Tb not responding, even in safe mode with networking enabled?

duplicate of [/questions/1054504]
Hi,
I've read many of the questions relating to TB not responding and it appears that it is related to anti virus, however I've restarted windows 7 in safe mode with networking, however TB still not responding. I've also ran TB in safe mode while still in windows safe mode and still not responding. I've uninstalled & re-installed TB all to no avail. I've uninstalled a program I recently installed although it was unrelated but still no change.

''Matt [[#answer-710384|said]]''
<blockquote>
Is your computer a little on the "slow side of things" historically the global search was something of an issue back when it was first introduced. It can sometime be an issue while the initial synchronization of large mail stores occurs. But this is almost always on lower powered machines
Does your machine specification come close the these minimums ?
Pentium 4 or newer processor that supports SSE2
1GB RAM
200 MB hard drive space
</blockquote>
The PC is an HP Pavillion
AMD Phenom II X4 955
8GB Ram
1TB HDD

Similar Messages

IPhoto project will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process. Christmas gift, really need to get this done, have worked MANY hours on putting it together. Please help!

Iphoto book will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process?

Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the fix below:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
After each run thru the repair process see if you can create a PDF file of the book as described in this Apple Document: iPhoto '11: Preview a book, card, or calendar before you order or print it. If you can try ordering the book. If you can't finish trying all of the otpions and then boot into Safe mode and try there.
OT

I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either.

I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either. Anyone have an idea as to what to do?

I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.

I downloaded a adobe flash update and my computer and after next logon got a blue screen. could only start in safe mode and until uninstalling the flash player could i safe mode with networking. i cannot open any microsoft products now. I get a message

i downloaded an adobe flash update and my computer after next logon got a blue screen. I could only start in safe mode and until uninstalling the flash player could i start in safe mode with networking. i cannot open any microsoft products now. I get a message saying adobe acrobat 10 is not designed to run on windows or uninstall and reinstall it ....but it will not let me uninstall it. What do i do? is this all an adobe issue or a windows problem?? thanks Tim

Hate to suggest this, but you need to ask in the Flash forum. This forum is for Acrobat.

Windows 8.1 safe mode with networking issue

Hello,
I have a customer who generally logs into windows using a PIN. They are running windows 8.1 and their only account on the system is a microsoft account set up with a gmail address.
I needed to reboot into safe mode with networking to perform some malware removal for them, and upon doing so I realized I wouldn't be able to log in without the password to that microsoft account, as you can't log into safe mode with the 4 digit PIN. I
contacted them, and they were unable to provide me the microsoft account password.
No problem, I will just reset their password at live.com and log in with the new password. We jump through all the hoops to get the password reset, and of course now all we have to do is connect the laptop to the network so it can learn that the password
has changed and we can log in.
First, I try plugging the integrated ethernet adapter into my network. The switch port lights up, so CSMA/CD is fine with the physical connection, and it even blinks a bit like it's doing things. Unfortunately the network icon in the lower left corner of
the login screen stays disconnected. Okay, I'll try the wifi.
I click the icon, the wifi is off, I turn the wifi on and my wireless network pops up. I click the wireless network and hit connect, and it "checks network requirements" for a while like normal, says it's taking longer than normal, and then says
"We can't connect to the Internet right now. Please try again." with a close button.
Upon hitting the close button it brings me back to the network list, but curiously it says under my network name that it's now connected, and the connect button has become a disconnect button. The network icon in the lower left of the login screen is still
showing a red circle with a white X in it, and the password still isn't working.
The first couple of times I did this it asked me for my WPA key, which I entered. The last time I tried it didn't ask me for my key. Thinking I should probably tell it to forget the network so I can type it again, I tried right disconnecting from the network,
right clicking on it and going to forget this network, but right clicking does nothing in the network UI on the login screen.
I then grabbed a USB ethernet adapter and plugged it into my switch, which lit up the same as when I used the onboard one, but the laptop is still acting as though it isn't connected. It's also worth noting that no ethernet connections appear at the top
of the network UI on the login screen as they would if we were logged into windows.
I don't have a password reset disk. I can't format this system. I've successfully reset the password online, but networking isn't working. What should I do?

