Taxware User Exit.
Hi Experts,
Working on FYTX0002 user Exit.
I am tyin to write code inside the include within a function module EXIT_SAPLFYTX_USER_001.
Depending upon some condition i need to decide whether or not to call the Taxware RFC,,,,
While creating or changing sales order & purchase orders.
Do Someone know the name of the RFC being called in ECC 6.0.
How do i restrict the RFC from geting called.?
<removed_by_moderator>
Regards,
Kevin.
Edited by: Julius Bussche on Jan 30, 2009 9:41 PM
You can find all function module related to tax calculation in External system under the function group FYTX.
PS : But i don't much info whether these will be used for TAXWARE or VERTEX
Restirct RFC from being called
if condition eq okay
call function 'XXXX'
else.
do nothing
endif.
Is this was you are looking for ?
, a®
Similar Messages
-
Taxware User Exit ECC 6.0
Moderator message: do not offer points
Hi Experts,
Working on FYTX0002 user Exit.
I am tyin to write code inside the include within a function module EXIT_SAPLFYTX_USER_001.
Depending upon some condition i need to decide whether or not to call the Taxware RFC,,,,
While creating or changing sales order & purchase orders.
Do Someone know the name of the RFC being called in ECC 6.0.
How do i restrict the RFC from geting called.?
<<Text removed>>
Regards,
Kevin.
Edited by: Matt on Feb 1, 2009 9:17 PMYou can find all function module related to tax calculation in External system under the function group FYTX.
PS : But i don't much info whether these will be used for TAXWARE or VERTEX
Restirct RFC from being called
if condition eq okay
call function 'XXXX'
else.
do nothing
endif.
Is this was you are looking for ?
, a® -
A/R User Exit Spec and code
The spec -
1. Canadian tax - currently based on Freight type: Read the country(?) Ship-from (plant jurisdiction) to Ship-to(customer jurisdiction) and the inco term on the line item of the sales order and if it's not equal to 'DDP' the line item tax classification will be set to '0' exempt. (This is freight that comes into Canada from the US)
We will look at the shipto and shipfrom txjcd on the sales order document and billing document along with the inco term logic and we will tax freight when they are both Canada
Example Scenario:
For Freight charges where the Ship from is in Canada (Bedco, Artmedco, etc) and the Ship-to is in Canada the freight will always be taxable regardless of the inco term. This is freight that ships within Canada, no boarder crossing.
2. Regular Freight - US & Canada: If separate line item on sales order, it may be exempt from tax based upon state. revisit
a. D.1 Freight included on the line item
i. The freight is passed to the external system by populating the field FREIGHT. The freight amount is always included in the base amount.
ii. An example to fill the freight using the user-exit:
iii. In the customer pricing procedure (for example ZUSA01) enter 4 in the subtotal field of the freight condition type (OTC must have this configuration in the pricing procedure for the freight pricing conditions).
iv. In the customer structure CI_TAX_INPUT_USER, add the field KZWI4 as in KOMP-KZWI4.
v. In the user-exit, add the code CH_USER_CHANGED_FIELDS-FREIGHT_AM = I_INPUT_USER-KZWI4.
3. For PO Specific A/R Tax Exemptions using material tax class of 2, pass the TAXM1 field to the ACCOUNT_NO field in Taxware
oSolution:
For PO Specific Tax Exemptions CSR will go to the line item detail Billing Tab, Tax Classification field (TAXM1) and change that to 2 One-Time Exemption. Configuration complete.
CSR will go to the Text Tab, Internal Item Notice and CSR will provide a brief description as to why that line is tax exempt.
This the code----
TABLES: KNVV, KNA1, KOMK, MLAN, T001W, KNVI.
DATA: w_taxm1 LIKE mlan-taxm1,
i_kna1 LIKE kna1,
c_com_tax type com_tax,
i_komk LIKE KOMK.
*--- if this freight comes into canada from US then set TAXM1 to 0
*----otherwise set TAXM1 to 2 and apply frieght charges. Set ACCNT_CLS
*----to 'Y' each time TAXM1 is passed to ACCNT_NO.
