Taxonomy for an Education Site using Portal
We are an education site using Portal. We would like to define a taxonomy of perspectives and categories for our site.
We would be very grateful to any educational site that has already gone through this exercise and could help us in defining our taxonomy.
I am currently working with the state of kentucky in defining a list of perspectives in regards to how people view Ky Dept Ed.
I can not share anything as of yet but would suggest that you point your browser toward Ohio's Education page located at:
http://www.ode.state.oh.us/
I think the visitors tab would give you a good place to start.
Best of Luck,
Christopher
christopher whiteley
http://www.billboard.net
Similar Messages
-
How to update 'Primary_Per_Type' flag for a Party Site Use?
Hi,
We have few party sites flagged as Primary Bill To and Primary Ship To. We want to change this flag for these party sites and flag some other sites at Primary Bill to and Primary Ship To party sites. This is required for correct defaulting of the Bill To and Ship To in iStore (R 12.0.4).
iStore users are not allowed to change bill to addresses and hence the orders placed are having wrong bill to address. Besides, 'Profile' link has been removed for all iStore users and Primary User functionality is also not implemented.
I tried using 'Oracle Customers Online Super User' responsibility but it does not show Primary checkbox for Address Purpose.
Thanks,
VishwasHi Vishwas,
As soon as you mark one site as primary for some usage say "BILL TO" then the other site gets de-marked. So the basic thing which you need to do is mark the new site as the primary "BILL TO" and the unchecking will be taken care of.
Now the thing is that whether you have already created the new site and now trying to mark the site use as primary or you are yet to create it. If you are yet to create it then i think the primary flag might be exposed. Otherwise you will have to personalize the page to expose it. In the former case also you will have to personalize the page to expose the primary flag.
The other option which you have is to use the TCA APIs to do so from PL/SQL.
Regards,
Ravi -
ISDN backup for ADSL connected sites using separate router
In our set-up we have a central site with a large number of remote sites connected.
We have moved a number of remote sites from ISDN connections to ADSL connections. However, we would like to keep the ISDN and use it for backup.
The problem I have is - how do I implement ISDN backup with our current set-up? From the documentation, I can see how to do this for more "straightforward" set-ups but not for the set-up we have! Let me explain:
At the central site, we have a Cisco 7206 router. The ISDN connected sites connect directly to this router (which is configured with a large number of dialer map statements for each site)
The 7206 connects to a PIX515E firewall. The ADSL connected sites connect over the public internet using IPSEC with the tunnels terminating on the PIX.
The 7206 router contains static routes for the ADSL connected sites, pointing to the firewall.
At the remote sites, we have a Cisco 837 router for the ADSL connection.
This is connected (via ethernet) to the router we want to use for ISDN backup - a Cisco 800. The 837 and 800 are configured with HSRP.
However, at the moment, if the 837 or the ADSL link was to go down, there would be no means to connect to the central site. How can we configure this to use the 2nd router for ISDN backup, given our set-up?
Any suggestions would be greatly appreciated!
(incidentally, I have only recently joined this company and have taken this over, without any information to go on as to why things are set up as they are !)Hello again,
I think you can pretty much ignore my last message. I've done a bit more digging and I think I have a better idea of what you mean now!
Lets see if I've got this about right. To recap:
I need to set up a GRE tunnel between the remote site and 7206 router at head office, which in turn would be using IPSEC tunnel between remote router and PIX.
So, steps required:
1) set up IPSec tunnel to to PIX (this is the way it is already currenly configured - am I right in thinking no further configuration would be required as far as the PIX is concerned, for the new set-up?)
2) set up GRE tunnel between remote ADSL router and 7206 - requires tunnel interface on both router with start point and end point configured. Use GRE keepalive to enable the line protocol to be brought down if the far end cannot be reached.