I solved my problems by using the sethc trick to enable the local administrator account. I then rebooted out of safe mode, logged into the administrator account, connected to the internet, and then switched users using fast user switching to the microsoft
account, which I was then able to log in to using the updated password.

Have to run windows in safe mode with network to have browserws work correctly. using IE and Firefox. Fist web site comes in correctly next tab just sites wai

have to run windows in safe mode with network to have browserws work correctly. using IE and Firefox. Fist web site comes in correctly next tab just sites waiting for web site Help

If it works in Windows Safe mode then you have a problem with other software, possibly security software or a system driver, that is running on your computer.<br />
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

Is there a difference between any of the Firefox settings in a normal boot as opposed to a boot in safe mode with networking?

I am trying to isolate an issue where I cannot load one particular web page - my local newspaper. The page heading comes up but none of the articles.
In a normal Boot this happens - if I start in Safe Mode with Networking the page is normal and loads correctly.
I was wondering if any part of Firefox is disabled during a Safe Mode boot which could be causing this issue. The website is
http://www.blackpoolgazette.co.uk/news/local
O/S Vista Home SP2. Firefox 3.6.17. Kaspersky AV but for this exercise has been completely disabled

Thanks Luis.
The only difference is the subscriptiion price for students and teachers.
The Creative Cloud FAQ here http://www.adobe.com/products/creativecloud/faq.html covers a lot of common questions.

Cannot boot into Safe Mode with Networking - Windows 8.1 Update

I'm trying to boot into safe mode with networking. I can successfully boot into Safe Mode, but my Network Access is always disabled.
I've tried msconfig / Click on Restart / Restart Now from the Update and Recovery menu in 'Change PC Settings'. They all eventually get me to the Same boot options menu which says ... F4 for Safe mode, F5 for Safe mode with Networking etc.. I
select the F5 Safe mode with Networking and it re-boots into Safe mode but I have no network access.
I'm connecting to my home ADSL, no proxy required. If I boot normally I have network & internet access, but in 'F5 Safe mode with Networking' my networking is disabled.
Windows 8.1 Pro x64

I can see that I am actually connected to my router, but the network icon still shows as disconnected.
What about the Network list via the Settings charm (Win-I)? Last week I was having problems with that one after long sleeps. Later I realized that although I could see the icon in the Settings charm (as normal) when I clicked on it, it still
showed the same icon as I was expecting; the difference is that it didn't show "Connected"; so, clicking on the icon proved that it was offering a Connect button and clicking that finally got me connected. Meanwhile the troubleshooters were misleading
at best and destructive at worst, suggesting I power things off, etc. I don't know if there was a fix for this specific symptom or whether I just tried a different path but yesterday instead of trying the above procedure I tried to see what the Network
troubleshooter associated with IE's "unable to connect" page would do; amazingly it identified the problem precisely. That connection had somehow acquired a connect manually attribute. The troubleshooter offered to fix that problem for me
and I accepted. Since then, no more problem.
FYI
Robert Aldwinckle

How to install Windows Updates in Safe Mode with Networking

On my VISTA Business edition, I was getting BSOD (blue screen) so I booted the system in Safe Mode with Networking. But in this mode when I go to Start Menu-->All Programs-->Windows Updates, nothing happens. Please help.
Thanks..Nam

https://www.youtube.com/watch?v=rMDjZQqz-i8
Steps:
1-Open command prompt with admin mode
Or Boot from DVD in command prompt mode.(This is what i experienced, able to show the safe mode menu)
2- Write this command "bcdedit /set {default} bootmenupolicy legacy" and click enter
3- You can now press F8 while Windows 8 starts in order to access Safe Mode and other Advanced Boot options.

