Taxonomy Attribute Link

Hi people!
I'm having a big problem with taxonomy attribute link, I will give you an example what is happening:
I have a taxonomy field in my Materials Main Table called PDM, the problem is when I update the field PDM changing the actual category to another, when I have attributes filled with values and i change to a new category, the attributes that have value filled is replicated/linked to the new category I chose.
For example my record was set to a Shirt category, that have the following attributes:
- Color
- Shirt Type
- Size
In this scenario just the attribute Shirt Type is filled with some value, the others is blank
When i change the category for example from Shirt to Pants that have the following attributes:
- Color
- Pants Type
- Size
When I change the category of this record to Pants MDM show me the following message:
"The following attributes SHIRT TYPE will be linked to the new value you are assigning to 'PDM' because they are linked to the old value od 'PDM' and contain data values"
MDM only allow me to save if i clink in OK if i don't click it doesnt save the record. If i click in OK button it save the record but it link the attribute to the new category a chose.
Someone knows how to change this?
If i change the category it just change to the new one without carry the attributes?
Please someone help me!
Thanks in advance!

Thanks Minaz for answering!
I noticed that the attributes wich are copied is just the attributes with there is some value selected. The solution when change the category is to clean the attributes values first, save the record and then change the category!
Thanks so much for answering!
Best Regards
Fabiano

Similar Messages

How to import taxonomy attribute links.

Hi frds,
Can any one guide me how can i import links to attributes of taxonomy. It would be great if any one explain in step by step?
Thanks alot,
Rajeev

If the external links are used in your site's pages, then Dreamweaver will pick them up automatically. Assets > URLs > Refresh Site List -- make sure you have a Dreamweaver site definition set up.
If not, create a page in GoLive, dump all the externals you need onto it, and save. Dreamweaver will then be able to pick them all up in the Assets panel.
John

Taxonomy Attribute Link Type

Hi,
Does anyone know what the functionality is for the field Link Type? It can be set to Master, Ordinary or Variant when taxonomy nodes are being linked to attributes.
thanks,
Morgan

Hi Morgan,
As per my understanding Link type Master, Variant and Ordinary will be used when we set up Matrix for Product Repository.
Please refer this below article step by step for more details to understand the use of Matrix.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9075aef0-2e4c-2b10-95b8-f9588b7213c1?quicklink=index&overridelayout=true
Refer Page 10/12 Data Manager: Taxonomy Mode where you can define the attributes as Master, Variant or Ordinary.
Regards,
Mandeep Saini

MDM Security for taxonomy attributes

Hi,
I have created a taxonomy and linked attributes to it in MDM 5.5 SP6. I do not want users to populate or change the attribute values in Data Manager after they have assigned a part to a taxonomy node. That will be done with xml via Import Server.
I see that I can set Change Tracking on Taxonomy[Attributes], but I don't see any way in the Roles - Functions/Tables and Fields or in the Configuration options in Data Manager to allow users to see the attributes and their values but not change the values.
thanks!
Morgan Hinkle

Hi Morgan,
Is there any way to allow them to set the taxonomy node per part, but not modify the associated attributes?
Yes, this is possible for a user in taxonomy mode of Data Manager.
Go to Console, Open Repository> Admin>Roles>Functions>Taxonomies-->Modify linked Attributes.
So you need to navigate up-to Modify Linked Attributes and Set Access as None. Set this role only to that particular user which is not allowed to Changed linked(associated) attributes with category in taxonomy mode. You can also set Add Attributes and Modify Attributes access to None for that user as per your requirement.
Note: This function is applicable, when that user select Category table as current table in Taxonomy mode of Data Manager. This is working fine at my end. But if you are talking about this taxonomy associated Attributes get not changed by User from Main table record for that specific user (I mean a record in main table is associated with a category where this category is linked with some attributes and you want no user can change these attribute values in main table), then as per my understanding this is not possible because as designed, every action done within a Taxonomy node (add, update, remove) is considered to be an update to the main record, thus it has only one entry in the Roles >>tables and Fields tab (which is the Taxonomy look-up field of the main table). I firmly believe that MDM does not support this functionality as of now.
Check for similar reply from SAP for Qualified table in below thread.
Data Manager Security on qualified table
Regards,
Mandeep Saini