IF KNA1-LAND1 EQ 'CA'.
IF C_COM_TAX-TXJCD_SF EQ C_COM_TAX-TXJCD_ST.
CH_USER_CHANGED_FIELDS-FREIGHT_AM = I_INPUT_USER-KZWI4.
w_taxm1 = 2.
CH_USER_CHANGED_FIELDS-ACCNT_NO = W_TAXM1.
CH_USER_CHANGED_FIELDS-ACCNT_CLS = 'Y'.
ELSEIF C_COM_TAX-TXJCD_SF NE C_COM_TAX-TXJCD_ST.
C_COM_TAX-TXJCD_SF = C_COM_TAX-TXJCD_ST.
C_COM_TAX-TXJCD_POA = C_COM_TAX-TXJCD_ST.
SELECT SINGLE * FROM KNVV
WHERE INCO1 = KOMK-INCO1
AND INCO1 NE 'DDP'.
IF SY-SUBRC EQ 0.
w_taxm1 = 0.
CH_USER_CHANGED_FIELDS-ACCNT_NO = W_TAXM1.
CH_USER_CHANGED_FIELDS-ACCNT_CLS = 'Y'.
ENDIF.
ENDIF.
ENDIF.
SELECT SINGLE taxkd FROM knvi INTO knvi-taxkd
WHERE kunnr = i_komk-kunwe
AND aland = i_komk-land1.
IF SY-TCODE = 'VA01' OR SY-TCODE = 'VA02' OR SY-TCODE = 'VA03' OR
SY-TCODE = 'VF01' OR SY-TCODE = 'VF02' OR SY-TCODE = 'VF03' OR SY-TCODE
= 'VF04' OR SY-TCODE = 'VF05' OR SY-TCODE = 'VF05'.
SELECT SINGLE * FROM kna1 INTO i_kna1
WHERE kunnr = i_komk-kunwe.
IF i_KNA1-land1 EQ 'CA'.
C_COM_TAX-TXJCD_SF = C_COM_TAX-TXJCD_ST.
C_COM_TAX-TXJCD_POA = C_COM_TAX-TXJCD_ST.
ENDIF.
ENDIF.
I am able to enter the user exit, but there is no value for KNA1-LAND1 or C_COM_TAX-TAXJCD_SF or C_COM_TAX-TAXJCD_ST. Does anyone what I am missing ? Please help.
Thanks in advance !!!!
NHi NP ,
which User exit ur using ? Are u talking abt MIRO or VF01.
Regards
Prabhu -
User exit ZXPADU02 - evaluating SY-UCOMM
Hello everyone,
I am trying to display an error message whenever someone tries to create a new work schedule rule (P0007-SCHKZ) in infotype 7. However, the error message should just come up when the user is trying to save his data.
I am using user exit ZXPADU02 for this purpose. My problem is that SY-UCOMM does not seem to hold reliable data in this user exit, and SSCRFIELDS does not seem to be supported at all.
My code looks like this (only the relevant code snippet in ZXPADU02):
CASE INNNN-INFTY.
WHEN '0007'.
CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
EXPORTING PRELP = INNNN
IMPORTING PNNNN = P0007.
CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
EXPORTING PRELP = PSAVE
IMPORTING PNNNN = P0007_ALT.
IF P0007_ALT-SCHKZ <> P0007-SCHKZ
AND IPSYST-MASSN IS INITIAL " do not warn within an info group of a personnel action
AND SY-UCOMM = 'UPD'. " only warn when saving the data -> problem here <-
MESSAGE 'Do not change IT7 directly or else.' TYPE 'I' DISPLAY LIKE 'E'.
SHOW_DATA_AGAIN = 'X'.
ENDIF.
At first glance, the above works nicely. But this is what happens when I test more thoroughly:
I create a new period in IT 7, enter a P0007-SCHKZ other than the one that was previously valid, press F11. Some warnings appear (for different reasons), which I dismiss using the Enter key. Afterwards, the above code fires, the error message is being displayed, and I am thrown back into the data screen. So far, so good.