Disable "Safe Mode with Networking in Windows 7"

Hello,
Does anyone know, how to disable "Safe Mode With Networking" option from Windows 7 boot menu?
Kind Regards
Kalle Reivilä

Hi,
Base on my research, there’s no official method to disable Safe Mode with networking in Windows 7.
Thank you for your understanding.
Regards,
Leo
Huang
Leo Huang
TechNet Community Support
Thank You .This is what I was afraid.
I work at school and We have one problematic classroom. It's http traffic is blocked by a FSecure's firewall, but students have figured out a way. They boot computers to safe mode with networking and after that
they have access to the Internet! Now We have to change Microsofts's own firewall.
Regards,
Kalle Reivilä

2007 Mac Pro will not boot, even in safe mode

Hello,
I have a Mac Pro purchased in 2007 that had been working well up until a few months ago. I had trouble with Microsoft Word 2008 repeatedly crashing; I repaired the hard disk and moved up to Word 2011, and the problem seemed to resolve.
Yesterday, the machine crashed, and I am not able to start it up, even in safe mode. I have tried resetting the SMC and NVRAM/PRAM, removed and cleaned the graphics card (NVIDIA 7300 GT), and removed the 3rd party RAM I installed at least 2 years ago.
When booting to the internal hard drive, the Apple logo will show, then a blue screen followed by a gray screen with a frozen cursor. When I boot to an external hard drive or the OSX Leopard install DVD, the screen flickers like below:
When I tried to boot in safe mode while holding shift + command + V, the safe boot froze after reading:
panic (cpu 2 caller 0x2abf6a): kernal trap at 0x0029a4bc, type 14= page fault, registries:
[4 lines of 2-3 letter acronyms and numbers]
Error code: 0x00000000
I am thinking of buying a new graphics card (ATI Radeon 5700), but I want to be sure (as much as possible) that will solve the problem I am having. Any suggestions would be very much appreciated!
Thank you,
Cheryl

replace the system drive
always clone your system
yes dump the 7300 if you plan to keep using it and use Lion
A clean install would be nice start, on say 120GB SSD or something too
And 2x2GB FBDIMM set is $30 if you need a set
AHT is on your OEM DVD from 20007
dust, temps and air flow is also important

Not Responding Messages in Safe Mode

I've got a Toshiba Satellite and apparently caught a virus a few days ago. I'm trying to do a System Recovery, but no matter what I do, I get a "Not Responding" message. If I am in regular or safe mode it happens. I can put in my recovery disk and it will load, then when the screen comes up, I can't do anything because the message comes up. I will go into safe mode with commands and enter in the proper command, then the screen will come up that way, but still get the "Not Responding". Same happens when I try to run my Spyware sweep. The program will start, but I get the "Not Responding" again.
Any thoughts on how to fix this?
Thanks.
Solved!
Go to Solution.

Seems like you are trying to run the recovery in windows. Boot to the recovery disc instead. Tap F12 when you turn it on. It should go to the boot menu then insert the disk and choose CD/DVD on the menu and it should load the recovery disc. Good luck!

Firefox plug in container has stopped working, even in safe mode with plug ins disabled

My firefox keeps crashing every 5 - 10 minutes. Sometimes I get a windows error message saying "firefox plugin container stopped working", but most times I don't. These are the actions I've taken so far, with no effect:
1. Updated all my plug-ins
2. Run firefox in safe mode with plug-ins disabled
3. Uninstalled and reinstalled firefox
4. Run an AVG scan which turned up nothing
Can anyone offer advice on how to fix this (very annoying) problem?
I've had to write this in IE because firefox wouldn't stay open long enough for me to copy and paste it into the text box.

Try creating a new Profile by following the steps from [[Managing Profiles]] [[Troubleshooting extensions and themes]] and also [[The Adobe Flash plugin has crashed]]

Firefox will not start, even in Safe Mode. Evidence suggests that this is due to an incompatibility with the latest update of Java.