Mandatory taxonomy attributes

Hi ,
How to make the taxonomy attributes mandatory apart from writing validations ? I have a requirement wherein not all the attributes for a class are mandatory .
Regards
Yogesh

Hello Yogesh
If we told about Data Manager(DM).
Unfortunately, you can't make attributes mandatory by another way.
In DM you see all attributes linked to selected taxonomy item.
You can't hide part of them, according you multistage business process.
But you can create validation for part of them as you need.
That will be combination from workflow, validation and assignment.
Use additional field where you will save current stage before
Validation will work depend of combination mandatory attributes and that field value.
Validation should have type "Error"
Assignment will launch(from WF) by the end of current stage and change old stage value to new.
Regards
Kanstantsin Chernichenka

Not able to open Modal Page through a report attribute link

Dear All,
Not able to open Modal Page through a report attribute link, kindly help me...
I am using skill builders modal page plugin ...
Thanks and Regards,
Madonna

Here's what you have to do.
You set up your column link like this:
Link text: whatever you like
Link attributes: onclick="return false;" class="open_modal"
Target: Page in this application
Page: number of the page you want to open in your modal window
You set up your dynamic action like this:
Event: Click
Selection type: jQuery selector
jQuery selector: .open_modal
(notice the dot at the beginning!)
Action: SkillBuilders Modal Page (2.0.0) [Plug-in]
Event Scope: Dynamic
And finally, in your True Action (SkillBuilders Modal Page (2.0.0)), URL Location should be set as Attribute of Triggering Element.
And that's pretty much all it takes.
Hope this helps.

Taxonomy Attributes - Can they accept free Text

HI Friends,
Our MDM Version: MDM 5.5, SP06, Patch 04.
We currently have Taxonomy Attributes sent from MDM to ECC Classification & Material Characteristics using CLFMAS02. Until now these characteristics had fixed values and this was fine as both MDM and ECC were accepting only fixed values.
Now the business wants to make the Classification Characteristics in ECC as free Text(No Drop Down). And this is do able in ECC. But MDM cannot allow Taxonomy Attrbutes to be Free Text . It has to have fixed set of values in MDM.
Please help me with input in the following areas:
1. Can we make the Taxonomy Attributes in MDM as FREE Texts.
2. If we cannnot make them as FREE Texts , what is the reason for it to have been designed so.
3. What should be the alternative approach i could use to have this scenario implemented in MDM.
Your inputs would be greatly appreciated.
Thanks,
Sh

Hi Alexander,
I have an excel interface used for Mass Creation of Materials. This will in addition have fields for the Taxonomy Characteristics which would accept free text and get mapped to the characteritics.
Unless the characteristic is a free text it will not work.
As I mentioned on the ECC side the free text for characteristics can be enabled. the challenge is MDM does not allow it so i dont think i can use the CLFMAS as is.
Any suggestions would be greatly appreciated.
Thanks,
Sh

Hiding "Descriptive Attributes" link on item page in PLM

Hi,
We have a requirement where we need to hide the "Descriptive Attribute" link on the item page (Self Service). Please note that this link is coming on the Sub-Tabs (side navigation on the left side of the page). Clicking on this results in a page where DFF is show. We need to hide this link so that it is no more available to the user. Please suggest is someone have achieved this functionality before.
Regards,
Nitin

Hi Pratap,
I have check the same thouroughly, but the link (which appears to be coming up from menu) in the side navigation bar is not coming up in the about this page. Also this is not coming as a part of the JDR_UTILS command. I believe it is the menu which is getting rendered on the page. I am able to locate the menu and function inside it. I also tried using Menu Exclusion functionality but thats also not causing any help (link is still visible). Please note that i got both the APACHE and OAF core services to clear the cache (This is R12 instance).
Please suggest.
Regards,
Nitin

Taxonomy attributes in assignments

I want write an assignment to fill in the long text with differnet fileds including the taxonomy sturctures and their attributes.
ex. my taxonomy structure
             field 1
               ........ field2
                     ..............field 3 -
A
B
C
             field 4
               ........ field5
                     ..............field 6 -
Z
X
C
Could anyone pls tell me on how to create this assignment,
Is it possible to inclue the taxonomy attributes and taxonomy hiercarcy subnodes ...... if yes how?
I tried using concatnate, but not able to see the where I can bring in the attribute values.
pls let me know ......... thanks.

