TBridge must have at least one redirect command error!

Hi there,
Possibly this is a very dork question!, sorry I can't find the trick.
We are connecting Tux8.0 and WLS7.0sp1 through WTC. and the following error is
showed when trying to deployed WTCServer component. in the log file attached is
showed that connecction is successfully established and the problem comes with
Tbride.
Any suggestions really very welcomed!
Config info:
<WTCServer Name="WTCServer" Targets="cfeserver">
<WTCImport LocalAccessPoint="BEA2"
Name="WTCImport-1044988984998"
RemoteAccessPointList="S74DEMO" RemoteName="QUERYSAP"
ResourceName="QUERYSAP"/>
<WTCImport LocalAccessPoint="BEA2"
Name="WTCImport-1044989017524"
RemoteAccessPointList="S74DEMO"
RemoteName="QUERYSICOM" ResourceName="QUERYSICOM"/>
<WTCLocalTuxDom AccessPoint="BEA2" AccessPointId="BEA2"
ConnectionPolicy="ON_STARTUP"
NWAddr="//16.179.26.99:6550"
Name="WTCLocalTuxDom-1044988580045"/>
<WTCRemoteTuxDom AccessPoint="S74DEMO"
AccessPointId="S74DEMO"
ConnectionPolicy="ON_STARTUP" LocalAccessPoint="BEA2"
NWAddr="//16.179.20.132:6540"
Name="WTCRemoteTuxDom-1044988657236"/>
<WTCResources FldTbl32Classes="fmls.cfemsgflds"
Name="WTCResources-1044989048309"/>
<WTCtBridgeGlobal
JmsFactory="weblogic.jms.ConnectionFactory"
JndiFactory="weblogic.jndi.WLInitialContextFactory"
Name="WTCtBridgeGlobal-1044989083549"
Transactional="NO"
TuxFactory="tuxedo.services.TuxedoConnection"
WlsErrorDestination="weblogic.jms.errorqueue">
<WTCtBridgeRedirect Direction="JmsQ2TuxS"
Name="WTCtBridgeRedirect-1044989289125"
ReplyQ="weblogic.jms.replyq"
SourceAccessPoint="BEA2"
SourceName="weblogic.jms.ConsultaPedido"
TargetAccessPoint="S74DEMO"
TargetName="QUERYSAP" TranslateFML="FLAT"/>
</WTCtBridgeGlobal>
</WTCServer>
Error:
<Feb 11, 2003 12:31:11 PM CST> <Notice> <WebLogicServer> <000365> <Server state
changed to RUNNING>
<Feb 11, 2003 12:31:11 PM CST> <Notice> <WebLogicServer> <000360> <Server started
in RUNNING mode>
<Feb 11, 2003 12:50:41 PM CST> <Error> <WTC> <180047> <tBridge must have at least
one redirect command>
<Feb 11, 2003 12:50:41 PM CST> <Error> <WTC> <180115> <tBridge cannot parse the
configuration MBeans: Failure: no tbridge redirect info defined>
[wtcdebug.txt]

