Tbird 31.2.0 - installing Lightning, will not complete the install after Tbird restart
Using W-XP SP3, Tbird 31.2.0, latest Lightning download. Install apparently OK, got msg "Lightning will be installed after you restart Tbird". Clicked restart, Tbird restarts but Add-Ons tab still shows msg "Lightning will be installed after you restart Tbird". Tried restarting Windows, same result. Tried installing Lightning using the cog and pointing to the xpi file, same outcome.
Try starting windows in safe mode. I am guessing your anti virus or other security software simply does not like the updated version number and is blocking the launch. Windows safe mode leaves almost all that stuff unloaded and will confirm or prove me just plain wrong.
Similar Messages
-
the progress bar on the Yosemite installation is stuck about a third in. Has not moved for eight hours. This is a brand new computer. Has any one had this problem. I can't contact Apple online support as they need a serial number. I can't get the serial number because my computer doesn't work now!
Look at the bottom of the MBP. There should be the serial number in very small print.
http://support.apple.com/kb/HT1559
Ciao. -
I have a pc that is one year old and the hard drive is crashing we use it only for quick books to run our small business I would like to buy a macmini and install the OS from the pc to the apple product i will not use the pc after, can i use the OS off the pc or do I have to purchase another?
I think you can get Windows 7 for around $99. Install the 64bit version as the 32bit version will not be able to use all your new computer's ram if you have more than about 3.5gb.
Back up your quick books data now before the old hard drive dies. You can copy your data over to your new installation of Windows and quick books.
By the way, there is quick books for Mac http://quickbooks.intuit.com/mac/?sc=BNR-000-COR-quickbooks&priorityCode=4902000 000&cid=ppc_google_QB-Intuit-Core-Brand-Mac_quick-books-for-mac_exact&site=&ad_i d=9347918288&raw_keyword=quick%20books%20for%20mac
So you may not need to install Windows at all. -
When I try to install WinXP using bootcamp, the iMac will not recognize the CD after it has already read all the information and is ready to begin installation. What is the problem?
If your on 10.6.8 like you should be for security/stability updates, somewhere along the line a later Bootcamp version was issued and only supports Win 7.
You can read my post here for a alternative solution, running a virtual machine software
https://discussions.apple.com/thread/3772839?tstart=0 -
My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs, then the machine shuts down and restarts. This sequence will repeat seemingly forever unless I shut it down manually.
I upgraded to Yosemite from Mountain Lion a couple months ago, skipping Maverick completely, and I've done any associated updates that Apple told me about. I don't recall which version of Yosemite I have, but I'm sure it is the "latest and greatest".
I've tried re-starting in Safe Mode / Safe Boot and that does the same thing as described above except without the endless restarts. Instead of restarting at some point, SafeBoot proceeds to the white screen and then it hangs until I restart it manually. (I've waited as long os 20-30 minutes with no response).
When I tried the option-command-p-r key combo I never get any chimes or other noises besides the original 1 time boot sound that you would expect to get when starting up a macbook pro.
I was using the mac quite normally (meaning I was doing work I normally do on it and there was no indication of anything wrong) immediately prior to this happening.
The machine is BootCamp(ed) with Windows 8.1 which I use from a VMWare virtual machine instead of natively so that I can have both OSes running at the same time. I also think this is unrelated to my problem. I have been using this setup for more than 2 years.
My upgrade to Yosemite was uneventful and I thought it went well and was very smooth. I don't want to lead attention away from Yosemite, but at this point my problem does not seem related to the upgrade.
Any help is appreciated.Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
When installing the new update 9.0.7 to iMovie either via a dmg file or from the software updater the install will not complete the installation. The indicator bar just stays in the same place with the note install time remaining about a minute. I have let it set for hours and nothing happens. Does anybody have any advice?
Try this.
After signing into the Mac App Store (MAS) with your iTunes Apple ID, look at the Purchased page. You should see the three bundled iLife apps listed with Accept buttons. After you have accepted them and Apple has verified that they came on a new Mac and assigned them to your Apple ID and iTunes/MAS account, you should be able to update them. -
My mac hung up while installing an update. It took hours and still did not complete the update. I restarted my mac. Upon turning it back on, a wheel has been spinning on a grey screen. I tried to reinstall OS X from utilities, but encounter an error. What do I do?
Hey Manaskala,
First point of call on all grey screen issues is the following:
http://support.apple.com/kb/TS2570
Given this issue has appeared after a software update, I'd advise you do the following instead though:
1. Get an external hard drive, with enough space to put the entire hard drive of your Mac onto. Make sure you've safely copied any data you have off of it, as the next step will erase it.
2. In the recovery HD of your machine, use Disk Utility to format you EXTERNAL hard drive with the partition table as GUID, and the format as Mac OS Extended (Journaled).
3. Get out of Disk Utility, and click Reinstall Mac OS X.
4. When asked where, choose to install onto your external hard drive.
5. When the download and installation is complete, your Mac will reboot into a clean fresh setup screen. Make your user account an administrator, and make up a name and password; I use 'Test' and 'test'.
6. Your machine is now running from the external hard drive, not the internal hard drive, so don't be alarmed when you don't see your files.
7. Open the finder, you should see 'Macintosh HD' in the sidebar. This is the internal hard drive of your computer.
8. Open Macintosh HD, and copy out the following folders into a new folder on your desktop:
-Users.
-Applications.
-Library. (This only needs to be done if you use 3rd party software that saves things in the /Library, do a quick google and see if it does e.g. Photoshop, Protools).
