TB V31.0 SMTP user name has extraneous characters at end causes SMTP login failure
Ubuntu 14.04 LTS with Thunderbird. TB updated recently to V31.0 and SMTP login problems started.
Worked fine before update. ISP BTinternet.com in UK. Removed and reinstalled Accounts and checked and changed passwords in attempt to resolve problem. Web access works fine so account is OK.
TB SMTP Log shows extra characters in SMTP user login name causing login failure. Have deleted SMTP account and recreated but error still there.
Here is an extract from the TB SMTP log. User name is [email protected], but you can see that there are extra characters at the end.
-1492797568[7fe4a5d17580]: trying auth method 0x200
-1492797568[7fe4a5d17580]: SMTP entering state: 16
-1492797568[7fe4a5d17580]: SMTP AuthLoginStep1() for [email protected]@`sÿ£ä
-1492797568[7fe4a5d17580]: PLAIN auth
-1492797568[7fe4a5d17580]: Logging suppressed for this command (it probably contained authentication information)
-1492797568[7fe4a5d17580]: SMTP entering state: 0
-1492797568[7fe4a5d17580]: SMTP Response: 535 invalid user ID or password
-1492797568[7fe4a5d17580]: SMTP entering state: 18
-1492797568[7fe4a5d17580]: SMTP Login response, code 535
-1492797568[7fe4a5d17580]: marking auth method 0x200 failed ..
How to edit the SMTP username string to remove these extraneous characters?
Any help appreciated.
Paul_B
Hi Matt,
Thanks for replaying.
Not that I am aware of. This is ubuntu 14.04 LTS so there is no anti virus software running and no proxy. Straight to my broadband router and out to the wide world.
I'm currently tryinf to trace where the login string is stored to see if I can clean it up there.
Paul B
Similar Messages
-
To find whether User name has SAP log in ID
Dear all
How to check up particular user name has SAP log in ID are notHi,
Go to transation SU01. Drill down on user. Enter the user name & press enter. Check the user id for selected user name & click on Display. If the user has user id in SAP, then system will show the details, otherwise messgae will appear stating that the user id does not exist.
Regards,
Prashant -
I have access to all of the user names on my Macbook, including one of the Admin accounts, that is my wife's. BUT I can't fine mine ANYWHERE. It seems like it all started when I started to clean up my "Startup disk" and deleted just the basic apps I KNOW weren't Mac related.(Like Dropbox, Tom Tom, Google Drive, etc)
I did surf and find and tried Ctrl+S but I'm a little confused on WHEN to enter this option, I tried doing it when restarting it, AND when it powered back up. Notthing.
maybe I'm doing something wrong.
So to recap
I CAN access my Macbook, but ONLY with other user accounts NOT MY OWN AND CAN'T ACCESS ANY OF MY FILES.
Thanks for your help!You might consider upgrading the RAM. 1GB is the bare minimum to run Mac OS X 10.6.8. See this page for RAM information for your Mac: http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.16-whit e-13-mid-2007-specs.html.
You are also running low on free disk space, so consider moving files over to an external drive or delete files you no longer need.
Also, please explain what "done other maintenance" involves. -
Could not connect to DbaaS Service using the given user name and password.
I'm not able to create Java Cloud Service (Oracle Java Cloud - Virtual Image Services) for my newly created Oracle Database Cloud Service instance. It fails with
"Incorrect values entered
Could not connect to DbaaS Service using the given user name and password.
Verify that the user name and password are correct and the user name has SYSDBA privileges."
I'm using SYSTEM user and the password I used during Oracle Database Cloud Service instance creation. I've verified them with sqlplus and also by connecting remotely.
Java Cloud Service wizard doesn't allow me to proceed to instance creation.Hi Alexander,
Maybe you'll find useful the document from Oracle docs specified bellow regarding Creating an Oracle Java Cloud Instance:
http://docs.oracle.com/cloud/latest/jcs_gs/JSCUG/GUID-31F00F2C-221F-4069-8E8A-EE48BFEC53A2.htm#JSCUG3128
Thanks,
Cristiana.
#OracleCloud -
I have my N95 8gb set up with 3 email accounts and they all send and receive just fine.
I have replicated a 3 on my N96 updated and running latest v11 software to find that there appears to be a software problem.