Mauricio,
I think this is an old console error in creating this mbean. The
WTCtBridgeRedirect
is mistakenly defined under the scope of the WTCtBridgeGlobal mbean
where it should be at the same level(ie a child of the WTCServer mbean).
The WTCService expects to find it as a child of the WTCServer mbean and
throws the exeption when it doesn't see it.
I think the fix is to edit the config.xml and move the termination for
WTCtBridgeGlobal("</WTCtBridgeGlobal>") to before the declaration
of the WTCtBridgeRedirect.
Bob Finan
Mauricio Del Moral wrote:
Config info:
WTCServer Name="WTCServer" Targets="cfeserver">
<WTCImport LocalAccessPoint="BEA2"
Name="WTCImport-1044988984998"
RemoteAccessPointList="S74DEMO" RemoteName="QUERYSAP"
ResourceName="QUERYSAP"/>
<WTCImport LocalAccessPoint="BEA2"
Name="WTCImport-1044989017524"
RemoteAccessPointList="S74DEMO"
RemoteName="QUERYSICOM" ResourceName="QUERYSICOM"/>
<WTCLocalTuxDom AccessPoint="BEA2" AccessPointId="BEA2"
ConnectionPolicy="ON_STARTUP"
NWAddr="//16.179.26.99:6550"
Name="WTCLocalTuxDom-1044988580045"/>
<WTCRemoteTuxDom AccessPoint="S74DEMO"
AccessPointId="S74DEMO"
ConnectionPolicy="ON_STARTUP" LocalAccessPoint="BEA2"
NWAddr="//16.179.20.132:6540"
Name="WTCRemoteTuxDom-1044988657236"/>
<WTCResources FldTbl32Classes="fmls.cfemsgflds"
Name="WTCResources-1044989048309"/>
<WTCtBridgeGlobal
JmsFactory="weblogic.jms.ConnectionFactory"
JndiFactory="weblogic.jndi.WLInitialContextFactory"
Name="WTCtBridgeGlobal-1044989083549"
Transactional="NO"
TuxFactory="tuxedo.services.TuxedoConnection"
WlsErrorDestination="weblogic.jms.errorqueue">
<WTCtBridgeRedirect Direction="JmsQ2TuxS"
Name="WTCtBridgeRedirect-1044989289125"
ReplyQ="weblogic.jms.replyq"
SourceAccessPoint="BEA2"
SourceName="weblogic.jms.ConsultaPedido"
TargetAccessPoint="S74DEMO"
TargetName="QUERYSAP" TranslateFML="FLAT"/>
</WTCtBridgeGlobal>
</WTCServer>
Error:
<Feb 11, 2003 12:31:11 PM CST> <Notice> <WebLogicServer> <000365> <Server>state
changed to RUNNING>
<Feb 11, 2003 12:31:11 PM CST> <Notice> <WebLogicServer> <000360> <Server>startedin
RUNNING mode>
<Feb 11, 2003 12:50:41 PM CST> <Error> <WTC> <180047> <tBridge must have at least
one redirect command>
<Feb 11, 2003 12:50:41 PM CST> <Error> <WTC> <180115> <tBridge cannot parse the
configuration MBeans: Failure: no tbridge redirect info defined>
[att1.html]

Similar Messages

Bursting Error : ZIP file must have at least one entry

Hai All,
I am trying to Burst report in 11.5.10.2 instance. When tried bursting it the it got the following error.
XML Publisher: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
Current system time is 04-JUN-2009 12:40:16
XML/BI Publisher Version : 5.6.3
Request ID: 387463
All Parameters: ReportRequestID=387460:DebugFlag=Y
Report Req ID: 387460
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:ERP
Preparing parameters
null output =/d02/appluat/uatcomn/admin/out/UAT_erp/o387463.out
inputfilename =/d02/appluat/uatcomn/admin/out/UAT_erp/o387460.out
Data XML File:/d02/appluat/uatcomn/admin/out/UAT_erp/o387460.out
Set Bursting parameters..
Temp. Directory:/tmp
[060409_124018651][][STATEMENT] Oracle XML Parser version ::: Oracle XDK Java 9.0.4.0.0 Production
[060409_124018653][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=387460, user-variable:cp:language=en, user-variable:cp:responsibility=50352, user-variable.OA_MEDIA=http://erp.adgs.ae:8030/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=387460, user-variable:cp:locale=en-US, user-variable:cp:user=GVU, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=387463, user-variable:cp:org_id=103, user-variable:cp:reportdescription=Pension Fund}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
--Exception
ZIP file must have at least one entry
java.util.zip.ZipException: ZIP file must have at least one entry
     at java.util.zip.ZipOutputStream.finish(ZipOutputStream.java:292)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:534)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:292)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
Can anyone please help me on this..
Regards