Now I simply alter the value in the field "Weekly hours" (P0007-WOSTD) and press Enter (!). Again a series of warnings appear, including one that a dataset is going to be deleted (seeing that an IT 7-period with just the same date range already exists). I confirm that with Enter, and the data is being saved. The above code does not fire because I have only pressed Enter - but the data is being saved anyway!
Looks like a pretty erroneous behavior on the side of the SAP system. The question is whether I have a chance to do something about it in the code.Mihir Nagar wrote:
Dear Petersen,
Your IF condition seems ok. I doubt on the message statement. Can you replace your message statement with type E.
MESSAGE 'Do not change IT7 directly or else.' TYPE 'E'.
ENDIF.
Hope this works.
Regards,
Mihir.
I did not expect this to work, because normally you use type 'E'-messages only in certain PAI-environments, but it does the job, thank you!
make use of field IOPER of the structure PSYST to check on the infotype actions INS, MOD, COP, DEL...
In this particular case I did not care, so I did not check that. IT 7 should only be maintained through personnel actions in our case.
Next you can check with sy-ucomm field the different between "enter" and "save". With "save" sy-ucomm will be 'UPD'.
That is what I did, but as I described, there was a situation when SY-UCOMM is SPACE, but the system saved anyway due to a prior save attempt. -
Using a variable not in the Export,Import, table Parameters in USER EXIT
Hi all,
During the Invoice Creation, I need to add an entry in the VBFS table, so that it will be displayed in the system log. In the FM 'RV_INVOICE_CREATE', the structure corresponding to it is XVBFS. There is a user-exit CALL CUSTOMER-FUNCTION '002', in this FM 'RV_INVOICE_CREATE'. But the import, export or Table Parameters does not have XVBFS.
How can I use XVBFS inside the User exit?..
Please help.
Regards,
AshaHi,
I dont know whether this will help u...
write this in user exit...to access variables/tables of main program..
FIELD-SYMBOLS: <komv>.
ASSIGN ('(SAPLMEPO)TKOMV[]') TO <komv>.
where.. SAPLMEPO is the main program...and TKOMV[] is a internal table in SAPLMEPO.
regards
Sukriti.... -
How to find out the user exit is implemented
Hi All,
Kindly let me know the process to be followed to find out the User exit is implemented in SAP system.
I have seen many senriors suggestions for some treads to check if there is any Exit is implemented in the process when the system is behaving differently rather standard.
Is it the only way with help of ABAP'er we can find out or the functional consultant also can find out through some procedure?
I tied in google for this doubt, but i could not get the relavant answer.Pleaea execuse me if this already answered.
Thanks,Hi Krishna/TW,
Thank you for your immediate replies. Sorry i think i have not explained correctly my requirment.
Let me explain my requirement once again.Let us say Comapny has implemented one Exit in the project, now i want to find out what exactly the Exit was implemented.
Example: In STO process user is able to increase the qty in delivery. As per the client requriement system should not allow.
This is not possible in standard to control even after maintainig check over delivery field in 0VLP.
For this comapny has already implemented one enahnceament.
User Exit : USER EXIT_READ_DOCUMENT
Program: MV50AFZ1
like this when any one joined in the project we do not know what are all the Exits are implemented in the SAP system where we are working.
So if i want to find out if there is any Exit or enhancement implemented, what is the process to find out?
I hope now am clear with my requirement.
Thanks in advance. -
How to find out the user-exits?
hi.
how to find out the user-exits?
regards
eswar.Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards -
How to find out appropriate user exit
Hi,
I want to know how to find out the user exit that matches to the requirement. Suppose for a material master program, there are so many include programs hence im unable to find call custer-function and even unable to debug an appropriate include. Please help me out how to learn user exits in a rightious way.
Thanks
BasuLook for program SAPICSS_ in your system and run it. This program can also be found under CMOD menu: Utilities -> SAP enhancements.