9. When these have copied (it'll take quiet a while), you can now use Disk Utility to erase your hard drive. Don't erase Macintosh HD but the ENTIRE hard drive on the inside of your Mac, and as Thomas A Reed mentioned, there was likely an existing issue on your HDD so please go to Security Options and choose 'Zero Out' before clicking erase. This will rebuild the partition table which was a possible cause of the failed update.
10. Reboot the machine holding 'Option', go to recovery HD.
11. Choose 'Reinstall Mac OS X', this time onto your INTERNAL hard drive.
12. When this is complete, make another admin user called test and password test, like you did last time.
13. Run Software Update from the menu of your Mac.
14. In the Finder, you should see your external Hard Drive. open it up, inside that you should see your desktop etc, and on the desktop will be your folder containing Library, Applications and Users.
15. Go to Finder up next to the and choose File -> New Finder Window.
16. In your second finder window, open up Macintosh HD (through the Go -> Computer menu), and go to your Users folder.
17. Open the Users folder in your first finder window, and copy your user folder (has your name on it) into the second user folder (the one inside Macintosh HD).
18. This might take a while.
19. When complete, go to System Preferences -> Users and Groups and unlock the padlock.
20. Click the '+' sign, and make a new administrator user.
21. Now, the fun bit. Note the name of your user folder you copied, e.g. 'Nathan', containing all of your stuff. Note the difference between your user folder (has your name on it) and the Users folder (contains YOUR user folder, guest folder and shared folder).
22. Make the ACCOUNT NAME of your new adminstrator user the EXACT name of your user folder (normally lower case and without spaces), this is case sensitive folks. Your full name can be whatever you want, usually your full name.
23. Then click create. You should be informed that a home folder with that name in it already exists in the Users folder, would you like to make your new account from that folder? say YES!
24. When this is complete, log out of the Test user, log into your new account we've just made, all your stuff should be there.
25. ???????
26. Profit.
There's a few little bits that may need to be cleaned up afterwards, applications folder from your external hard drive should replace the applications folder on your internal hard drive, if the previously mentioned /Library folder contained important goodies then that should replace the /Library folder on your new Mac.
Hopefully that will help you out, straight after that is done make sure your stuff is there, erase your external hard drive and turn on time machine! -
My iPad 2 will not complete the download of software upgrade 6.1.2?
Hi. My iPad 2 will not complete the download and install of the iso 6.1.2 software upgrade to fix the calendar exchange that is draining battery. It goes through the process and then just says there is an error but does not indicate the error. Any ideas gratefully accepted.
Also I don't know if it is connected but it also will not download new apps or iBook I purchased. Please assist if you can.Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off the router and then power it back on
- Reset network settings: Settings>General>reset>Reset Network Settings. You will have to rejoin all networks -
Firefox will not complete the installation even after several attempts of rebooting the computer.
I downloaded the Firefox 9.0.1 upgrade but it will not complete the installation on my computer. Everytime I try to remove the program, it tells me to reboot the computer to finish the installation. After several reboots, the same error keeps coming up.
Try to run the Firefox program once as Administrator (right-click firefox.exe: Run as Administrator).
If that doesn't solve the problem then remove the Firefox program folder (C:\Program Files\Mozilla Firefox\) to do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
Do I have to buy a new scanner? It seems so close to working correctly.
I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
ThanksI have same issue - have you solved this yet?
-
My time machine will not complete the back up. It tells me that my sparsebundle is alreay in use. I currently have imac ungraded my sofeware to the latest. What do I do to correct this?
Try here...
The Backup disk image ... sparsebundle ... is already in use.
From Pondini’s excellent Information Here...
http://pondini.org/TM/Troubleshooting.htm -
I just bought a new iPad min and it will not complete the initial up its been hooked up to me computer 2 days no results how can i send a photo of what it is doing apple almost complete white bar but won't go 100% ?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
My iPhone 4S will not complete the sync process with iTunes. It hangs up on Step 3 of 6 (preparing to sync). Prior to trying to sync the iPhone I updated iTunes. Any suggestions?
I've already tried unplugging the iPhone and restarting my computer - twice.
-
My I phone 4 will not complete the backup to i cloud.
My I phone 4 will not complete the backup to i cloud.
Try deleting your last backup by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, swipe across your backup and tap Delete, then go back and turn iCloud Backup back on again. If it still won't back up, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
-
My iPhoto app will not complete the installation of an update
My iPhoto app will not complete the installation of an update.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off the router and then power it back on
- Reset network settings: Settings>General>reset>Reset Network Settings. You will have to rejoin all networks
Maybe you are looking for
-
Repair permissions - always the same ones need repairing (Shockwave)
Each time I do a Repair Permissions after doing an installation (in this case Security 008 update for Intel on my MBP) the same permissions always are repaired and ONLY these. Here's the report I always get: Permissions differ on ./Library/Applicatio
-
Capitalization of cwip- Business area posting
Dear All, We are capitalizing assets through Internal Orders. The orders are created with respective business area wise and business area has given in the order. At the period end process While execution of Ko8G the system is posting corrects FI ent
-
HTTP GET binding - WSDL - CodeGen - ClientStub
Hi, I've got a WSDL containing an HTTP GET binding. Is there a code generator, which is able to handle such a binding as well as creating a client-stub out of it? I tried the Axis2 Eclipse CodeGen PlugIn, which didn't complain but the final service c
-
I use ubuntu. The computer ran out of battery power and closed whilst I was using thunderbird. On restarting thunderbird later, I found that I could not open any folders or send any unsent messages. When I close the programme, I cannot restart it bec
-
Pages with many text hyperlinks are very slow
When making a text list, where a lot of the words are hperlinks, the resulting age is very slow with loading. Also, especially when not using Safari, the screen is garbled with text until the complete page is loaded. It looks like all those simple te