Pl help me is there any way to overcome this error, when supplier email address is present then , bursting file works fine, if supplier address is null , then it is giving me error , please find the error also.........
Bursting XML File ...........
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:request select="/XXDBD_POPRPOP_SA/LIST_G_INIT_INFO/G_INIT_INFO/LIST_G_HEADERS/G_HEADERS">
<xapi:delivery>
<xapi:email server="mailgate.XXX.com" port="25" from="[email protected]">
<xapi:message id="emailpo" to="${CP_VENDOR_EMAIL}" cc="[email protected],[email protected]" attachment="true"
subject="Purchase Order No: ${POH_PO_NUM}">
Please find attached PO ${POH_PO_NUM}.
Regards,
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="Purchase Order ${POH_PO_NUM}" output-type="pdf" delivery="emailpo">
<xapi:template type="rtf" location="xdo://XXDBDPO.XXDBD_POXPRPOP_SA1.en.US/?getSource=true" filter=".//G_HEADERS[CP_VENDOR_EMAIL !='']"></xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
ERROR Generated from bursting file ............Pl help me...........its urgent .............
XML/BI Publisher Version : 5.6.3
Updating request description
Retrieving XML request information
Preparing parameters
Set Bursting parameters..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=529232, user-variable:cp:language=en, user-variable:cp:responsibility=20707, user-variable.OA_MEDIA=http://usncx054.XXX.com:8015/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=N, user-variable:cp:parent_request_id=529232, user-variable:cp:locale=en-US, user-variable:cp:user=RAJULAT, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=529233, user-variable:cp:org_id=84, user-variable:cp:reportdescription=DBD Printed Purchase Order Report English, user-variable:cp:Dummy for Data Security=Y}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
--Exception
ZIP file must have at least one entry
java.util.zip.ZipException: ZIP file must have at least one entry
at java.util.zip.ZipOutputStream.finish(ZipOutputStream.java:304)
at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:534)
at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:292)
at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Thanks

Query SQL code gets deleted after export to Excel. "Query must have at least one destination field"

Hi all,
I'm getting really frustrated by this Access error. It happens when I export the result of a query through an Access macro to Excel, the first time it runs well but the next time, there is a chance that the query won't run and the error "Query
must have at least one destination field" will be displayed. After that, I try to check the query SQL code and discover the code has vanished. I'm using simple Select query without joins, only "where", "group by" and "order by"
statements.
Thank you in advance for your help,
Jesus
Edit:
One of these queries are like the following (all of them are of this type):
SELECT Field1, field2, field3, field4, field5, Sum(Field6) AS SumOfField6, Sum(Field7) AS SumOfField7
FROM Table1
WHERE Field6 is not null
GROUP BY Field1, field2, field3, field4, field5
Order By Sum(Field6) desc

Hi Peter,
Thank you for your response, I updated the original question with one of the codes.
Thanks,
Jesus

FRM-30100: Block must have at least one primary key item.

Hi,
I am customizing a form in 6i. I added one database column to one block using data block wizard. Form Compiled successfully. But when I compile the form in Unix, it compiled the form and created the .fmx file but gave the below error.
FRM-30100: Block must have at least one primary key item. Can you please help me what needs to be done to fix this.
Thanks,
HC

Please see if these docs help.
Troubleshooting: FRM-30085 [ID 783768.1]
Basing a Block on a Stored Procedure - Sample Code [ID 66887.1]
Thanks,
Hussein

CHILD form error FRM-30100: Block must have at least one primary key item.

Hi friends,
I have increased the DML array of the child block from 1 to 10, but it throws me error:
FRM-30100: Block must have at least one primary key item.
Block: CEC_ADJUSTMENT_RECON
Form: CEC_ADJ
FRM-30085: Unable to adjust form for output.
How does a form know that the table does not have primary key? Is it referring to it?
Thanks a lot

I dont understand why do you increase the DML array size..
Because it says in the HELP
Specifies the maximum array size for inserting, updating, and deleting records in the database at one time.
A larger size reduces transaction processing time by reducing network traffic to the database, but requires more memory. The optimal size is the number of records a user modifies in one transaction.
The FRM-30100 comes not because of the above property..
If your query data source type is other than TABLE, it is a must to set at least one database field's PRIMARY KEY ITEM PROPERTY in the block to be a YES.