This will only give you the CMOD user exits.
There is a program someone made that searches for all sorts of user-exits (including BADI's etc.). I remember that it was posted on sapfans.com
Edited by: Maen Anachronos on Apr 6, 2009 3:22 PM -
How to find out FICO user exits that are used by User
How to find out the FICO user exits that are used by user.
Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
pls assign points if helpful as a way to say thanks. -
Free Goods Problem and User Exit if needed in Sales Order
Hello All,
The problem is related to Free Goods in Sales Order which is given with an example -
We have maintained Free Goods ( T Code - VBN1) in inclusive scenario which is as follows -
For 210 PAC (Pack) of Material A 18 PAC Free.
Where 1 PAC = 20 BT (Bottle) and 20 PAC = 1 CV (Case Pack)
In the material master of Material A the Base Unit Of Measurement (UOM) = PAC and Sales UOM = Blank so that we can use any conversion factor maintained for the material.
The conversion factors maintained for Material A are as follows -
1 BT = 1BT
1 PAC = 20 BT
1 CV = 20 PAC
Now when we are raising sales order for 11 CV the free goods are not generated in the Sale Order.
Again if we maintain the Sales UOM in CV and raise the sales order it is showing :
10 CV as main item and 1 CV as Free which is wrong because in the conversion factor we have already maintained 1CV = 20 PAC , Whereas in the inclusive scenario it is given 11CV = 210 PAC and 210 PAC = 18 PAC is free.So in any case it is taking into account 2 more PACs.
Please suggest what need to be done in this case in respect of User Exit or Source Code in ABAP if needed.
Thanks & Regards
Priyanka MitraHello Priyanka Mitra,
We are facing a problem same as you.
How did you solve this problem?
We are very glad if you teach it concretely.
Please advise your solution to us.
Thanks. -
User Exit/ Badi for Changing Quant parameters during TO Creation
Hi Gurus,
Could you please guide me to advice the User Exit/Badi which can be used for changing Quant Data during TO Creation.
User Requirement: Using "Recepient Field" in MIGO as a Key Value for FIFO in WM during goods issue. Receipient is copied into TR and TO (Standard SAP Functionality). For the purpose of Stock Removal based on Receipient Value, we need to copy this value into Quant Data field named Certificate Number ("LQUA-ZEUGN").
I will highly appreciate reply from Gurus.
Regards,
Gupta MHi manish,
Use the Exit MWMTO001 for this purpose and modify the table accordingly. This will solve your problem.
Thanks,
Shibashis -
BADI/user exit for transcation code "BP" in CRM
Hi Experts,
Is there a BADI / user exit that is triggered after successful saving/updating of Business Partner using transaction code "BP"?
We want to send general infos such as partner number, Name, Birth date, etc. about the business partner being created/updated using IDoc.
We are using CRM WinClient 4.0.
If you know the steps on how this requirement will be done, kindly post them.
Thank you very much.I don't have any CRM system at hand, but I'm sure there are some BAdI's for this. Look in SE18 for BP or BUS, and i'm sure you will find something.
One suggestion though: Before going for the BadI, try and see if CRM also uses change pointers for sending Idoc's . This case you wont need any user exits / badis, an probably no programming at all.
Transaction
BD50: Activate Change Ptrs for Mess. Type
BD61: Activate Change Pointers - Generally
and use report RBDMIDOC for triggering IDoc. -
What are the user-exits which will trigger on saving Sales Order
Hello Experts!!!
I am working on Sales Order VA01. The requirement is I need to pre populate Sold-to-Party field. I find out user-exit (V45A0002 Predefine sold-to party in sales document ). So it is working fine.
Now second requirement is I need to capture all the date once user saves Sales Order. Also the time or Sales Order creation I have to make u2018GRAYu2019 some of the fields so user cannot change the value. Can anybody tell me which user-exits should I use to retrieve the entire information user entered and lock fields in Sales Order screen?
