula. This formula instructs the system to calculate the excise duty using the data that you have maintained in the Excise Rate Maintenance transaction.
    When you create a sales document, the system determines the excise duties and sales taxes using the pricing procedure (not the tax procedure).
    Return ->
    Definition: formula-based excise determination
    Maintain Excise Defaults
    Use
    In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
    Activities
    If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
    If you use formula-based excise determination, fill out all of the fields as follows:
    · Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
    · Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
    · Specify the conditions in the sales order that are used for excise rates.
    · Specify the countervailing duty condition type used for import purchase orders.
    See also
    SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
    Definition: basic excise duty
    Financial Accounting (FI)
    The main type of excise duty in India.
    It is levied on a wide range of products, for example, foodstuffs, metals, jewellery, leather goods, and machinery.
    Return ->
    Definition: basic excise duty
    Definition: additional excise duty
    Financial Accounting (FI)
    A form of excise duty, in India, levied on a select range of products, for the most part, textiles.
    Return ->
    Definition: additional excise duty
    Definition: special excise duty
    Financial Accounting (FI)
    A form of excise duty in India on a limited number of goods, mostly luxury goods, including pan masala, sparkling waters, furs, and yachts.
    Return ->
    Definition: special excise duty
    Definition: cess
    Financial Accounting (FI)
    In India, a tax on the manufacture of certain products, mostly foodstuffs.
    Return ->
    Definition: cess
    Definition: countervailing duty
    Financial Accounting (FI)
    A form of excise duty imposed on imports that are subsidized by the country in which they were manufactured.
    Countervailing duty (also known as CVD) is intended to make the imports more expensive, thereby redressing any competitive advantage they might have over goods produced locally.
    Return ->
    Definition: countervailing duty
    Define Tax Code for Purchasing Documents
    Use
    In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
    Only carry out this activity if you use condition-based excise determination.
    Activities
    Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
    See also
    SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Deter
    Sales Tax Code
    The tax code represents a tax category which must be taken into consideration when making a tax return to the tax authorities.
    Tax codes are unique per country. The tax rate calculation rules and further features are stored in a table for each tax code.
    Procedure
    For tax-exempt or non-taxable transactions, you should use tax codes with a 0 percentage rate if the corresponding transactions are to be displayed in the tax returns.
    Note
    You must define new tax codes if tax rates are changed by the state. The old codes with the old tax rates must remain in the system until no more open items which use this tax code exist.
    Definition: tax code
    Financial Accounting (FI)
    A two-digit code that represents the specifications used for calculating and displaying tax.
    Examples of the specifications defined under the tax code are:
    · Tax rate
    · Type of tax (input tax or output tax)
    · Calculation method (percentage included or percentage separate)
    Return ->
    Definition: tax_code
    Definition: tax rate
    Financial Accounting (FI)
    The percentage rate used to calculate the tax amount.
    Return ->
    Definition: tax_rate
    Assign Tax Code to Company Codes
    Use
    In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
    Only carry out this activity if you use condition-based excise determination.
    See also
    SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination
    Classify Condition Types
    Use
    In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
    The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
    In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
    · For taxes on purchases, use the condition types contained in the tax procedure.
    · For taxes on sales, use the condition types contained in the pricing procedures.
    Standard settings
    The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
    Use these settings as a basis for your own.
    Maintain Chapter IDs
    Use
    In this IMG activity, you maintain the chapter IDs and the corresponding descriptions as per the schedules published by the Central Board of Excise and Customs.
    Definition: chapter ID
    Logistics - General (LO)
    The number given to a material in the schedules of materials published by the government of India.
    The schedule lists all materials involved in manufacturing, input materials and output materials alike. It shows how much excise duty is levied on each material.
    Each material in the schedule is assigned its own identification code, called "chapter ID."
    Example
    The schedule contains an entry for ceramic roofing tiles, which are liable to basic excise duty at 16%. The chapter ID associated with these tiles is 6903.10.
    Return ->
    Definition: chapter ID
    Assign Users to Material Master Screen Sequence for Excise D
    Use
    In this IMG activity, you customize the material master data so that it shows the information relating to excise duty.
    Standard settings
    Country Version India comes with a screen sequence (IN) that shows the excise duty fields. You have to assign it to each of your users.
    Activities
    1. Double-click User Screen Reference.
    2. Assign all users who need to see the excise duty information to the screen reference IN.
    Example
    Name Screen Reference
    MISHRA IN
    Screen Sequence Number
    Alphanumeric key identifying the screen sequence. The screen sequence defines the sequence of information units in the material master dialog. A screen sequence is made up of data screens. For information on the screen sequences defined in the standard R/3 system, see the IMG documentation Configuring the Material Master.
    Note