3) Add static routes on ADSL router to reach head office network via tunnel interface
4) Add static route on 7206 router to reach remote network via tunnel interface
5) Configure ISDN map statement on 7206 mapping remote network to ISDN number
6) Configure "floating" static routes on 7206 to use ISDN to reach remote network
7) Configure HSRP on ADSL and ISDN routers with tracking of tunnel interface. If tunnel interface goes down, then ISDN router takes over as active.
8) Configure static routes on ISDN router to point to head office network using BRI0 interface.
So, under normal operation, traffic between head office and remote office will be routed across the GRE tunnel using the ADSL link.
If the ADSL link was to go down then the GRE tunnel would also go down. So, the 7206 would then use the floating static routes to reach the remote network via the ISDN connection.
The ISDN router would take over as active at the remote site since the tunnel interface would have gone down, forcing the HSRP to failover.
Does that all sound about right? Is there anything I've missed?
I'll start trying to put some configurations together when I get the chance - but, if its ok, I'll probably run these past you too, just to make sure they seem correct!
Thanks,
Neil -
Looking for interMedia web sites using text retrieval
I'm looking for web sites which use interMedia to support their site search function. My goal is to evaluate intermMedia for use as a full text search engine.
I'm particularly interested in sites which use the thesaurus features.
Thanks.There are many sites on the Internet that use interMedia Text for site search and for catalog search.
While we don't track which Oracle customers use particular components of the database such as interMedia, here are a few good examples for you to try :-
oracle.com - of course
myCNN.com - CNN's personalized news service
bol.com - on-line books, music etc.
- Steve B.
null -
How to handle error when importing taxonomy for product using XML?
We are on MDM 5.5 and built a repository for SAP R/3 Material Master. It has basic material information and taxonomy information as well. We built an import map based on an XML file, which includes basic info as well as taxonomy (classification) info. The import process runs smoothly. But if the import file includes some materials which characteristic values don't exist in MDM, the import will fail and exception file has a complete different format as our import file also it only display one material. Therefore, we cannot reprocess the exception file for errorred out items. What could we do wrong? By the way, we use "Create Pivot table" option in MDM to create the original import map.
Hi Micheal,
I Think your problem is similar to the below one,you can refer the below link for the same.
Import file using Pivot Tables
What you need to make sure is that you are using the same structure of the source file for importing as you used while creating the map else it wont work.
Your schema of the source file as well the schema used when creating the map must match.
You can refer the below links to know more about Taxonomy data importing:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30aa1447-80a1-2a10-e483-a76087bcb12f
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6090d0bd-1da7-2a10-468f-bdd17badb396
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8090941f-a5a7-2a10-3ba6-b4af5ec6d97b
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/308c62a2-5faa-2a10-fda6-fa4aa7169734
Hope It Helped
Thanks & Regards
Simona Pinto -
Any reference site using CISCO or Big -IP for load balancing
we are considering switch based load balancing solution for middle tier. Are there any pointers , reference sites ?
I am aware of sites using Metrics Server for forms server load balancing. We are not planning to use MS.
regards
shrikantHi Naveen,
You need to do following steps (Try first in Test env ;)
1. Login in to Oracle Applications Manager Portal
2. Navigate to AutoConfig section (Site Map->AutoConfig)
Configuration Wizards
Click on "Launch Wizards"
3. Fill in fields as instructed.
(Basically you need to put Vhostname + Apache Port number)
4. Run autoconfig
If you haven't got those wizards:
1. Install Latest OAM patches (It is good idea to be on the latest patches of technology stack of Apps).
2. Or if you cant, you can to try edit Context XML file for each server manually:
2.a
s_webentryhost <Vhost>
t_session_persistent true
t_dns false
s_webentrydomain <your domain>
s_webentryurlprotocol http
s_active_webport 8005
-- If you havent got mentioned parameters in the XML context file you need to apply latest template autoconfig patches
2.b
run autoconfig
Hope it helps,
Yury -
I am an international student studying in Kettering University, US and i have an isic that is international student identity card. Can you tell me what is the procedure to claim for a discount by using my isic. Want to buy ipad air 2 for education.
