TB 24.4.0 simply DOES NOT SAVE email PASSWORDS . . . after rebooting

Subject says it all . . . I installed 24.4.0 on a Windows 7 x64 system and followed the installation instructions to the letter . . . adding a single GMAIL email account with password.
After the install, I checked Options > Security > Passwords > Saved Passwords > Show Passwords to confirm the GMAIL email account password existed - and it did.
While the PC was powered on and I was at my Desktop, TB worked perfectly. But once I powered down or rebooted, TB no longer had the GMAIL email account password. To confirm this PROBLEM, I checked Options > Security > Passwords > Saved Passwords > Show Passwords to confirm the GMAIL email account password existed - and it did not - the entry that once appeared was now 100% gone - no entry existed.
Thinking the install was mucked up, I uninstalled TB (and Firefox), then rebooted - ran cleaners - manually searched for every occurrence of TB, FF and mozilla, and removed only the effected registry entries, also searched for every occurrence of TB, FF and mozilla on the HDD added during the install and removed them - then ran the registry scrubbers again.
Once I knew my PC was totally clean of any TB, FF and mozilla files, directories, etc, I ran Windows Update to ensure the system was up-to-date.
Installed FF, then TB 24.4.0 adding a single GMAIL email account with password - and while the PC was powered on and I was at my Desktop, TB worked perfectly. But once again, once I powered down or rebooted, TB no longer had the GMAIL email account password.
To confirm this PROBLEM, I checked Options > Security > Passwords > Saved Passwords > Show Passwords to confirm the GMAIL email account password existed - and it did not - the entry that once appeared was now 100% gone - no entry existed. According, the EXACT SAME PROBLEM REMAINS and I wasted my time uninstalling FF and TB, cleaning and scrubbing, etc.
I do not share my PC, it is a home PC and I am the only person using it - therefore I do not use a MASTER PASSWORD.
When will this EMAIL password problem be CORRECTED? Or, what is the fix?
Thanks,
CurlySue :)

You say you have modified your CCleaner settings for Firefox, have you done the same with Thunderbird
see http://thunderbirdtweaks.blogspot.com.au/2012/06/thunderbird-and-ccleaner-or-my-settings.html

Similar Messages

TS1398 ipod touch does not save the password of the wifi

my ipod touch 4g does not save my home wifi password but in my bussines it does please help

Two things to try:
If your router is set to hide its SSID (network name) then go into the router's administration and change this setting. For some reason, this can cause problems with iOS devices remembering the network password. There's really no need to hide your network name, there are (or were) apps that could show you any and all Wi-Fi networks within range, even if they're hidden.
If you're using WEP encryption, try using WPA2. It is much more secure and seems to play nicer with iOS devices.

HT2623 I have upgraded my Iphone operating system using IO6. Before doing this operation I have backed up the phone and I cannot restore my phone from the backup since it simply does not accept my password.

I have upgraded my iPhone using IO6. Before doing this operation the advises to me is to back up the phone, which I did using iCloud.
When I tried to restore the back it does not access my password which I have given to restore my password.

if you cant remember the password of your back-up encryption, you can't back it up
You will have to restore as a new phone

How to have ipad not save email password

How do you set ipad 3 to not save email password

With the Mail app you can't, you will need to go into Settings > Mail, Contacts, Calendars and remove it and then go back in and add it back when you want to access that account again. You could use Safari instead and create a homescreen shortcut to your account's login page.

Vertical taskbar width does not hold the width after reboot

Hi.
I wonder if anyone could help me with this. I've been trying to google the answer for hours but no luck.
I use the desktop with taskbar on the left side not on the bottom. I'll explain why just to cut questions. Simply because it makes more sense to me to have it on side rather than bottom with 16/9 format of display. I also work with many windows open at the
same time and this way I can have 15 of them on the taskbar without grouping.
Problem.
I need the width of the taskbar to be wide enough at least for 3 icons of the quicklaunch section. Below this width there is not enough space for quick launch icons to fit in the area. I could increase the area but then it uses space for the open windows
tabs and also date/time are not displayed fully. 3 icons is what makes sense for vertical taskbar. Every time I change the width of the taskbar to 3 it goes back to 2 after reboot. No matter whether I lock it or not!
question.
Is there any way of setting the minimal height ( in my case width of the taskbar as it is positioned vertically on the side) in the registry? I mean can I enter somewhere " do not go below bloody 3 icons after reboot ! " in the registry :)
There must be default value somewhere there and this is why it keeps going back to it. If only I knew where is it I could increase it to suit me.
I know it might seem to be silly question but after resizing the taskbar 2 348 times over the past years eveytime I turn the computer on I have had enough.
I would be very gratefull if anybody could help me. Thanks in advance.

Refer :
http://social.technet.microsoft.com/Forums/windows/en-US/2b0ba279-0ded-49b2-b003-713a65e3d645/vertical-taskbar-width-resets?forum=w7itproui
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

Iphoto does not recognize email/password combo

I'm trying to email some pictures but it keeps saying that iphoto does not recognize my email or password combinations for both mine and my husbands accounts.