    When creating a screen sequence, use an alphanumeric key beginning with the letter Y or Z (customer name range). This key cannot subsequently be changed.
    Dependencies
    You can assign screen sequences to users in the IMG activity Assign Screen Sequences to Users/Material Types/Transactions/Industry Sectors.
    Screen reference depending on the user
    Grouping of users that determines what screens are displayed in accordance with the user master record when you maintain material master records. It also determines the order in which the screens appear.
    Definition: user master record
    User and Authorization Management (BC-SEC-USR)
    Record that contains important master data for a user in the SAP System.
    The user master record contains the assignment of one or more roles to the user. This is how a user menu and the corresponding authorizations for the activities contained in the user menu are assigned to the user. Only users who have a user master record can log on to the system.
    Return ->
    Definition: user_master_record
    Define Form Types
    Use
    In this IMG activity, you define which form types you want to record in the system. You can only use form tracking for the form types that you enter here.
    Example
    · Form type: CT3
    · Form description: Concessional tax form
    · Status: Receive
    Define G/L Accounts for Taxes
    Use
    In this IMG activity, you specify which G/L accounts you will use to record which taxes.
    Requirements
    You have set up G/L accounts for each of the processing keys listed below.
    Activities
    Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
    · VS1 (basic excise duty)
    · VS2 (additional excise duty)
    · VS3 (special excise duty)
    · VS5 (sales tax setoff)
    · MWS (central sales tax)
    · MW3 (local sales tax)
    · ESA (service tax)
    · ESE (service tax expense)
    Specify Excise Accounts per Excise Transaction
    Use
    In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
    If you use subtransaction types, enter the accounts for each subtransaction type as well.
    Activities
    Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
    The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
    Example
    Excise TT DC ind Account name
    GRPO CR CENVAT clearing account
    GRPO CR RG 23 BED account
    GRPO DR CENVAT on hold account
    Specify G/L Accounts per Excise Transaction
    Use
    In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
    When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
    · Excise group
    · Company code
    · Chart of accounts
    Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
    Requirements
    You have already:
    · Defined the G/L accounts
    · Defined the excise groups
    · Maintained the transaction accounts
    Activities
    For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
    Note
    You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
    Define Processing Modes Per Transaction
    Use
    In this IMG activity, you specify which processing modes the user can use in the various Incoming Excise Invoice transactions.
    This way, you can tailor the transaction to what your users have to do.
    Standard settings
    The system comes with three standard transactions relating to the Incoming Excise Invoices function (those that are included in the role SAP_CIN). The processing modes available in these transactions are as follows:
    · J1IEX_C
    This transaction is for excise clerks: users of this transaction can only capture and display excise invoices.
    · J1IEX_P
    This transaction is for excise supervisors: they can change, display, cancel, and post excise invoices.
    · J1IEX
    In this transaction, users can capture and post excise invoices, as well as displaying, changing, and canceling them.
    Activities
    If the standard settings meet your requirements, do not do anything.
    Otherwise, you can adjust the standard settings or you can create your own transactions. To do so:
    1. In Maintain Transaction, create a new transaction by making a copy of one of the standard transactions. Give the new transaction a transaction code of your choice.
    2. In this activity, enter data as follows:
    o Tcode: The transaction code that you have just created.
    o Proc. mode: Specify what the users of the transaction will do with the excise invoices.
    o Active: Select this indicator to activate the setting.
    Example
    You might want to create a transaction that only allows users to display excise invoices.
    Define Reference Documents Per Transaction
    Use
    In this IMG activity, you specify for each combination of transaction and processing mode which reference documents you want the users to be able to use.
    Activities
    If the standard settings meet your requirements, you do not have to do anything.
    Otherwise, add the entries that you need to the table: For each transaction, make one entry per combination of processing mode and reference document. Activate each entry for it to work.
    Definition: excise invoice reference document
    Logistics - General (LO)
    A document, in India, that you refer to when you enter an incoming excise invoice.
    If you have already posted the goods receipt, you can use the goods receipt document as the reference document. Otherwise, you can use the purchase order (or another purchasing document, such as a be a contract or a scheduling agreement).
    Example
    In the SAP System, you create a purchase order for 100 bags of sand and send the order to your vendor. Two weeks later, the vendor delivers the sand, accompanied by an excise invoice.
    When you enter the excise invoice in the system, you specify the number of the original purchase order: this is the reference document.
    Return ->
    Definition: excise invoice reference document
    Maintain Rejection Codes
    Use
    In this IMG activity, you define the rejection codes that are used in the Incoming Excise Invoices transaction.
    Activities
    For each rejection code, enter a code and a description. You can also specify whether the excise duty in the invoice is to be posted to the CENVAT on hold account, instead of the CENVAT clearing account.
    Specify Which Movement Types Involve Excise InvoicesUse
    In this IMG activity, you specify which movement types relating to goods receipts involve excise invoices.