Welcome to the US! I think you can just take your ID card to the Apple store or shop online : http://store.apple.com/us/browse/campaigns/education_pricing
the site has all the info for eligibility and available items for purchase -- I think you can type in your school to see if on list of approved schools. I think the ID checking is rather benign. discounts are modest from what I recall. -
Portal sites using Personalization Server
One of our customer is a big portal site. They are using Vignette for
content management. They want to change their infrastructure. They want to
getrid of Vignette.
Is there any portal site using a solution Personalization server + Weblogic
Server for their sites ?
Regards.
Ali Rýza SogukpinarThis is an old posting, but if you happen to read again, looked at Fatwire
yet?
David S. Hawkins
[email protected]
"Ali Riza Sogukpinar" <[email protected]> wrote in message
news:[email protected]..
One of our customer is a big portal site. They are using Vignette for
content management. They want to change their infrastructure. They want to
getrid of Vignette.
Is there any portal site using a solution Personalization server +Weblogic
Server for their sites ?
Regards.
Ali Rýza Sogukpinar -
I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Are they necessary to add? Why would one add these tags and how do I add H Tags to iweb? And are there examples to look at? I am slowly learning about simple web design and assumed that iweb was stand alone without having to write code. Is this one of the reasons iweb is no longer supported? Thanks for looking at this!
A simple text page like this:
Heading
sub heading
text paragraph ....
Is traditionally represented by html tags like:
<h1>Heading</h1>
<h2>sub heading</h2>
<p>text paragraph ... </p>
I would guess that the use of h1-h6 tags helps search engines to understand the structure of a page as the tags imply a certain structure.
This can be compared to more generic tags like <div> that could represent any kind of content - and may be what iWeb uses (you'll have to check yourself).
I would generally recommend that you use some kind of up to date blog/site building tool, perhaps Wordpress or Squarespace (I haven't used either one myself) that support current web technologies - this should reduce your SEO issues and make it easier to properly support mobile/tablet users. -
How do I access websites that warn: "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...."? When I try to download any alternate browser, all I get is another warning that the alternate is "not compatible with your operating system." Is Firefox preventing this? The site listed below is a job application site. I've had this same problem with other job application sites also.
== URL of affected sites ==
https://storefront.kenexa.com/lithia/cc/Home.ssThere should be a User Agent Switcher menu item under Tools, which gives you the browser names you can impersonate.
The menu item name changes to the browser UA you are presently using.
There is also a User Agent Switcher button, you can add it using View -> Toolbars -> Customize, and dragging the button to your toolbar.
See http://chrispederick.com/work/user-agent-switcher/features/ and http://chrispederick.com/work/user-agent-switcher/help/
You can just start trying IE versions (or the versions it says on the site) until it lets you in. -
Follow-up webdynpro for abap using portal theme nw2004s, sp12
Hello,
I wanted to get a follow up to this thread,
Re: webdynpro for abap using portal theme nw2004s, sp12
We are having a problem with the way reports developed in Web Dynpro for ABAP displayed in the portal (the pop-ups and dropdowns look out of wack). The issue appears when we wrap the reports into portal themes (either standard or custom). As per the thread (the link for which I posted above), the suggestion was to apply WDFORCEEXTERNALSTYLESHEET parameter to the WDP, however our system doesn't have this parameter in the system, but it seems like I can create my own parameter. Can some on give me all of the properties assigned to WDFORCEEXTERNALSTYLESHEET in table WDY_APP_PROP_DEF.
Thank youHi Brad, I was trying to apply the note 1033496 but our ABAP servers does not have the WDFORCEEXTERNALSTYLESHEET parameter available in WDY_APP_PROP_DEF table. All other notes are not applicable to our issue.
The portal is NW2004s SP12, the ABAP server is NW2004 SP11
Regards.