The 'user name' field allows you to enter what looks like at least 40+ character 'user name' however it only saves 30 odd characters - cutting off anything after that when you exit the menu's. (Sometimes jumps back to main front screen)
This is a issue as my user name is 35 characters long.
Anyone else have the same problem; any ideas ?
If anyone at Nokia is reading please can you advise ?
Thx
Northamptonshire, UK. N96-1 RM-247 V20.050.098.1 - 20-03-09For sure people can get confused with user names and email addresses - it does change per provider; sometimes yor email address is the same as your user name and sometimes the two are different.
100% certain the issue exists and needs resolving by Nokia.
(I have experience of setting these settings up many times on various devices - phones, PC's & MAC's - I can set up the account in question on my Nokia N95 8GB, my Nokia 6300 etc etc 1st time every time.
Does not help other then to be certain a fix is needed.
Rgds,
Lee
Northamptonshire, UK. N96-1 RM-247 V20.050.098.1 - 20-03-09 -
Modify Dynamic Prompt Values based on User Name
Hi,
I did some searching for this issue on the forum and could not quite find anyone with the same problem. If I missed something, please except my apologies in advance.
I have created a report within Crystal Reports 2008 with dynamic prompts. The report pulls possible values for the report directly from my database (MS SQL 2005). This works well.
I have deployed the report, with eclipse, under tomcat using the free JRC components provided by SAP.
This is a financial report which allows users to view the budget of a department. Each user will have one or many departments that they should have access to. Not everyone sees the same departmental information. I have a table that contains the user name of each individual and the department code they should have access to.
One of the dynamic parameters I have in the report now lists all department codes. Would it be possible to pass to the report a user name that would limit the listing within the department code parameter to only those departments the user name has access to (as specified in the security table I have setup for this)?
I need to do this within the JRC and not the Business Objects EDGE server. With this in mind, I do not believe I can use any of the RAS components of the JRC.
Thanks, in advance, for any advice or help you may be able to provide,
DaveMoved to Java SDK forum where the JRC is answered.
-
Automatic login in mavericks not working. I still have to enter user name and password
I upgraded the original Hard Drive to SSD drive. After the upgrade, I can no longer automatically log in. I now have to enter my user name and password. I tried resetting automatic login in Users and Groups but it doesn't work in Mavericks.
Hello,
To find out if it's system wide or user specific, try this...
Open System Preferences>Users & Groups, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
Does it work in the new account?
How about these?
Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/
Then Reset your Keychain...
http://support.apple.com/kb/TS1544
https://discussions.apple.com/thread/5225064?tstart=0 -
Can I use user names and password of Microsoft Office Outlook for hyperion
I'm new to Hyperion. Can anyone tell that can I use "user names" and "passwords" of Microsoft Office Outlook for login into hyperion applications.
I'm not talking about single sign on, but want to use same user names and passwords as that in Outlook.
ANy suggestions?That depends on how your Outlook authentication is configured.
Hyperion is generally configured to authenticate against a network directory (NTLM, MSAD or LDAP). I'm not an Outlook expert, but my Outlook user ID and password is almost always my MSAD id and password (I change clients regularly, and it's almost always the same situation). So it's also usually the same as my Hyperion ID and password.
Ask your Outlook administrator whether it uses (or syncs with) MSAD, NTLM or LDAP. If the answer is yes, then you're in good shape because Hyperion can use these as well.
Hope this helps,
- Jake -
TS4268 FaceTime incorrect user name/password
I have just up dated my iPad 3 and iPhone 4 to ios6
When I try to login i get incorrect user name/password in the same time I can login in my account and download applications with same user name and the same passwordAppreciate the links Tom, however none of these helps, I'll explain the issue exactly (should have done that in my first post):
The Facetime and iMessage credentials are valid and work just fine on the Mac, they don't work for some reason on the iPhone and the iPad and this only started happening after upgrading to iOS 6.
I did some digging and found that it was an issue already for some since iOS 6 beta 4 and found many threads online with users facing the same problem.
It seems that for some reason, a "glitch" occured during the upgrade and even restoring the device as new and starting from scratch doesn't help. After having received my other iPhone, I tried, and the issue remains.
I contacted Apple Care and they're on the case from what I've been told but haven't been able to pinpoint the exact cause yet.