Firefox will not start in WinXP. (I am sending this from an alternate browser.)
I believe that this is due to some incompatibility with the latest update of Java. I believe that one of the tabs from my previous session included a Java application, and this is causing the difficulty. In recent days, since the last update of Java, I have had difficulty in loading linked pages with Java applications into Firefox, and have needed to switch to a different browser to do this.
Now I cannot even start the browser, presumably due to the presence of a Java application on one of the restored tabs.
When I now try to start Firefox, my ZoneAlarm security s/w presents the message "Java(TM) Quick Starter binary is trying to access the Internet." I click "Allow", but Firefox will not start. If I click "Deny", the same result. The same thing happens when I try to start Firefox in Safe Mode, I cannot even start Firefox in Safe mode.
== This happened ==
Every time Firefox opened
== after recent update of Java

You can try to disable the Java Quick starter and the Java Console extension in the Control Panel > Java.
Control Panel > Java > Advanced tab > Miscellaneous >Java Quick Starter (disable)
You can also disable the Java plugin in Firefox: Tools > Add-ons > Plugins
See [[Troubleshooting extensions and themes]]
See [[Troubleshooting plugins]]

Thunderbird will not open, even in safe mode

Recently Thunderbird refused to open on my Windows 7 64 bit pc. I have turned off all antivirus/malware programs, uninstalled with Revo uninstaller and reinstalled Thunderbird, tried to start it in safe mode. I have had task manager open while starting Thunderbird and it does not even appear in the window.
I am close to migrating to Opera. Please help me fix this problem.

AS you have Windows 7 64 bit pc, Thunderbird should have installed in this directory:
* C:\Program Files(x86)\Mozilla Thunderbird\thunderbird.exe
Check the shortcut on desktop is pointing to correct directory:
Right click on Thunderbird shortcut icon and select Properties.
General tab
Under 'Attributes'
Read only and hidden must NOT be selected.
click on 'Shortcut' tab
make sure the 'Target' is this:
"C:\Program Files(x86)\Mozilla Thunderbird\thunderbird.exe"
click on 'Security' tab
make sure your UserAccount name has permission to run TB
click on OK
Make hidden files and folders visible:
The AppData folder is folder is a hidden folder; to show hidden folders, open a Windows Explorer window and choose "Organize → Folder and Search Options → Folder Options → View (tab) → Show hidden files and folders".
Create a folder on desktop called 'TB Backup'
Then create a backup of your Profile name folder.
Locate this directory:
C:\Users\Windows user name\AppData\Roaming\Thunderbird\Profiles\Profile name\
Right click on the profile name - (usually xxxxxxxx.default where the x's are letters and numbers) - select Copy and then Paste this into the Folder called 'TB Backup'.
If you have more than one Profile which you use - copy paste that as well.
Then look for and delete all the contents from these two directories:
* C:\Users\Windows user name\AppData\Roaming\Thunderbird\
* C:\Users\Windows user name\AppData\Local\Thunderbird\
Then click on thunderbird shortcut icon to run Thunderbird.
If this fails:
right click on Thunderbird icon and select 'Run as administrator'
Thunderbird should create a new default Profile.
It will then ask if you want to create mail accounts - do not create mail accounts - exit Thunderbird - it must be closed - this is important..
Locate your saved Profile in the TB Backup folder.
Open the profile name folder and copy all the contents.
Locate the new Profile here:
C:\Users\Windows user name\AppData\Roaming\Thunderbird\Profiles\profile folder name
Paste the copied contents into the profile folder name overwriting all the default files.
As an aid you should be copying the Contents of Profile folder name - see image below as an aid.
then try to restart Thunderbird.
Please report back on results.

Tb not responding, even in safe mode with networking enabled?

Similar Messages

Maybe you are looking for