Hi,
1.
In this new assignment created an expression "concat(category.dipsplayfiled, attribute1, attribute2). Still I am not able to
get any result in my LNG_TXT field. even the expression editor is not throwing any error.
You have to create one branch expression to each category value.
so when you are creating the branch expression you have to assign one category to branch value .
after that when you run assignment ,if category is assigned to that record and also there is branch assignment for that category then that value should be assigned to long text field.
so kindly check whether there is any value assigned to category field and there is branch assignemnt for that category value or not.
2.
Also when you say one assignment for each category value.................... I want to generate my LNG_TXT(300) for all my
records based on the taxonomy attributes + some other fields.
Note : some attributes will be present for some category values, and may have different for others.
so how will I be able to achieve this......pls explain
when you create branch assignment and set category value then when you go to assignment expression pop up then you can only see the attributes that assigned to that category value .
Thanks,
Sudhanshu

Setting up Custom Priorities for Taxonomy Attributes through Import Manager

Hi,
I want to set priority for "n" number of characteristics through Import Manager.
I know Import manager allows us to set priority to one of the following : "Highest" "High" "Normal" "Low" "Lowest". But I have a requirement to set custom priority for each of the attribute through Import manager so as to avoid manual intervention.
Has anybody worked on this before?
Regards,
Amol.

Hi,
Which special properties you are talking about ?
I will just brief you the concepts of Hierarchy and Taxonomy
Hierarchy
Node1
-    Node11
-   Node12
Node2
-    Node21
--         Node211
Only leaf nodes can be assigned at the time of record creation.
Taxonomy
Used when particular hierarchy nodes needs some extra fields.
Example: If your hierarchy is like
Cars
    - Fiat
    - Maruti
Bikes
    - Hero Honda
    - Bajaj
Now for Cars, i want to store its Price but for Bikes i am not interested in Price but I want the Colour info. Now if you create the Price and Colour as fields of the repository then for all the records whose category is Cars will have NULL value for Colour and reverse in case of Bikes. Hence the concept of Taxonomy is introduced so that you can assign the fields (known as attributes) to the Nodes of the hierarchy.
For Taxonomy Import, refer the below links
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30aa1447-80a1-2a10-e483-a76087bcb12f
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6090d0bd-1da7-2a10-468f-bdd17badb396
Regards,
Jitesh Talreja

MDM Taxonomy attribute values disappearing

Hello -
a problem has been encountered where some of the attributes of the taxonoy table disappear when two taxonomy fields in MDM main table lookup the same taxonomy table.
However, these attribue values still appear in the main table records, they just disappeared from
the "search parameter" area.
Has such a problem ever been encountered? If so - how has it been resolved?
Please let me know
Thank you in advance

Hi,
I don't know about any SAP note related to this problem, but you can just refer to Console reference guide and help.sap.com files, there you will find that we cant create a main table field of type taxonomy which refer to same taxonomy table. Its written "A product can belong to at most one leaf-node category." so that can be the reason we can use only one taxonomy table per main table field.
http://help.sap.com/saphelp_mdmgds55/helpdata/EN/8e/9f9c427055c66ae10000000a155106/frameset.htm
See this: Console Reference Guide--> Repository Maintenance -->Designing an MDM Repository -->Taxonomy Lookup Tables
BR,
Alok
Edited by: Alok Sharma on Mar 12, 2008 5:24 PM

Creating MultiValued Taxonomy Attributes using API

Hi All,
I'm trying to create an attribute in the taxonomy table that has text/multivalued type. I am able to create the attribute and set the type to text/multivalued, but I am not sure how to create the actual value set for it.
For example, a "Color" attribute would have a value set consisting of a list of possible colors, i.e. blue, green, yellow, etc...
In the AttributeInfo class, I see no methods to accomplish this.
Please let me know if you have any ideas!
Thanks!
Roman D.