Thanks a lot on advance.Hi
U can't find it there,because it's a include, not enanchement.
So u need to use the trx SE38, not CMOD.
For sales ored there aren't the enanchements, but only some FORMs defined in particular includes.
U need to get the access key by OSS in order to change them.
These are the rest of the includes where u can find other exits:
INCLUDE MV45ATZZ. " Data definitions in MV45ATOP
INCLUDE MV45AOZZ. " User-modules PBO
INCLUDE MV45AIZZ. " User-modules PAI
INCLUDE MV45AFZA. " User-forms < 3.0
INCLUDE MV45AFZB. " User-forms
INCLUDE MV45AFZC. " User-forms < 3.0D
INCLUDE MV45AFZD. " User-forms 3.0E
INCLUDE MV45AFZF. " User-forms 3.0F
include mv45afzg. " User-forms 3.1G
INCLUDE MV45AFZH. " User-forms 4.6B
INCLUDE MV45AFZZ. " User-forms
INCLUDE MV45AFZ4. " User-forms 4.0
Anyway u can find some information about these exit in customizing (trx SPRO):
Sales and Distributions->System modifications->User exits
Max -
IW31 - User Exit / BADI for changing data in Component's Order.
Hi gurus,
I need to update the field WEMPF in the order components during the Order Creation (Tx IW31).
Is there any User Exit or Badi I can use?
Thanks in advance !!At WO10009 User Exit...we can use this FM:
CO_BC_RESBD_OF_ORDER_GET -> Get RESB internal table.
CO_BT_RESB_UPDATE -> Update RESB table.
Althought during creation (IW31) when the order numer is temporal ($$$$$$$$$$$1), this FM works great, cause it reads from memory, not from database.
Regards, -
Name of the structure needed for sales order user exit
Hi,
I am planning to write a user exit which will insert the data into my ztable the moment the new sales order is created and is saved.
I have identified FORM USEREXIT_SAVE_DOCUMENT as the necessary user exit. But the problem is that while inserting the data into the ztable I cannot insert the data from vbak as the data will be inserted into this table after the SO is saved.
Thus I need to identify a structure which is used to populate the vbak table so that it simultaneously inserts the data in the ztable as well. Can anyone help me with the name of the structure so that these fields i.e. vbeln, vkorg, vtweg, spart are inserted into my ztable?
Also need to know how to convert the net value i.e. vbak-netwr in Indian Rupees as it gets stored as Dollars ....
Thanks,
Vinod.Hi,
One of the structure being used is RV45A, there are several other str's being used as well for various calculations,
check out program SAPMV45A for the same.
& in order to convert vbak-netwr to rupees use the below statemetnt,
WRITE vbak-netwr TO zvbak-netwr CURRENCY INR.
Regards,
Raghavendra
Message was edited by:
raghavendra ay
Maybe you are looking for
-
Error in @Override while chaning from JDK1.6 to JDk1.5
Hi, I am getting following error while migrating from JDK1.6 to JDK1.5. Multiple markers at this line - implements org.quartz.Job.execute - The method execute(JobExecutionContext) of type TransferFiles must override a superclass method
-
Expose Preferences Keep Changing Themselves
I have Active Screen Corners activated for Expose. However the upper left corner keeps unactivating itself. Is there any way for me to track this preference in the system to see what is modifying it?
-
Hi all... I'm on an MBP early 2011 w/ EFI 2.7 I have a 1TB ssd. As subject what I'm trying to achieve is to have 4 partitions: - 300 Gb - mavericks - 300 Gb - windows 8 w/ EFI boot (I know 8.1 isn't supported yet, so I will upgrade when it will be) -
-
Changing background color in Finder Cover Flow view possible ?
Hi, is there any possibility to change the color of the background in the Cover Flow view of Finder ?? Thanks for some answers
-
Heres the Lowdown, I have a Desktop that has a 250 G Solid state hard drive , and a secondary 750 G Hard drive. My OS is installed on the solid state , and also a lot of my audio software which needs to also be on the same disk drive as the operating