I'll post back once I have an update.
Cheers,
Farès -
I have lost the user name and the password and the phone now stopped the end of updating to IOS7
the phone now need user name and password at the end of updating the ios system from 6 to iOS7
what is the solution now and the phone now like a piece of ironHave you tried adding your comcast account using the built in IOS mail app.
If you're using the Comcast Xfinity app, then look at their support site or ask the app developer. -
Get user name - web services throws error if a name has special character
I am calling UserProfileService.asmx web service and using GetUserPropertyByAccountName. The method works for almost everyone except for those who has special characters in the Preferred Name. How do I fix this? We are having serious production issues and
would like to know how to fix the issue.
User: domain\aberg returns name as the name does not have any special characters. Arthur Berg
User: domain\jobill returns following error because this use has a dash in the last name. Joe O-Bill
User: domain\mobrien returns following error because this use has a dash in the last name. Mark O'Brien
<?xml version="1.0" encoding="utf-16"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Body>
<soap:Fault>
<faultcode>soap:Client</faultcode>
<faultstring>A user with the account name DOMAIN\jobill could not be found. ---> An error was encountered while retrieving the user profile.</faultstring>
<detail>
<ErrorCode xmlns="http://microsoft.com/webservices/SharePointPortalServer/UserProfileService">UserCannotBeFound</ErrorCode>
<ErrorMessage xmlns="http://microsoft.com/webservices/SharePointPortalServer/UserProfileService">An error was encountered while retrieving the user profile.</ErrorMessage>
</detail>
</soap:Fault>
</soap:Body>
</soap:Envelope>
I am using codeplex tool "web service studio 2.0" to verify this.I have NO clue what is going on. When I go to user profile from Central Admin the user account is domainxp.net\username. But when I pull up the user using address bar (say in edit form) I see domain\usename. Could this be confusing the workflow which is
calling the web services?
I ran the following powershell and after few minutes it starting to resolve the user name without any errors. I like to know what is going on here. Problem is solved for now but I wont be surprise if I see the same problem after doing a Full AD sync.
$adUser = "domain\user"
$siteCollection = "http://local.site/sales"
Set-SPUser -Identity $adUser -Web $siteCollection -SyncFromAD
Thanks
Brooke -
Mail has stopped sending all email. Says all outgoing servers are offline and server certificate are invalid. Have gone into preferences/accounts/edit SMTP servers and reentered all data including user name and password.
Have had this happen before and had to upgrade to Maverick to cure it.So? What's your problem? BTW, you show SL as the OS, but mention installing Mavs. Very confusing.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2 -
Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off? chessatwork has ran great for me for many yrs, then one day I down loaded firefox and went to play chess on this site chessatwork.com, well the window popped up asking to remember the log in and pass word and so I said ok, and it did, but now when I click log in and I go to my main page (home) and click on any link, say to play game I return right back to log in
See http://kb.mozillazine.org/Deleting_autocomplete_entries<br />
Remove a saved password here: Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
You may also need to remove the cookies from that website.<br />
* Tools > Options > Privacy > Cookies: "Show Cookies" -
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.
I'm NOT in any way a Terminal Services expert and I need help trying to get an application program working in a multi-user environment.
The issue is that the printer changes for every user that is logged in. The application needs to print NOT to the default printer, but to a "special" printer which is selected in the application... let's call it a label printer to simplify the explanation.
You have your default regular printer, easy for the application to find that one, and then you have a special printer that labels get printed onto. The application needs to know what printer is the label printer. So we allow the user to select that in the
application and the selection is stored in a config file in
C:\ProgramData\mfgr\prog\setting files
I don't have access to the application so I can't change how this works.
In the "regular" world, selecting the label printer driver to use should be per machine, NOT per user. When a new user logs into a machine, the physical printer doesn't go "poof" and a new printer suddenly appear. Same printer for all
users.
Yet in terminal services, the physical machine is "merged" with the virtual machine on the server. And there can be many users logged in at the same time. So each users real machine (and real printer) is injected into the "fake" terminal
services machine. The name of the printers is made unique for each user. So the printers DO go "poof" and change names depending on the user logged into terminal services.