Hi Roman,
Please have a look at the AttributeInfo.GetFeatures() method. This returns an instance of FeatureDomain which holds an array/collection of FeatureValue instances. In your case it will be empty and you must add the FeatureValue instances.
Hope this helps,
Richard

Updating value of for taxonomy attributes via ABAP API

Hi ,
We have table Product hierarchy repository in that we have Products table and ProductHierarchy table which is of type taxonomy .
The product hierarchy is assigned to each product as lookup taxonomy field.
Can anyone please let me know how we can update the values assgined to the attribute throght ABAP API.
Example we have the attribute called color which assigned to Product Hierarchy 'A' and this product hierarchy 'A' is attached to Material '111' and the attribute color will have value 'Blue' for material '111' now I want to update the value of color to 'Red' . How we can achieve this via the MDM ABAP API.
Regards,
Amar Kamat

If your question is how to change the value of an attribute for a specific product this is the solution:
Use IF_MDM_CORE_SERVICES->RETRIEVE( ) to retrieve the product record so that you have a populated structure of type MDM_PARAMETER. In this structure you will find the entry relating to the taxonomy field. The VALUE attribute of this line entry will be a reference to type MDM_TAXONOMY_ENTRY.
At this point you will want to take the TAXONOMY_ENTRY_ID and TAXONOMY_TABLE_CODE of this structure to retrieve the attributes. Using IF_MDM_CORE_SERVICE->RETRIEVE_ATTRIBUTES( ) and the attributes mentioned before you will get the results into a table of line type MDM_ATTRIBUTE_INFORMATION_SL.
Select the appropriate line from the result table based on the attribute name (ATTR_NAME). In the record of type MDM_ATTRIBUTE_INFORMATION_SL you will now want to select the appropriate line from the table found in field ATTR_FEATURE_DOMAIN. Find the appropriate attribute (in this case color) by VALUE_NAME and copy the VALUE_ID (type MDM_UNIQUE_ID).
Now back to where we left off in the original record (MDM_PARAMETER), loop through the table found at field TAXONOMY_ATTRIBUTES of the MDM_TAXONOMY_ENTRY looking in ATTR_INFO for the correct ATTR_NAME. When the correct entry is found, update the ATTR_FEATURE_DOMAIN with the new VALUE_ID and viola, you've got a mdm record ready to be updated.
Simply call IF_MDM_CORE_SERVICE-UPDATE( ) with the modified record and you've updated your attribute assignment.
In short:
Navigate to the MDM_TAXONOMY_ENTRY of the product record
Retrieve the attributes from the corresponding taxonomy table and navigate to the unique ID of the desired attribute
Navigate to the attribute within the record's MDM_TAXONOMY_ENTRY and update the VALUE_ID with the new unique ID
Update the product record
Regards,
Brian Dennett

Rules and matching on Taxonomy attributes

Hi,
I need to find duplicate records based on the attributes of taxonomy. But in the rules section we can only drill down to class level not the characterstic level.
For eg:
Class: Shirt
     Atrributes     Values
      Size          40
               42
     Colur          Black
               Blue
     Type          Full
               Shirt
The rule should be on attributes. So if two records are having same Class-Attribute combination they should be identified as duplicates.
How can we do this using MDM?
Regards,
Ketan

Ketan,
There is no such facility available in Data Manager in MDM 5.5 SP05.
May be its possible (not sure) using MDM Java APIs or ABAP APIs.
Probably soon we will see this feature in MDM SP06 or 07.
Pls rewards if found helpful.
BR,
Alok Sharma

Report or table to extract attributes linked to a user

Hi all,
I am looking for a standard report that I can use in order to extract the CAT attributes of my users.
For sure it is possible one by one with FM BBP_READ_ATTRIBUTES but I need it for some hundred users.
Is there a way without a z-report?
Thanks and best regards
AD

Hi,
Useful links:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/srm/codeSample2-Reporttodisplayuserattributes
Re: standard program/FM/Table which lists all user ids and their attributes
BR,
Deepti.

Taxonomy Attribute Link

Similar Messages

Maybe you are looking for