ZipException: ZIP file must have at least one entry

When I place a security constraint on jar files in a Tomcat server to prevent unauthenticated access to the jar files
<security-constraint>
<display-name>Security Constraint</display-name>
<web-resource-collection>
<web-resource-name>ee</web-resource-name>
<url-pattern>*.jnlp</url-pattern>
<url-pattern>*.jar</url-pattern>
</web-resource-collection>
our jnlp applications can no longer download the needed jar resources and I get the following exception. ( It works fine when I take jar files out of the security-constraint list.) Any suggestions on why this is happening and how to get this to work?
Thanks.
java.util.zip.ZipException: ZIP file must have at least one entry
     at java.util.zip.ZipOutputStream.finish(Unknown Source)
     at java.util.zip.DeflaterOutputStream.close(Unknown Source)
     at java.util.zip.ZipOutputStream.close(Unknown Source)
     at com.sun.deploy.net.HttpDownloadHelper.download(Unknown Source)
     at com.sun.deploy.cache.Cache.downloadResourceToTempFile(Unknown Source)
     at com.sun.deploy.cache.Cache.downloadResourceToCache(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.javaws.LaunchDownload$DownloadTask.call(Unknown Source)
     at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
     at java.util.concurrent.FutureTask.run(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

What am i missing here???
ZipOutputStream zos = new ZipOutputStream(new FileOutputStream("out.zip"));
void goDir(String dirName) {
File dirObj = new File(dirName);
if (dirObj.exists() == true) {
if (dirObj.isDirectory() == true) {
// create an array of File objects
File[] fileList = dirObj.listFiles();
for (int i = 0; i < fileList.length; i++) {
if (fileList.isDirectory()) {
goDir(fileList[i].getPath());
else if (fileList[i].isFile()) {
goZip(fileList[i].getPath());
} // loop
else {
else {
void goZip(String filePath) {
try {
FileInputStream fis = new FileInputStream(filePath);
BufferedInputStream bis = new BufferedInputStream(fis);
ZipEntry fileEntry = new ZipEntry(filePath);
zos.putNextEntry(fileEntry);
byte[] buff = new byte[1024];
int len;
while ( (len = bis.read(buff)) > 0) {
zos.write(buff, 0, len);
zos.closeEntry();
bis.close();
catch (java.io.IOException ioe) {
ioe.printStackTrace()

Erro in bursting ZIP file must have at least one entry

Hi All ,
i am using bursting utility for xmlp report ,but getting the following error
--Exception
ZIP file must have at least one entry
java.util.zip.ZipException: ZIP file must have at least one entry
     at java.util.zip.ZipOutputStream.finish(ZipOutputStream.java:304)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:534)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:292)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
i have no clue y this error is coming ,any hint would be very helpful,
Thanks in advance
thanks
Pratap

Hi All
i got resolved this error (Erro in bursting ZIP file must have at least one entry) ,was doing very silly mistake i was using the template name instead of Data Definition code name in location string
location= ' '
so the ZIP file error is removed ,now getting one more error after this ,which i am not able to under stand
--Exception
/tmp/011211_023243126/xdo1_164902_2.pdf (No such file or directory)
java.io.FileNotFoundException: /tmp/011211_023243126/xdo1_164902_2.pdf (No such file or directory)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at java.io.FileInputStream.<init>(FileInputStream.java:66)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:532)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:299)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
Please help me on this
Thanks
Pratap

Crashing on Startup: Assert: "WebFontData must have a least one variation"

No matter what web site I try to open, Muse gives me the following:
Adobe Muse will now shutdown.
Assert: "WebFontData must have a least one variation"
Can anybody tell me what this means and how to fix? Thank you! Stranded until I can get back to work!
Message was edited by: Corey@Adobe (added error to title)

The issue is related to changes made in the TypeKit service. The Muse engineering team is actively working with the Typekit team to resolve the issue.
We apologize the for inconvenience and I will update the forum as soon as the problem is resolved.
Best regards,
Corey

Assert: "WebFontData must have a least one variation"

After installing the newest version of Adobe Muse, every time I open up one of my saved sites a dialogue box comes up and says:
Adobe Muse will now shutdown.
Assert: "WebFontData must have at least one variation."
Thank you
Message was edited by: Corey@Adobe (added full error to title)

In order to avoid duplication, please refer to the following forum topic for updates on this issue:
Crashing on Startup: Assert: "WebFontData must have a least one variation"
http://forums.adobe.com/message/4681876
Best regards,
Corey