So user "A" logs in and sets up the application to print to "LabelPrinterForUserA" (or whatever the name of the printer happens to be), that setting is stored in the ProgramData subfolder, and all is well. Later, user "B" logs
in, and when they print, the application tries to print to "LabelPrinterForUserA" which doesn't exist for user B or is only accessible by user A. If user B re-configures, that breaks it for user A.
SOLUTION 1: The way that /should/ work (in my mind) is that you define one "generic" printer in Terminal Services... call it "Virtual Label printer" and when the user wants to print to it, the print job gets re-directed back to whatever
physical printer is actually connected to their local workstation. There is a map of virtual printer to actual printer depending on the current user. The application is told once to print to "Virtual Label Printer" for all users.
SOLUTION 2: Or... there should be some way to make the ProgramData sub folders separate per user. E.g. when user "A" tries to access:
C:\ProgramData\mfgr\prog\setting files
they actually get
C:\UserData\UserA\AppData\mfgr\prog\setting files
and user "B" gets
C:\UserData\UserB\AppData\mfgr\prog\setting files
So the question I have is: Does either of those solutions exist hidden somewhere in the setup of terminal server? Or is there another way around this issue that I don't know?I don't really have a "for sure" answer to this, but because people here can't seem to deal with a question that hasn't been answered I'll provide the best answer I did receive from ServerFault.com user Nathan:
I can feel your pain with using old software on terminal servers ...the solution I've come up with definitely won't scale as it requires some manual configuration, but I've gotten this method to work with our label printers (which require to be
printed to an LPT port...yep, that old).
Share your USB-connected printers to the network on each machine. Then, have the user log in on aunique session for each of them
(a TS account cannot be shared among computers for this to work) and install a network printer pointing to the USB one they shared. Try to use a DNS name to account for possible DHCP movements.
After, it should work. Each user can do this since display names can be identical as long as the ports are different (which they are).
This was clarified by the following series of comments:
I think you are on to something here, and I originally advised the admin to do this. The problem he ran into is that it setup the printer names in the TS as "printer on usersworkstation"
and he could not rename it except to change the "printer" to whatever. E.g. the "on userworkstation" remained. I believe there is another way of installing the printer which avoids this, but I can't find it. Ages ago, one used to do NET
USE LPT2 \\computer\printer password /USER:domain\user /PERSISTENT:YES and then tell the driver to print to LPT2 – James
Newton Mar
17 at 16:21
@JamesNewton That's actually the exact method we used. The way around the "network printer" part is to install it as local printer and map it to a TCP/IP port that way. – Nathan
C Mar
17 at 16:28
You mean in the case where the printers are TCP/IP connected and not local USB / LPT to the users workstation? That makes sense. Wonder if this will work for USB connected printers... – James
NewtonMar
17 at 16:35
@JamesNewton You'd share the local printer on the client's PC then on the server connect via TCP/IP to it. You'd need static addresses or use DNS names if DHCP, though. – Nathan
C Mar
17 at 16:51
Ah. Yes. I see. Looks like the LPT thing should work even with a USB connected printer:superuser.com/questions/182655/… – James
Newton Mar
17 at 17:09
Maybe you are looking for
-
Error while Using RequestResponseBean Module
hi All, I am trying to use RequestResponseBean Module in one of the scenario as given in these links: http://wiki.sdn.sap.com/wiki/display/XI/UsingRequestResponseBeanModuleinFILE+Adapter http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File(Without%2
-
Using Firefox, I can login and browse my financial institution website (NFCU) but I cannot pay bills. When I click the bill pay tab, the tab loads about 66% and then hangs (loading). I have let it load until NFCU asks me if I want to cancel the sessi
-
TM Network Backups Freezing up Host computer....
In my workgroup we have set up a 10.6 Mac Mini as a network backup for several other macs. There's three of us backing up our 10.6 Macs to a RAID1 array connected to the Mini via Firewire. Everything works great as long as the Mini is available, but
-
Hallo. I have the following problem. An XML file, encoded in ISO8859-2, should be presented in a table in a browser's window. The file is "one level deep", something like: <type>animal</type> <name>cat</name> <type>insect</type> <name>ant</name> ...a
-
Hi I cannot seem to get OWB to recognise the Oracle Workflow install in our database. Workflow has been in stalled into a schema called OWF_MGR and when I look in there I seen all the expected tables and AQ's so I have no reason to doubt the install.