Have you got iPhoto as the email client or Mail? If iPhoto go into iPhoto's Accounts preference pane, deelete the email account, reboot, relaunch iPhoto and add the account back. Then try again.
Or, set Mail as the email client in iPhoto's General preference pane. It's a better way to go, IMO, as you have better access to Contacts, get a sent copy automatically and also have photo layouts to use in the Stationary/Photos section of Mail.
OT

Server does not recognise email password

The server (cpanel) does not accept the email password when thunderbird tries to connect. wrong user or password message appears. The password is correct as i can connect through webmail service using it.

Such issues are often the result of security software and anti virus programs to test, restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]

Adobe Reader X does not save signed copy after hitting "Done Signing"

Version 10.1.6
When I click "Done Signing" after adding my signature to a signed document, I get the warning about the added text being permanently merged, then the "Save As" dialog comes up, but the file is never saved, regardless of whether I renamed the file or not.
I naively spent over an hour filling out forms and "saving" the results, in the belief that the program was saving my filled out forms just because it said it was. I'll have to be more careful in the future.

When you "save as" as opposed to simply "save", there is sometimes a different location for the file to be saved. When you "save as" to the same location as an original, you will bewarned that a file already exists with that name and be asked if you're sure you want ot overwrite the original file. If you didn't see that when "saving as", you probably saved the signed file to a different location.

Installed Firefox 4. But, it simply does not start. Freezes after I presss 'Search'

I have just finished downloading Version 4. Switched off the computer. Started again by clicking on the shortcut icon. Somewhat bland screen appear, just giving a bar for search. When a search is typed in and 'search' button clicked, there is no response --- as if nothing is active!

Follow these steps to fix it:
Firefox Menu > Options > Toolbar Layout > Place your Reload button to the left of the Stop button and they will integrate after you close the Customize Toolbar box. Do the same, but place them to the right of the address bar and they will integrate into the address bar.
Hope this helps!

Dreamweaver CS5 does not save ftp password

I'm running dreamweaver CS5 on a MacBook Pro with OS 10.6.4 and find I need to enter my user name and password for ftp server access each time I launch dreamweaver. Anyone know of a solution? I haven't had this problem with previous CS versions. Thanks

It's been discussed a fair bit here recently.
See if the following thread helps:
Dreamweaver CS5 losing FTP details on quit/launch
http://forums.adobe.com/thread/645458
Probably unrelated but try updating to 11.0.2 also
http://www.adobe.com/downloads/updates/

Wireless keyboard name does not stick, connection lost after reboot/restart

I know this topic has been addressed many times but I might have additional info to this.
I tried to rename my wireless keyboard. The name stays as long as I only let the computer sleep.
As soon as I do a restart/reboot and the connection is lost again, it's name is set back to the old name.
This might be related to the reason why it looses it's connection over and over again.
Does anyone know where this "name" is stored? There must be a plist file or something somewhere where the name is kept, maybe that's the file which is corrupt and must be deleted.
I also was wondering if it is possible to "reboot" the keyboard itself, maybe this setting is stored on the keyboard itself and it cannot properly maintain it.. that might be a reason why for some users the keyboard replacement has helped.
Michael

So, the same problem occurred and in a relatively shorter time than before. I began to think that something is causing this problem.
My theory is that it is a VMWare software issue. What I've been doing differently recently is using it in "Unity" mode as opposed to "Full Screen" mode. My guess is that the program is modifying my wireless permissions and screwing it all up.
So, what I've done is set the "Network Adapter" to "Host-Only". This denies the VMWare program internet access but still allows file sharing between the Windows virtual environment and the Mac hard drive.
Then I had to re-install Mac OS X all over again to fix the wireless settings/permissions mess.

After installing trial software from logonkey my macbook will not start up, screen asks for systemcode, but blinks off and on and does not allow input password, after this screen goes to blackm

screen flashes, asks for password but cannot enter password as it keeps flikkering... this happened after installing a trial version from the programm 'logonkey'
screen now returns to black and thus stops the startup

Logon Key Support

I get the firefox pop up "do you want to remember this password", but it does not save it. There is no "yes" option on the pop up. How can I get Firefox to save my passwords?

I want Firefox to save my passwords as it has in the past, but now it is not doing so. I am using version 6.0.2, I see the pop up asking to remember the password, but firefox does not save the passwords. What can I do to correct this so FF starts saving my passwords?

Firefox 4 and later versions place a key icon on the location bar that allows to (re)open the dialog to save the password at any time.<br />
That pop-up dialog has a button labeled with "Remember Password".<br />
If you click the arrow next to that button then you see the other choices ("Never Remember Password for this site", "Not Now").<br />

My Fire Fox does not save my History

My Fire Fox 3.6.6 Does not save my History
After 3 days my History does update and places.sqlite after reaching 1000 KB it does not save important links
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; (R1 1.5))

Firefox now always stores the old session, and you can access it by going to the History menu and selecting "Restore Previous Session"
If you want Firefox to display the message to save the session, it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
If you always open the last set of tabs, an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time"

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.

Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site.

TB 24.4.0 simply DOES NOT SAVE email PASSWORDS . . . after rebooting

Similar Messages

Maybe you are looking for