(0, 0) Activity 'ID463' validation failed: An IfElseActivity must have at least one child of type IfElseBranchActivity.)

i have the following workflow inside SharePoint designer:-
but when i tried publishing the workflow i got the following error:-

Hi John,
Designer workflow doesn't accept multiple Else If conditions. Modify the workflow to have 'If - Else If' and then try to publish. In other words 'If' condition should have only one 'Else If' condition.
Note:
after modifying the workflow, save and close the designer. Clear the cache at the following folders and then open designer and publish the workflow.
C:\Users\loggedin-id\AppData\Roaming\Microsoft\SharePoint Designer\ProxyAssemblyCache OR   %AppData%\AppData\Roaming\Microsoft\SharePoint
Designer\ProxyAssemblyCache<o:p></o:p>
C:\Users\loggedin-id\AppData\Local\Microsoft\WebsiteCache   OR
    %AppData%\ AppData\Local\Microsoft\WebsiteCache
C:\Users\loggedin-id\ Roaming\Microsoft\Web Server Extensions\Cache   OR    %AppData%\Roaming\Microsoft\Web
Server Extensions\Cache
Thanks
Senthu
Please mark as 'Answer' if it resolves your query or 'Vote' if its helpful
so how i am going to write this ? i though adding multiple If-else will work inside SharePoint designer.. so how i should chnage my workflow, not sure , as i have three different if statements??

5007 an actionscript file must have at least one externally visible definition

Hi,
I am quite new to Adobe Flash professional, and I am trying to edit a FLA file.
after edition I try to publish it to the same directory, and I just published it swf as I dont need the html file.
it keeps showing the above error and when I play my published new swf it keeps blinking!
does anyone know what is the problem?
Thanks

At the minimum, .as file should have below code to publish as document class.
package
                import flash.display.MovieClip;
                public class ClassName extends MovieClip
                                public function ClassName()
                                                // constructor code

How to make this query executable in SSRS: The query cannot be prepared: The query must have at least one axis.

WITH
MEMBER [FYDay].[DateHierarchy].[CurrentDay] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[PreviousDay] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .PREVMEMBER }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay1] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(1) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay2] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(2) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay3] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(3) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay4] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(4) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay5] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(5) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay6] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(6) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay7] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(7) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[PTD] AS AGGREGATE(PERIODSTODATE([FYDay].[DateHierarchy].[FPERIOD],
[FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014]
), [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[WTD] AS AGGREGATE(PERIODSTODATE([FYDay].[DateHierarchy].[FWEEK],
[FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014]
), [Measures].CURRENTMEMBER)
SELECT
[FYDay].[DateHierarchy].[WTD],
[FYDay].[DateHierarchy].[PTD],
[FYDay].[DateHierarchy].[PreviousDay],
[FYDay].[DateHierarchy].[CurrentDay],
[FYDay].[DateHierarchy].[CurrentDay1],
[FYDay].[DateHierarchy].[CurrentDay2],
[FYDay].[DateHierarchy].[CurrentDay3],
[FYDay].[DateHierarchy].[CurrentDay4],
[FYDay].[DateHierarchy].[CurrentDay5],
[FYDay].[DateHierarchy].[CurrentDay6],
[FYDay].[DateHierarchy].[CurrentDay7]
} ON COLUMNS,
[Measures].[Store Budget],
[MEASURES].[SNAPSHOTSOLDAMOUNT],
[MEASURES].[SHIPPEDAMOUNT],
[MEASURES].[SHIPPED VS SOLD],
[Measures].[% To Budget]
{[STOREMASTER].[SERVICINGDC].[SERVICINGDC].ALLMEMBERS}
)} ON ROWS
from ( select {[STOREMASTER].[SERVICINGDC].&[Houston]} on columns
FROM [Model]