Message was edited by:
Aleks Ozerov -
Can I use a domain for one site and mobile me for a different site?
Can I use a domain for one site and mobile me for a different site?
I have two sites, I would like to have up and I would like to do one through a domain and one through mobileme is this possible?Yes you can. You can use the CNAME method of forwarding for the first site (the top site in iWeb) and use the MMe URL for your account for the other site: http://web.me.com/YourAccount_Name/SiteName/
OT -
Sites using TALEO for job searches no longer works in 19, worked in last official 18 release
Company websites which use the TALEO job search/apply app/site, no longer work right in 19, they worked fine in 18.xx. Specially, the job search function does not work right when entering the TALEO job search parameters then hitting SEARCH FOR JOB does nothing. AN example site (which does not require registration) is https://nielsen.taleo.net/careersection/3/jobsearch.ftl?lang=en. If I make selections for JOB FIELD and/or LOCATIOn then hit SEARCH FOR JOB, nothing happends. Sites using TALEO worked fine in the last offical 18.x release. TALEO worksd fine in IE 7&Chrome 25.
Clearing the cache does not change behavior. Finally did a full FF reset--no change.
WIN XP SP3 | Dell Dimension 4600 | 1.2 G RAMI am running Firefox version 19.0.2 and I have the same problem. I am able to filter using Internet Explorer which I really don't like. Rather than users having to figure out why this isn't working either Taleo needs to fix their scripts or a fix needs to happen in Firefox.
-
How to track the history of supplier sites used for tax reporting (1099)
Hi,
Oracle financials doesn't allow two supplier sites setup as tax reportable sites (Unless one is inactive). Suppose if the supplier uses site1 for the year 2009 and site 2 for 2010 and now there is site3 setup as tax reportable. All three sites were setup in 2009 and all three sites are active. Supplier chosen different sites for each year as their tax reportable site.
How do we know which site oracle used to send 1099 for 2009 & 2010? How to track the history of supplier sites used for tax reporting (1099) in previous years?
Thanks in advance.
Regards,
RamWould the begin_date, end_date and status columns on HZ_PARTY_SITES_USES be any good? Our R12 installations is too new to have accumulated much data yet, but I would look in those columns first.
-
I downloaded Mozilla firefox when I first got my mac as I did not like safari.Thah being said,which is better? and lastly can I still use cmd t or cmd with firefox for opening multiple sites? Thanks,Ralph
You need to visit this page and learn all about Firefox's awesome features, don't ignore the add-ons, toolbar>customize or persona's they really personalize Firefox.
http://www.mozilla.org/en-US/firefox/central/
Also you need to make sure your browser plugins are current for your whole machine, Safari included.
http://www.mozilla.org/en-US/plugincheck/
I hope one day Apple will make Safari as awesome as Firefox and allow the choice it has, but not today.
Maybe you are looking for
-
Adobe Application Manager hangs on installation, can't download any CC
I just upgraded from CS 5.5 to Creative Cloud (I'm running OSX 10.6.8). When I try to download the programs from the "apps" page of creative.adobe.com, the download manager opens and then hangs on the "updating Adobe Application Manager" screen for s
-
My phone started resetting today over and over and then shows the icon to plug into itunes. When I tried plugging in, a message pops up saying that itunes can't connect because my phone has a passcode and i need to unlock it to connect. my phone won'
-
How do i unblock my phone to other network?
I have change my mobile network and need to get my phone unblocked can some one tell me how to do this?
-
Ad-hoc QD Questions!!!
Hi, I have a few questions about Ad-hoc Query Designer which I was asked during a training and I hope very much you can answer them: 1) During Query execution, Internet Explorer doesn't always open a new window. If the query is not saved, it is lost.
-
Can I change the side (left instead of right) the submenu pops-out on?
My submenu flys out to the right hand side of my main menu: Is it possible to have the submenu flyout to the left hand side instead? I have looked through the options and tried dragging it over but neither have worked.