    The system uses this information during the goods receipt procedure. When you post a goods receipt using one of the moevement types that you have specified here, the system prompts you to enter the excise invoice number.
    Note
    This option cannot be used for processing goods receipts without purchase orders.
    Maintain Default Excise Groups and Series Groups
    Use
    In this IMG activity, you specify which excise group and series group you want to appear in these fields by default. You can make separate settings for different combinations of sales organization, distribution channel, division, and shipping point.
    Activities
    This activity is optional, unless you want the system to automatically create outgoing excise invoices when you create a customer invoice.
    In this case, you must also make the appropriate setting in Customizing for Excise Duty, by choosing Basic Subcontracting Attributes
    Use
    The subcontracting attributes help determine conditions for a combination of an excise group, a transaction type, and a subtransaction type.
    The conditions such as the number of excise items per subcontracting challan, if the nonexciseable materials have to be filtered or not when the subcontracting challan is created, the movement type groups for issues and receipts and the hierarchy of determining the excise base value are mentioned here.
    Requirements
    Before you continue with this activity, work through the following activities:
    · Materials Management -> Inventory Management and Physical Inventory -> Goods Issue / Transfer Postings -> Define Screen Layout.
    For the movement type 541, maintain the field Purchase Order as an optional entry or as a required entry.
    · Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Maintain OutputTypes.
    Maintain the output type. On the Default Values tab, maintain the dispatch time and the transmission medium. Maintain the print parameter on the Print tab. This output type has to be maintained in this activity here.
    · Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Assign Forms andPrograms.
    Maintain the Program, FORM routine, and the form for the output type.
    · Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Printer Determination -> Printer Determination by Plant / Storage Location.
    Enter the output device that you use.
    Settings -> Maintain Excise Groups, and selecting Create EI (Create Excise Invoice Automatically).
    Maintain Movement Type Groups
    Use
    In this IMG activity, you group movement types together to form movement type groups.
    Definition: movement type
    Inventory Management (MM-IM)
    A classification key indicating the type of material movement (for example, goods receipt, goods issue, physical stock transfer).
    The movement type enables the system to find predefined posting rules determining how the accounts of the financial accounting system (stock and consumption accounts) are to be posted and how the stock fields in the material master record are to be updated.
    Return ->
    Definition: movement type
    Utilization Determination
    Use
    In this IMG activity, you specify which CENVAT accounts are to be debited by the Fortnight Utilization of CENVAT report: When the report calculates how much excise duty you must remit, it automatically proposes which CENVAT accounts the duty should be debited to. Here, you specify those defaults.
    You can either:
    · Debit all the excise duty to one account
    · Debit the excise duty to more than one account, in which case you specify which percentage is to be debited to each account
    Example
    If you want 50% of basic excise duty (BED) to be debited to the RG 23A account and the remaining 50% to the RG 23C account, you would make the following settings:
    Acct name BED perc.
    RG 23A BED account 50
    RG 23C BED account 50
    Alternatively, to debit all of the BED to the RG 23A account, and then RG 23C account, if there is not enough in the RG 23A account, you would make the following settings:
    Acct name BED perc. +
    RG 23A BED account X
    RG 23C BED account X
    When you come to run the report, the system takes the RG 23A account because it is the first one you have entered. If this account does not cover the BED, the system takes the RG 23C account instead.
    Maintain Minimum Balances for Excise Accounts
    Use
    In this IMG activity, you can maintain minimum balances in your excise accounts. When the balance in these accounts during utilization falls below this level, the system automatically utilizes funds in the PLA account.
    Activities
    Maintain the minimum balance amount for the excise accounts. If you have more than one excise group, you can maintain different minimum balances.
    Specify SAPscript Forms
    Use
    In this IMG activity, for each of your company codes, you specify which SAPscript forms the system prints the excise registers with.
    Standard settings
    Country Version India includes a number of sample SAPscript forms and printing programs, which you can use as follows:
    Reg. name Lay. no. Form Tcode/Prog
    RG 23A Part I 1 J_2IRG23A_PART1 J_2IRAP1
    RG 23C Part I 1 J_2IRG23C_PART1 J_2IRCP1
    RG 23A Part II 1 J_2IRG23A_PART2 J_2IRAP2
    RG 23C Part II 1 J_2IRG23C_PART2 J_2IRCP2
    PLA 1 J_2I_PLA J_2IPLA
    RG 23 D 1 J_2I_RG23D J_2IRG23
    RG 1 1 J_2I_RG1 J_2IRRG1
    RT 12 1 J_2I_RT12_ABSTRA J_2IRT12
    RT 12 1 J_2I_RT12_ABSTRA J_2IRT12
    RT 12 1 J_2I_RT12_3 J_2IRT12
    The layout description can be left blank or an appropriate description maybe filled in. You may not change the register name. You can have your own layouts and maintain the name here. If the output device and number of copies are maintained it is automatically picked up for printing.
    Number Ranges
    You can maintain the number ranges for all CIN Number range objects using this transaction
    Activities
    Please maintain the number ranges for the folllowing objects The no nr has to be '01' for all
    1. j_1iintnum
    At an Excise group
    1. j_1irg23a1
    2. j_1irg23a2
    3. j_1iRG1
    4. j_1irg23c1
    5. j_1irg23c2
    6. j_1ipla2
    7. j_1iintpr2
    8. j_1irg23d
    9. j_1irg1_t ( material level)
    10. j_1iconpla ( if Consolidated PLA is used )
    At Series group
    1. j_1iexcloc
    2. j_1iexcexp
    3. j_1idepinv
    4. j_1i57Fc ( 57F Challans )
    Rewards if Helpful
    regards
    rb