Hi Ramparasad,
In your query, you add a measures and dimension on Row axis which is not supported in query designer in SSRS. Please use the query below.
WITH
MEMBER [FYDay].[DateHierarchy].[CurrentDay] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[PreviousDay] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .PREVMEMBER }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay1] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(1) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay2] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(2) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay3] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(3) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay4] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(4) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay5] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(5) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay6] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(6) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay7] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(7) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[PTD] AS AGGREGATE(PERIODSTODATE([FYDay].[DateHierarchy].[FPERIOD],
[FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014]
), [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[WTD] AS AGGREGATE(PERIODSTODATE([FYDay].[DateHierarchy].[FWEEK],
[FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014]
), [Measures].CURRENTMEMBER)
SELECT
[Measures].[Store Budget],
[MEASURES].[SNAPSHOTSOLDAMOUNT],
[MEASURES].[SHIPPEDAMOUNT],
[MEASURES].[SHIPPED VS SOLD],
[Measures].[% To Budget]
}ON COLUMNS,
{ [FYDay].[DateHierarchy].[WTD],
[FYDay].[DateHierarchy].[PTD],
[FYDay].[DateHierarchy].[PreviousDay],
[FYDay].[DateHierarchy].[CurrentDay],
[FYDay].[DateHierarchy].[CurrentDay1],
[FYDay].[DateHierarchy].[CurrentDay2],
[FYDay].[DateHierarchy].[CurrentDay3],
[FYDay].[DateHierarchy].[CurrentDay4],
[FYDay].[DateHierarchy].[CurrentDay5],
[FYDay].[DateHierarchy].[CurrentDay6],
[FYDay].[DateHierarchy].[CurrentDay7]
{[STOREMASTER].[SERVICINGDC].[SERVICINGDC].ALLMEMBERS}
} ON ROWS
from ( select {[STOREMASTER].[SERVICINGDC].&[Houston]} on columns
FROM [Model]
Regards,
Charlie Liao
TechNet Community Support

Trying to change country but keep getting "You have at least one incomplete pass. Passes must be completed before you change stores" How do i complete passes

Trying to change country but keep getting "You have at least one incomplete pass. Passes must be completed before you change stores" How do i complete passes

I have the same problem. I found the passes page but it does not show how to complete the passes.
BTW This is ridiculous. All I did was click an itunes link to an song I heard on a website and iTunes said, "This artist is in not in your countries iTunes store. Would you like to switch to another store to purchase?" I clicked yes and now I can't upgrade my apps, I can't switch back, I can't do anything.
Things I've tried:
• Turning on / off email notifications and clicking save.
• There is nothing else I can do on this page.

"must choose at least one" validation in dataTable?

Hello, group,
How do you validate a set of checkboxes, one per table row, in which the user must select at least one?
We have a page containing a dataTable, each row of which represents an object, one of whose attributes is "active". Our requirement is that at least one object must be selected as "active" by the user.
How do we validate this?
I'm considering the following:
(1) Put a validator on each checkbox that simply increments a count in a request-scoped bean if the checkbox is checked (and always returns success).
(2) Put a validator on a hidden field at the bottom of the form that requires the count be greater than zero.
Is there a better way? (Will this even work at all? :) )
Thanks.
John.

Looks interesting, thank you very much.
I would actually need the multiple row selector, I think, since the requirement is at least one. I see there's no "validator" attribute, but I assume we could just hang a f:validator off of it (or write our attribute and submit a patch!).
That jenia component set looks good for some other requirements we have.
John.

Burn CD: must contain at least one track-error

In Waveburner, when I click burn CD I get an error: "A project must contain at least one track"
I selected 8 tracks in my saved project and clicked Burn CD. I did the same unselected.
I get the same error every time. Why?
W.W.

Thank you kcstudio for responding.
In the meantime I figured out why I was getting this error. Although I don't understand why I even got this.
The existing 8 tracks I imported with Import from the desktop into this WaveBurner project. Working in Regions tab all the time I did not realize that when I switched to the CD tracks tab there was nothing there. No regions and title list. So I made a new project and imported the audio files again making sure the CD tracks tab was selected refore. After that regions and listings were there both in regiones and CD tracks tab. I think Import
should have taken care of that. I don't get it why there was nothing when I clicked the CD track tab.
W.W.

TBridge must have at least one redirect command error!

Similar Messages

Maybe you are looking for