Maybe you are looking for

  • Mod-BIOS 790FX-GD70 (MS-7577)

    Mod-BIOS for 790FX-GD70 (MS-7577) Do at your own risk! based on the Beta-BIOS 1.9b2: - update JMicron Option-ROM to v1.07.14 - remove Realtek PXE-ROM v2.26 - add gPXE-ROM v0.9.9 - change AMD AHCI-ROM to v3.0.1540.59 - replace OEM Logo with Svet{BK}'s

  • Can't sync music on new iPhone 4

    I have a new iPhone. I cannot sync my music which I have in iTunes for my iPod Touch. Each line has an exclamation point in front which means tune can't be "located." Everything else syncs fine. How do I get the tunes "located" so I can sync them? Th

  • Printing problems with CP1515n and CM1312

    I can see from the forum that a lot of people are having problems with printing. My HP CP1515n wouldn't print properly with my new iMAC. Through a lot of complaining to PC World and to Apple we got a resolve with PC world. However my HP CM1312 printe

  • How do I define a set of files as Trusted?

    I'm using InDesign CS5 to create an interactive pdf containing hundreds of hyperlinks to htm files. When its done, both the pdf and the linked files will be supplied on a CD. With CS3, I had to create the pdf in InDesign and then add the hyperlinks u

  • Problem in Inserting the Value in the column through Stored Procedure

    stored procedure is created and i need to insert data into the SALES_TRADEIN, from the parent table (Flatfile_sales),through COMMAND PROMPT. I have 2 details TradeIn_1 and TradeIn_2. I need to insert details of TradeIn_1 in SALES_TRADEIN TABLE if the